imx: cortexa53: remove KSZ9477 static driver

The KSZ9477 driver was added to the cortexa53 kernel to support the
Gateworks Venice product family which has a board with this switch. Now
that the kmod-dsa-ksz9477 driver is available as a package remove the
static configuration ad add the package.

This resolves an issue caused by having the switch driver static and the
PHY driver as a module such that the PHY driver was not registered early
enough to be used causing some errata to not be worked around.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Link: https://github.com/openwrt/openwrt/pull/22120
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 231553b280)

.gitattributes

@@ -1,2 +1,4 @@
 * -text
 *.patch whitespace=-indent-with-non-tab,-space-before-tab,-tab-in-indent,-trailing-space
+*.dts text eol=lf
+*.dts[io] text eol=lf

.github/labeler.yml

@@ -126,6 +126,12 @@
     - "target/linux/mediatek/**"
     - "package/boot/arm-trusted-firmware-mediatek/**"
     - "package/boot/uboot-mediatek/**"
+"target/microchipsw":
+- changed-files:
+  - any-glob-to-any-file:
+    - "target/linux/microchipsw/**"
+    - "package/boot/arm-trusted-firmware-microchipsw/**"
+    - "package/boot/uboot-microchipsw/**"
 "target/mpc85xx":
 - changed-files:
   - any-glob-to-any-file:

.github/workflows/formal.yml

@@ -5,8 +5,14 @@ on:
 
 permissions:
   contents: read
+  pull-requests: write
 
 jobs:
   build:
     name: Test Formalities
     uses: openwrt/actions-shared-workflows/.github/workflows/formal.yml@main
+    # with:
+    #   # Post formality check summaries to the PR.
+    #   # Repo's permissions need to be updated for actions to modify PRs:
+    #   # https://docs.github.com/en/rest/issues/comments?apiVersion=2022-11-28#create-an-issue-comment
+    #   post_comment: true

config/Config-build.in

@@ -108,6 +108,7 @@ menu "Global build settings"
 	config CLEAN_IPKG
 		bool
 		prompt "Remove ipkg/opkg status data files in final images"
+		depends on !USE_APK
 		help
 		  This removes all ipkg/opkg status data files from the target directory
 		  before building the root filesystem.
@@ -250,6 +251,15 @@ menu "Global build settings"
 
 	comment "Hardening build options"
 
+	config PKG_FANALYZER
+		bool
+		prompt "Enable gcc fanalyzer"
+		default n
+		help
+		  Add -fanalyzer to the CFLAGS. As a result of this option, a static analysis
+		  of the program flow is conducted, allowing interprocedural paths to be
+		  identified and warnings to be issued if problems are identified.
+
 	config PKG_CHECK_FORMAT_SECURITY
 		bool
 		prompt "Enable gcc format-security"

config/Config-images.in

@@ -18,6 +18,7 @@ menu "Target Images"
 			default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_mpc85xx
 			default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ramips
 			default TARGET_INITRAMFS_COMPRESSION_ZSTD if TARGET_qualcommax
+			default TARGET_INITRAMFS_COMPRESSION_ZSTD if TARGET_microchipsw
 			default TARGET_INITRAMFS_COMPRESSION_XZ if USES_SEPARATE_INITRAMFS
 			default TARGET_INITRAMFS_COMPRESSION_NONE
 			depends on TARGET_ROOTFS_INITRAMFS
@@ -335,7 +336,7 @@ menu "Target Images"
 		int "Root filesystem partition size (in MiB)"
 		depends on USES_ROOTFS_PART || TARGET_ROOTFS_EXT4FS
 		default 232 if TARGET_loongarch64
-		default 448 if TARGET_mediatek
+		default 448 if TARGET_mediatek || TARGET_microchipsw
 		default 104
 		help
 		  Select the root filesystem partition size.

config/Config-kernel.in

@@ -597,14 +597,12 @@ choice
 
 	config KERNEL_TRANSPARENT_HUGEPAGE_NEVER
 		bool "never"
-		depends on !LINUX_6_6
 endchoice
 
 config KERNEL_ARM64_CONTPTE
 	bool "Compile the kernel with Contiguous PTE mappings for user memory"
-	depends on KERNEL_ARM64
+	depends on aarch64
 	depends on KERNEL_TRANSPARENT_HUGEPAGE
-	depends on !LINUX_6_6
 	default y
 
 config KERNEL_HUGETLBFS
@@ -862,7 +860,6 @@ if KERNEL_CGROUPS
 	config KERNEL_CPUSETS_V1
 		bool "Legacy cgroup v1 cpusets controller"
 		depends on KERNEL_CPUSETS
-		depends on !LINUX_6_6
 		default n
 		help
 		  Legacy cgroup v1 cpusets controller which has been deprecated by
@@ -921,7 +918,6 @@ if KERNEL_CGROUPS
 		bool "Legacy cgroup v1 memory controller"
 		default n
 		depends on KERNEL_MEMCG
-		depends on !LINUX_6_6
 		help
 		  Legacy cgroup v1 memory controller which has been deprecated by
 		  cgroup v2 implementation. The v1 is there for legacy applications
@@ -1185,6 +1181,7 @@ config KERNEL_NET_L3_MASTER_DEV
 config KERNEL_DCB
 	bool "Data Center Bridging support"
 	default y if TARGET_armsr_armv8
+	default y if TARGET_microchipsw
 	default y if TARGET_x86_64
 	help
 	  This enables support for configuring Data Center Bridging (DCB)

feeds.conf.default

@@ -1,8 +1,5 @@
-src-git packages https://git.openwrt.org/feed/packages.git
-src-git luci https://git.openwrt.org/project/luci.git
-src-git routing https://git.openwrt.org/feed/routing.git
-src-git telephony https://git.openwrt.org/feed/telephony.git
-src-git video https://github.com/openwrt/video.git
-#src-git targets https://github.com/openwrt/targets.git
-#src-git oldpackages http://git.openwrt.org/packages.git
-#src-link custom /usr/src/openwrt/custom-feed
+src-git packages https://git.openwrt.org/feed/packages.git;openwrt-25.12
+src-git luci https://git.openwrt.org/project/luci.git;openwrt-25.12
+src-git routing https://git.openwrt.org/feed/routing.git;openwrt-25.12
+src-git telephony https://git.openwrt.org/feed/telephony.git;openwrt-25.12
+src-git video https://github.com/openwrt/video.git;openwrt-25.12

include/cmake.mk

@@ -89,8 +89,8 @@ endif
 define Build/Configure/Default
 	mkdir -p $(CMAKE_BINARY_DIR)
 	(cd $(CMAKE_BINARY_DIR); \
-		CFLAGS="$(TARGET_CFLAGS) $(EXTRA_CFLAGS)" \
-		CXXFLAGS="$(TARGET_CXXFLAGS) $(EXTRA_CXXFLAGS)" \
+		CFLAGS="$(TARGET_CFLAGS) $(EXTRA_CFLAGS) $(TARGET_CPPFLAGS) $(EXTRA_CPPFLAGS)" \
+		CXXFLAGS="$(TARGET_CXXFLAGS) $(EXTRA_CXXFLAGS) $(TARGET_CPPFLAGS) $(EXTRA_CPPFLAGS)" \
 		LDFLAGS="$(TARGET_LDFLAGS) $(EXTRA_LDFLAGS)" \
 		cmake \
 			--no-warn-unused-cli \

include/hardening.mk

@@ -9,6 +9,7 @@ PKG_SSP ?= 1
 PKG_FORTIFY_SOURCE ?= 1
 PKG_RELRO ?= 1
 PKG_DT_RELR ?= 1
+PKG_FANALYZER ?= 0
 
 ifdef CONFIG_PKG_CHECK_FORMAT_SECURITY
   ifeq ($(strip $(PKG_CHECK_FORMAT_SECURITY)),1)
@@ -77,3 +78,8 @@ ifdef CONFIG_PKG_DT_RELR
   endif
 endif
 
+ifdef CONFIG_PKG_FANALYZER
+  ifeq ($(strip $(PKG_FANALYZER)),1)
+    TARGET_CFLAGS +=  -fanalyzer
+  endif
+endif

include/image-commands.mk

@@ -430,7 +430,7 @@ define Build/initrd_compression
 	$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_ZSTD),.zstd)
 endef
 
-define Build/fit
+define Build/fit-its
 	$(if $(findstring with-rootfs,$(word 3,$(1))), \
 		$(call locked,dd if=$(IMAGE_ROOTFS) of=$(IMAGE_ROOTFS).pagesync bs=4096 conv=sync, \
 		  gen-cpio$(if $(TARGET_PER_DEVICE_ROOTFS),.$(ROOTFS_ID/$(DEVICE_NAME)))))
@@ -452,12 +452,20 @@ define Build/fit
 		$(if $(DEVICE_DTS_OVERLAY),$(foreach dtso,$(DEVICE_DTS_OVERLAY), -O $(dtso):$(KERNEL_BUILD_DIR)/image-$(dtso).dtbo)) \
 		-c $(if $(DEVICE_DTS_CONFIG),$(DEVICE_DTS_CONFIG),"config-1") \
 		-A $(LINUX_KARCH) -v $(LINUX_VERSION)
+endef
+
+define Build/fit-image
 	$(call locked,PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage $(if $(findstring external,$(word 3,$(1))),\
 		-E -B 0x1000 $(if $(findstring static,$(word 3,$(1))),-p 0x1000)) -f $@.its $@.new, \
 	  gen-cpio$(if $(TARGET_PER_DEVICE_ROOTFS),.$(ROOTFS_ID/$(DEVICE_NAME))))
 	@mv $@.new $@
 endef
 
+define Build/fit
+	$(call Build/fit-its,$(1))
+	$(call Build/fit-image,$(1))
+endef
+
 define Build/libdeflate-gzip
 	$(STAGING_DIR_HOST)/bin/libdeflate-gzip -f -12 -c $@ $(1) > $@.new
 	@mv $@.new $@

include/image.mk

@@ -41,6 +41,9 @@ KDIR=$(KERNEL_BUILD_DIR)
 KDIR_TMP=$(KDIR)/tmp
 DTS_DIR:=$(LINUX_DIR)/arch/$(LINUX_KARCH)/boot/dts
 
+ifeq ($(EXTRA_IMAGE_NAME),)
+EXTRA_IMAGE_NAME:=$(call qstrip,$(CONFIG_EXTRA_IMAGE_NAME))
+endif
 IMG_PREFIX_EXTRA:=$(if $(EXTRA_IMAGE_NAME),$(call sanitize,$(EXTRA_IMAGE_NAME))-)
 IMG_PREFIX_VERNUM:=$(if $(CONFIG_VERSION_FILENAMES),$(call sanitize,$(VERSION_NUMBER))-)
 IMG_PREFIX_VERCODE:=$(if $(CONFIG_VERSION_CODE_FILENAMES),$(call sanitize,$(VERSION_CODE))-)
@@ -114,6 +117,7 @@ fs-types-$(CONFIG_TARGET_ROOTFS_JFFS2_NAND) += $(addprefix jffs2-nand-,$(NAND_BL
 fs-types-$(CONFIG_TARGET_ROOTFS_EXT4FS) += ext4
 fs-types-$(CONFIG_TARGET_ROOTFS_UBIFS) += ubifs
 fs-types-$(CONFIG_TARGET_ROOTFS_EROFS) += erofs
+fs-types-$(CONFIG_TARGET_ROOTFS_TARGZ) += targz
 fs-subtypes-$(CONFIG_TARGET_ROOTFS_JFFS2) += $(addsuffix -raw,$(addprefix jffs2-,$(JFFS2_BLOCKSIZE)))
 
 TARGET_FILESYSTEMS := $(fs-types-y)
@@ -326,6 +330,12 @@ define Image/mkfs/erofs
 		$@ $(call mkfs_target_dir,$(1))
 endef
 
+define Image/mkfs/targz
+	$(TAR) -cp --numeric-owner --owner=0 --group=0 --mode=a-s --sort=name \
+		$(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+		-C $(call mkfs_target_dir,$(1)) . | gzip -9n > $@
+endef
+
 define Image/Manifest
 	$(if $(CONFIG_USE_APK), \
 		$(call apk,$(TARGET_DIR_ORIG)) list --quiet --manifest --no-network \

include/kernel-defaults.mk

@@ -25,7 +25,6 @@ ifeq ($(strip $(CONFIG_EXTERNAL_KERNEL_TREE)),"")
     define Kernel/Prepare/Default
 	$(LINUX_CAT) $(DL_DIR)/$(LINUX_SOURCE) | $(TAR) -C $(KERNEL_BUILD_DIR) $(TAR_OPTIONS)
 	$(Kernel/Patch)
-	$(if $(QUILT),touch $(LINUX_DIR)/.quilt_used)
     endef
   else
     define Kernel/Prepare/Default

include/kernel.mk

@@ -306,4 +306,3 @@ kernel_patchver_ge=$(call kernel_version_cmp,-ge,$(KERNEL_PATCHVER),$(1))
 kernel_patchver_eq=$(call kernel_version_cmp,-eq,$(KERNEL_PATCHVER),$(1))
 kernel_patchver_le=$(call kernel_version_cmp,-le,$(KERNEL_PATCHVER),$(1))
 kernel_patchver_lt=$(call kernel_version_cmp,-lt,$(KERNEL_PATCHVER),$(1))
-

include/package-pack.mk

@@ -78,6 +78,196 @@ define FixupDependencies
   $(call AddDependency,$(1),$$(DEPS))
 endef
 
+# Format dependencies and extra dependencies
+#
+# ABI-version EXTRA_DEPENDS so dependencies can be correctly looked up using the
+# existing semantics without the ABI specified. This is needed since ABI-
+# versioned libraries don't provide `${package_name}=${package_version}`, so
+# that same library but with different ABI versions can be installed side by
+# side.
+#
+# Remove duplicate dependencies when EXTRA_DEPENDS specifies a versioned one
+# that is already in DEPENDS.
+#
+# 1: list of dependencies
+# 2: list of extra dependencies
+define FormatDepends
+$(strip
+  $(eval _COMMA_SEP := __COMMA_SEP__)
+  $(eval _SPACE_SEP := __SPACE_SEP__)
+  $(eval _DEPENDS := $(1))
+  $(eval _EXTRA_DEPENDS_ABI := )
+  $(eval _DEP_ITEMS := $(subst $(_COMMA_SEP),$(space),$(subst $(space),$(_SPACE_SEP),$(subst $(comma),$(_COMMA_SEP),$(2)))))
+
+  $(foreach dep,$(_DEP_ITEMS),
+    $(eval _EXTRA_DEP := )
+    $(eval _CUR_DEP := $(subst $(_SPACE_SEP),$(space),$(strip $(dep))))
+    $(eval _PKG_NAME := $(word 1,$(_CUR_DEP)))
+    $(if $(findstring $(paren_left), $(_PKG_NAME)),
+      $(error "Unsupported extra dependency format: no space before '(': $(_CUR_DEP)"))
+    )
+    $(eval _ABI_SUFFIX := $(call GetABISuffix,$(_PKG_NAME)))
+    $(eval _PKG_NAME_ABI := $(_PKG_NAME)$(_ABI_SUFFIX))
+    $(eval _VERSION_CONSTRAINT := $(word 2,$(_CUR_DEP)))
+    $(if $(_VERSION_CONSTRAINT),
+      $(eval _EXTRA_DEP := $(_PKG_NAME_ABI) $(_VERSION_CONSTRAINT)),
+      $(error "Extra dependencies must have version constraints. $(_PKG_NAME) seems to be unversioned.")
+    )
+    $(if $(and $(_EXTRA_DEPENDS_ABI),$(_EXTRA_DEP)),
+      $(eval _EXTRA_DEPENDS_ABI := $(_EXTRA_DEPENDS_ABI)$(comma)$(_EXTRA_DEP)),
+      $(eval _EXTRA_DEPENDS_ABI := $(_EXTRA_DEP))
+    )
+    $(if $(_DEPENDS),
+      $(eval _DEPENDS := $(filter-out $(_PKG_NAME_ABI),$(_DEPENDS)))
+    )
+  )
+
+  $(eval _DEPENDS := $(call mergelist,$(_DEPENDS)))
+  $(_EXTRA_DEPENDS_ABI)$(if $(_DEPENDS),$(comma) $(_DEPENDS))
+)
+endef
+
+# Format provide and add ABI and version if it's not a virtual provide marked
+# with an @.
+#
+# Same as for the base package name, if ABI version is set, provide both
+# unversioned provide and one with ABI version and version.
+#
+# 1: provide name
+# 2: provide version
+# 3: (optional) ABI version
+define AddProvide
+$(strip
+  $(if $(filter @%,$(1)),
+    $(patsubst @%,%,$(1)),
+    $(if $(3),
+      $(1) $(1)$(call FormatABISuffix,$(1),$(3))=$(2),
+      $(1)=$(2)
+    )
+  )
+)
+endef
+
+# Remove virtual provides prefix and self. apk doesn't like it when packages
+# specify a redundant provide pointing to self.
+#
+# 1: package name
+# 2: list of provides
+define SanitizeProvides
+$(filter-out $(1),$(patsubst @%,%,$(2)))
+endef
+
+# Format provides both for apk and control
+#
+# - If ABI version is defined:
+#   - package is named `${package_name}${ABI_version}`
+#     if a `package_name` ends in a number, the `ABI_version` will be prefixed
+#     with a - sign, e.g.: libsqlite3-0
+#   - package implicitly provides
+#     `${package_name}${ABI_version}=${package_version}`
+#     this implies that only one version of a package per ABI can be installed
+#     at the same time
+#   - additionally provide `${package_name}` so multiple packages can be looked
+#     up by its base name
+#   - for each `provides`:
+#     - provide `${provide}${ABI_version}=${package_version}`
+#       this implies that only one version of a provide can be installed at the
+#       same time
+#     - if a `provide` ends in a number, the `ABI_version` will be prefixed with
+#       a - sign, e.g.: provide1-0
+#     - additionally provide `${provide}` so multiple packages can be looked up
+#       by its base name
+#
+# - else if ABI version is _not_ defined
+#   - package is named `${package_name}`
+#   - package implicitly provides `${package_name}=${package_version}`
+#     this implies that only one version of a package can be installed at the
+#     same time
+#   - for each `provides`, provide `${provide}=${package_version}` this implies
+#     that only one version of a provide can be installed at the same time
+#
+# - Both with and without an ABI, if a provide starts with an @, treat it as a
+#   virtual provide, that doesn't own the name by not appending version.
+#   Multiple packages with the same virtual provides can be installed
+#   side-by-side.
+#
+# - apk doesn't like it when packages specify a redundant provide pointing to
+#   self. Filter it out, but keep virtual self provides, in the form of
+#   @(kmod-)?${package_name}-any.
+#
+# - Packages implicitly add a virtual @${package_name}-any provide in Package,
+#   which implies that kmods, which are also packages, will have a virtual
+#   @kmod-${package_name}-any provide.
+#
+# - Aside from the two aforementioned implicit provides, packages are expected
+#   to manage their provides themselves.
+#
+# - When multiple variants inside the same package have the same provide, a
+#   default variant must be set using DEFAULT_VARIANT:=1.
+#
+# - Cross-package provides must be virtual and a default variant must be set. If
+#   different packages provide the same versioned (i.e. non-virtual) provide the
+#   package with a higher version will be preferred, which results in unintended
+#   behavior, because the order might change with package updates.
+#
+#   Example:
+#   - both uclient-fetch and wget provide wget
+#   - wget doesn't have a default variant called wget that would provide an
+#     implicit @wget-any
+#     - add wget to PROVIDES for both wget-ssl and wget-nossl variants so they
+#       can't be installed at the same time
+#     - add @wget-any to both packages so packages outside of wget can provide
+#       it
+#   - uclient-fetch has only one variant
+#     - add @wget-any to PROVIDES
+#     - mark uclient-fetch as the default variant using DEFAULT_VARIANT:=1
+#   - switch wget consumer that don't depend on a specific version like apk to
+#     depend on @wget-any
+#
+# - Alternatives don't affect the packaging.
+#
+# 1: package name
+# 2: package version
+# 3: ABI version
+# 4: list of provides
+define FormatProvides
+$(strip \
+  $(if $(call FormatABISuffix,$(1),$(3)), \
+    $(1) $(foreach provide, \
+      $(filter-out $(1),$(4)), \
+      $(call AddProvide,$(provide),$(2),$(3)) \
+    ), \
+    $(foreach provide, \
+      $(filter-out $(1),$(4)), \
+      $(call AddProvide,$(provide),$(2)) \
+    ) \
+  ) \
+)
+endef
+
+# Get apk provider priority
+#
+# - if a package is marked as a default variant, set it to 100.
+#
+# - if a package has an ABI version defined, set it to 10.
+#   The enables packages with an ABI version to be installed by their base name
+#   instead of a name and an ABI version, e.g.:
+#   libfoo3, where 3 is the ABI version can be installed by just libfoo.
+#   This affects manual installation only, as the dependency resolution takes
+#   care of ABI versions.
+#
+# - otherwise return nothing, i.e. package will have the default priority 0.
+#
+# 1: Default variant
+# 2: ABI version
+define GetProviderPriority
+$(strip
+  $(if $(1),100,
+    $(if $(2),10)
+  )
+)
+endef
+
 ifneq ($(PKG_NAME),toolchain)
   define CheckDependencies
 	@( \
@@ -191,17 +381,33 @@ endif
     $(STAGING_DIR_ROOT)/stamp/.$(1)_installed: $(PKG_BUILD_DIR)/.pkgdir/$(1).installed
 	mkdir -p $(STAGING_DIR_ROOT)/stamp
 	$(if $(ABI_VERSION),echo '$(ABI_VERSION)' | cmp -s - $(PKG_INFO_DIR)/$(1).version || { \
+		mkdir -p $(PKG_INFO_DIR); \
 		echo '$(ABI_VERSION)' > $(PKG_INFO_DIR)/$(1).version; \
-		$(foreach pkg,$(filter-out $(1),$(PROVIDES)), \
+		$(foreach pkg,$(call SanitizeProvides,$(1),$(PROVIDES)), \
 			cp $(PKG_INFO_DIR)/$(1).version $(PKG_INFO_DIR)/$(pkg).version; \
 		) \
 	} )
 	$(call locked,$(CP) $(PKG_BUILD_DIR)/.pkgdir/$(1)/. $(STAGING_DIR_ROOT)/,root-copy)
 	touch $$@
 
-    Package/$(1)/DEPENDS := $$(call mergelist,$$(foreach dep,$$(filter-out @%,$$(IDEPEND_$(1))),$$(dep)$$(call GetABISuffix,$$(dep))))
+    Package/$(1)/DEPENDS := $$(foreach dep,$$(filter-out @%,$$(IDEPEND_$(1))),$$(dep)$$(call GetABISuffix,$$(dep)))
     ifneq ($$(EXTRA_DEPENDS),)
-      Package/$(1)/DEPENDS := $$(EXTRA_DEPENDS)$$(if $$(Package/$(1)/DEPENDS),$$(comma) $$(Package/$(1)/DEPENDS))
+      ifeq ($(CONFIG_USE_APK),)
+        Package/$(1)/DEPENDS := $$(call mergelist,$$(Package/$(1)/DEPENDS))
+        Package/$(1)/DEPENDS := $$(EXTRA_DEPENDS)$$(if $$(Package/$(1)/DEPENDS),$$(comma) $$(Package/$(1)/DEPENDS))
+      else
+        Package/$(1)/DEPENDS := $$(call FormatDepends,$$(Package/$(1)/DEPENDS),$$(EXTRA_DEPENDS))
+      endif
+    else
+      Package/$(1)/DEPENDS := $$(call mergelist,$$(Package/$(1)/DEPENDS))
+    endif
+
+    ifeq ($(CONFIG_USE_APK),)
+      Package/$(1)/PROVIDES := $$(patsubst @%,%,$(PROVIDES))
+      Package/$(1)/PROVIDES := $$(filter-out $(1)$$(ABIV_$(1)),$$(Package/$(1)/PROVIDES)$$(if $$(ABIV_$(1)), $(1) $$(foreach provide,$$(Package/$(1)/PROVIDES),$$(provide)$$(ABIV_$(1)))))
+    else
+      Package/$(1)/PROVIDES := $$(call FormatProvides,$(1),$(VERSION),$(ABI_VERSION),$(PROVIDES))
+      Package/$(1)/PRIORITY := $$(call GetProviderPriority,$(DEFAULT_VARIANT),$(ABI_VERSION))
     endif
 
 $(_define) Package/$(1)/CONTROL
@@ -209,7 +415,7 @@ Package: $(1)$$(ABIV_$(1))
 Version: $(VERSION)
 $$(call addfield,Depends,$$(Package/$(1)/DEPENDS)
 )$$(call addfield,Conflicts,$$(call mergelist,$(CONFLICTS))
-)$$(call addfield,Provides,$$(call mergelist,$$(filter-out $(1)$$(ABIV_$(1)),$(PROVIDES)$$(if $$(ABIV_$(1)), $(1) $(foreach provide,$(PROVIDES),$(provide)$$(ABIV_$(1))))))
+)$$(call addfield,Provides,$$(call mergelist,$$(Package/$(1)/PROVIDES))
 )$$(call addfield,Alternatives,$$(call mergelist,$(ALTERNATIVES))
 )$$(call addfield,Source,$(SOURCE)
 )$$(call addfield,SourceName,$(PKG_NAME)
@@ -253,7 +459,7 @@ endif
 			fi; \
 		done; $(Package/$(1)/extra_provides) \
 	) | sort -u > $(PKG_INFO_DIR)/$(1).provides
-	$(if $(PROVIDES),@for pkg in $(filter-out $(1),$(PROVIDES)); do cp $(PKG_INFO_DIR)/$(1).provides $(PKG_INFO_DIR)/$$$$pkg.provides; done)
+	$(if $(PROVIDES),@for pkg in $(call SanitizeProvides,$(1),$(PROVIDES)); do cp $(PKG_INFO_DIR)/$(1).provides $(PKG_INFO_DIR)/$$$$pkg.provides; done)
 	$(CheckDependencies)
 
 	$(RSTRIP) $$(IDIR_$(1))
@@ -280,7 +486,7 @@ endif
 		)
     endif
 
-	$(INSTALL_DIR) $$(PDIR_$(1))/tmp
+	$(INSTALL_DIR) $$(PDIR_$(1))
 
 ifeq ($(CONFIG_USE_APK),)
 	mkdir -p $$(IDIR_$(1))/CONTROL
@@ -320,24 +526,24 @@ else
 		echo "[ -s "\$$$${IPKG_INSTROOT}/lib/functions.sh" ] || exit 0"; \
 		echo ". \$$$${IPKG_INSTROOT}/lib/functions.sh"; \
 		echo 'export root="$$$${IPKG_INSTROOT}"'; \
-		echo 'export pkgname="$(1)"'; \
+		echo 'export pkgname="$(1)$$(ABIV_$(1))"'; \
 		echo "add_group_and_user"; \
 		echo "default_postinst"; \
-		[ ! -f $$(ADIR_$(1))/postinst-pkg ] || sed -z 's/^\s*#!/#!/' "$$(ADIR_$(1))/postinst-pkg"; \
+		[ ! -f $$(ADIR_$(1))/postinst-pkg ] || sed '/^\s*#!/d' "$$(ADIR_$(1))/postinst-pkg"; \
 	) > $$(ADIR_$(1))/post-install;
 
     ifdef Package/$(1)/preinst
 	( \
 		echo "#!/bin/sh"; \
 		echo 'export PKG_UPGRADE=1'; \
-		[ ! -f $$(ADIR_$(1))/preinst ] || sed -z 's/^\s*#!/#!/' "$$(ADIR_$(1))/preinst"; \
+		[ ! -f $$(ADIR_$(1))/preinst ] || sed '/^\s*#!/d' "$$(ADIR_$(1))/preinst"; \
 	) > $$(ADIR_$(1))/pre-upgrade;
     endif
 
 	( \
 		echo "#!/bin/sh"; \
 		echo 'export PKG_UPGRADE=1'; \
-		[ ! -f $$(ADIR_$(1))/post-install ] || sed -z 's/^\s*#!/#!/' "$$(ADIR_$(1))/post-install"; \
+		[ ! -f $$(ADIR_$(1))/post-install ] || sed '/^\s*#!/d' "$$(ADIR_$(1))/post-install"; \
 	) > $$(ADIR_$(1))/post-upgrade;
 
 	( \
@@ -345,34 +551,34 @@ else
 		echo "[ -s "\$$$${IPKG_INSTROOT}/lib/functions.sh" ] || exit 0"; \
 		echo ". \$$$${IPKG_INSTROOT}/lib/functions.sh"; \
 		echo 'export root="$$$${IPKG_INSTROOT}"'; \
-		echo 'export pkgname="$(1)"'; \
+		echo 'export pkgname="$(1)$$(ABIV_$(1))"'; \
 		echo "default_prerm"; \
-		[ ! -f $$(ADIR_$(1))/prerm-pkg ] || sed -z 's/^\s*#!/#!/' "$$(ADIR_$(1))/prerm-pkg"; \
+		[ ! -f $$(ADIR_$(1))/prerm-pkg ] || sed '/^\s*#!/d' "$$(ADIR_$(1))/prerm-pkg"; \
 	) > $$(ADIR_$(1))/pre-deinstall;
 
 	[ ! -f $$(ADIR_$(1))/postrm ] || sed -zi 's/^\s*#!/#!/' "$$(ADIR_$(1))/postrm";
 
-	if [ -n "$(USERID)" ]; then echo $(USERID) > $$(IDIR_$(1))/lib/apk/packages/$(1).rusers; fi;
-	if [ -n "$(ALTERNATIVES)" ]; then echo $(ALTERNATIVES) > $$(IDIR_$(1))/lib/apk/packages/$(1).alternatives; fi;
-	(cd $$(IDIR_$(1)) && find . -type f,l -printf "/%P\n" | sort > $(TMP_DIR)/$(1).list && mv $(TMP_DIR)/$(1).list $$(IDIR_$(1))/lib/apk/packages/$(1).list)
+	if [ -n "$(USERID)" ]; then echo $(USERID) > $$(IDIR_$(1))/lib/apk/packages/$(1)$$(ABIV_$(1)).rusers; fi;
+	if [ -n "$(ALTERNATIVES)" ]; then echo $(ALTERNATIVES) > $$(IDIR_$(1))/lib/apk/packages/$(1)$$(ABIV_$(1)).alternatives; fi;
+	(cd $$(IDIR_$(1)) && find . -type f,l -printf "/%P\n" | sort > $(TMP_DIR)/$(1).list && mv $(TMP_DIR)/$(1).list $$(IDIR_$(1))/lib/apk/packages/$(1)$$(ABIV_$(1)).list)
 	# Move conffiles to IDIR and build conffiles_static with csums
 	if [ -f $$(ADIR_$(1))/conffiles ]; then \
-		mv -f $$(ADIR_$(1))/conffiles $$(IDIR_$(1))/lib/apk/packages/$(1).conffiles; \
-		for file in $$$$(cat $$(IDIR_$(1))/lib/apk/packages/$(1).conffiles); do \
+		mv -f $$(ADIR_$(1))/conffiles $$(IDIR_$(1))/lib/apk/packages/$(1)$$(ABIV_$(1)).conffiles; \
+		for file in $$$$(cat $$(IDIR_$(1))/lib/apk/packages/$(1)$$(ABIV_$(1)).conffiles); do \
 			[ -f $$(IDIR_$(1))/$$$$file ] || continue; \
 			csum=$$$$($(MKHASH) sha256 $$(IDIR_$(1))/$$$$file); \
-			echo $$$$file $$$$csum >> $$(IDIR_$(1))/lib/apk/packages/$(1).conffiles_static; \
+			echo $$$$file $$$$csum >> $$(IDIR_$(1))/lib/apk/packages/$(1)$$(ABIV_$(1)).conffiles_static; \
 		done; \
 	fi
 
 	# Some package (base-files) manually append stuff to conffiles
 	# Append stuff from it and delete the CONTROL directory since everything else should be migrated
 	if [ -f $$(IDIR_$(1))/CONTROL/conffiles ]; then \
-		echo $$$$(IDIR_$(1))/CONTROL/conffiles >> $$(IDIR_$(1))/lib/apk/packages/$(1).conffiles; \
+		echo $$$$(IDIR_$(1))/CONTROL/conffiles >> $$(IDIR_$(1))/lib/apk/packages/$(1)$$(ABIV_$(1)).conffiles; \
 		for file in $$$$(cat $$(IDIR_$(1))/CONTROL/conffiles); do \
 			[ -f $$(IDIR_$(1))/$$$$file ] || continue; \
 			csum=$$$$($(MKHASH) sha256 $$(IDIR_$(1))/$$$$file); \
-			echo $$$$file $$$$csum >> $$(IDIR_$(1))/lib/apk/packages/$(1).conffiles_static; \
+			echo $$$$file $$$$csum >> $$(IDIR_$(1))/lib/apk/packages/$(1)$$(ABIV_$(1)).conffiles_static; \
 		done; \
 		rm -rf $$(IDIR_$(1))/CONTROL/conffiles; \
 	fi
@@ -394,17 +600,8 @@ else
 	  --info "origin:$(SOURCE)" \
 	  --info "url:$(URL)" \
 	  --info "maintainer:$(MAINTAINER)" \
-	  --info "provides:$$(foreach prov,\
-			$$(filter-out $(1)$$(ABIV_$(1)), \
-			$(PROVIDES)$$(if $$(ABIV_$(1)), \
-				$(1)=$(VERSION) $(foreach provide, \
-					$(PROVIDES), \
-					$(provide)$$(ABIV_$(1))=$(VERSION) \
-				) \
-			) \
-		), \
-		$$(prov) )" \
-	  $(if $(DEFAULT_VARIANT),--info "provider-priority:100",$(if $(PROVIDES),--info "provider-priority:1")) \
+	  $$(if $$(Package/$(1)/PROVIDES),--info "provides:$$(Package/$(1)/PROVIDES)") \
+	  $$(if $$(Package/$(1)/PRIORITY),--info "provider-priority:$$(Package/$(1)/PRIORITY)") \
 	  $$(APK_SCRIPTS_$(1)) \
 	  --info "depends:$$(foreach depends,$$(subst $$(comma),$$(space),$$(subst $$(space),,$$(subst $$(paren_right),,$$(subst $$(paren_left),,$$(Package/$(1)/DEPENDS))))),$$(depends))" \
 	  --files "$$(IDIR_$(1))" \

include/package.mk

@@ -332,6 +332,13 @@ define BuildPackage
   $(eval $(Package/Default))
   $(eval $(Package/$(1)))
 
+  # Add an implicit self-provide. apk can't handle self provides, be it
+  # versioned or virtual, so opt for a suffix instead. This allows several
+  # variants to provide the same virtual package without adding extra provides
+  # to the default one, e.g. wget implicitly provides wget-any and is marked as
+  # default, so wget-ssl can explicitly provide @wget-any as well.
+  $(eval PROVIDES:=$(strip @$(1)-any $(PROVIDES)))
+
 ifdef DESCRIPTION
 $$(error DESCRIPTION:= is obsolete, use Package/PKG_NAME/description)
 endif

include/quilt.mk

@@ -103,6 +103,7 @@ define Kernel/Patch/Default
 	$(call PatchDir,$(LINUX_DIR),$(GENERIC_PATCH_DIR),generic/)
 	$(call PatchDir,$(LINUX_DIR),$(GENERIC_HACK_DIR),generic-hack/)
 	$(call PatchDir,$(LINUX_DIR),$(PATCH_DIR),platform/)
+	$(if $(QUILT),touch $(LINUX_DIR)/.quilt_used)
 endef
 
 define Quilt/RefreshDir

include/rootfs.mk

@@ -78,6 +78,7 @@ define prepare_rootfs
 		cd $(1); \
 		if [ -n "$(CONFIG_USE_APK)" ]; then \
 			IPKG_POSTINST_PATH=./lib/apk/db/*.post-install; \
+			$(STAGING_DIR_HOST)/bin/gzip -d ./lib/apk/db/scripts.tar; \
 			$(STAGING_DIR_HOST)/bin/tar -C ./lib/apk/db/ -xf ./lib/apk/db/scripts.tar --wildcards "*.post-install"; \
 		else \
 			IPKG_POSTINST_PATH=./usr/lib/opkg/info/*.postinst; \
@@ -91,6 +92,7 @@ define prepare_rootfs
 			fi; \
 			[ -n "$(CONFIG_USE_APK)" ] && $(STAGING_DIR_HOST)/bin/tar --delete -f ./lib/apk/db/scripts.tar $$(basename $$script); \
 		done; \
+		[ -n "$(CONFIG_USE_APK)" ] && $(STAGING_DIR_HOST)/bin/gzip -f -9n -S ".gz" ./lib/apk/db/scripts.tar; \
 		if [ -z "$(CONFIG_USE_APK)" ]; then \
 			$(if $(IB),,awk -i inplace \
 				'/^Status:/ { \

include/toplevel.mk

@@ -201,7 +201,7 @@ else
   DOWNLOAD_DIRS = package/download
 endif
 
-download: .config FORCE $(if $(wildcard $(STAGING_DIR_HOST)/bin/flock),,tools/flock/compile)
+download: .config FORCE $(if $(wildcard $(STAGING_DIR_HOST)/bin/flock),,tools/flock/compile) $(if $(wildcard $(STAGING_DIR_HOST)/bin/zstd),,tools/zstd/compile)
 	@+$(foreach dir,$(DOWNLOAD_DIRS),$(SUBMAKE) $(dir);)
 
 clean dirclean: .config

include/version.mk

@@ -27,13 +27,13 @@ PKG_CONFIG_DEPENDS += \
 sanitize = $(call tolower,$(subst _,-,$(subst $(space),-,$(1))))
 
 VERSION_NUMBER:=$(call qstrip,$(CONFIG_VERSION_NUMBER))
-VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),SNAPSHOT)
+VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),25.12-SNAPSHOT)
 
 VERSION_CODE:=$(call qstrip,$(CONFIG_VERSION_CODE))
 VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),$(REVISION))
 
 VERSION_REPO:=$(call qstrip,$(CONFIG_VERSION_REPO))
-VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/snapshots)
+VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/releases/25.12-SNAPSHOT)
 
 VERSION_DIST:=$(call qstrip,$(CONFIG_VERSION_DIST))
 VERSION_DIST:=$(if $(VERSION_DIST),$(VERSION_DIST),OpenWrt)

package/Makefile

@@ -129,6 +129,7 @@ $(curdir)/index: FORCE
 	@echo Generating package index...
 ifneq ($(CONFIG_USE_APK),)
 	@for d in $(PACKAGE_SUBDIRS); do \
+		set -e; \
 		mkdir -p $$d; \
 		cd $$d || continue; \
 		ls *.apk >/dev/null 2>&1 || continue; \

package/base-files/files/bin/board_detect

@@ -1,14 +1,22 @@
 #!/bin/sh
 
-CFG=$1
+REAL_CFG=$1
 
-[ -n "$CFG" ] || CFG=/etc/board.json
+[ -n "$REAL_CFG" ] || REAL_CFG=/etc/board.json
 
-[ -d "/etc/board.d/" -a ! -s "$CFG" ] && {
+if [ -d "/etc/board.d/" ] && [ ! -s "$REAL_CFG" ]; then
+	# Use temp file to prevent incomplete file on power-cut, CFG is used by the sourced script to read/write the file
+	CFG="$(dirname "$REAL_CFG")/.$(basename "$REAL_CFG").tmp"
+	rm -f "$CFG" || exit
 	for a in $(ls /etc/board.d/*); do
-		[ -s $a ] || continue;
-		$(. $a)
+		[ -s "$a" ] || continue
+		(. "$a")
 	done
-}
+fi
 
-[ -s "$CFG" ] || return 1
+if [ -s "$CFG" ]; then
+	mv "$CFG" "$REAL_CFG" || exit
+else
+	rm -f "$CFG"
+	exit 1
+fi

package/base-files/files/etc/profile

@@ -1,61 +1,39 @@
+unset FAILSAFE
 [ -e /tmp/.failsafe ] && export FAILSAFE=1
 
 [ -f /etc/banner ] && cat /etc/banner
-[ -n "$FAILSAFE" ] && cat /etc/banner.failsafe
+[ -n "$FAILSAFE" ] && [ -f /etc/banner.failsafe ] && cat /etc/banner.failsafe
 
-grep -Fsq '/ overlay ro,' /proc/mounts && {
-	echo 'Your JFFS2-partition seems full and overlayfs is mounted read-only.'
-	echo 'Please try to remove files from /overlay/upper/... and reboot!'
-}
+if grep -Fsq '/ overlay ro,' /proc/mounts ; then
+cat << EOF
+
+ === WARNING! ======================================
+ Your JFFS2-partition seems full and overlayfs is
+ mounted as READ-ONLY!
+ Please try to remove files from /overlay/upper/...
+ and reboot!
+ ---------------------------------------------------
+
+EOF
+fi
 
 export PATH="%PATH%"
-export HOME=$(grep -e "^${USER:-root}:" /etc/passwd | cut -d ":" -f 6)
-export HOME=${HOME:-/root}
+HOME=$(grep -E "^${USER:-root}:" /etc/passwd | cut -d ":" -f 6)
+HOME=${HOME:-/root}
+export HOME
 export PS1='\u@\h:\w\$ '
 export ENV=/etc/shinit
 
 case "$TERM" in
 	xterm*|rxvt*)
-		export PS1='\[\e]0;\u@\h: \w\a\]'$PS1
-		;;
+		export PS1='\[\e]0;\u@\h: \w\a\]'"$PS1"
+	;;
 esac
 
-[ -n "$FAILSAFE" ] || {
-	for FILE in /etc/profile.d/*.sh; do
-		[ -e "$FILE" ] && . "$FILE"
+if [ -z "$FAILSAFE" ] ; then
+	for FILE in /etc/profile.d/*.sh ; do
+		[ -f "${FILE%.sh}.hush" ] && continue
+		[ -f "$FILE" ] && . "$FILE"
 	done
 	unset FILE
-}
-
-if ( grep -qs '^root::' /etc/shadow && \
-     [ -z "$FAILSAFE" ] )
-then
-cat << EOF
-=== WARNING! =====================================
-There is no root password defined on this device!
-Use the "passwd" command to set up a new password
-in order to prevent unauthorized SSH logins.
---------------------------------------------------
-EOF
-fi
-
-if [ -x /usr/bin/apk ]; then
-cat << EOF
-
- OpenWrt recently switched to the "apk" package manager!
-
- OPKG Command           APK Equivalent      Description
- ------------------------------------------------------------------
- opkg install <pkg>     apk add <pkg>       Install a package
- opkg remove <pkg>      apk del <pkg>       Remove a package
- opkg upgrade           apk upgrade         Upgrade all packages
- opkg files <pkg>       apk info -L <pkg>   List package contents
- opkg list-installed    apk info            List installed packages
- opkg update            apk update          Update package lists
- opkg search <pkg>      apk search <pkg>    Search for packages
- ------------------------------------------------------------------
-
-For more https://openwrt.org/docs/guide-user/additional-software/opkg-to-apk-cheatsheet
-
-EOF
 fi

package/base-files/files/etc/profile.d/00-passwordless-root.sh

@@ -0,0 +1,11 @@
+if grep -Esq '^root::' /etc/shadow ; then
+cat << EOF
+
+ === WARNING! =====================================
+ There is no root password defined on this device!
+ Use the "passwd" command to set up a new password
+ in order to prevent unauthorized SSH logins.
+ --------------------------------------------------
+
+EOF
+fi

package/base-files/files/etc/profile.d/apk-cheatsheet.sh

@@ -0,0 +1,21 @@
+if [ -x /usr/bin/apk ] ; then
+cat << EOF
+
+ OpenWrt recently switched to the "apk" package manager!
+
+ OPKG Command           APK Equivalent      Description
+ ------------------------------------------------------------------
+ opkg install <pkg>     apk add <pkg>       Install a package
+ opkg remove <pkg>      apk del <pkg>       Remove a package
+ opkg upgrade           apk upgrade         Upgrade all packages
+ opkg files <pkg>       apk info -L <pkg>   List package contents
+ opkg list-installed    apk info            List installed packages
+ opkg update            apk update          Update package lists
+ opkg search <pkg>      apk search <pkg>    Search for packages
+ ------------------------------------------------------------------
+
+For more information visit:
+https://openwrt.org/docs/guide-user/additional-software/opkg-to-apk-cheatsheet
+
+EOF
+fi

package/base-files/files/etc/uci-defaults/14_network-generate-duid

@@ -1,4 +1,4 @@
-[ "$(uci -q get network.globals.dhcp_default_duid)" != "auto" ] && exit 0
+[ "$(uci -q get network.globals.dhcp_default_duid || echo "auto")" != "auto" ] && exit 0
 
 uci -q batch <<-EOF >/dev/null
 	# DUID-UUID - RFC6355

package/base-files/files/etc/uci-defaults/15_migrate-time-zonename

@@ -0,0 +1,6 @@
+zonename="$(uci -q get system.@system[0].zonename)"
+case "$zonename" in
+        *[[:space:]]*) uci set system.@system[0].zonename="${zonename// /_}" ;;
+esac
+
+exit 0

package/base-files/files/lib/functions.sh

@@ -382,7 +382,7 @@ default_postinst() {
 			uci commit
 		fi
 
-		rm -f /tmp/luci-indexcache
+		rm -f /tmp/luci-indexcache.*
 	fi
 
 	if [ -f "$root/usr/lib/opkg/info/${pkgname}.postinst-pkg" ]; then

package/base-files/files/lib/functions/network.sh

@@ -24,6 +24,17 @@ __network_ifstatus() {
 	eval "$__tmp"
 }
 
+# determine the IAID of the given logical interface
+# 1: destination variable
+# 2: interface
+network_generate_iface_iaid() {
+	local __iaid
+
+	__iaid=$(printf '%s' "$2" | md5sum | cut -c 1-8)
+
+	export "$1=$__iaid"
+}
+
 # determine first IPv4 address of given logical interface
 # 1: destination variable
 # 2: interface

package/base-files/image-config.in

@@ -5,6 +5,14 @@
 # See /LICENSE for more information.
 #
 
+config EXTRA_IMAGE_NAME
+	string
+	prompt "Extra image filename" if IMAGEOPT
+	default ""
+	help
+		Add this to the output image filenames, to distinguish between
+		different builds for the same hardware type.
+
 config TARGET_DEFAULT_LAN_IP_FROM_PREINIT
 	bool "Use preinit IP configuration as default LAN IP" if IMAGEOPT
 	default n
@@ -190,7 +198,7 @@ if VERSIONOPT
 	config VERSION_REPO
 		string
 		prompt "Release repository"
-		default "https://downloads.openwrt.org/snapshots"
+		default "https://downloads.openwrt.org/releases/25.12-SNAPSHOT"
 		help
 			This is the repository address embedded in the image, it defaults
 			to the trunk snapshot repo; the url may contain the following placeholders:

package/boot/arm-trusted-firmware-mediatek/Makefile

@@ -30,6 +30,7 @@ define Trusted-Firmware-A/Default
   BOOT_DEVICE:=
   DDR3_FLYBY:=
   DDR3_FREQ_1866:=
+  DDR4_4BG_MODE:=
   DDR_TYPE:=
   NAND_TYPE:=
   BOARD_QFN:=
@@ -139,6 +140,14 @@ define Trusted-Firmware-A/mt7622-sdmmc-2ddr
   DDR3_FLYBY:=1
 endef
 
+define Trusted-Firmware-A/mt7981-nor-ddr4
+  NAME:=MediaTek MT7981 (SPI-NOR, DDR4)
+  BOOT_DEVICE:=nor
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7981
+  DDR_TYPE:=ddr4
+endef
+
 define Trusted-Firmware-A/mt7981-ram-ddr4
   NAME:=MediaTek MT7981 (RAM, DDR4)
   BOOT_DEVICE:=ram
@@ -158,6 +167,14 @@ define Trusted-Firmware-A/mt7981-emmc-ddr4
   DDR_TYPE:=ddr4
 endef
 
+define Trusted-Firmware-A/mt7981-sdmmc-ddr4
+  NAME:=MediaTek MT7981 (SD card, DDR4)
+  BOOT_DEVICE:=sdmmc
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7981
+  DDR_TYPE:=ddr4
+endef
+
 define Trusted-Firmware-A/mt7981-spim-nand-ddr4
   NAME:=MediaTek MT7981 (SPI-NAND via SPIM, DDR4)
   BOOT_DEVICE:=spim-nand
@@ -186,14 +203,6 @@ define Trusted-Firmware-A/mt7981-ram-ddr3
   DEFAULT:=TARGET_mediatek_filogic
 endef
 
-define Trusted-Firmware-A/mt7981-nor-ddr4
-  NAME:=MediaTek MT7981 (SPI-NOR, DDR4)
-  BOOT_DEVICE:=nor
-  BUILD_SUBTARGET:=filogic
-  PLAT:=mt7981
-  DDR_TYPE:=ddr4
-endef
-
 define Trusted-Firmware-A/mt7981-emmc-ddr3
   NAME:=MediaTek MT7981 (eMMC, DDR3)
   BOOT_DEVICE:=emmc
@@ -244,8 +253,17 @@ define Trusted-Firmware-A/mt7981-spim-nand-ddr3-1866mhz
   DDR3_FREQ_1866:=1
 endef
 
-define Trusted-Firmware-A/mt7981-cudy-tr3000-v1
-  NAME:=Cudy TR3000 v1 (SPI-NAND via SPIM, DDR3)
+define Trusted-Firmware-A/mt7981-spim-nand-ubi-ddr4
+  NAME:=MediaTek MT7981 (SPI-NAND via SPIM, DDR4)
+  BOOT_DEVICE:=spim-nand
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7981
+  DDR_TYPE:=ddr4
+  USE_UBI:=1
+endef
+
+define Trusted-Firmware-A/mt7981-cudy-ddr3
+  NAME:=Cudy (SPI-NAND via SPIM, DDR3)
   BOOT_DEVICE:=spim-nand
   BUILD_SUBTARGET:=filogic
   PLAT:=mt7981
@@ -265,15 +283,6 @@ define Trusted-Firmware-A/mt7986-ram-ddr4
   DEFAULT:=TARGET_mediatek_filogic
 endef
 
-define Trusted-Firmware-A/mt7981-spim-nand-ubi-ddr4
-  NAME:=MediaTek MT7981 (SPI-NAND via SPIM, DDR4)
-  BOOT_DEVICE:=spim-nand
-  BUILD_SUBTARGET:=filogic
-  PLAT:=mt7981
-  DDR_TYPE:=ddr4
-  USE_UBI:=1
-endef
-
 define Trusted-Firmware-A/mt7986-nor-ddr4
   NAME:=MediaTek MT7986 (SPI-NOR, DDR4)
   BOOT_DEVICE:=nor
@@ -399,7 +408,14 @@ define Trusted-Firmware-A/mt7987-emmc-comb
   BOOT_DEVICE:=emmc
   BUILD_SUBTARGET:=filogic
   PLAT:=mt7987
-  DRAM_USE_COMB:=1
+endef
+
+define Trusted-Firmware-A/mt7987-emmc-ddr4-4bg
+  NAME:=MediaTek MT7987 (eMMC, DDR4 4GB)
+  BOOT_DEVICE:=emmc
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7987
+  DDR4_4BG_MODE:=1
 endef
 
 define Trusted-Firmware-A/mt7987-nor-comb
@@ -407,7 +423,6 @@ define Trusted-Firmware-A/mt7987-nor-comb
   BOOT_DEVICE:=nor
   BUILD_SUBTARGET:=filogic
   PLAT:=mt7987
-  DRAM_USE_COMB:=1
 endef
 
 define Trusted-Firmware-A/mt7987-sdmmc-comb
@@ -415,7 +430,22 @@ define Trusted-Firmware-A/mt7987-sdmmc-comb
   BOOT_DEVICE:=sdmmc
   BUILD_SUBTARGET:=filogic
   PLAT:=mt7987
-  DRAM_USE_COMB:=1
+endef
+
+define Trusted-Firmware-A/mt7987-sdmmc-ddr4-4bg
+  NAME:=MediaTek MT7987 (SD card, DDR4 4GB)
+  BOOT_DEVICE:=sdmmc
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7987
+  DDR4_4BG_MODE:=1
+endef
+
+define Trusted-Firmware-A/mt7987-spim-nand0
+  NAME:=MediaTek MT7987 (SPI-NAND via SPIM)
+  BOOT_DEVICE:=spim-nand
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7987
+  SPIM_CTRL:=0
 endef
 
 define Trusted-Firmware-A/mt7987-spim-nand0-ubi-comb
@@ -423,7 +453,6 @@ define Trusted-Firmware-A/mt7987-spim-nand0-ubi-comb
   BOOT_DEVICE:=spim-nand
   BUILD_SUBTARGET:=filogic
   PLAT:=mt7987
-  DRAM_USE_COMB:=1
   USE_UBI:=1
   SPIM_CTRL:=0
 endef
@@ -433,7 +462,6 @@ define Trusted-Firmware-A/mt7987-spim-nand2-ubi-comb
   BOOT_DEVICE:=spim-nand
   BUILD_SUBTARGET:=filogic
   PLAT:=mt7987
-  DRAM_USE_COMB:=1
   USE_UBI:=1
   SPIM_CTRL:=2
 endef
@@ -443,7 +471,6 @@ define Trusted-Firmware-A/mt7987-ram-comb
   BOOT_DEVICE:=ram
   BUILD_SUBTARGET:=filogic
   PLAT:=mt7987
-  DRAM_USE_COMB:=1
   RAM_BOOT_UART_DL:=1
   HIDDEN:=
   DEFAULT:=TARGET_mediatek_filogic
@@ -643,8 +670,9 @@ TFA_TARGETS:= \
 	mt7981-spim-nand-ubi-ddr4 \
 	mt7981-ram-ddr4 \
 	mt7981-emmc-ddr4 \
+	mt7981-sdmmc-ddr4 \
 	mt7981-spim-nand-ddr4 \
-	mt7981-cudy-tr3000-v1 \
+	mt7981-cudy-ddr3 \
 	mt7986-ram-ddr3 \
 	mt7986-emmc-ddr3 \
 	mt7986-nor-ddr3 \
@@ -661,8 +689,11 @@ TFA_TARGETS:= \
 	mt7986-spim-nand-ubi-ddr4 \
 	mt7986-spim-nand-4k-ddr4 \
 	mt7987-emmc-comb \
+	mt7987-emmc-ddr4-4bg \
 	mt7987-nor-comb \
 	mt7987-sdmmc-comb \
+	mt7987-sdmmc-ddr4-4bg \
+	mt7987-spim-nand0 \
 	mt7987-spim-nand0-ubi-comb \
 	mt7987-spim-nand2-ubi-comb \
 	mt7987-ram-comb \
@@ -696,6 +727,7 @@ TFA_MAKE_FLAGS += \
 	HAVE_DRAM_OBJ_FILE=yes \
 	$(if $(DDR3_FLYBY),DDR3_FLYBY=1) \
 	$(if $(DDR3_FREQ_1866),DDR3_FREQ_1866=1) \
+	$(if $(DDR4_4BG_MODE),DDR4_4BG_MODE=1) \
 	$(if $(DRAM_USE_COMB),DRAM_USE_COMB=1) \
 	$(if $(RAM_BOOT_UART_DL),RAM_BOOT_UART_DL=1) \
 	$(if $(USE_UBI),UBI=1 $(if $(findstring mt7622,$(PLAT)),OVERRIDE_UBI_START_ADDR=0x80000)) \

package/boot/arm-trusted-firmware-microchipsw/Makefile

@@ -0,0 +1,78 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=arm-trusted-firmware-microchipsw
+PKG_RELEASE:=1
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL=https://github.com/microchip-ung/arm-trusted-firmware.git
+PKG_SOURCE_DATE:=2026-01-07
+PKG_SOURCE_VERSION:=7696c9aaaae7c677f4c373a61a1289cba7f824aa
+PKG_MIRROR_HASH:=331548d7c73896bd5e4438c0ec9c71bbe58d3bf9a29350496ad94c382e922b9c
+
+PKG_BUILD_DEPENDS:=ruby/host
+PKG_MAINTAINER:=Robert Marko <robert.marko@sartura.hr>
+
+include $(INCLUDE_DIR)/kernel.mk
+include $(INCLUDE_DIR)/trusted-firmware-a.mk
+include $(INCLUDE_DIR)/package.mk
+
+define Trusted-Firmware-A/Default
+  BUILD_TARGET:=microchipsw
+  TFA_IMAGE:=fip.bin fwu_fip.bin fwu.html
+endef
+
+define Trusted-Firmware-A/ev23x71a
+  NAME:=Microchip EV23X71A
+  BUILD_SUBTARGET:=lan969x
+  BUILD_DEVICES:=microchip_ev23x71a
+  PLAT:=lan969x_a0
+  DEPENDS:=+u-boot-ev23x71a
+endef
+
+define Trusted-Firmware-A/tactical-1000
+  NAME:=Novarq Tactical 1000
+  BUILD_SUBTARGET:=lan969x
+  BUILD_DEVICES:=novarq_tactical-1000
+  PLAT:=novarq_tactical_1000_v3
+  DEPENDS:=+u-boot-tactical-1000
+endef
+
+TFA_TARGETS:= \
+	ev23x71a \
+	tactical-1000
+
+MBEDTLS_NAME:=mbedtls
+MBEDTLS_RELEASE:=2.28.10
+MBEDTLS_SOURCE:=$(MBEDTLS_NAME)-$(MBEDTLS_RELEASE).tar.zst
+
+define Download/mbedtls
+  FILE:=$(MBEDTLS_SOURCE)
+  PROTO:=git
+  URL:=https://github.com/Mbed-TLS/mbedtls.git
+  SOURCE_VERSION:=2fc8413bfcb51354c8e679141b17b3f1a5942561
+  MIRROR_HASH:=40b94a76572ad1ca89738929ab81d6024f678f22691eb3bd633c076ac18a334a
+  SUBDIR:=$(MBEDTLS_NAME)
+endef
+
+define Build/Prepare
+	# Download mbedtls
+	$(eval $(call Download,mbedtls))
+
+	$(call Build/Prepare/Default,)
+
+	$(TAR) -C $(PKG_BUILD_DIR) -xf $(DL_DIR)/$(MBEDTLS_SOURCE)
+endef
+
+TFA_MAKE_FLAGS += \
+	MBEDTLS_DIR=$(PKG_BUILD_DIR)/$(MBEDTLS_NAME) \
+	BL33=$(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-u-boot.bin \
+	KEY_ALG=ecdsa GENERATE_COT=1 TRUSTED_BOARD_BOOT=1 \
+	all fip fwu_fip
+
+define Package/trusted-firmware-a/install
+	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/build/$(PLAT)/release/fip.bin $(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-fip.bin
+	$(CP) $(patsubst %,$(PKG_BUILD_DIR)/build/$(PLAT)/release/%,$(TFA_IMAGE)) $(1)/
+endef
+
+$(eval $(call BuildPackage/Trusted-Firmware-A))

package/boot/arm-trusted-firmware-microchipsw/patches/0001-microchip-lan969x-add-Novarq-Tactical-1000-v3.patch

@@ -0,0 +1,171 @@
+From 190202583edb9dcab5ca49638169d08a332f0fdf Mon Sep 17 00:00:00 2001
+From: Robert Marko <robert.marko@sartura.hr>
+Date: Sun, 2 Nov 2025 16:57:45 +0100
+Subject: [PATCH] microchip: lan969x: add Novarq Tactical 1000 v3
+
+Add support for Novarq Tactical 1000 v3 board as a separate platform since
+it uses 2GB of RAM and requires a different RAM configuration.
+
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+---
+ .../fdts/lan969x-tactical-1000-v3-ddr.dtsi    | 90 +++++++++++++++++++
+ .../novarq_tactical_1000_v3_tb_fw_config.dts  | 30 +++++++
+ .../novarq_tactical_1000_v3/platform.mk       | 12 +++
+ scripts/fwu/fwu.js                            |  2 +-
+ 4 files changed, 133 insertions(+), 1 deletion(-)
+ create mode 100644 plat/microchip/lan969x/fdts/lan969x-tactical-1000-v3-ddr.dtsi
+ create mode 100644 plat/microchip/lan969x/novarq_tactical_1000_v3/fdts/novarq_tactical_1000_v3_tb_fw_config.dts
+ create mode 100644 plat/microchip/lan969x/novarq_tactical_1000_v3/platform.mk
+
+--- /dev/null
++++ b/plat/microchip/lan969x/fdts/lan969x-tactical-1000-v3-ddr.dtsi
+@@ -0,0 +1,90 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries.
++ *
++ */
++
++&ddr {
++	microchip,mem-name = "lan969x_tactical_1000_2gb 2025-11-02-13:03:23 7391dfb-dirty";
++	microchip,mem-speed = <2400>;
++	microchip,mem-size = <0x80000000>;
++	microchip,mem-bus-width = <16>;
++
++	microchip,main-reg = <
++		0x00001091	/* crcparctl1 */
++		0x00000001	/* dbictl */
++		0x00000040	/* dfimisc */
++		0x0391820f	/* dfitmg0 */
++		0x00040201	/* dfitmg1 */
++		0x40400003	/* dfiupd0 */
++		0x004000ff	/* dfiupd1 */
++		0x003f7f40	/* ecccfg0 */
++		0x00020248	/* init0 */
++		0x00e80000	/* init1 */
++		0x0c340101	/* init3 */
++		0x10180200	/* init4 */
++		0x00110000	/* init5 */
++		0x00000402	/* init6 */
++		0x00000c19	/* init7 */
++		0x81040010	/* mstr */
++		0x00000000	/* pccfg */
++		0x00000000	/* pwrctl */
++		0x00210020	/* rfshctl0 */
++		0x00000000	/* rfshctl3 */
++	>;
++
++	microchip,timing-reg = <
++		0x17131413	/* dramtmg0 */
++		0x0007051b	/* dramtmg1 */
++		0x1a000010	/* dramtmg12 */
++		0x090b0512	/* dramtmg2 */
++		0x0000400c	/* dramtmg3 */
++		0x08040409	/* dramtmg4 */
++		0x07070404	/* dramtmg5 */
++		0x07060c0b	/* dramtmg8 */
++		0x0003040d	/* dramtmg9 */
++		0x07000610	/* odtcfg */
++		0x0049014b	/* rfshtmg */
++	>;
++
++	microchip,mapping-reg = <
++		0x0000001f	/* addrmap0 */
++		0x003f0909	/* addrmap1 */
++		0x00000700	/* addrmap2 */
++		0x00000000	/* addrmap3 */
++		0x00001f1f	/* addrmap4 */
++		0x07070707	/* addrmap5 */
++		0x07070707	/* addrmap6 */
++		0x00000f07	/* addrmap7 */
++		0x00003f01	/* addrmap8 */
++	>;
++
++	microchip,phy-reg = <
++		0x0000040c	/* dcr */
++		0x0064401b	/* dsgcr */
++		0x8000b0cf	/* dtcr0 */
++		0x00010a37	/* dtcr1 */
++		0x00c01884	/* dxccr */
++		0x000010ba	/* pgcr2 */
++		0x00000000	/* schcr1 */
++		0x00079900	/* zq0pr */
++		0x10077900	/* zq1pr */
++		0x00000000	/* zq2pr */
++		0x00058f00	/* zqcr */
++	>;
++
++	microchip,phy_timing-reg = <
++		0x0827100a	/* dtpr0 */
++		0x28250018	/* dtpr1 */
++		0x000702a1	/* dtpr2 */
++		0x03000101	/* dtpr3 */
++		0x02950808	/* dtpr4 */
++		0x00361009	/* dtpr5 */
++		0x4ae25710	/* ptr0 */
++		0x74f4950e	/* ptr1 */
++		0x00083def	/* ptr2 */
++		0x2a192000	/* ptr3 */
++		0x1003a000	/* ptr4 */
++	>;
++
++};
+--- /dev/null
++++ b/plat/microchip/lan969x/novarq_tactical_1000_v3/fdts/novarq_tactical_1000_v3_tb_fw_config.dts
+@@ -0,0 +1,30 @@
++/*
++ * Copyright (c) 2022, Microchip Technology Inc. and its subsidiaries.
++ *
++ * SPDX-License-Identifier: BSD-3-Clause
++ */
++
++/dts-v1/;
++
++#include "lan969x.dtsi"
++#include "lan969x-tactical-1000-v3-ddr.dtsi"
++
++&emmc_clk {
++	clock-frequency = <100000000>;
++};
++
++&sdmmc0 {
++	status = "okay";
++	bus-width = <8>;
++};
++
++&qspi0 {
++	status = "okay";
++	spi-flash@0 {
++		compatible = "jedec,spi-nor";
++		reg = <0>;
++		spi-max-frequency = <100000000>;
++		spi-tx-bus-width = <4>;
++		spi-rx-bus-width = <4>;
++	};
++};
+--- /dev/null
++++ b/plat/microchip/lan969x/novarq_tactical_1000_v3/platform.mk
+@@ -0,0 +1,12 @@
++#
++# Copyright (c) 2021, Microchip Technology Inc. and its subsidiaries.
++#
++# SPDX-License-Identifier: BSD-3-Clause
++#
++
++include plat/microchip/lan969x/common/common.mk
++
++# This is used in lan969x code
++$(eval $(call add_define,LAN969X_ASIC))
++# This is used in common drivers
++$(eval $(call add_define,LAN966X_ASIC))
+--- a/scripts/fwu/fwu.js
++++ b/scripts/fwu/fwu.js
+@@ -91,7 +91,7 @@ const platforms = [
+ 	"ddr_diag":	ddr_diag_regs_lan969x,
+ 	"ddr_regs":	ddr_regs_lan969x,
+ 	"ddr_speed":	lan969x_speeds,
+-	"bl2u_compat":	["lan969x_a0", "lan969x_svb"],
++	"bl2u_compat":	["lan969x_a0", "lan969x_svb", "novarq_tactical_1000_v3"],
+     },
+ ];
+ 

package/boot/arm-trusted-firmware-microchipsw/patches/0002-cert_create-add-LibreSSL-3.9-compatibility.patch

@@ -0,0 +1,95 @@
+From 40166fd8d88f33c621d3cca0b936f31816f3fe2e Mon Sep 17 00:00:00 2001
+From: Robert Marko <robert.marko@sartura.hr>
+Date: Mon, 12 Jan 2026 14:40:23 +0100
+Subject: [PATCH] cert_create: add LibreSSL 3.9+ compatibility
+
+LibreSSL 3.9+ has dropped the whole support for X509V3 extensions.
+
+Generated by Gemini 3 Pro.
+
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+---
+ tools/cert_create/src/ext.c | 26 ++++++++++++++++++++++----
+ 1 file changed, 22 insertions(+), 4 deletions(-)
+
+--- a/tools/cert_create/src/ext.c
++++ b/tools/cert_create/src/ext.c
+@@ -51,15 +51,18 @@ int ext_init(void)
+ {
+ 	cmd_opt_t cmd_opt;
+ 	ext_t *ext;
++#if !defined(LIBRESSL_VERSION_NUMBER) || LIBRESSL_VERSION_NUMBER < 0x40200000L
+ 	X509V3_EXT_METHOD *m;
+-	int nid, ret;
++	int ret, nid;
++#endif
+ 	unsigned int i;
+ 
+ 	extensions = malloc((num_def_extensions * sizeof(def_extensions[0]))
+ #ifdef PDEF_EXTS
+ 			    + (num_pdef_extensions * sizeof(pdef_extensions[0]))
+ #endif
+-			    );
++		);
++
+ 	if (extensions == NULL) {
+ 		ERROR("%s:%d Failed to allocate memory.\n", __func__, __LINE__);
+ 		return 1;
+@@ -69,7 +72,7 @@ int ext_init(void)
+ 	       (num_def_extensions * sizeof(def_extensions[0])));
+ #ifdef PDEF_EXTS
+ 	memcpy(&extensions[num_def_extensions], &pdef_extensions[0],
+-		(num_pdef_extensions * sizeof(pdef_extensions[0])));
++	       (num_pdef_extensions * sizeof(pdef_extensions[0])));
+ 	num_extensions = num_def_extensions + num_pdef_extensions;
+ #else
+ 	num_extensions = num_def_extensions;
+@@ -86,11 +89,15 @@ int ext_init(void)
+ 			cmd_opt.help_msg = ext->help_msg;
+ 			cmd_opt_add(&cmd_opt);
+ 		}
++
+ 		/* Register the extension OID in OpenSSL */
+ 		if (ext->oid == NULL) {
+ 			continue;
+ 		}
++
++#if !defined(LIBRESSL_VERSION_NUMBER) || LIBRESSL_VERSION_NUMBER < 0x40200000L
+ 		nid = OBJ_create(ext->oid, ext->sn, ext->ln);
++
+ 		if (ext->alias) {
+ 			X509V3_EXT_add_alias(nid, ext->alias);
+ 		} else {
+@@ -117,7 +124,16 @@ int ext_init(void)
+ 				return 1;
+ 			}
+ 		}
++#else
++		/*
++		 * LibreSSL 4.2.0+ removed X509V3_EXT_add/alias.
++		 * We still register the OID, but ignore the returned NID
++		 * as we skip method registration.
++		 */
++		OBJ_create(ext->oid, ext->sn, ext->ln);
++#endif
+ 	}
++
+ 	return 0;
+ }
+ 
+@@ -323,12 +339,14 @@ void ext_cleanup(void)
+ 	for (i = 0; i < num_extensions; i++) {
+ 		if (extensions[i].arg != NULL) {
+ 			void *ptr = (void *)extensions[i].arg;
+-
+ 			extensions[i].arg = NULL;
+ 			free(ptr);
+ 		}
+ 	}
+ 	free(extensions);
++
++#if !defined(LIBRESSL_VERSION_NUMBER) || LIBRESSL_VERSION_NUMBER < 0x40200000L
+ 	X509V3_EXT_cleanup();
++#endif
+ }
+ 

package/boot/arm-trusted-firmware-microchipsw/patches/0003-cert_create-pass-pthread-in-LDFLAGS.patch

@@ -0,0 +1,36 @@
+From 11ff8b5e67830d5a09f39e8c1f000b0ddcf8e88f Mon Sep 17 00:00:00 2001
+From: Robert Marko <robert.marko@sartura.hr>
+Date: Mon, 12 Jan 2026 15:16:07 +0100
+Subject: [PATCH] cert_create: pass pthread in LDFLAGS
+
+OpenWrt-s LibreSSL is linked against pthread, so we have to make sure to
+pass -lpthread in LDFLAGS to avoid:
+/usr/bin/ld: /openwrt/staging_dir/host/lib/libcrypto.a(libcrypto_la-crypto_init.o): in function `OPENSSL_init_crypto':
+crypto_init.c:(.text+0x67): undefined reference to `pthread_once'
+/usr/bin/ld: /openwrt/staging_dir/host/lib/libcrypto.a(libcrypto_la-err.o): in function `ERR_load_ERR_strings':
+err.c:(.text+0x812): undefined reference to `pthread_once'
+/usr/bin/ld: /openwrt/staging_dir/host/lib/libcrypto.a(libcrypto_la-conf_sap.o): in function `OpenSSL_config':
+conf_sap.c:(.text+0xc0): undefined reference to `pthread_once'
+/usr/bin/ld: /openwrt/staging_dir/host/lib/libcrypto.a(libcrypto_la-conf_sap.o): in function `OpenSSL_no_config':
+conf_sap.c:(.text+0x107): undefined reference to `pthread_once'
+/usr/bin/ld: /openwrt/staging_dir/host/lib/libcrypto.a(libcrypto_la-err_all.o): in function `ERR_load_crypto_strings':
+err_all.c:(.text+0xa3): undefined reference to `pthread_once'
+collect2: error: ld returned 1 exit status
+make[4]: *** [Makefile:93: cert_create] Error 1
+
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+---
+ tools/cert_create/Makefile | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/tools/cert_create/Makefile
++++ b/tools/cert_create/Makefile
+@@ -79,7 +79,7 @@ INC_DIR += -I ./include -I ${PLAT_INCLUD
+ # located under the main project directory (i.e.: ${OPENSSL_DIR}, not
+ # ${OPENSSL_DIR}/lib/).
+ LIB_DIR := -L ${OPENSSL_DIR}/lib -L ${OPENSSL_DIR}
+-LIB := -lssl -lcrypto
++LIB := -lssl -lcrypto -pthread
+ 
+ HOSTCC ?= gcc
+ 

package/boot/arm-trusted-firmware-microchipsw/patches/0004-microchip-lan969x-do-not-rely-on-Ruby-shebang.patch

@@ -0,0 +1,29 @@
+From f78f934710394822a36bd74043ed93a812c1c690 Mon Sep 17 00:00:00 2001
+From: Robert Marko <robert.marko@sartura.hr>
+Date: Mon, 12 Jan 2026 15:36:35 +0100
+Subject: [PATCH] microchip: lan969x: do not rely on Ruby shebang
+
+Host Ruby build in the staging dir must be used, so we cannot rely on the
+shebang as that will fail.
+
+So, call the script via Ruby executable instead.
+
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+---
+ plat/microchip/lan969x/common/common.mk | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/plat/microchip/lan969x/common/common.mk
++++ b/plat/microchip/lan969x/common/common.mk
+@@ -218,9 +218,9 @@ FWU_HTML := ${BUILD_PLAT}/fwu.html
+ FWU_JS   := ${BUILD_PLAT}/fwu_app.js
+ 
+ ${FWU_JS}: ${BUILD_PLAT}/${FWU_FIP_NAME}
+-	./plat/microchip/scripts/mkjs.rb -p ${PLAT} -o ${FWU_JS} $<
++	$(Q)ruby ./plat/microchip/scripts/mkjs.rb -p ${PLAT} -o ${FWU_JS} $<
+ 
+ ${FWU_HTML}: ${FWU_JS}
+-	./plat/microchip/scripts/html_inline.rb -i ${BUILD_PLAT} ./scripts/fwu/serial.html > ${FWU_HTML}
++	$(Q)ruby ./plat/microchip/scripts/html_inline.rb -i ${BUILD_PLAT} ./scripts/fwu/serial.html > ${FWU_HTML}
+ 
+ all: ${FWU_HTML}

package/boot/arm-trusted-firmware-stm32/Makefile

@@ -7,10 +7,10 @@
 
 include $(TOPDIR)/rules.mk
 
-PKG_VERSION:=2.12
-PKG_RELEASE:=2
+PKG_VERSION:=2.13
+PKG_RELEASE:=1
 
-PKG_HASH:=b4c047493cac1152203e1ba121ae57267e4899b7bf56eb365e22a933342d31c9
+PKG_HASH:=afb5c408392fcec840bd30de9b02a236b0108142024f9853b542b596b0d894e3
 PKG_MAINTAINER:=Thomas Richard <thomas.richard@bootlin.com>
 
 include $(INCLUDE_DIR)/kernel.mk

package/boot/arm-trusted-firmware-stm32/patches/0001-fix-stm32mp1-fdts-re-enable-RTC-clock.patch

@@ -1,51 +0,0 @@
-From 33573ea6842198cfdb5b3fdd320db9e2045855e9 Mon Sep 17 00:00:00 2001
-From: Valentin Caron <valentin.caron@foss.st.com>
-Date: Wed, 11 Dec 2024 11:20:04 +0100
-Subject: [PATCH] fix(stm32mp1-fdts): re-enable RTC clock
-
-On STM32MP15 ST boards, RTC clock configuration by OPTEE is not ready
-yet. Re-enable it temporary to get LSE as clock source of RTC.
-
-Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
-Change-Id: Ib6071229552e456faffb4fdfc8db9808140d54a7
----
- fdts/stm32mp157c-ed1.dts  | 2 ++
- fdts/stm32mp15xx-dkx.dtsi | 2 ++
- 2 files changed, 4 insertions(+)
-
---- a/fdts/stm32mp157c-ed1.dts
-+++ b/fdts/stm32mp157c-ed1.dts
-@@ -194,6 +194,7 @@
- 		CLK_MPU_PLL1P
- 		CLK_AXI_PLL2P
- 		CLK_MCU_PLL3P
-+		CLK_RTC_LSE
- 		CLK_MCO1_DISABLED
- 		CLK_MCO2_DISABLED
- 		CLK_CKPER_HSE
-@@ -242,6 +243,7 @@
- 		DIV(DIV_APB3, 1)
- 		DIV(DIV_APB4, 1)
- 		DIV(DIV_APB5, 2)
-+		DIV(DIV_RTC, 23)
- 		DIV(DIV_MCO1, 0)
- 		DIV(DIV_MCO2, 0)
- 	>;
---- a/fdts/stm32mp15xx-dkx.dtsi
-+++ b/fdts/stm32mp15xx-dkx.dtsi
-@@ -198,6 +198,7 @@
- 		CLK_MPU_PLL1P
- 		CLK_AXI_PLL2P
- 		CLK_MCU_PLL3P
-+		CLK_RTC_LSE
- 		CLK_MCO1_DISABLED
- 		CLK_MCO2_DISABLED
- 		CLK_CKPER_HSE
-@@ -246,6 +247,7 @@
- 		DIV(DIV_APB3, 1)
- 		DIV(DIV_APB4, 1)
- 		DIV(DIV_APB5, 2)
-+		DIV(DIV_RTC, 23)
- 		DIV(DIV_MCO1, 0)
- 		DIV(DIV_MCO2, 0)
- 	>;

package/boot/optee-os-stm32/Makefile

@@ -7,10 +7,10 @@
 
 include $(TOPDIR)/rules.mk
 
-PKG_VERSION:=4.7.0
+PKG_VERSION:=4.8.0
 PKG_RELEASE:=1
 
-PKG_HASH:=976b9c184678516038d4e79766608e81d10bf136f76fd0db2dc48f90f994fbd9
+PKG_HASH:=5222cd553f5edb69ae4ec7cb99b2bfec2c47a47c0be1865b49744701918e8b4d
 PKG_MAINTAINER:=Thomas Richard <thomas.richard@bootlin.com>
 
 OPTEE_USE_INTREE_DTC:=1

package/boot/uboot-airoha/Makefile

@@ -1,8 +1,8 @@
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
-PKG_VERSION:=2025.07
-PKG_HASH:=0f933f6c5a426895bf306e93e6ac53c60870e4b54cda56d95211bec99e63bec7
+PKG_VERSION:=2025.10
+PKG_HASH:=b4f032848e56cc8f213ad59f9132c084dbbb632bc29176d024e58220e0efdf4a
 PKG_BUILD_DEPENDS:=arm-trusted-firmware-tools/host
 
 UBOOT_USE_INTREE_DTC:=1

package/boot/uboot-airoha/patches/200-linux-bitfield.h-import-FIELD_PREP_CONST-macro-from-.patch

@@ -1,55 +0,0 @@
-From 4f1fcf5281ee4e22b1e89a62bd0417878bcbeca5 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Tue, 3 Jun 2025 10:41:18 +0200
-Subject: [PATCH 1/2] linux/bitfield.h: import FIELD_PREP_CONST macro from
- Linux Kernel
-
-Import FIELD_PREP_CONST macro from Linux Kernel to permit usage of
-FIELD_PREP with scenario where a constant value is needed.
-
-Refer to commit e2192de59e45 ("bitfield: add FIELD_PREP_CONST()") in
-Linux kernel for extensive explaination of why this is useful.
-
-This is also to better align with the Linux Kernel for easier porting of
-driver.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
----
- include/linux/bitfield.h | 26 ++++++++++++++++++++++++++
- 1 file changed, 26 insertions(+)
-
---- a/include/linux/bitfield.h
-+++ b/include/linux/bitfield.h
-@@ -90,6 +90,32 @@
- 		((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask);	\
- 	})
- 
-+#define __BF_CHECK_POW2(n)	BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
-+
-+/**
-+ * FIELD_PREP_CONST() - prepare a constant bitfield element
-+ * @_mask: shifted mask defining the field's length and position
-+ * @_val:  value to put in the field
-+ *
-+ * FIELD_PREP_CONST() masks and shifts up the value.  The result should
-+ * be combined with other fields of the bitfield using logical OR.
-+ *
-+ * Unlike FIELD_PREP() this is a constant expression and can therefore
-+ * be used in initializers. Error checking is less comfortable for this
-+ * version, and non-constant masks cannot be used.
-+ */
-+#define FIELD_PREP_CONST(_mask, _val)					\
-+	(								\
-+		/* mask must be non-zero */				\
-+		BUILD_BUG_ON_ZERO((_mask) == 0) +			\
-+		/* check if value fits */				\
-+		BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
-+		/* check if mask is contiguous */			\
-+		__BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) +	\
-+		/* and create the value */				\
-+		(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))	\
-+	)
-+
- /**
-  * FIELD_GET() - extract a bitfield element
-  * @_mask: shifted mask defining the field's length and position

package/boot/uboot-airoha/patches/201-mtd-spinand-winbond-add-Winbond-W25N04KV-flash-suppo.patch

@@ -1,56 +0,0 @@
-From 00e8038b8be74d599f7bc8078731cc2505832f57 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Tue, 3 Jun 2025 10:47:15 +0200
-Subject: [PATCH 2/2] mtd: spinand: winbond: add Winbond W25N04KV flash support
-
-Add Winbond W25N04KV flash support that use a different value to detect
-ECC bitflip.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
----
- drivers/mtd/nand/spi/winbond.c | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/drivers/mtd/nand/spi/winbond.c
-+++ b/drivers/mtd/nand/spi/winbond.c
-@@ -11,6 +11,7 @@
- #include <linux/device.h>
- #include <linux/kernel.h>
- #endif
-+#include <linux/bitfield.h>
- #include <linux/bug.h>
- #include <linux/mtd/spinand.h>
- 
-@@ -18,6 +19,8 @@
- 
- #define WINBOND_CFG_BUF_READ		BIT(3)
- 
-+#define W25N04KV_STATUS_ECC_5_8_BITFLIPS FIELD_PREP_CONST(STATUS_ECC_MASK, 0x3)
-+
- static SPINAND_OP_VARIANTS(read_cache_variants,
- 		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
- 		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
-@@ -121,6 +124,7 @@ static int w25n02kv_ecc_get_status(struc
- 		return -EBADMSG;
- 
- 	case STATUS_ECC_HAS_BITFLIPS:
-+	case W25N04KV_STATUS_ECC_5_8_BITFLIPS:
- 		/*
- 		 * Let's try to retrieve the real maximum number of bitflips
- 		 * in order to avoid forcing the wear-leveling layer to move
-@@ -169,6 +173,15 @@ static const struct spinand_info winbond
- 		     NAND_ECCREQ(8, 512),
- 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
- 					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     0,
-+		     SPINAND_ECCINFO(&w25n02kv_ooblayout, w25n02kv_ecc_get_status)),
-+	SPINAND_INFO("W25N04KV",
-+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xaa, 0x23),
-+		     NAND_MEMORG(1, 2048, 128, 64, 4096, 40, 2, 1, 1),
-+		     NAND_ECCREQ(8, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+					      &write_cache_variants,
- 					      &update_cache_variants),
- 		     0,
- 		     SPINAND_ECCINFO(&w25n02kv_ooblayout, w25n02kv_ecc_get_status)),

package/boot/uboot-airoha/patches/202-mtd-spinand-Use-the-spi-mem-dirmap-API.patch

@@ -17,8 +17,6 @@ Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
  include/linux/mtd/spinand.h |   7 ++
  2 files changed, 95 insertions(+), 97 deletions(-)
 
-diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
-index f5ddfbf4b83..ea00cd7dcf0 100644
 --- a/drivers/mtd/nand/spi/core.c
 +++ b/drivers/mtd/nand/spi/core.c
 @@ -41,21 +41,6 @@ struct spinand_plat {
@@ -275,7 +273,7 @@ index f5ddfbf4b83..ea00cd7dcf0 100644
  static const struct nand_ops spinand_ops = {
  	.erase = spinand_erase,
  	.markbad = spinand_markbad,
-@@ -1116,6 +1099,14 @@ static int spinand_init(struct spinand_device *spinand)
+@@ -1134,6 +1117,14 @@ static int spinand_init(struct spinand_device *spinand)
  		goto err_free_bufs;
  	}
  
@@ -315,6 +313,3 @@ index 6fe6fd520a4..163269313f6 100644
  	int (*select_target)(struct spinand_device *spinand,
  			     unsigned int target);
  	unsigned int cur_target;
--- 
-2.51.0
-

package/boot/uboot-airoha/patches/203-spi-airoha-remove-unnecessary-operation-adjust_op_si.patch

@@ -12,8 +12,6 @@ Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
  drivers/spi/airoha_snfi_spi.c | 16 ----------------
  1 file changed, 16 deletions(-)
 
-diff --git a/drivers/spi/airoha_snfi_spi.c b/drivers/spi/airoha_snfi_spi.c
-index 3ea25b293d1..4eb01038404 100644
 --- a/drivers/spi/airoha_snfi_spi.c
 +++ b/drivers/spi/airoha_snfi_spi.c
 @@ -525,21 +525,6 @@ static int airoha_snand_nfi_config(struct airoha_snand_priv *priv)
@@ -46,6 +44,3 @@ index 3ea25b293d1..4eb01038404 100644
  	.supports_op = airoha_snand_supports_op,
  	.exec_op = airoha_snand_exec_op,
  };
--- 
-2.51.0
-

package/boot/uboot-airoha/patches/204-spi-airoha-add-support-of-dual-quad-wires-spi-modes-.patch

@@ -32,8 +32,6 @@ Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
  drivers/spi/airoha_snfi_spi.c | 143 +++++++++++++++++++++++++++-------
  1 file changed, 117 insertions(+), 26 deletions(-)
 
-diff --git a/drivers/spi/airoha_snfi_spi.c b/drivers/spi/airoha_snfi_spi.c
-index 4eb01038404..7cd409ba44a 100644
 --- a/drivers/spi/airoha_snfi_spi.c
 +++ b/drivers/spi/airoha_snfi_spi.c
 @@ -186,6 +186,14 @@
@@ -257,6 +255,3 @@ index 4eb01038404..7cd409ba44a 100644
  		if (err)
  			return err;
  	}
--- 
-2.51.0
-

package/boot/uboot-airoha/patches/205-spi-airoha-add-dma-support.patch

@@ -19,8 +19,6 @@ Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
  drivers/spi/airoha_snfi_spi.c | 309 ++++++++++++++++++++++++++++++++++
  1 file changed, 309 insertions(+)
 
-diff --git a/drivers/spi/airoha_snfi_spi.c b/drivers/spi/airoha_snfi_spi.c
-index 7cd409ba44a..f72d11f5b19 100644
 --- a/drivers/spi/airoha_snfi_spi.c
 +++ b/drivers/spi/airoha_snfi_spi.c
 @@ -141,12 +141,14 @@
@@ -373,6 +371,3 @@ index 7cd409ba44a..f72d11f5b19 100644
  };
  
  static const struct dm_spi_ops airoha_snfi_spi_ops = {
--- 
-2.51.0
-

package/boot/uboot-airoha/patches/206-spi-airoha-support-of-dualio-quadio-flash-reading-co.patch

@@ -15,8 +15,6 @@ Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
  drivers/spi/airoha_snfi_spi.c | 27 +++++++++++++++++++++------
  1 file changed, 21 insertions(+), 6 deletions(-)
 
-diff --git a/drivers/spi/airoha_snfi_spi.c b/drivers/spi/airoha_snfi_spi.c
-index f72d11f5b19..7cafa900bbc 100644
 --- a/drivers/spi/airoha_snfi_spi.c
 +++ b/drivers/spi/airoha_snfi_spi.c
 @@ -141,6 +141,7 @@
@@ -89,6 +87,3 @@ index f72d11f5b19..7cafa900bbc 100644
  	if (err)
  		goto error_dma_unmap;
  
--- 
-2.51.0
-

package/boot/uboot-airoha/patches/207-spi-airoha-avoid-setting-of-page-oob-sizes-in-REG_SP.patch

@@ -13,8 +13,6 @@ Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
  drivers/spi/airoha_snfi_spi.c | 38 -----------------------------------
  1 file changed, 38 deletions(-)
 
-diff --git a/drivers/spi/airoha_snfi_spi.c b/drivers/spi/airoha_snfi_spi.c
-index 7cafa900bbc..71e4fc13924 100644
 --- a/drivers/spi/airoha_snfi_spi.c
 +++ b/drivers/spi/airoha_snfi_spi.c
 @@ -514,44 +514,6 @@ static int airoha_snand_nfi_config(struct airoha_snand_priv *priv)
@@ -62,6 +60,3 @@ index 7cafa900bbc..71e4fc13924 100644
  	/* sec num */
  	val = FIELD_PREP(SPI_NFI_SEC_NUM, priv->nfi_cfg.sec_num);
  	err = regmap_update_bits(priv->regmap_nfi, REG_SPI_NFI_CON,
--- 
-2.51.0
-

package/boot/uboot-airoha/patches/208-spi-airoha-reduce-the-number-of-modification-of-REG_.patch

@@ -15,8 +15,6 @@ Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
  drivers/spi/airoha_snfi_spi.c | 134 +++++++++++++++++++++++++---------
  1 file changed, 101 insertions(+), 33 deletions(-)
 
-diff --git a/drivers/spi/airoha_snfi_spi.c b/drivers/spi/airoha_snfi_spi.c
-index 71e4fc13924..1fcf5dd89e9 100644
 --- a/drivers/spi/airoha_snfi_spi.c
 +++ b/drivers/spi/airoha_snfi_spi.c
 @@ -641,7 +641,47 @@ static ssize_t airoha_snand_dirmap_read(struct spi_mem_dirmap_desc *desc,
@@ -195,6 +193,3 @@ index 71e4fc13924..1fcf5dd89e9 100644
  	err = regmap_write(priv->regmap_nfi, REG_SPI_NFI_CMD, 0x80);
  	if (err)
  		goto error_dma_unmap;
--- 
-2.51.0
-

package/boot/uboot-airoha/patches/209-spi-airoha-set-custom-sector-size-equal-to-flash-pag.patch

@@ -16,8 +16,6 @@ Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
  drivers/spi/airoha_snfi_spi.c | 35 +++++++++++++++++++----------------
  1 file changed, 19 insertions(+), 16 deletions(-)
 
-diff --git a/drivers/spi/airoha_snfi_spi.c b/drivers/spi/airoha_snfi_spi.c
-index 1fcf5dd89e9..c9feef83f89 100644
 --- a/drivers/spi/airoha_snfi_spi.c
 +++ b/drivers/spi/airoha_snfi_spi.c
 @@ -515,7 +515,7 @@ static int airoha_snand_nfi_config(struct airoha_snand_priv *priv)
@@ -135,6 +133,3 @@ index 1fcf5dd89e9..c9feef83f89 100644
  	if (err)
  		goto error_dma_unmap;
  
--- 
-2.51.0
-

package/boot/uboot-airoha/patches/210-spi-airoha-avoid-usage-of-flash-specific-parameters.patch

@@ -30,8 +30,6 @@ Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
  drivers/spi/airoha_snfi_spi.c | 94 ++---------------------------------
  1 file changed, 4 insertions(+), 90 deletions(-)
 
-diff --git a/drivers/spi/airoha_snfi_spi.c b/drivers/spi/airoha_snfi_spi.c
-index c9feef83f89..37fee0c6655 100644
 --- a/drivers/spi/airoha_snfi_spi.c
 +++ b/drivers/spi/airoha_snfi_spi.c
 @@ -218,13 +218,6 @@ struct airoha_snand_priv {
@@ -170,6 +168,3 @@ index c9feef83f89..37fee0c6655 100644
  };
  
  static const struct udevice_id airoha_snand_ids[] = {
--- 
-2.51.0
-

package/boot/uboot-airoha/patches/300-airoha-add-support-for-Airoha-AN7583-SoC.patch

@@ -19,9 +19,9 @@ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
  board/airoha/an7583/MAINTAINERS      |   5 +
  board/airoha/an7583/Makefile         |   3 +
  board/airoha/an7583/an7583_rfb.c     |  16 ++
- configs/an7583_evb_defconfig         |  83 ++++++
+ configs/an7583_evb_defconfig         |  81 ++++++
  include/configs/an7583.h             |  19 ++
- 11 files changed, 645 insertions(+)
+ 11 files changed, 643 insertions(+)
  create mode 100644 arch/arm/dts/an7583-evb.dts
  create mode 100644 arch/arm/dts/an7583.dtsi
  create mode 100644 arch/arm/mach-airoha/an7583/Makefile
@@ -667,7 +667,7 @@ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
 +CONFIG_CMD_LOG=y
 +CONFIG_ENV_OVERWRITE=y
 +CONFIG_ENV_IS_IN_MMC=y
-+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_ENV_RELOC_GD_ENV_ADDR=y
 +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 +CONFIG_NET_RANDOM_ETHADDR=y
 +CONFIG_REGMAP=y

package/boot/uboot-airoha/patches/303-reset-airoha-Add-support-for-Airoha-AN7583-reset.patch

@@ -96,7 +96,7 @@ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
  static int airoha_reset_update(struct airoha_reset_priv *priv,
  			       unsigned long id, bool assert)
  {
-@@ -135,7 +191,7 @@ static int airoha_reset_xlate(struct res
+@@ -135,7 +191,7 @@ static int airoha_reset_xlate(struct reset_ctl *reset_ctl,
  {
  	struct airoha_reset_priv *priv = dev_get_priv(reset_ctl->dev);
  
@@ -105,7 +105,7 @@ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
  		return -EINVAL;
  
  	reset_ctl->id = priv->idx_map[args->args[0]];
-@@ -150,7 +206,7 @@ static struct reset_ops airoha_reset_ops
+@@ -150,7 +206,7 @@ static struct reset_ops airoha_reset_ops = {
  	.rst_status = airoha_reset_status,
  };
  
@@ -114,15 +114,15 @@ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
  {
  	struct airoha_reset_priv *priv = dev_get_priv(dev);
  	int ret;
-@@ -161,10 +217,44 @@ static int airoha_reset_probe(struct ude
+@@ -161,10 +217,44 @@ static int airoha_reset_probe(struct udevice *dev)
  
  	priv->bank_ofs = en7581_rst_ofs;
  	priv->idx_map = en7581_rst_map;
 +	priv->num_rsts = ARRAY_SIZE(en7581_rst_map);
- 
- 	return 0;
- }
- 
++
++	return 0;
++}
++
 +static int an7583_reset_probe(struct udevice *dev)
 +{
 +	struct airoha_reset_priv *priv = dev_get_priv(dev);
@@ -139,10 +139,10 @@ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
 +	priv->bank_ofs = en7581_rst_ofs;
 +	priv->idx_map = an7583_rst_map;
 +	priv->num_rsts = ARRAY_SIZE(an7583_rst_map);
-+
-+	return 0;
-+}
-+
+ 
+ 	return 0;
+ }
+ 
 +static int airoha_reset_probe(struct udevice *dev)
 +{
 +	if (ofnode_device_is_compatible(dev_ofnode(dev),
@@ -223,3 +223,4 @@ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
 +#define AN7583_XPON_MAC_RST		47
 +
 +#endif /* __DT_BINDINGS_RESET_CONTROLLER_AIROHA_AN7583_H_ */
+

package/boot/uboot-airoha/patches/304-net-airoha-add-support-for-Airoha-AN7583.patch

@@ -1,7 +1,7 @@
-From 289503869e5580658035e82d91b02a43c775f1a1 Mon Sep 17 00:00:00 2001
+From dfdc7309ba22f6a6b6c581acfe95a222108bd760 Mon Sep 17 00:00:00 2001
 From: Christian Marangi <ansuelsmth@gmail.com>
 Date: Mon, 19 May 2025 14:29:53 +0200
-Subject: [PATCH 1/4] net: airoha: add support for Airoha AN7583
+Subject: [PATCH] net: airoha: add support for Airoha AN7583
 
 Add support for Ethernet controller present in Airoha AN7583. This
 follow the same implementation of Airoha AN7581 with the only difference
@@ -61,7 +61,7 @@ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
  
  /* FE */
  #define PSE_BASE			0x0100
-@@ -311,6 +330,26 @@ struct airoha_eth {
+@@ -312,6 +331,26 @@ struct airoha_eth {
  	struct airoha_gdm_port *ports[AIROHA_MAX_NUM_GDM_PORTS];
  };
  
@@ -88,7 +88,7 @@ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
  static u32 airoha_rr(void __iomem *base, u32 offset)
  {
  	return readl(base + offset);
-@@ -351,8 +390,12 @@ static u32 airoha_rmw(void __iomem *base
+@@ -352,8 +391,12 @@ static u32 airoha_rmw(void __iomem *base, u32 offset, u32 mask, u32 val)
  #define airoha_qdma_clear(qdma, offset, val)			\
  	airoha_rmw((qdma)->regs, (offset), (val), 0)
  
@@ -99,9 +99,9 @@ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
 +#define airoha_switch_rmw(eth, offset, mask, val)		\
 +	airoha_rmw((eth)->switch_regs, (offset), (mask), (val))
  
- static void airoha_fe_maccr_init(struct airoha_eth *eth)
- {
-@@ -652,10 +695,12 @@ static int airoha_hw_init(struct udevice
+ static inline dma_addr_t dma_map_unaligned(void *vaddr, size_t len,
+ 					   enum dma_data_direction dir)
+@@ -682,10 +725,12 @@ static int airoha_hw_init(struct udevice *dev,
  
  static int airoha_switch_init(struct udevice *dev, struct airoha_eth *eth)
  {
@@ -115,7 +115,7 @@ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
  	if (!ofnode_valid(switch_node))
  		return -EINVAL;
  
-@@ -687,17 +732,71 @@ static int airoha_switch_init(struct ude
+@@ -717,17 +762,71 @@ static int airoha_switch_init(struct udevice *dev, struct airoha_eth *eth)
  			 FIELD_PREP(SWITCH_PHY_END_ADDR, 0xc) |
  			 FIELD_PREP(SWITCH_PHY_ST_ADDR, 0x8));
  
@@ -189,7 +189,7 @@ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
  	if (!ofnode_valid(scu_node))
  		return -EINVAL;
  
-@@ -721,11 +820,11 @@ static int airoha_eth_probe(struct udevi
+@@ -751,11 +850,11 @@ static int airoha_eth_probe(struct udevice *dev)
  		return -ENOMEM;
  	eth->rsts.count = AIROHA_MAX_NUM_RSTS;
  
@@ -203,7 +203,7 @@ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
  
  	ret = reset_get_by_name(dev, "fe", &eth->rsts.resets[0]);
  	if (ret)
-@@ -739,21 +838,12 @@ static int airoha_eth_probe(struct udevi
+@@ -769,21 +868,12 @@ static int airoha_eth_probe(struct udevice *dev)
  	if (ret)
  		return ret;
  
@@ -231,11 +231,10 @@ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
  
  	ret = airoha_hw_init(dev, eth);
  	if (ret)
-@@ -924,8 +1014,44 @@ static int arht_eth_write_hwaddr(struct
+@@ -971,8 +1061,43 @@ static int arht_eth_write_hwaddr(struct udevice *dev)
  	return 0;
  }
  
-+
 +static ofnode en7581_get_scu_node(struct udevice *dev)
 +{
 +	return ofnode_by_compatible(ofnode_null(), "airoha,en7581-scu");
@@ -274,6 +273,6 @@ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
 +	{ .compatible = "airoha,an7583-eth",
 +	  .data = (ulong)&an7583_data,
 +	},
+ 	{ }
  };
  
- static const struct eth_ops airoha_eth_ops = {

package/boot/uboot-airoha/patches/500-drivers-net-airoha_eth-add-missing-terminator-for-co.patch

@@ -1,32 +0,0 @@
-From a11420dac873fbd5b8a81192571d914f01bee26d Mon Sep 17 00:00:00 2001
-From: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
-Date: Wed, 9 Jul 2025 12:28:07 +0300
-Subject: [PATCH 1/5] drivers/net/airoha_eth: add missing terminator for
- compatible devices list
-
-Compatible device list must have a terminator. If terminator is missed
-the u-boot driver subsystem will access random data placed after the
-list in the memory.
-
-The issue can be observed with the "dm compat" command.
-
-Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
----
- drivers/net/airoha_eth.c | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/drivers/net/airoha_eth.c b/drivers/net/airoha_eth.c
-index b3fd1ab9064..db34ec48c81 100644
---- a/drivers/net/airoha_eth.c
-+++ b/drivers/net/airoha_eth.c
-@@ -1052,6 +1052,7 @@ static const struct udevice_id airoha_eth_ids[] = {
- 	{ .compatible = "airoha,an7583-eth",
- 	  .data = (ulong)&an7583_data,
- 	},
-+	{ }
- };
- 
- static const struct eth_ops airoha_eth_ops = {
--- 
-2.51.0
-

package/boot/uboot-airoha/patches/500-net-airoha-simplify-rx-free-packet-logic-a-bit.patch

@@ -0,0 +1,93 @@
+From e7b7bd119b68fe9106a1c9a45a7eba811fc40ce0 Mon Sep 17 00:00:00 2001
+From: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
+Date: Fri, 3 Oct 2025 20:12:06 +0300
+Subject: [PATCH v2 1/2] net: airoha: simplify rx/free packet logic a bit
+
+The commit 997786bbf473 ("drivers/net/airoha_eth: fix stalling in package
+receiving") can be improved. Instead of returning previous descriptor
+it's possible:
+ * do nothing in even descriptor case
+ * return 2 descriptor to the queue (current and previous) in the odd
+   descriptor case.
+
+This patch:
+ * implements above approach
+ * remove logic not required within new approach
+ * adds note that PKTBUFSRX must be even and larger than 7
+   for reliable driver operations
+
+Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
+---
+ drivers/net/airoha_eth.c | 40 +++++++++++++++++++++-------------------
+ 1 file changed, 21 insertions(+), 19 deletions(-)
+
+--- a/drivers/net/airoha_eth.c
++++ b/drivers/net/airoha_eth.c
+@@ -492,14 +492,10 @@ static int airoha_qdma_init_rx_queue(struct airoha_queue *q,
+ 			RX_RING_SIZE_MASK,
+ 			FIELD_PREP(RX_RING_SIZE_MASK, ndesc));
+ 
+-	/*
+-	 * See arht_eth_free_pkt() for the reasons used to fill
+-	 * REG_RX_CPU_IDX(qid) register.
+-	 */
+ 	airoha_qdma_rmw(qdma, REG_RX_RING_SIZE(qid), RX_RING_THR_MASK,
+ 			FIELD_PREP(RX_RING_THR_MASK, 0));
+ 	airoha_qdma_rmw(qdma, REG_RX_CPU_IDX(qid), RX_RING_CPU_IDX_MASK,
+-			FIELD_PREP(RX_RING_CPU_IDX_MASK, q->ndesc - 3));
++			FIELD_PREP(RX_RING_CPU_IDX_MASK, q->ndesc - 1));
+ 	airoha_qdma_rmw(qdma, REG_RX_DMA_IDX(qid), RX_RING_DMA_IDX_MASK,
+ 			FIELD_PREP(RX_RING_DMA_IDX_MASK, q->head));
+ 
+@@ -1010,7 +1006,6 @@ static int arht_eth_free_pkt(struct udevice *dev, uchar *packet, int length)
+ 	struct airoha_qdma *qdma = &eth->qdma[0];
+ 	struct airoha_queue *q;
+ 	int qid;
+-	u16 prev, pprev;
+ 
+ 	if (!packet)
+ 		return 0;
+@@ -1020,22 +1015,29 @@ static int arht_eth_free_pkt(struct udevice *dev, uchar *packet, int length)
+ 
+ 	/*
+ 	 * Due to cpu cache issue the airoha_qdma_reset_rx_desc() function
+-	 * will always touch 2 descriptors:
+-	 *   - if current descriptor is even, then the previous and the one
+-	 *     before previous descriptors will be touched (previous cacheline)
+-	 *   - if current descriptor is odd, then only current and previous
+-	 *     descriptors will be touched (current cacheline)
++	 * will always touch 2 descriptors placed on the same cacheline:
++	 *   - if current descriptor is even, then current and next
++	 *     descriptors will be touched
++	 *   - if current descriptor is odd, then current and previous
++	 *     descriptors will be touched
+ 	 *
+-	 * Thus, to prevent possible destroying of rx queue, only (q->ndesc - 2)
+-	 * descriptors might be used for packet receiving.
++	 * Thus, to prevent possible destroying of rx queue, we should:
++	 *   - do nothing in the even descriptor case,
++	 *   - utilize 2 descriptors (current and previous one) in the
++	 *     odd descriptor case.
++	 *
++	 * WARNING: Observations shows that PKTBUFSRX must be even and
++	 *          larger than 7 for reliable driver operations.
+ 	 */
+-	prev  = (q->head + q->ndesc - 1) % q->ndesc;
+-	pprev = (q->head + q->ndesc - 2) % q->ndesc;
+-	q->head = (q->head + 1) % q->ndesc;
++	if (q->head & 0x01) {
++		airoha_qdma_reset_rx_desc(q, q->head - 1);
++		airoha_qdma_reset_rx_desc(q, q->head);
+ 
+-	airoha_qdma_reset_rx_desc(q, prev);
+-	airoha_qdma_rmw(qdma, REG_RX_CPU_IDX(qid), RX_RING_CPU_IDX_MASK,
+-			FIELD_PREP(RX_RING_CPU_IDX_MASK, pprev));
++		airoha_qdma_rmw(qdma, REG_RX_CPU_IDX(qid), RX_RING_CPU_IDX_MASK,
++				FIELD_PREP(RX_RING_CPU_IDX_MASK, q->head));
++	}
++
++	q->head = (q->head + 1) % q->ndesc;
+ 
+ 	return 0;
+ }
+

package/boot/uboot-airoha/patches/501-drivers-net-airoha_eth-fix-packet-transmission-error.patch

@@ -1,107 +0,0 @@
-From 8fce1cfe775e1f3b5d7cecb8bdcc8271bf9f799c Mon Sep 17 00:00:00 2001
-From: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
-Date: Wed, 9 Jul 2025 12:28:08 +0300
-Subject: [PATCH 2/5] drivers/net/airoha_eth: fix packet transmission errors
-
-The dma_map_single() function calls one of the functions
-  * invalidate_dcache_range(),
-  * flush_dcache_range().
-Both of them expect that 'vaddr' is aligned to the ARCH_DMA_MINALIGN
-boundary. Unfortunately, RX/TX descriptors are 32-byte long. Thus they
-might not be aligned to the ARCH_DMA_MINALIGN boundary. Data flushing
-(or invalidating) might do nothing in this case.
-
-The same applies to dma_unmap_single() function.
-
-In the TX path case the issue might prevent package transmission (filled
-TX descriptor was not flushed).
-
-To fix an issue a special wrappers for
-  * dma_map_single(),
-  * dma_unmap_single()
-functions were created. The patch fix flushing/invalidatiog for the
-RX path as well.
-
-The bug appears on 32-bit airoha platform, but should be present on
-64-bit as well.
-
-The code was tested both on 32-bit and 64-bit airoha boards.
-
-Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
----
- drivers/net/airoha_eth.c | 33 +++++++++++++++++++++++++++------
- 1 file changed, 27 insertions(+), 6 deletions(-)
-
-diff --git a/drivers/net/airoha_eth.c b/drivers/net/airoha_eth.c
-index db34ec48c81..aae6922f3c7 100644
---- a/drivers/net/airoha_eth.c
-+++ b/drivers/net/airoha_eth.c
-@@ -397,6 +397,27 @@ static u32 airoha_rmw(void __iomem *base, u32 offset, u32 mask, u32 val)
- #define airoha_switch_rmw(eth, offset, mask, val)		\
- 	airoha_rmw((eth)->switch_regs, (offset), (mask), (val))
- 
-+static inline dma_addr_t dma_map_unaligned(void *vaddr, size_t len,
-+					   enum dma_data_direction dir)
-+{
-+	uintptr_t start, end;
-+
-+	start = ALIGN_DOWN((uintptr_t)vaddr, ARCH_DMA_MINALIGN);
-+	end = ALIGN((uintptr_t)(vaddr + len), ARCH_DMA_MINALIGN);
-+
-+	return dma_map_single((void *)start, end - start, dir);
-+}
-+
-+static inline void dma_unmap_unaligned(dma_addr_t addr, size_t len,
-+				       enum dma_data_direction dir)
-+{
-+	uintptr_t start, end;
-+
-+	start = ALIGN_DOWN((uintptr_t)addr, ARCH_DMA_MINALIGN);
-+	end = ALIGN((uintptr_t)(addr + len), ARCH_DMA_MINALIGN);
-+	dma_unmap_single(start, end - start, dir);
-+}
-+
- static void airoha_fe_maccr_init(struct airoha_eth *eth)
- {
- 	int p;
-@@ -434,7 +455,7 @@ static void airoha_qdma_reset_rx_desc(struct airoha_queue *q, int index,
- 	val = FIELD_PREP(QDMA_DESC_LEN_MASK, PKTSIZE_ALIGN);
- 	WRITE_ONCE(desc->ctrl, cpu_to_le32(val));
- 
--	dma_map_single(desc, sizeof(*desc), DMA_TO_DEVICE);
-+	dma_map_unaligned(desc, sizeof(*desc), DMA_TO_DEVICE);
- }
- 
- static void airoha_qdma_init_rx_desc(struct airoha_queue *q)
-@@ -916,14 +937,14 @@ static int airoha_eth_send(struct udevice *dev, void *packet, int length)
- 	WRITE_ONCE(desc->msg1, cpu_to_le32(msg1));
- 	WRITE_ONCE(desc->msg2, cpu_to_le32(0xffff));
- 
--	dma_map_single(desc, sizeof(*desc), DMA_TO_DEVICE);
-+	dma_map_unaligned(desc, sizeof(*desc), DMA_TO_DEVICE);
- 
- 	airoha_qdma_rmw(qdma, REG_TX_CPU_IDX(qid), TX_RING_CPU_IDX_MASK,
- 			FIELD_PREP(TX_RING_CPU_IDX_MASK, index));
- 
- 	for (i = 0; i < 100; i++) {
--		dma_unmap_single(virt_to_phys(desc), sizeof(*desc),
--				 DMA_FROM_DEVICE);
-+		dma_unmap_unaligned(virt_to_phys(desc), sizeof(*desc),
-+				    DMA_FROM_DEVICE);
- 		if (desc->ctrl & QDMA_DESC_DONE_MASK)
- 			break;
- 
-@@ -954,8 +975,8 @@ static int airoha_eth_recv(struct udevice *dev, int flags, uchar **packetp)
- 	q = &qdma->q_rx[qid];
- 	desc = &q->desc[q->head];
- 
--	dma_unmap_single(virt_to_phys(desc), sizeof(*desc),
--			 DMA_FROM_DEVICE);
-+	dma_unmap_unaligned(virt_to_phys(desc), sizeof(*desc),
-+			    DMA_FROM_DEVICE);
- 
- 	if (!(desc->ctrl & QDMA_DESC_DONE_MASK))
- 		return -EAGAIN;
--- 
-2.51.0
-

package/boot/uboot-airoha/patches/502-drivers-net-airoha_eth-fix-stalling-in-package-recei.patch

@@ -1,135 +0,0 @@
-From 352c071bc18855238565cc6417a4c15a4e24bad8 Mon Sep 17 00:00:00 2001
-From: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
-Date: Wed, 9 Jul 2025 12:28:09 +0300
-Subject: [PATCH 3/5] drivers/net/airoha_eth: fix stalling in package
- receiving
-
-ARCH_DMA_MINALIGN is 64 for ARMv7a/ARMv8a architectures, but RX/TX
-descriptors are 32 bytes long. So they may not be aligned on an
-ARCH_DMA_MINALIGN boundary. In case of RX path, this may cause the
-following problem
-
-1) Assume that a packet has arrived and the EVEN rx descriptor has been
-   updated with the incoming data. The driver will invalidate and check
-   the corresponding rx descriptor.
-
-2) Now suppose the next descriptor (ODD) has not yet completed.
-
-   Please note that all even descriptors starts on 64-byte boundary,
-   and the odd ones are NOT aligned on 64-byte boundary.
-
-   Inspecting even descriptor, we will read the entire CPU cache line
-   (64 bytes). So we read and sore in CPU cache also the next (odd)
-   descriptor.
-
-3) Now suppose the next packet (for the odd rx descriptor) arrived
-   while the first packet was being processed. So we have new data
-   in memory but old data in cache.
-
-4) After packet processing (in arht_eth_free_pkt() function) we will
-   cleanup the descriptor and put it back to rx queue.
-
-   This will call flush_dcache_range() function for the even descriptor,
-   so the odd one will be flushed as well (it is in the same cache line).
-   So the old data will be written to the next rx descriptor.
-
-5) We get a freeze. The next descriptor is empty (so the driver is
-   waiting for packets), but the hardware will continue to receive
-   packets on other available descriptors. This will continue until
-   the last available rx descriptor is full. Then the hardware will
-   also freeze.
-
-The problem will be solved if:
-  * do nothing in even descriptor case,
-  * return 2 descriptor to the queue (current and previous) in the odd
-    descriptor case.
-
-If the current descriptor is even nothing will be done, so no issue
-will arrise.
-
-If the current descriptor is odd, then the previous descriptor is on
-the same cache line. Both (current and previous) descriptors are not
-currently in use, so issue will not arrise as well.
-
-WARNING: The following restrictions on PKTBUFSRX must be held:
-  * PKTBUFSRX is even,
-  * PKTBUFSRX >= 4. Observations shows that PKTBUFSRX must be at least 8.
-
-The bug appears on 32-bit airoha platform, but should be present on
-64-bit as well.
-
-The code was tested both on 32-bit and 64-bit airoha boards.
-
-Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
----
- drivers/net/airoha_eth.c | 33 ++++++++++++++++++++++++++-------
- 1 file changed, 26 insertions(+), 7 deletions(-)
-
-diff --git a/drivers/net/airoha_eth.c b/drivers/net/airoha_eth.c
-index aae6922f3c7..44d4773bc5d 100644
---- a/drivers/net/airoha_eth.c
-+++ b/drivers/net/airoha_eth.c
-@@ -435,13 +435,14 @@ static int airoha_fe_init(struct airoha_eth *eth)
- 	return 0;
- }
- 
--static void airoha_qdma_reset_rx_desc(struct airoha_queue *q, int index,
--				      uchar *rx_packet)
-+static void airoha_qdma_reset_rx_desc(struct airoha_queue *q, int index)
- {
- 	struct airoha_qdma_desc *desc;
-+	uchar *rx_packet;
- 	u32 val;
- 
- 	desc = &q->desc[index];
-+	rx_packet = net_rx_packets[index];
- 	index = (index + 1) % q->ndesc;
- 
- 	dma_map_single(rx_packet, PKTSIZE_ALIGN, DMA_TO_DEVICE);
-@@ -463,7 +464,7 @@ static void airoha_qdma_init_rx_desc(struct airoha_queue *q)
- 	int i;
- 
- 	for (i = 0; i < q->ndesc; i++)
--		airoha_qdma_reset_rx_desc(q, i, net_rx_packets[i]);
-+		airoha_qdma_reset_rx_desc(q, i);
- }
- 
- static int airoha_qdma_init_rx_queue(struct airoha_queue *q,
-@@ -1003,12 +1004,30 @@ static int arht_eth_free_pkt(struct udevice *dev, uchar *packet, int length)
- 	qid = 0;
- 	q = &qdma->q_rx[qid];
- 
--	dma_map_single(packet, length, DMA_TO_DEVICE);
-+	/*
-+	 * Due to cpu cache issue the airoha_qdma_reset_rx_desc() function
-+	 * will always touch 2 descriptors placed on the same cacheline:
-+	 *   - if current descriptor is even, then current and next
-+	 *     descriptors will be touched
-+	 *   - if current descriptor is odd, then current and previous
-+	 *     descriptors will be touched
-+	 *
-+	 * Thus, to prevent possible destroying of rx queue, we should:
-+	 *   - do nothing in the even descriptor case,
-+	 *   - utilize 2 descriptors (current and previous one) in the
-+	 *     odd descriptor case.
-+	 *
-+	 * WARNING: Observations shows that PKTBUFSRX must be even and
-+	 *          larger than 7 for reliable driver operations.
-+	 */
-+	if (q->head & 0x01) {
-+		airoha_qdma_reset_rx_desc(q, q->head - 1);
-+		airoha_qdma_reset_rx_desc(q, q->head);
- 
--	airoha_qdma_reset_rx_desc(q, q->head, packet);
-+		airoha_qdma_rmw(qdma, REG_RX_CPU_IDX(qid), RX_RING_CPU_IDX_MASK,
-+				FIELD_PREP(RX_RING_CPU_IDX_MASK, q->head));
-+	}
- 
--	airoha_qdma_rmw(qdma, REG_RX_CPU_IDX(qid), RX_RING_CPU_IDX_MASK,
--			FIELD_PREP(RX_RING_CPU_IDX_MASK, q->head));
- 	q->head = (q->head + 1) % q->ndesc;
- 
- 	return 0;
--- 
-2.51.0
-

package/boot/uboot-airoha/patches/503-drivers-net-airoha_eth-enable-hw-padding-of-short-tx.patch

@@ -1,64 +0,0 @@
-From dc0ae3455f4344403e293c9b385653ad3fddb0b1 Mon Sep 17 00:00:00 2001
-From: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
-Date: Wed, 9 Jul 2025 12:28:10 +0300
-Subject: [PATCH 4/5] drivers/net/airoha_eth: enable hw padding of short tx
- packets
-
-Transmission of short packets does not work good for XFI (GDM2) and
-HSGMII (GDM3) interfaces. The issue can be solved with:
-
- - padding of short packets to 60 bytes
- - setting of PAD_EN bit in the corresponding REG_GDM_FWD_CFG(n)
-   register.
-
-The issue should present for the lan switch (GDM1) as well, but it does
-does not appear due to unknown reason.
-
-This patch set PAD_EN bit for the used GDM.
-
-Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
----
- drivers/net/airoha_eth.c | 13 +++++++++++--
- 1 file changed, 11 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/net/airoha_eth.c b/drivers/net/airoha_eth.c
-index 53c722379c9..b2f73c7dbb7 100644
---- a/drivers/net/airoha_eth.c
-+++ b/drivers/net/airoha_eth.c
-@@ -116,6 +116,7 @@
- 	 (_n) == 2 ? GDM2_BASE : GDM1_BASE)
- 
- #define REG_GDM_FWD_CFG(_n)		GDM_BASE(_n)
-+#define GDM_PAD_EN			BIT(28)
- #define GDM_DROP_CRC_ERR		BIT(23)
- #define GDM_IP4_CKSUM			BIT(22)
- #define GDM_TCP_CKSUM			BIT(21)
-@@ -423,8 +424,11 @@ static void airoha_fe_maccr_init(struct airoha_eth *eth)
- 	int p;
- 
- 	for (p = 1; p <= ARRAY_SIZE(eth->ports); p++) {
--		/* Disable any kind of CRC drop or offload */
--		airoha_fe_wr(eth, REG_GDM_FWD_CFG(p), 0);
-+		/*
-+		 * Disable any kind of CRC drop or offload.
-+		 * Enable padding of short TX packets to 60 bytes.
-+		 */
-+		airoha_fe_wr(eth, REG_GDM_FWD_CFG(p), GDM_PAD_EN);
- 	}
- }
- 
-@@ -920,6 +924,11 @@ static int airoha_eth_send(struct udevice *dev, void *packet, int length)
- 	u32 val;
- 	int i;
- 
-+	/*
-+	 * There is no need to pad short TX packets to 60 bytes since the
-+	 * GDM_PAD_EN bit set in the corresponding REG_GDM_FWD_CFG(n) register.
-+	 */
-+
- 	dma_addr = dma_map_single(packet, length, DMA_TO_DEVICE);
- 
- 	qid = 0;
--- 
-2.51.0
-

package/boot/uboot-airoha/patches/504-net-airoha-increase-the-number-of-rx-network-buffers.patch

@@ -13,30 +13,23 @@ Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
  configs/an7583_evb_defconfig | 1 +
  2 files changed, 2 insertions(+)
 
-diff --git a/configs/an7581_evb_defconfig b/configs/an7581_evb_defconfig
-index c74247e13db..aa1a30aad6a 100644
 --- a/configs/an7581_evb_defconfig
 +++ b/configs/an7581_evb_defconfig
-@@ -44,6 +44,7 @@ CONFIG_ENV_IS_IN_MMC=y
- CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+@@ -43,6 +43,7 @@ CONFIG_ENV_IS_IN_MMC=y
+ CONFIG_ENV_RELOC_GD_ENV_ADDR=y
  CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
  CONFIG_NET_RANDOM_ETHADDR=y
 +CONFIG_SYS_RX_ETH_BUFFER=8
  CONFIG_REGMAP=y
  CONFIG_SYSCON=y
  CONFIG_CLK=y
-diff --git a/configs/an7583_evb_defconfig b/configs/an7583_evb_defconfig
-index 057104b93af..c67444ae8bf 100644
 --- a/configs/an7583_evb_defconfig
 +++ b/configs/an7583_evb_defconfig
 @@ -44,6 +44,7 @@ CONFIG_ENV_IS_IN_MMC=y
- CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+ CONFIG_ENV_RELOC_GD_ENV_ADDR=y
  CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
  CONFIG_NET_RANDOM_ETHADDR=y
 +CONFIG_SYS_RX_ETH_BUFFER=8
  CONFIG_REGMAP=y
  CONFIG_SYSCON=y
  CONFIG_CLK=y
--- 
-2.51.0
-

package/boot/uboot-airoha/patches/900-airoha-enable-UBI-support-and-define-default-partiti.patch

@@ -38,14 +38,10 @@ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
  
 --- a/arch/arm/dts/an7583-evb.dts
 +++ b/arch/arm/dts/an7583-evb.dts
-@@ -46,6 +46,28 @@
+@@ -46,6 +46,24 @@
  	};
  };
  
-+&snfi {
-+	status = "okay";
-+};
-+
 +&spi_nand {
 +	partitions {
 +		compatible = "fixed-partitions";
@@ -69,7 +65,7 @@ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
  	pinctrl-0 = <&pcie0_rst_pins>;
 --- a/configs/an7581_evb_defconfig
 +++ b/configs/an7581_evb_defconfig
-@@ -77,3 +77,19 @@ CONFIG_SPI=y
+@@ -78,3 +78,19 @@ CONFIG_SPI=y
  CONFIG_DM_SPI=y
  CONFIG_AIROHA_SNFI_SPI=y
  CONFIG_SHA512=y
@@ -91,7 +87,7 @@ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
 +# CONFIG_UBIFS_SILENCE_DEBUG_DUMP is not set
 --- a/configs/an7583_evb_defconfig
 +++ b/configs/an7583_evb_defconfig
-@@ -79,3 +79,19 @@ CONFIG_SHA512=y
+@@ -80,3 +80,19 @@ CONFIG_SHA512=y
  CONFIG_AIROHA_ETH=y
  CONFIG_MMC_MTK=y
  CONFIG_AIROHA_SNFI_SPI=y

package/boot/uboot-airoha/patches/901-airoha-add-default-configuration.patch

@@ -7,28 +7,28 @@ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
 ---
  configs/an7581_evb_defconfig | 2 ++
  configs/an7583_evb_defconfig | 2 ++
- defenvs/an7581_rfb_env       | 3 +++
- defenvs/an7583_rfb_env       | 3 +++
- 4 files changed, 10 insertions(+)
+ defenvs/an7581_rfb_env       | 4 ++++
+ defenvs/an7583_rfb_env       | 4 ++++
+ 4 files changed, 12 insertions(+)
  create mode 100644 defenvs/an7581_rfb_env
  create mode 100644 defenvs/an7583_rfb_env
 
 --- a/configs/an7581_evb_defconfig
 +++ b/configs/an7581_evb_defconfig
-@@ -93,3 +93,5 @@ CONFIG_MTD_UBI_BEB_LIMIT=20
+@@ -94,3 +94,5 @@ CONFIG_MTD_UBI_BEB_LIMIT=20
  CONFIG_UBI_BLOCK=y
  # CONFIG_UBIFS_SILENCE_MSG is not set
  # CONFIG_UBIFS_SILENCE_DEBUG_DUMP is not set
-+CONFIG_USE_DEFAULT_ENV_FILE=y
-+CONFIG_DEFAULT_ENV_FILE="defenvs/an7581_rfb_env"
++CONFIG_ENV_USE_DEFAULT_ENV_TEXT_FILE=y
++CONFIG_ENV_DEFAULT_ENV_TEXT_FILE="defenvs/an7581_rfb_env"
 --- a/configs/an7583_evb_defconfig
 +++ b/configs/an7583_evb_defconfig
-@@ -95,3 +95,5 @@ CONFIG_MTD_UBI_BEB_LIMIT=20
+@@ -96,3 +96,5 @@ CONFIG_MTD_UBI_BEB_LIMIT=20
  CONFIG_UBI_BLOCK=y
  # CONFIG_UBIFS_SILENCE_MSG is not set
  # CONFIG_UBIFS_SILENCE_DEBUG_DUMP is not set
-+CONFIG_USE_DEFAULT_ENV_FILE=y
-+CONFIG_DEFAULT_ENV_FILE="defenvs/an7583_rfb_env"
++CONFIG_ENV_USE_DEFAULT_ENV_TEXT_FILE=y
++CONFIG_ENV_DEFAULT_ENV_TEXT_FILE="defenvs/an7583_rfb_env"
 --- /dev/null
 +++ b/defenvs/an7581_rfb_env
 @@ -0,0 +1,4 @@

package/boot/uboot-airoha/patches/902-arm-airoha-disable-environment-inside-mtd-partition.patch

@@ -0,0 +1,40 @@
+From 10bd131a6a365965ce868419933fd7936e91c635 Mon Sep 17 00:00:00 2001
+From: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
+Date: Mon, 13 Oct 2025 20:48:00 +0300
+Subject: [PATCH 2/3] arm: airoha: disable environment inside mtd partition
+
+When booting on en7581_evb board equipped with spinand flash, a u-boot
+panic occurs. The panic is caused by the absence any available mtd
+partition.
+
+Disable CONFIG_ENV_IS_IN_MTD to avoid an issue. The environment will
+be stored in the EMMC or in UBI, so actually CONFIG_ENV_IS_IN_MTD is
+not needed.
+
+Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
+---
+ configs/an7581_evb_defconfig | 1 +
+ configs/an7583_evb_defconfig | 1 +
+ 2 files changed, 2 insertions(+)
+
+--- a/configs/an7581_evb_defconfig
++++ b/configs/an7581_evb_defconfig
+@@ -40,6 +40,7 @@ CONFIG_CMD_LOG=y
+ CONFIG_OF_UPSTREAM=y
+ CONFIG_ENV_OVERWRITE=y
+ CONFIG_ENV_IS_IN_MMC=y
++# CONFIG_ENV_IS_IN_MTD is not set
+ CONFIG_ENV_RELOC_GD_ENV_ADDR=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+ CONFIG_NET_RANDOM_ETHADDR=y
+--- a/configs/an7583_evb_defconfig
++++ b/configs/an7583_evb_defconfig
+@@ -41,6 +41,7 @@ CONFIG_CMD_MTDPARTS=y
+ CONFIG_CMD_LOG=y
+ CONFIG_ENV_OVERWRITE=y
+ CONFIG_ENV_IS_IN_MMC=y
++# CONFIG_ENV_IS_IN_MTD is not set
+ CONFIG_ENV_RELOC_GD_ENV_ADDR=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+ CONFIG_NET_RANDOM_ETHADDR=y
+

package/boot/uboot-airoha/patches/903-arm-airoha-dts-enable-spi-support-for-en7581_evb-boa.patch

@@ -0,0 +1,23 @@
+From 6c4a07ecf211b56eb28fe2dbd8e324b2fdecb84a Mon Sep 17 00:00:00 2001
+From: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
+Date: Mon, 13 Oct 2025 20:44:24 +0300
+Subject: [PATCH 1/3] arm: airoha: dts: enable spi support for en7581_evb board
+
+spinand flashes are inaccessible without this patch
+
+Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
+---
+ arch/arm/dts/en7581-evb-u-boot.dtsi | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/arch/arm/dts/en7581-evb-u-boot.dtsi
++++ b/arch/arm/dts/en7581-evb-u-boot.dtsi
+@@ -9,3 +9,7 @@
+ };
+ 
+ #include "an7581-u-boot.dtsi"
++
++&snfi {
++	status = "okay";
++};
+

package/boot/uboot-airoha/patches/904-arm-airoha-enable-position-independent-code.patch

@@ -0,0 +1,32 @@
+From bee36b6f42792556e123f331ece80f8d5a40e8cd Mon Sep 17 00:00:00 2001
+From: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
+Date: Mon, 13 Oct 2025 20:56:31 +0300
+Subject: [PATCH 3/3] arm: airoha: enable position independent code
+
+This slightly increase the code, but makes debugging a bit easy
+
+Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
+---
+ configs/an7581_evb_defconfig | 1 +
+ configs/an7583_evb_defconfig | 1 +
+ 2 files changed, 2 insertions(+)
+
+--- a/configs/an7581_evb_defconfig
++++ b/configs/an7581_evb_defconfig
+@@ -1,5 +1,6 @@
+ CONFIG_ARM=y
+ CONFIG_ARCH_AIROHA=y
++CONFIG_POSITION_INDEPENDENT=y
+ CONFIG_TEXT_BASE=0x81E00000
+ CONFIG_SYS_MALLOC_F_LEN=0x4000
+ CONFIG_NR_DRAM_BANKS=1
+--- a/configs/an7583_evb_defconfig
++++ b/configs/an7583_evb_defconfig
+@@ -1,5 +1,6 @@
+ CONFIG_ARM=y
+ CONFIG_ARCH_AIROHA=y
++CONFIG_POSITION_INDEPENDENT=y
+ CONFIG_TARGET_AN7583=y
+ CONFIG_TEXT_BASE=0x81E00000
+ CONFIG_SYS_MALLOC_F_LEN=0x4000
+

package/boot/uboot-ath79/Makefile

@@ -19,12 +19,19 @@ define U-Boot/Default
 endef
 
 define U-Boot/ar9344_nec_aterm
-  NAME:=NEC Aterm series (AR9344)
+  NAME:=NEC Aterm series (AR9344, GbE)
   BUILD_SUBTARGET:= tiny
   BUILD_DEVICES:=nec_wg600hp nec_wr8750n nec_wr9500n
   UBOOT_CONFIG:=nec_ar9344_aterm
 endef
 
+define U-Boot/ar9344_nec_aterm_fe
+  NAME:=NEC Aterm series (AR9344, FE)
+  BUILD_SUBTARGET:= tiny
+  BUILD_DEVICES:=nec_wf1200hp nec_wf1200hp2
+  UBOOT_CONFIG:=nec_ar9344_aterm_fe
+endef
+
 define U-Boot/qca9558_nec_aterm
   NAME:=NEC Aterm series (QCA9558)
   BUILD_SUBTARGET:= generic
@@ -32,7 +39,7 @@ define U-Boot/qca9558_nec_aterm
   UBOOT_CONFIG:=nec_qca9558_aterm
 endef
 
-UBOOT_TARGETS := ar9344_nec_aterm qca9558_nec_aterm
+UBOOT_TARGETS := ar9344_nec_aterm ar9344_nec_aterm_fe qca9558_nec_aterm
 
 # don't stage files to bindir, let target/linux/ath79/image/*.mk do that
 define Package/u-boot/install

package/boot/uboot-ath79/patches/400-ath79-add-support-for-NEC-AR9344-Aterm-series.patch

@@ -5,19 +5,21 @@ Subject: [PATCH] ath79: add support for NEC AR9344 Aterm series
 
 ---
  arch/mips/dts/Makefile                |  1 +
- arch/mips/dts/nec,ar9344-aterm.dts    | 35 +++++++++++++++
- arch/mips/mach-ath79/Kconfig          |  5 +++
- board/nec/ar9344_aterm/Kconfig        | 30 +++++++++++++
+ arch/mips/dts/nec,ar9344-aterm.dts    | 35 ++++++++++++++
+ arch/mips/mach-ath79/Kconfig          |  5 ++
+ board/nec/ar9344_aterm/Kconfig        | 33 +++++++++++++
  board/nec/ar9344_aterm/Makefile       |  3 ++
- board/nec/ar9344_aterm/ar9344_aterm.c | 59 ++++++++++++++++++++++++++
- configs/nec_ar9344_aterm_defconfig    | 61 +++++++++++++++++++++++++++
- include/configs/nec_ar9344_aterm.h    | 28 ++++++++++++
- 8 files changed, 222 insertions(+)
+ board/nec/ar9344_aterm/ar9344_aterm.c | 70 +++++++++++++++++++++++++++
+ configs/nec_ar9344_aterm_defconfig    | 61 +++++++++++++++++++++++
+ configs/nec_ar9344_aterm_fe_defconfig | 62 ++++++++++++++++++++++++
+ include/configs/nec_ar9344_aterm.h    | 28 +++++++++++
+ 9 files changed, 298 insertions(+)
  create mode 100644 arch/mips/dts/nec,ar9344-aterm.dts
  create mode 100644 board/nec/ar9344_aterm/Kconfig
  create mode 100644 board/nec/ar9344_aterm/Makefile
  create mode 100644 board/nec/ar9344_aterm/ar9344_aterm.c
  create mode 100644 configs/nec_ar9344_aterm_defconfig
+ create mode 100644 configs/nec_ar9344_aterm_fe_defconfig
  create mode 100644 include/configs/nec_ar9344_aterm.h
 
 --- a/arch/mips/dts/Makefile
@@ -91,7 +93,7 @@ Subject: [PATCH] ath79: add support for NEC AR9344 Aterm series
  endmenu
 --- /dev/null
 +++ b/board/nec/ar9344_aterm/Kconfig
-@@ -0,0 +1,30 @@
+@@ -0,0 +1,33 @@
 +if BOARD_NEC_AR9344_ATERM
 +
 +config SYS_VENDOR
@@ -121,6 +123,9 @@ Subject: [PATCH] ath79: add support for NEC AR9344 Aterm series
 +config SYS_ICACHE_LINE_SIZE
 +	default 32
 +
++config BOARD_NEC_AR9344_ATERM_FE
++	bool "Aterm devices based on AR9344 with FE ports"
++
 +endif
 --- /dev/null
 +++ b/board/nec/ar9344_aterm/Makefile
@@ -130,7 +135,7 @@ Subject: [PATCH] ath79: add support for NEC AR9344 Aterm series
 +obj-y	= ar9344_aterm.o
 --- /dev/null
 +++ b/board/nec/ar9344_aterm/ar9344_aterm.c
-@@ -0,0 +1,59 @@
+@@ -0,0 +1,70 @@
 +// SPDX-License-Identifier: GPL-2.0+
 +/*
 + * Copyright (C) 2024 INAGAKI Hiroshi <musashino.open@gmail.com>
@@ -156,16 +161,27 @@ Subject: [PATCH] ath79: add support for NEC AR9344 Aterm series
 +	writel(0x2, regs + AR934X_GPIO_REG_FUNC);
 +
 +	/* Configure default GPIO OE/SET regs */
++#if defined(CONFIG_BOARD_NEC_AR9344_ATERM_FE)
++	writel(0x39b1f, regs + AR71XX_GPIO_REG_OE);
++	writel(0x040000, regs + AR71XX_GPIO_REG_SET);
++#else
 +	writel(0x3db1f, regs + AR71XX_GPIO_REG_OE);
 +	writel(0x142000, regs + AR71XX_GPIO_REG_SET);
++#endif
 +
 +	/* Configure pin multiplexing */
 +	writel(0x00000000, regs + AR934X_GPIO_REG_OUT_FUNC0);
 +	writel(0x0b0a0900, regs + AR934X_GPIO_REG_OUT_FUNC1);
 +	writel(0x00180000, regs + AR934X_GPIO_REG_OUT_FUNC2);
-+	writel(0x00000000, regs + AR934X_GPIO_REG_OUT_FUNC3);
 +	writel(0x2f2e0000, regs + AR934X_GPIO_REG_OUT_FUNC4);
++
++#if defined(CONFIG_BOARD_NEC_AR9344_ATERM_FE)
++	writel(0x002b2a00, regs + AR934X_GPIO_REG_OUT_FUNC3);
++	writel(0x002c2d00, regs + AR934X_GPIO_REG_OUT_FUNC5);
++#else
++	writel(0x00000000, regs + AR934X_GPIO_REG_OUT_FUNC3);
 +	writel(0x00000000, regs + AR934X_GPIO_REG_OUT_FUNC5);
++#endif
 +}
 +
 +#ifdef CONFIG_DEBUG_UART_BOARD_INIT
@@ -255,6 +271,71 @@ Subject: [PATCH] ath79: add support for NEC AR9344 Aterm series
 +CONFIG_SYS_NS16550=y
 +# CONFIG_GZIP is not set
 --- /dev/null
++++ b/configs/nec_ar9344_aterm_fe_defconfig
+@@ -0,0 +1,62 @@
++CONFIG_MIPS=y
++CONFIG_SYS_MALLOC_LEN=0x40000
++CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
++CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xbd007fff
++CONFIG_ENV_SIZE=0x1000
++CONFIG_DEFAULT_DEVICE_TREE="nec,ar9344-aterm"
++CONFIG_SYS_LOAD_ADDR=0x83000000
++CONFIG_ARCH_ATH79=y
++CONFIG_BOARD_NEC_AR9344_ATERM=y
++CONFIG_BOARD_NEC_AR9344_ATERM_FE=y
++CONFIG_SYS_MIPS_TIMER_FREQ=280000000
++CONFIG_MIPS_RELOCATION_TABLE_SIZE=0x4000
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_TIMESTAMP=y
++CONFIG_BOOTDELAY=3
++# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
++CONFIG_USE_BOOTARGS=y
++CONFIG_BOOTARGS="console=ttyS0,115200"
++CONFIG_USE_BOOTCOMMAND=y
++CONFIG_BOOTCOMMAND="bootm 0x9f040000"
++# CONFIG_DISPLAY_BOARDINFO is not set
++CONFIG_BOARD_EARLY_INIT_F=y
++CONFIG_SYS_MALLOC_BOOTPARAMS=y
++# CONFIG_CMDLINE_EDITING is not set
++# CONFIG_AUTO_COMPLETE is not set
++# CONFIG_SYS_LONGHELP is not set
++CONFIG_SYS_MAXARGS=32
++# CONFIG_SYS_XTRACE is not set
++# CONFIG_CMD_BDI is not set
++# CONFIG_CMD_CONSOLE is not set
++# CONFIG_BOOTM_PLAN9 is not set
++# CONFIG_BOOTM_RTEMS is not set
++# CONFIG_BOOTM_VXWORKS is not set
++# CONFIG_CMD_ELF is not set
++# CONFIG_CMD_FDT is not set
++# CONFIG_CMD_RUN is not set
++# CONFIG_CMD_XIMG is not set
++# CONFIG_CMD_EXPORTENV is not set
++# CONFIG_CMD_IMPORTENV is not set
++# CONFIG_CMD_EDITENV is not set
++# CONFIG_CMD_SAVEENV is not set
++# CONFIG_CMD_ENV_EXISTS is not set
++# CONFIG_CMD_CRC32 is not set
++# CONFIG_CMD_DM is not set
++# CONFIG_CMD_LOADS is not set
++# CONFIG_CMD_ECHO is not set
++# CONFIG_CMD_ITEST is not set
++# CONFIG_CMD_SOURCE is not set
++# CONFIG_CMD_SETEXPR is not set
++# CONFIG_CMD_SLEEP is not set
++# CONFIG_ISO_PARTITION is not set
++# CONFIG_OF_TAG_MIGRATE is not set
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_NO_NET=y
++CONFIG_CLK=y
++# CONFIG_GPIO is not set
++# CONFIG_I2C is not set
++# CONFIG_INPUT is not set
++# CONFIG_POWER is not set
++CONFIG_DM_SERIAL=y
++CONFIG_SYS_NS16550=y
++# CONFIG_GZIP is not set
+--- /dev/null
 +++ b/include/configs/nec_ar9344_aterm.h
 @@ -0,0 +1,28 @@
 +/* SPDX-License-Identifier: GPL-2.0+ */

package/boot/uboot-kirkwood/Makefile

@@ -25,6 +25,11 @@ define U-Boot/dns320l
   BUILD_DEVICES:=dlink_dns320l
 endef
 
+define U-Boot/dns325
+  NAME:=D-Link DNS-325 A1
+  BUILD_DEVICES:=dlink_dns-325-a1
+endef
+
 define U-Boot/dockstar
   NAME:=Seagate DockStar
   BUILD_DEVICES:=seagate_dockstar
@@ -112,6 +117,7 @@ endef
 
 UBOOT_TARGETS := \
 	dns320l \
+	dns325 \
 	dockstar dockstar_second_stage \
 	goflexhome \
 	ib62x0 ib62x0_second_stage \

package/boot/uboot-kirkwood/patches/011-arm-kirkwood-dns325-Correct-CONFIG_NR_DRAM_BANKS-parameter.patch

@@ -0,0 +1,27 @@
+From e7e650e8bdb09ac46da017250394f8c589df10bb Mon Sep 17 00:00:00 2001
+From: Tom Rini <trini@konsulko.com>
+Date: Mon, 14 Sep 2020 15:48:47 -0400
+Subject: [PATCH] arm: kirkwood: dns325: Correct CONFIG_NR_DRAM_BANKS parameter
+
+Testing on a DNS-325 NAS has shown that in order for the device to work
+we need to set CONFIG_NR_DRAM_BANKS to 1 and not 2.
+
+Tested-by: Dmitry N. Kolesnikov <dk.diklab@gmail.com>
+Reported-by: Dmitry N. Kolesnikov <dk.diklab@gmail.com>
+Cc: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
+Signed-off-by: Tom Rini <trini@konsulko.com>
+---
+ configs/dns325_defconfig | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/configs/dns325_defconfig
++++ b/configs/dns325_defconfig
+@@ -6,7 +6,7 @@ CONFIG_SYS_TEXT_BASE=0x600000
+ CONFIG_TARGET_DNS325=y
+ CONFIG_ENV_SIZE=0x20000
+ CONFIG_ENV_OFFSET=0xE0000
+-CONFIG_NR_DRAM_BANKS=2
++CONFIG_NR_DRAM_BANKS=1
+ CONFIG_IDENT_STRING="\nD-Link DNS-325"
+ # CONFIG_SYS_MALLOC_F is not set
+ CONFIG_BOOTDELAY=3

package/boot/uboot-kirkwood/patches/100-dns325.patch

@@ -0,0 +1,65 @@
+--- a/configs/dns325_defconfig
++++ b/configs/dns325_defconfig
+@@ -27,7 +27,7 @@ CONFIG_CMD_FAT=y
+ CONFIG_CMD_JFFS2=y
+ CONFIG_CMD_MTDPARTS=y
+ CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
+-CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)"
++CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0xe0000@0x0(u-boot),0x20000@0xe0000(u-boot-env),-@0x100000(ubi)"
+ CONFIG_CMD_UBI=y
+ CONFIG_ISO_PARTITION=y
+ CONFIG_OF_CONTROL=y
+--- a/include/configs/dns325.h
++++ b/include/configs/dns325.h
+@@ -66,46 +66,12 @@
+  */
+ 
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+-	"stdin=serial\0" \
+-	"stdout=serial\0" \
+-	"stderr=serial\0" \
+-	"loadaddr=0x800000\0" \
+-	"autoload=no\0" \
+-	"console=ttyS0,115200\0" \
+-	"mtdparts="CONFIG_MTDPARTS_DEFAULT \
+-	"optargs=\0" \
+-	"bootenv=uEnv.txt\0" \
+-	"importbootenv=echo Importing environment ...; " \
+-		"env import -t ${loadaddr} ${filesize}\0" \
+-	"loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
+-	"setbootargs=setenv bootargs console=${console} " \
+-		"${optargs} " \
+-		"${mtdparts} " \
+-		"root=${bootenvroot} " \
+-		"rootfstype=${bootenvrootfstype}\0" \
+-	"subbootcmd=run setbootargs; " \
+-		"if run bootenvloadimage; then " \
+-			"bootm ${loadaddr};" \
+-		"fi;\0" \
+-	"nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
+-	"nandrootfstype=ubifs\0" \
+-	"nandloadimage=nand read ${loadaddr} kernel\0" \
+-	"setnandbootenv=echo Booting from nand ...; " \
+-		"setenv bootenvroot ${nandroot}; " \
+-		"setenv bootenvrootfstype ${nandrootfstype}; " \
+-		"setenv bootenvloadimage ${nandloadimage}\0"
++	"mtdids="CONFIG_MTDIDS_DEFAULT "\0" \
++	"mtdparts="CONFIG_MTDPARTS_DEFAULT "\0"
+ 
+ #define CONFIG_BOOTCOMMAND \
+-	"if test -n ${bootenv} && usb start; then " \
+-		"if run loadbootenv; then " \
+-			"echo Loaded environment ${bootenv} from usb;" \
+-			"run importbootenv;" \
+-		"fi;" \
+-		"if test -n ${bootenvcmd}; then " \
+-			"echo Running bootenvcmd ...;" \
+-			"run bootenvcmd;" \
+-		"fi;" \
+-	"fi;" \
+-	"run setnandbootenv subbootcmd;"
++	"ubi part ubi; " \
++	"ubi read 0x800000 kernel; " \
++	"bootm 0x800000"
+ 
+ #endif /* _CONFIG_DNS325_H */

package/boot/uboot-kirkwood/patches/200-openwrt-config.patch

@@ -214,3 +214,23 @@
 +CONFIG_FIT_VERBOSE=y
  CONFIG_LZMA=y
 +CONFIG_LZO=y
+--- a/configs/dns325_defconfig
++++ b/configs/dns325_defconfig
+@@ -48,3 +48,8 @@ CONFIG_USB=y
+ CONFIG_DM_USB=y
+ CONFIG_USB_EHCI_HCD=y
+ CONFIG_USB_STORAGE=y
++CONFIG_CMD_BOOTZ=y
++CONFIG_FIT=y
++CONFIG_FIT_VERBOSE=y
++CONFIG_LZMA=y
++CONFIG_LZO=y
+--- a/include/configs/dns325.h
++++ b/include/configs/dns325.h
+@@ -74,4 +74,6 @@
+ 	"ubi read 0x800000 kernel; " \
+ 	"bootm 0x800000"
+ 
++#include "openwrt-kirkwood-common.h"
++
+ #endif /* _CONFIG_DNS325_H */

package/boot/uboot-mediatek/Makefile

@@ -231,6 +231,18 @@ define U-Boot/mt7981_abt_asr3000
   DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
 endef
 
+define U-Boot/mt7981_bazis-ax3000wm
+  NAME:=BAZIS AX3000WM
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=bazis_ax3000wm
+  UBOOT_CONFIG:=mt7981_bazis_ax3000wm
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
+endef
+
 define U-Boot/mt7981_cmcc_a10
   NAME:=CMCC A10
   BUILD_SUBTARGET:=filogic
@@ -309,9 +321,20 @@ define U-Boot/mt7981_cudy_tr3000-v1
   BUILD_DEVICES:=cudy_tr3000-v1-ubootmod
   UBOOT_CONFIG:=mt7981_cudy_tr3000-v1
   UBOOT_IMAGE:=u-boot.fip
-  BL2_BOOTDEV:=cudy-tr3000-v1
+  BL2_BOOTDEV:=cudy-ddr3
   BL2_SOC:=mt7981
-  DEPENDS:=+trusted-firmware-a-mt7981-cudy-tr3000-v1
+  DEPENDS:=+trusted-firmware-a-mt7981-cudy-ddr3
+endef
+
+define U-Boot/mt7981_cudy_wbr3000uax-v1
+  NAME:=Cudy WBR3000UAX v1
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=cudy_wbr3000uax-v1-ubootmod
+  UBOOT_CONFIG:=mt7981_cudy_wbr3000uax-v1
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=cudy-ddr3
+  BL2_SOC:=mt7981
+  DEPENDS:=+trusted-firmware-a-mt7981-cudy-ddr3
 endef
 
 define U-Boot/mt7981_glinet_gl-mt2500
@@ -362,6 +385,18 @@ define U-Boot/mt7981_h3c_magic-nx30-pro
   DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
 endef
 
+define U-Boot/mt7981_imou_hx21
+  NAME:=Imou HX21
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=imou_hx21
+  UBOOT_CONFIG:=mt7981_imou_hx21
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
+endef
+
 define U-Boot/mt7981_jcg_q30-pro
   NAME:=JCG Q30 PRO
   BUILD_SUBTARGET:=filogic
@@ -386,6 +421,18 @@ define U-Boot/mt7981_konka_komi-a31
   DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
 endef
 
+define U-Boot/mt7981_netis_nx30v2
+  NAME:=Netis NX30V2
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=netis_nx30v2
+  UBOOT_CONFIG:=mt7981_netis_nx30v2
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
+endef
+
 define U-Boot/mt7981_netis_nx31
   NAME:=netis NX31
   BUILD_SUBTARGET:=filogic
@@ -398,6 +445,18 @@ define U-Boot/mt7981_netis_nx31
   DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
 endef
 
+define U-Boot/mt7981_netis_nx32u
+  NAME:=netis NX32U
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=netis_nx32u
+  UBOOT_CONFIG:=mt7981_netis_nx32u
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
+endef
+
 define U-Boot/mt7981_nokia_ea0326gmp
   NAME:=Nokia EA0326GMP
   BUILD_SUBTARGET:=filogic
@@ -846,6 +905,17 @@ define U-Boot/mt7987_bananapi_bpi-r4-lite-nor
   FIP_COMPRESS:=1
 endef
 
+define U-Boot/mt7987_routerich_be7200
+  NAME:=Routerich BE7200
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=routerich_be7200
+  UBOOT_CONFIG:=mt7987a_routerich_be7200
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand0
+  BL2_SOC:=mt7987
+  DEPENDS:=+trusted-firmware-a-mt7987-spim-nand0
+endef
+
 define U-Boot/mt7988_arcadyan_mozart
   NAME:=Arcadyan Mozart
   BUILD_SUBTARGET:=filogic
@@ -1060,6 +1130,7 @@ UBOOT_TARGETS := \
 	mt7628_ravpower_rp-wd009 \
 	mt7629_rfb \
 	mt7981_abt_asr3000 \
+	mt7981_bazis-ax3000wm \
 	mt7981_cmcc_a10 \
 	mt7981_cmcc_rax3000m-emmc-ddr3 \
 	mt7981_cmcc_rax3000m-emmc-ddr4 \
@@ -1067,14 +1138,18 @@ UBOOT_TARGETS := \
 	mt7981_cmcc_rax3000m-nand-ddr4 \
 	mt7981_comfast_cf-wr632ax \
 	mt7981_cudy_tr3000-v1 \
+	mt7981_cudy_wbr3000uax-v1 \
 	mt7981_gatonetworks_gdsp \
 	mt7981_glinet_gl-mt2500 \
 	mt7981_glinet_gl-x3000 \
 	mt7981_glinet_gl-xe3000 \
 	mt7981_h3c_magic-nx30-pro \
+	mt7981_imou_hx21 \
 	mt7981_jcg_q30-pro \
 	mt7981_konka_komi-a31 \
+	mt7981_netis_nx30v2 \
 	mt7981_netis_nx31 \
+	mt7981_netis_nx32u \
 	mt7981_nokia_ea0326gmp \
 	mt7981_openwrt_one-snand \
 	mt7981_openwrt_one-nor \
@@ -1114,6 +1189,7 @@ UBOOT_TARGETS := \
 	mt7987_rfb-emmc \
 	mt7987_rfb-sd \
 	mt7987_rfb-spim-nand \
+	mt7987_routerich_be7200 \
 	mt7988_arcadyan_mozart \
 	mt7988_asus_zenwifi-bt8 \
 	mt7988_bananapi_bpi-r4-emmc \

package/boot/uboot-mediatek/patches/102-mtd-spinand-esmt-add-support-for-F50L1G41LC.patch

@@ -0,0 +1,68 @@
+Subject: [PATCH] mtd: spinand: esmt: add support for F50L1G41LC
+
+This adds support for ESMT F50L1G41LC, which appears to be an updated
+version of the already supported F50L1G41LB.
+Add esmt_8c SPI_NAND manufacturer to account for the newly used vendor
+ID with support for the ESMT F50L1G41LC chip.
+
+--- a/drivers/mtd/nand/spi/core.c
++++ b/drivers/mtd/nand/spi/core.c
+@@ -895,6 +895,7 @@ static const struct spinand_manufacturer
+ 	&toshiba_spinand_manufacturer,
+ 	&winbond_spinand_manufacturer,
+ 	&esmt_c8_spinand_manufacturer,
++	&esmt_8c_spinand_manufacturer,
+ 	&foresee_spinand_manufacturer,
+ 	&xtx_spinand_manufacturer,
+ };
+--- a/drivers/mtd/nand/spi/esmt.c
++++ b/drivers/mtd/nand/spi/esmt.c
+@@ -13,6 +13,7 @@
+ 
+ /* ESMT uses GigaDevice 0xc8 JECDEC ID on some SPI NANDs */
+ #define SPINAND_MFR_ESMT_C8			0xc8
++#define SPINAND_MFR_ESMT_8C			0x8c
+ 
+ static SPINAND_OP_VARIANTS(read_cache_variants,
+ 			   SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
+@@ -104,6 +105,18 @@ static const struct mtd_ooblayout_ops f5
+ 	.rfree = f50l1g41lb_ooblayout_free,
+ };
+ 
++static const struct spinand_info esmt_8c_spinand_table[] = {
++	SPINAND_INFO("F50L1G41LC",
++		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x2C),
++		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
++		     NAND_ECCREQ(1, 512),
++		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
++					      &write_cache_variants,
++					      &update_cache_variants),
++		     0,
++		     SPINAND_ECCINFO(&f50l1g41lb_ooblayout, NULL)),
++};
++
+ static const struct spinand_info esmt_c8_spinand_table[] = {
+ 	SPINAND_INFO("F50L1G41LB",
+ 		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x01),
+@@ -135,3 +148,11 @@ const struct spinand_manufacturer esmt_c
+ 	.nchips = ARRAY_SIZE(esmt_c8_spinand_table),
+ 	.ops = &esmt_spinand_manuf_ops,
+ };
++
++const struct spinand_manufacturer esmt_8c_spinand_manufacturer = {
++	.id = SPINAND_MFR_ESMT_8C,
++	.name = "ESMT",
++	.chips = esmt_8c_spinand_table,
++	.nchips = ARRAY_SIZE(esmt_8c_spinand_table),
++	.ops = &esmt_spinand_manuf_ops,
++};
+--- a/include/linux/mtd/spinand.h
++++ b/include/linux/mtd/spinand.h
+@@ -306,6 +306,7 @@ extern const struct spinand_manufacturer
+ extern const struct spinand_manufacturer toshiba_spinand_manufacturer;
+ extern const struct spinand_manufacturer winbond_spinand_manufacturer;
+ extern const struct spinand_manufacturer esmt_c8_spinand_manufacturer;
++extern const struct spinand_manufacturer esmt_8c_spinand_manufacturer;
+ extern const struct spinand_manufacturer foresee_spinand_manufacturer;
+ extern const struct spinand_manufacturer xtx_spinand_manufacturer;
+ 

package/boot/uboot-mediatek/patches/220-cmd-env-readmem.patch

@@ -104,7 +104,7 @@
 +U_BOOT_CMD_COMPLETE(
 +	readmem,	CONFIG_SYS_MAXARGS,	3,	do_env_readmem,
 +	"get environment variable from memory address",
-+	"name [-b] address size\n"
++	"[-b] name address size\n"
 +	"    - store memory address to env variable\n"
 +	"      \"-b\": read binary ethaddr",
 +	var_complete

package/boot/uboot-mediatek/patches/445-add-netis-nx32u.patch

@@ -0,0 +1,341 @@
+--- /dev/null
++++ b/configs/mt7981_netis_nx32u_defconfig
+@@ -0,0 +1,108 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7981-netis_nx32u"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_TARGET_MT7981=y
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_DEBUG_UART=y
++CONFIG_FIT=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981-netis_nx32u.dtb"
++CONFIG_LOGLEVEL=7
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_LOG=y
++# CONFIG_BOARD_INIT is not set
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_PROMPT="MT7981> "
++CONFIG_CMD_CPU=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_UUID=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_ENV_REDUNDANT=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_ENV_RELOC_GD_ENV_ADDR=y
++CONFIG_ENV_USE_DEFAULT_ENV_TEXT_FILE=y
++CONFIG_ENV_DEFAULT_ENV_TEXT_FILE="defenvs/netis_nx32u_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NETCONSOLE=y
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_CLK=y
++CONFIG_GPIO_HOG=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++# CONFIG_MMC is not set
++CONFIG_MTD=y
++CONFIG_DM_MTD=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTD_UBI_FASTMAP=y
++CONFIG_PHY_FIXED=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PHY=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_SERIAL_RX_BUFFER=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPIM=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
+--- /dev/null
++++ b/arch/arm/dts/mt7981-netis_nx32u.dts
+@@ -0,0 +1,167 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (c) 2026
++ * Author: Fil Dunsky <filipp.dunsky@gmail.com>
++ */
++
++/dts-v1/;
++#include "mt7981.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "netis NX32U";
++	compatible = "netis,nx32u", "mediatek,mt7981";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x10000000>;
++	};
++
++	keys {
++		compatible = "gpio-keys";
++
++		button-reset {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
++		};
++
++		button-mesh {
++			label = "mesh";
++			linux,code = <BTN_0>;
++			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	gpio-leds {
++		compatible = "gpio-leds";
++
++		led_internet {
++			label = "green:internet";
++			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
++		};
++
++		led_wps {
++			label = "green:wps";
++			gpios = <&pio 5 GPIO_ACTIVE_LOW>;
++		};
++
++		led_wifi2g {
++			label = "green:wifi2g";
++			gpios = <&pio 34 GPIO_ACTIVE_LOW>;
++		};
++
++		led_wifi5g {
++			label = "green:wifi5g";
++			gpios = <&pio 35 GPIO_ACTIVE_LOW>;
++		};
++
++		led_usb {
++			label = "green:usb";
++			gpios = <&pio 13 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&pio {
++	spi_flash_pins: spi0-pins-func-1 {
++		mux {
++			function = "flash";
++			groups = "spi0", "spi0_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
++		};
++
++		conf-pd {
++			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
++		};
++	};
++};
++
++&spi0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <2>;
++	sample_sel = <0>;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "BL2";
++				reg = <0x0 0x100000>;
++			};
++
++			partition@100000 {
++				label = "u-boot-env";
++				reg = <0x100000 0x80000>;
++			};
++
++			partition@160000 {
++				label = "Factory";
++				reg = <0x180000 0x200000>;
++			};
++
++			partition@380000 {
++				label = "FIP";
++				reg = <0x380000 0x200000>;
++			};
++
++			partition@580000 {
++				label = "ubi";
++				reg = <0x580000 0x7a80000>;
++			};
++		};
++	};
++};
++
++&watchdog {
++	status = "disabled";
++};
+--- /dev/null
++++ b/defenvs/netis_nx32u_env
+@@ -0,0 +1,57 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootcmd=run check_buttons ; if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-netis_nx32u-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-netis_nx32u-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-netis_nx32u-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-netis_nx32u-squashfs-sysupgrade.itb
++bootled_status=green:wps
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_status on ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_status on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led bootled_status off
++boot_recovery=led $bootled_status on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led bootled_status off
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=led $bootled_status on ; while true ; do run boot_tftp ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++check_buttons=if button reset ; then run boot_tftp ; fi
++ethaddr_factory=mtd read Factory 0x40080000 0x1e0000 0x20000 && env readmem -b ethaddr 0x4009ef20 0x6 ; setenv ethaddr_factory
++part_default=production
++part_recovery=recovery
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase FIP && mtd write FIP $loadaddr
++mtd_write_bl2=mtd erase BL2 && mtd write BL2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic || run ubi_format
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-mediatek/patches/448-add-comfast_cf-wr632ax.patch

@@ -283,7 +283,7 @@
 +bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
 +bootmenu_default=0
 +bootmenu_delay=0
-+bootmenu_title=      [0;34m( ( ( [1;39mOpenWrt[0;34m ) ) )
++bootmenu_title=      ( ( ( OpenWrt ) ) )
 +bootmenu_0=Initialize environment.=run _firstboot
 +bootmenu_0d=Run default boot command.=run boot_default
 +bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
@@ -291,8 +291,8 @@
 +bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
 +bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
 +bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
-+bootmenu_6=[31mLoad BL31+U-Boot FIP via TFTP then write to NAND.[0m=run boot_tftp_write_fip ; run bootmenu_confirm_return
-+bootmenu_7=[31mLoad BL2 preloader via TFTP then write to NAND.[0m=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
 +bootmenu_8=Reboot.=reset
 +bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
 +boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
@@ -320,4 +320,4 @@
 +_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
 +_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
 +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
-+_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       [33m$ver[0m"
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-mediatek/patches/449-add-cudy_wbr3000uax-v1.patch

@@ -0,0 +1,355 @@
+--- /dev/null
++++ b/configs/mt7981_cudy_wbr3000uax-v1_defconfig
+@@ -0,0 +1,108 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7981-cudy-wbr3000uax-v1"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_TARGET_MT7981=y
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_DEBUG_UART=y
++CONFIG_FIT=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981-cudy-wbr3000uax-v1.dtb"
++CONFIG_LOGLEVEL=7
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_LOG=y
++# CONFIG_BOARD_INIT is not set
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_PROMPT="MT7981> "
++CONFIG_CMD_CPU=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_UUID=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_ENV_REDUNDANT=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_ENV_RELOC_GD_ENV_ADDR=y
++CONFIG_ENV_USE_DEFAULT_ENV_TEXT_FILE=y
++CONFIG_ENV_DEFAULT_ENV_TEXT_FILE="defenvs/cudy_wbr3000uax-v1_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NETCONSOLE=y
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_CLK=y
++CONFIG_GPIO_HOG=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++# CONFIG_MMC is not set
++CONFIG_MTD=y
++CONFIG_DM_MTD=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTD_UBI_FASTMAP=y
++CONFIG_PHY_FIXED=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PHY=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_SERIAL_RX_BUFFER=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPIM=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
+--- /dev/null
++++ b/arch/arm/dts/mt7981-cudy-wbr3000uax-v1.dts
+@@ -0,0 +1,184 @@
++// SPDX-License-Identifier: GPL-2.0-or-later
++
++/dts-v1/;
++#include "mt7981.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "Cudy WBR3000UAX v1";
++	compatible = "mediatek,mt7981", "mediatek,mt7981-rfb";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x20000000>;
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++
++		button-reset {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
++		};
++
++		button-wps {
++			label = "wps";
++			linux,code = <KEY_WPS_BUTTON>;
++			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	gpio-leds {
++		compatible = "gpio-leds";
++
++		led_status: led_power {
++			label = "blue:power";
++			gpios = <&pio 8 GPIO_ACTIVE_LOW>;
++		};
++
++		led_wan_blue {
++			label = "blue:wan";
++			gpios = <&pio 10 GPIO_ACTIVE_LOW>;
++		};
++		
++		led_wan_red {
++			label = "red:wan";
++			gpios = <&pio 4 GPIO_ACTIVE_LOW>;
++		};
++
++		led_lan {
++			label = "blue:lan";
++			gpios = <&pio 11 GPIO_ACTIVE_LOW>;
++		};
++
++		led_wps_blue {
++			label = "blue:wps";
++			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
++		};
++
++		led_wps_red {
++			label = "red:wps";
++			gpios = <&pio 5 GPIO_ACTIVE_LOW>;
++		};
++
++		led_wifi2g {
++			label = "blue:wifi2g";
++			gpios = <&pio 6 GPIO_ACTIVE_LOW>;
++		};
++
++		led_wifi5g {
++			label = "blue:wifi5g";
++			gpios = <&pio 7 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&pio {
++	spi_flash_pins: spi0-pins-func-1 {
++		mux {
++			function = "flash";
++			groups = "spi0", "spi0_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
++		};
++
++		conf-pd {
++			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
++		};
++	};
++};
++
++&spi0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <2>;
++	sample_sel = <0>;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "bl2";
++				reg = <0x0 0x100000>;
++			};
++
++			partition@100000 {
++				label = "u-boot-env";
++				reg = <0x100000 0x80000>;
++			};
++
++			partition@180000 {
++				label = "factory";
++				reg = <0x180000 0x200000>;
++			};
++
++			partition@380000 {
++				label = "bdinfo";
++				reg = <0x380000 0x40000>;
++			};
++
++			partition@3c0000 {
++				label = "fip";
++				reg = <0x3c0000 0x200000>;
++			};
++
++			partition@5c0000 {
++				label = "ubi";
++				reg = <0x5c0000 0x7a40000>;
++				compatible = "linux,ubi";
++			};
++		};
++	};
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&watchdog {
++	status = "disabled";
++};
+--- /dev/null
++++ b/defenvs/cudy_wbr3000uax-v1_env
+@@ -0,0 +1,54 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-cudy_wbr3000uax-v1-ubootmod-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-cudy_wbr3000uax-v1-ubootmod-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-cudy_wbr3000uax-v1-ubootmod-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-cudy_wbr3000uax-v1-ubootmod-squashfs-sysupgrade.itb
++bootled_pwr=blue:power
++bootled_rec=red:wan
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic || run ubi_format
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-mediatek/patches/461-add-netis-nx30v2.patch

@@ -0,0 +1,390 @@
+--- /dev/null
++++ b/arch/arm/dts/mt7981-netis-nx30v2.dts
+@@ -0,0 +1,160@@
++// SPDX-License-Identifier: GPL-2.0
++
++/dts-v1/;
++#include "mt7981.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++
++/ {
++	model = "Netis NX30V2";
++	compatible = "mediatek,mt7981", "mediatek,mt7981-rfb";
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x10000000>;
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++
++		reset {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
++		};
++
++		wps {
++			label = "wps";
++			linux,code = <KEY_WPS_BUTTON>;
++			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		internet {
++			label = "internet";
++			gpios = <&pio 7 GPIO_ACTIVE_LOW>;
++		};
++
++		power {
++			label = "power";
++			gpios = <&pio 4 GPIO_ACTIVE_LOW>;
++		};
++
++		wifi {
++			label = "wifi";
++			gpios = <&pio 34 GPIO_ACTIVE_LOW>;
++		};
++
++		wps {
++			label = "wps";
++			gpios = <&pio 5 GPIO_ACTIVE_LOW>;
++		};
++
++		wan {
++			label = "wan";
++			gpios = <&pio 8 GPIO_ACTIVE_LOW>;
++		};
++
++	};
++
++};
++
++&uart0 {
++	status = "okay";
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "auto";
++	reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&pio {
++	spi_flash_pins: spi0-pins-func-1 {
++		mux {
++			function = "flash";
++			groups = "spi0", "spi0_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
++		};
++
++		conf-pd {
++			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
++		};
++	};
++};
++
++&spi0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi_flash_pins>;
++	status = "okay";
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <2>;
++	sample_sel = <0>;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "BL2";
++				reg = <0x0 0x100000>;
++			};
++
++			partition@100000 {
++				label = "u-boot-env";
++				reg = <0x100000 0x80000>;
++			};
++
++			partition@180000 {
++				label = "Factory";
++				reg = <0x180000 0x200000>;
++			};
++
++			partition@380000 {
++				label = "FIP";
++				reg = <0x380000 0x200000>;
++			};
++
++			partition@580000 {
++				label = "ubi";
++				reg = <0x580000 0x7280000>;
++			};
++		};
++	};
++};
++
++&watchdog {
++	status = "disabled";
++};
+--- /dev/null
++++ b/configs/mt7981_netis_nx30v2_defconfig
+@@ -0,0 +1,156 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7981-netis-nx30v2"
++CONFIG_TARGET_MT7981=y
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_DEBUG_UART=y
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON_CMD=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_SW_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_SPI_BOOT=y
++CONFIG_BOOTSTD_DEFAULTS=y
++CONFIG_BOOTSTD_FULL=y
++CONFIG_USE_PREBOOT=y
++CONFIG_SYS_CBSIZE=512
++CONFIG_SYS_PBSIZE=1049
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_LOGLEVEL=7
++CONFIG_LOG=y
++# CONFIG_BOARD_INIT is not set
++CONFIG_SYS_PROMPT="MT7981> "
++# CONFIG_BOOTM_NETBSD is not set
++# CONFIG_BOOTM_PLAN9 is not set
++# CONFIG_BOOTM_RTEMS is not set
++# CONFIG_BOOTM_VXWORKS is not set
++# CONFIG_CMD_UNLZ4 is not set
++# CONFIG_CMD_UNZIP is not set
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DFU=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_ELF=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_NAND=y
++# CONFIG_MTD_RAW_NAND is not set
++CONFIG_CMD_NAND_TRIMFFS=y
++CONFIG_CMD_PCI=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_SF=y
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_CMD_UBIFS=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPPUT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_UUID=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_SIZE=0x1f000
++CONFIG_ENV_SIZE_REDUND=0x1f000
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_ENV_UBI_VOLUME_CREATE=y
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_ENV_USE_DEFAULT_ENV_TEXT_FILE=y
++CONFIG_ENV_DEFAULT_ENV_TEXT_FILE="defenvs/netis_nx30v2.env"
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_NETCONSOLE=y
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
++CONFIG_REGEX=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++# CONFIG_MMC is not set
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_MTD=y
++CONFIG_DM_MTD=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_DM_SPI_FLASH=y
++CONFIG_SPI_FLASH_SFDP_SUPPORT=y
++CONFIG_SPI_FLASH_EON=y
++CONFIG_SPI_FLASH_GIGADEVICE=y
++CONFIG_SPI_FLASH_ISSI=y
++CONFIG_SPI_FLASH_MACRONIX=y
++CONFIG_SPI_FLASH_SPANSION=y
++CONFIG_SPI_FLASH_STMICRO=y
++CONFIG_SPI_FLASH_WINBOND=y
++CONFIG_SPI_FLASH_XMC=y
++CONFIG_SPI_FLASH_XTX=y
++CONFIG_SPI_FLASH_MTD=y
++CONFIG_PHY_FIXED=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_SERIAL=y
++CONFIG_SERIAL_RX_BUFFER=y
++CONFIG_SERIAL_RX_BUFFER_SIZE=256
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPIM=y
++CONFIG_HEXDUMP=y
++# CONFIG_EFI_LOADER is not set
++CONFIG_LMB_MAX_REGIONS=64
++CONFIG_OF_SYSTEM_SETUP=y
++CONFIG_UPDATE_COMMON=y
++CONFIG_UPDATE_FIT=y
++CONFIG_CONSOLE_MUX=y
+--- /dev/null
++++ b/defenvs/netis_nx30v2.env
+@@ -0,0 +1,64 @@
++#misc settings
++serverip=192.168.1.254
++ipaddr=192.168.1.1
++ncip=192.168.1.254
++loadaddr=0x46000000
++return_bootmenu=askenv - Press ENTER to return to menu ; bootmenu 60
++
++#file name defines
++bootfile_bl2=openwrt-mediatek-filogic-netis_nx30v2-spim-nand-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-netis_nx30v2-spim-nand-bl31-uboot.fip
++bootfile_rec=openwrt-mediatek-filogic-netis_nx30v2-initramfs.itb
++bootfile_fw=openwrt-mediatek-filogic-netis_nx30v2-squashfs-sysupgrade.itb
++
++#boot commands
++bootconf=config-1
++boot_recovery=tftpboot $bootfile_rec && iminfo && bootm $loadaddr#$bootconf
++boot_nand=ubi read $loadaddr fit;bootm $loadaddr#$bootconf
++bootcmd=run boot_nand; while true; do run boot_recovery; done
++
++#bootmenu
++bootmenu_default=0
++bootmenu_0=Startup system (Default)=run bootcmd
++bootmenu_1=Upgrade firmware via TFTP=run upgrade_fw ; run return_bootmenu
++bootmenu_2=Startup recovery image via TFTP=run boot_recovery ; run return_bootmenu
++bootmenu_3=Upgrade BL2 preloader via TFTP=run upgrade_bl2 ; run return_bootmenu
++bootmenu_4=Upgrade BL31+U-Boot FIP via TFTP=run upgrade_fip ; run return_bootmenu
++bootmenu_5=Reset all settings to factory default.=run reset_all; reset
++bootmenu_6=Reboot.=reset
++
++#upgrade commands
++upgrade_bl2=run led_blink_downloading && tftpboot $bootfile_bl2 && run led_blink_writing && nand erase BL2 && nand write $loadaddr BL2; run led_on
++upgrade_fip=run led_blink_downloading && tftpboot $bootfile_fip && run led_blink_writing && nand erase FIP && nand write $loadaddr FIP; run led_on
++upgrade_fw=run led_blink_downloading && tftpboot $bootfile_fw && iminfo && run led_blink_writing && if ubi check fit; then ubi remove fit; else true; fi && ubi create fit $filesize && ubi write $loadaddr fit $filesize; run led_on
++
++#restore offical bootloader
++offical_download=run led_blink_downloading; setenv failed 1; while test $failed -eq 1; do setenv bl2addr 0x46000000 && tftpboot $bl2addr bl2.img && setenv fipaddr 0x46380000 && tftpboot $fipaddr fip.bin && setenv failed 0; done; setenv customer 0; setenv customeraddr 0x46580000 && tftpboot $customeraddr customer && setenv customer 1; test $failed -eq 0
++offical_write=run led_blink_writing; nand erase BL2 && nand write $bl2addr BL2 && nand erase FIP && nand write $fipaddr FIP; ubi detach; mtd erase ubi; ubi part ubi; if test $customer -eq 1; then ubi create customer $filesize; ubi write $customeraddr customer $filesize; fi; true
++offical_upgrade=run offical_download offical_write led_on; echo upgrade offical bootloader done; while true; do sleep 10; done
++
++#factory default
++reset_env=env default -a && saveenv
++reset_usr=ubi check rootfs_data && ubi remove rootfs_data; run create_rootfs_data
++reset_all=run reset_env reset_usr
++
++#prepare ethaddr and rootfs_data at preload
++rootfs_data_max=0x5300000
++create_rootfs_data=if env exists rootfs_data_max; then ubi create rootfs_data $rootfs_data_max; else ubi create rootfs_data -; fi
++set_ethaddr=mtd read Factory $loadaddr 0x1fe000 0x1000 && setexpr tmpaddr $loadaddr + 0xf20 && mw.b $loadaddr 0 6 && cmp.b $loadaddr $tmpaddr 6 || readmem -b ethaddr $tmpaddr 0x6
++preboot=run set_ethaddr; if ubi part; then else mtd erase ubi; ubi part ubi; fi; ubi check rootfs_data || run create_rootfs_data
++
++#led
++led_blink_downloading=led internet blink 100; led wifi blink 100; led wps blink 100
++led_blink_writing=led internet blink 1000; led wifi blink 1000; led wps blink 1000
++led_on=led internet on; led wifi on; led wps on
++
++#netconsole
++netconsole=setenv stdout serial,nc;setenv stdin serial,nc
++nonetconcole=setenv stdout serial;setenv stdin serial
++
++# button commands
++button_cmd_0=run netconsole led_on; sleep 5; if button wps; then run nonetconcole offical_upgrade; fi
++button_cmd_0_name=wps
++button_cmd_1=run netconsole led_on reset_all; sleep 5; if button reset; then run nonetconcole; while true; do run upgrade_fw && run boot_nand; done; fi
++button_cmd_1_name=reset

package/boot/uboot-mediatek/patches/466-add-imou-hx21.patch

@@ -0,0 +1,342 @@
+--- /dev/null
++++ b/configs/mt7981_imou_hx21_defconfig
+@@ -0,0 +1,108 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7981-imou-hx21"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_TARGET_MT7981=y
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_DEBUG_UART=y
++CONFIG_FIT=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981-imou-hx21.dtb"
++CONFIG_LOGLEVEL=7
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_LOG=y
++# CONFIG_BOARD_INIT is not set
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_PROMPT="MT7981> "
++CONFIG_CMD_CPU=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_UUID=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_ENV_REDUNDANT=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_ENV_RELOC_GD_ENV_ADDR=y
++CONFIG_ENV_USE_DEFAULT_ENV_TEXT_FILE=y
++CONFIG_ENV_DEFAULT_ENV_TEXT_FILE="defenvs/imou_hx21_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NETCONSOLE=y
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_CLK=y
++CONFIG_GPIO_HOG=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++# CONFIG_MMC is not set
++CONFIG_MTD=y
++CONFIG_DM_MTD=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTD_UBI_FASTMAP=y
++CONFIG_PHY_FIXED=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PHY=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_SERIAL_RX_BUFFER=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPIM=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
+--- /dev/null
++++ b/arch/arm/dts/mt7981-imou-hx21.dts
+@@ -0,0 +1,171 @@
++// SPDX-License-Identifier: GPL-2.0-or-later
++
++/dts-v1/;
++#include "mt7981.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "Imou HX21";
++	compatible = "imou,hx21", "mediatek,mt7981", "mediatek,mt7981-rfb";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x10000000>;
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++
++
++		button-reset {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
++		};
++
++		button-mesh {
++			label = "mesh";
++			linux,code = <BTN_9>;
++			linux,input-type = <EV_SW>;
++			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	gpio-leds {
++		compatible = "gpio-leds";
++
++		power_led: led-0 {
++			label = "green:power";
++			gpios = <&pio 4 GPIO_ACTIVE_LOW>;
++			default-state = "on";
++		};
++
++		led-1 {
++			label = "green:wan";
++			gpios = <&pio 5 GPIO_ACTIVE_LOW>;
++			default-state = "off";
++		};
++
++		led-2 {
++			label = "red:wan";
++			gpios = <&pio 6 GPIO_ACTIVE_LOW>;
++			default-state = "off";
++		};
++
++		led-3 {
++			label = "green:lan";
++			gpios = <&pio 7 GPIO_ACTIVE_LOW>;
++			default-state = "off";
++		};
++
++		led-4 {
++			label = "green:wlan";
++			gpios = <&pio 8 GPIO_ACTIVE_LOW>;
++			default-state = "off";
++		};
++	};
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&pio {
++	spi_flash_pins: spi0-pins-func-1 {
++		mux {
++			function = "flash";
++			groups = "spi0", "spi0_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_00>;
++		};
++
++		conf-pd {
++			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
++		};
++	};
++};
++
++&spi0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <2>;
++	sample_sel = <0>;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "bl2";
++				reg = <0x00000 0x0100000>;
++			};
++
++			partition@100000 {
++				label = "u-boot-env";
++				reg = <0x0100000 0x0080000>;
++			};
++
++			partition@180000 {
++				label = "factory";
++				reg = <0x180000 0x0200000>;
++			};
++
++			partition@380000 {
++				label = "fip";
++				reg = <0x380000 0x0200000>;
++			};
++
++			partition@580000 {
++				label = "ubi";
++				reg = <0x580000 0x7a80000>;
++				compatible = "linux,ubi";
++			};
++		};
++	};
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&watchdog {
++	status = "disabled";
++};
+--- /dev/null
++++ b/defenvs/imou_hx21_env
+@@ -0,0 +1,54 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-imou_hx21-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-imou_hx21-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-imou_hx21-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-imou_hx21-squashfs-sysupgrade.itb
++bootled_pwr=green:power
++bootled_rec=green:power
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic || run ubi_format
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-mediatek/patches/467-add-routerich-be7200.patch

@@ -0,0 +1,373 @@
+--- /dev/null
++++ b/configs/mt7987a_routerich_be7200_defconfig
+@@ -0,0 +1,133 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7987a-routerich_be7200"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_TARGET_MT7987=y
++CONFIG_CPU_ARMV8=y
++CONFIG_SYS_BOOTM_LEN=0x6000000
++CONFIG_SYS_LOAD_ADDR=0x48000000
++CONFIG_PRE_CON_BUF_ADDR=0x4007ef00
++CONFIG_DEBUG_UART_BASE=0x11000000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_DEBUG_UART=y
++CONFIG_FIT=y
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_DEFAULT_FDT_FILE="mt7987a-routerich_be7200"
++CONFIG_SYS_CBSIZE=512
++CONFIG_SYS_PBSIZE=1049
++CONFIG_LOGLEVEL=7
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_LOG=y
++# CONFIG_BOARD_INIT is not set
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_PROMPT="MT7987> "
++# CONFIG_BOOTM_NETBSD is not set
++# CONFIG_BOOTM_PLAN9 is not set
++# CONFIG_BOOTM_RTEMS is not set
++# CONFIG_BOOTM_VXWORKS is not set
++# CONFIG_CMD_BOOTEFI_BOOTMGR is not set
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_I2C=y
++CONFIG_CMD_MMC=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_PCI=y
++CONFIG_CMD_USB=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_UUID=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_EXT4=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++# CONFIG_CMD_XIMG is not set
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_ENV_REDUNDANT=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_ENV_USE_DEFAULT_ENV_TEXT_FILE=y
++CONFIG_ENV_DEFAULT_ENV_TEXT_FILE="defenvs/routerich_be7200_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NETCONSOLE=y
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_NETMASK=y
++CONFIG_NETMASK="255.255.255.0"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_CLK=y
++CONFIG_DM_I2C=y
++CONFIG_SYS_I2C_MTK=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++# CONFIG_MMC is not set
++CONFIG_MTD=y
++CONFIG_DM_MTD=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTD_UBI_FASTMAP=y
++CONFIG_PHY_ETHERNET_ID=y
++CONFIG_PHY_FIXED=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7987=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_MTK=y
++CONFIG_SCSI=y
++CONFIG_DM_SERIAL=y
++CONFIG_SERIAL_RX_BUFFER=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPIM=y
++CONFIG_USB=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_XHCI_MTK=y
++CONFIG_USB_STORAGE=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
+--- /dev/null
++++ b/defenvs/routerich_be7200_env
+@@ -0,0 +1,57 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x48000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootcmd=run check_buttons ; if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-routerich_be7200-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-routerich_be7200-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-routerich_be7200-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-routerich_be7200-squashfs-sysupgrade.itb
++bootled_status=blue:status
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_status on ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_status on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led bootled_status off
++boot_recovery=led $bootled_status on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led bootled_status off
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=led $bootled_status on ; while true ; do run boot_tftp ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++check_buttons=if button reset ; then run boot_tftp ; fi
++ethaddr_factory=mtd read Factory 0x40080000 0x0 0x20000 && env readmem -b ethaddr 0x40080004 0x6 ; setenv ethaddr_factory
++part_default=production
++part_recovery=recovery
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase FIP && mtd write FIP $loadaddr
++mtd_write_bl2=mtd erase BL2 && mtd write BL2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic || run ubi_format
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"
+--- /dev/null
++++ b/arch/arm/dts/mt7987a-routerich_be7200.dts
+@@ -0,0 +1,77 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (c) 2025
++ * Author: Mikhail Zhilkin <csharper2005@gmail.com>
++ */
++
++/dts-v1/;
++#include "mt7987a.dtsi"
++#include <dt-bindings/input/input.h>
++
++/ {
++	model = "Routerich BE7200";
++	compatible = "routerich,be7200",
++		     "mediatek,mt7987";
++
++	gpio-keys {
++		compatible = "gpio-keys";
++
++		button-0 {
++			label = "mesh";
++			linux,code = <KEY_WPS_BUTTON>;
++			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
++			debounce-interval = <10>;
++		};
++
++		button-1 {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
++			debounce-interval = <10>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		led-0 {
++			label = "blue:status";
++			gpios = <&pio 4 GPIO_ACTIVE_LOW>;
++		};
++
++		led-1 {
++			label = "blue:wlan5g";
++			gpios = <&pio 5 GPIO_ACTIVE_LOW>;
++		};
++
++		led-2 {
++			label = "blue:mesh";
++			gpios = <&pio 7 GPIO_ACTIVE_LOW>;
++		};
++
++		led-3 {
++			label = "red:wan";
++			gpios = <&pio 8 GPIO_ACTIVE_LOW>;
++		};
++
++		led-4 {
++			label = "blue:wan";
++			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
++		};
++
++		led-5 {
++			label = "blue:lan3";
++			gpios = <&pio 10 GPIO_ACTIVE_LOW>;
++		};
++
++		led-6 {
++			label = "blue:lan2";
++			gpios = <&pio 11 GPIO_ACTIVE_LOW>;
++		};
++
++		led-7 {
++			label = "blue:lan1";
++			gpios = <&pio 12 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
+--- a/arch/arm/dts/Makefile
++++ b/arch/arm/dts/Makefile
+@@ -1138,6 +1138,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
+ 	mt7986b-emmc-rfb.dtb \
+ 	mt7987a-emmc-rfb.dtb \
+ 	mt7987a-rfb.dtb \
++	mt7987a-routerich_be7200.dtb \
+ 	mt7987a-sd-rfb.dtb \
+ 	mt7988-rfb.dtb \
+ 	mt7988-sd-rfb.dtb \
+--- /dev/null
++++ b/arch/arm/dts/mt7987a-routerich_be7200-u-boot.dtsi
+@@ -0,0 +1,84 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (c) 2025
++ * Author: Mikhail Zhilkin <csharper2005@gmail.com>
++ */
++
++#include "mt7987a-u-boot.dtsi"
++#include "mt7987-netsys-u-boot.dtsi"
++
++/ {
++	model = "Routerich BE7200";
++	compatible = "routerich,be7200",
++		     "mediatek,mt7987";
++};
++
++&eth0 {
++	status = "okay";
++	pinctrl-names = "default";
++	pinctrl-0 = <&mdio0_pins>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "auto";
++	reset-gpios = <&pio 42 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++		pause;
++	};
++};
++
++&spi0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi0_flash_pins>;
++	#address-cells = <1>;
++	#size-cells = <0>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <2>;
++	sample_sel = <0>;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++		spi-max-frequency = <52000000>;
++		spi-rx-bus-width = <4>;
++		spi-tx-bus-width = <4>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "BL2";
++				reg = <0x0 0x100000>;
++			};
++
++			partition@100000 {
++				label = "u-boot-env (unused)";
++				reg = <0x100000 0x80000>;
++			};
++
++			partition@180000 {
++				label = "Factory";
++				reg = <0x180000 0x400000>;
++			};
++
++			partition@580000 {
++				label = "FIP";
++				reg = <0x580000 0x200000>;
++			};
++
++			partition@780000 {
++				label = "ubi";
++				reg = <0x780000 0x1f880000>;
++				compatible = "linux,ubi";
++			};
++		};
++	};
++};

package/boot/uboot-mediatek/patches/502-add-bazis-ax3000wm.patch

@@ -0,0 +1,329 @@
+--- /dev/null
++++ b/configs/mt7981_bazis_ax3000wm_defconfig
+@@ -0,0 +1,107 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7981-bazis-ax3000wm"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_TARGET_MT7981=y
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_PRE_CON_BUF_ADDR=0x4007ef00
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_DEBUG_UART=y
++CONFIG_FIT=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981-bazis-ax3000wm.dtb"
++CONFIG_LOGLEVEL=7
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_LOG=y
++# CONFIG_BOARD_INIT is not set
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_PROMPT="MT7981> "
++CONFIG_CMD_CPU=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_UUID=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_ENV_REDUNDANT=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_ENV_RELOC_GD_ENV_ADDR=y
++CONFIG_ENV_USE_DEFAULT_ENV_TEXT_FILE=y
++CONFIG_ENV_DEFAULT_ENV_TEXT_FILE="defenvs/bazis_ax3000wm_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NETCONSOLE=y
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_CLK=y
++CONFIG_GPIO_HOG=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++# CONFIG_MMC is not set
++CONFIG_MTD=y
++CONFIG_DM_MTD=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTD_UBI_FASTMAP=y
++CONFIG_PHY_FIXED=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_SERIAL_RX_BUFFER=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPIM=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
+--- /dev/null
++++ b/arch/arm/dts/mt7981-bazis-ax3000wm.dts
+@@ -0,0 +1,159 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (c) 2026
++ * Author: Fil Dunsky <filipp.dunsky@gmail.com>
++ */
++
++/dts-v1/;
++#include "mt7981.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "Bazis AX3000WM";
++	compatible = "bazis,ax3000wm", "mediatek,mt7981";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x10000000>;
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++
++		reset {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
++		};
++
++		mesh {
++			label = "mesh";
++			linux,code = <KEY_RFKILL>;
++			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		led_status: led_power {
++			label = "blue:power";
++			gpios = <&pio 13 GPIO_ACTIVE_LOW>;
++		};
++		
++		led_warning: led_fault {
++			label = "red:fault";
++			gpios = <&pio 34 GPIO_ACTIVE_LOW>;
++		};
++
++		led_status_green: led-2 {
++			label = "green:status";
++			gpios = <&pio 35 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <1>;
++	phy-mode = "gmii";
++	phy-handle = <&phy0>;
++
++	mdio {
++		phy0: ethernet-phy@0 {
++			compatible = "ethernet-phy-id03a2.9461";
++			reg = <0x0>;
++			phy-mode = "gmii";
++		};
++	};
++};
++
++&pio {
++	spi_flash_pins: spi0-pins-func-1 {
++		mux {
++			function = "flash";
++			groups = "spi0", "spi0_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
++			drive-strength = <MTK_DRIVE_4mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
++		};
++
++		conf-pd {
++			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
++			drive-strength = <MTK_DRIVE_4mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
++		};
++	};
++};
++
++&spi0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <2>;
++	sample_sel = <0>;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "BL2";
++				reg = <0x0 0x100000>;
++			};
++
++			partition@100000 {
++				label = "u-boot-env";
++				reg = <0x100000 0x80000>;
++			};
++
++			partition@180000 {
++				label = "Factory";
++				reg = <0x180000 0x200000>;
++			};
++
++			partition@380000 {
++				label = "FIP";
++				reg = <0x380000 0x200000>;
++			};
++
++			partition@580000 {
++				label = "ubi";
++				reg = <0x580000 0x7a40000>;
++			};
++		};
++	};
++};
++
++&watchdog {
++	status = "disabled";
++};
+--- /dev/null
++++ b/defenvs/bazis_ax3000wm_env
+@@ -0,0 +1,54 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-bazis_ax3000wm-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-bazis_ax3000wm-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-bazis_ax3000wm-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-bazis_ax3000wm-squashfs-sysupgrade.itb
++bootled_pwr=blue:power
++bootled_rec=red:fault
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic || run ubi_format
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-microchipsw/Makefile

@@ -0,0 +1,46 @@
+include $(TOPDIR)/rules.mk
+
+PKG_RELEASE:=1
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://github.com/microchip-ung/u-boot.git
+PKG_SOURCE_DATE:=2025-09-22
+PKG_SOURCE_VERSION:=c1abab62a00a6b8f43f663a0a30dd0a7fd6a4e95
+PKG_MIRROR_HASH:=6405c426afd8bacbb4cc985da4ca1bd04b54a0d2aa3bb3ba8f7571dbe5913055
+
+PKG_MAINTAINER:=Robert Marko <robert.marko@sartura.hr>
+
+include $(INCLUDE_DIR)/u-boot.mk
+include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+define U-Boot/Default
+  BUILD_TARGET:=microchipsw
+  HIDDEN:=1
+  UBOOT_IMAGE:=u-boot.bin
+endef
+
+define U-Boot/ev23x71a
+  NAME:=Microchip EV23X71A
+  BUILD_DEVICES:=microchip_ev23x71a
+  BUILD_SUBTARGET:=lan969x
+  UBOOT_CONFIG:=mchp_lan969x
+endef
+
+define U-Boot/tactical-1000
+  NAME:=Novarq Tactical 1000
+  BUILD_DEVICES:=novarq_tactical-1000
+  BUILD_SUBTARGET:=lan969x
+  UBOOT_CONFIG:=mchp_lan969x
+endef
+
+UBOOT_TARGETS:= \
+	ev23x71a \
+	tactical-1000
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
+	$(CP) $(PKG_BUILD_DIR)/$(UBOOT_IMAGE) $(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-$(UBOOT_IMAGE)
+endef
+
+$(eval $(call BuildPackage/U-Boot))

package/boot/uboot-microchipsw/patches/200-cmd-add-imsz-and-imszb.patch

@@ -0,0 +1,139 @@
+--- a/cmd/bootm.c
++++ b/cmd/bootm.c
+@@ -260,6 +260,76 @@ U_BOOT_CMD(
+ /* iminfo - print header info for a requested image */
+ /*******************************************************************/
+ #if defined(CONFIG_CMD_IMI)
++#define SECTOR_SHIFT 9
++static int image_totalsize(struct cmd_tbl *cmdtp, int flag, int argc,
++			   char *const argv[], short int in_blocks)
++{
++	ulong addr;
++	void *hdr;
++	uint32_t bsize, tsize = 0;
++	char buf[16];
++
++	if (argc >= 2)
++		addr = simple_strtoul(argv[1], NULL, 16);
++	else
++		addr = image_load_addr;
++
++	hdr = (void *)map_sysmem(addr, 0);
++
++	switch (genimg_get_format(hdr)) {
++	case IMAGE_FORMAT_LEGACY:
++		if(CONFIG_IS_ENABLED(LEGACY_IMAGE_FORMAT))
++			tsize = image_get_image_size(hdr);
++		break;
++	case IMAGE_FORMAT_FIT:
++		if(CONFIG_IS_ENABLED(FIT))
++			tsize = fit_get_totalsize(hdr);
++		break;
++	}
++
++	unmap_sysmem(hdr);
++	if (tsize == 0)
++		return 1;
++
++	bsize = (tsize >> SECTOR_SHIFT) + ((tsize & ((1 << SECTOR_SHIFT) - 1))?1:0);
++
++	if (!in_blocks)
++		snprintf(buf, sizeof(buf), "%x", tsize);
++	else
++		snprintf(buf, sizeof(buf), "%x", bsize);
++
++	if (argc >= 3)
++		return env_set(argv[2], buf);
++	else
++		printf("%s\n", buf);
++
++	return 0;
++}
++
++static int do_imsz(struct cmd_tbl *cmdtp, int flag, int argc,
++		     char *const argv[])
++{
++	return image_totalsize(cmdtp, flag, argc, argv, 0);
++}
++
++static int do_imszb(struct cmd_tbl *cmdtp, int flag, int argc,
++		     char *const argv[])
++{
++	return image_totalsize(cmdtp, flag, argc, argv, 1);
++}
++
++U_BOOT_CMD(
++	imsz,	CONFIG_SYS_MAXARGS,	1,	do_imsz,
++	"get image total size (in bytes)",
++	"addr [maxhdrlen] [varname]\n"
++);
++
++U_BOOT_CMD(
++	imszb,	CONFIG_SYS_MAXARGS,	1,	do_imszb,
++	"get image total size (in blocks)",
++	"addr [maxhdrlen] [varname]\n"
++);
++
+ static int do_iminfo(struct cmd_tbl *cmdtp, int flag, int argc,
+ 		     char *const argv[])
+ {
+--- a/boot/image-fit.c
++++ b/boot/image-fit.c
+@@ -2054,6 +2054,47 @@ static const char *fit_get_image_type_pr
+ 	return "unknown";
+ }
+ 
++size_t fit_get_totalsize(const void *fit)
++{
++	int ret, ndepth, noffset, images_noffset;
++	size_t data_size, hdrsize, img_total, max_size = 0;
++	const void *data;
++
++	ret = fdt_check_header(fit);
++	if (ret) {
++		debug("Wrong FIT format: not a flattened device tree (err=%d)\n",
++			  ret);
++		return 0;
++	}
++
++	hdrsize = fdt_totalsize(fit);
++
++	/* take care of simple FIT with internal images */
++	max_size = hdrsize;
++
++	images_noffset = fdt_path_offset(fit, FIT_IMAGES_PATH);
++	if (images_noffset < 0)
++		goto out;
++
++	for (ndepth = 0,
++	     noffset = fdt_next_node(fit, images_noffset, &ndepth);
++	     (noffset >= 0) && (ndepth > 0);
++	     noffset = fdt_next_node(fit, noffset, &ndepth)) {
++		if (ndepth == 1) {
++			ret = fit_image_get_data(fit, noffset, &data, &data_size);
++			if (ret)
++				goto out;
++
++			img_total = data_size + (data - fit);
++
++			max_size = (max_size > img_total) ? max_size : img_total;
++		}
++	}
++
++out:
++	return max_size;
++}
++
+ int fit_image_load(struct bootm_headers *images, ulong addr,
+ 		   const char **fit_unamep, const char **fit_uname_configp,
+ 		   int arch, int ph_type, int bootstage_id,
+--- a/include/image.h
++++ b/include/image.h
+@@ -1113,6 +1113,7 @@ int fit_parse_subimage(const char *spec,
+ 		ulong *addr, const char **image_name);
+ 
+ int fit_get_subimage_count(const void *fit, int images_noffset);
++size_t fit_get_totalsize(const void *fit);
+ void fit_print_contents(const void *fit);
+ void fit_image_print(const void *fit, int noffset, const char *p);
+ 

package/boot/uboot-microchipsw/src/board/microchip/lan969x/lan969x.env

@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+fdt_high=0xffffffff
+baudrate=115200
+bootdelay=3
+loadaddr=0x64000000
+bootargs=console=ttyAT0,115200 root=PARTLABEL=rootfs rootwait
+mmc_read_kernel=mmc read $loadaddr $part_addr 0x100 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr $part_addr $image_size
+boot_system=part start mmc 0 kernel part_addr && part size mmc 0 kernel part_size && run mmc_read_kernel && bootm
+bootcmd=run boot_system
+filesize_to_blk=setexpr cnt $filesize + 0x1ff && setexpr cnt $cnt / 0x200
+mmc_write_fip=part start mmc 0 fip part_addr && part size mmc 0 fip part_size && run filesize_to_blk && test 0x$cnt -le 0x$part_size && mmc erase fip && mmc write $loadaddr $part_addr $cnt

package/boot/uboot-mvebu/Makefile

@@ -22,6 +22,13 @@ define U-Boot/Default
   HIDDEN:=1
 endef
 
+define U-Boot/mox
+  NAME:=CZ.NIC Turris Mox
+  BUILD_DEVICES:=cznic_turris-mox
+  BUILD_SUBTARGET:=cortexa53
+  UBOOT_CONFIG:=turris_mox
+endef
+
 define U-Boot/clearfog
   NAME:=SolidRun ClearFog A1
   BUILD_DEVICES:=solidrun_clearfog-base-a1 solidrun_clearfog-pro-a1
@@ -68,11 +75,20 @@ define U-Boot/rb5009
   UBOOT_IMAGE:=u-boot.elf
 endef
 
+define U-Boot/atlas
+  NAME:=RIPE Atlas Probe v5
+  BUILD_DEVICES:=ripe_atlas-v5
+  BUILD_SUBTARGET:=cortexa53
+  UBOOT_CONFIG:=turris_mox
+endef
+
 UBOOT_TARGETS:= \
+	mox \
 	clearfog \
 	helios4 \
 	omnia \
 	espressobin \
+	atlas \
 	uDPU \
 	eDPU \
 	rb5009

package/boot/uboot-qoriq/Makefile

@@ -0,0 +1,80 @@
+#
+# Copyright (C) 2016 Jiang Yutang <jiangyutang1978@gmail.com>
+# Copyright (C) 2025 Pawel Dembicki <paweldembicki@gmail.com>
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_VERSION:=2025.01
+PKG_HASH:=cdef7d507c93f1bbd9f015ea9bc21fa074268481405501945abc6f854d5b686f
+PKG_RELEASE:=1
+
+include $(INCLUDE_DIR)/u-boot.mk
+include $(INCLUDE_DIR)/package.mk
+
+TOOLCHAIN_NAME:=openwrt-toolchain-24.10.4-mpc85xx-p2020_gcc-13.3.0_musl.Linux-x86_64
+TOOLCHAIN_FILE:=$(TOOLCHAIN_NAME).tar.zst
+TOOLCHAIN_PATH:=$(PKG_BUILD_DIR)/$(TOOLCHAIN_NAME)/toolchain-powerpc_8548_gcc-13.3.0_musl/bin
+TOOLCHAIN_CROSS_COMPILE:=powerpc-openwrt-linux-musl-
+
+define Download/uboot-qoriq-toolchain
+  FILE:=$(TOOLCHAIN_FILE)
+  URL:=https://downloads.openwrt.org/releases/24.10.4/targets/mpc85xx/p2020/
+  URL_FILE:=$(TOOLCHAIN_FILE)
+  HASH:=c16566bb3625b6c45e4184b9d37953d4c3c1dcdec1141a45df834da626d4c08d
+endef
+
+define U-Boot/Default
+  BUILD_TARGET:=qoriq
+  BUILD_SUBTARGET:=generic
+  BUILD_DEVICES:=$(1)
+  ENV_SIZE:=0x2000
+endef
+
+define U-Boot/fsl_T4240RDB-nor
+  NAME:=NXP T4240RDB NOR Boot
+  BUILD_DEVICES:=fsl_T4240RDB
+  UBOOT_CONFIG:=T4240RDB
+  UBOOT_IMAGE:=u-boot-dtb.bin
+endef
+
+define U-Boot/fsl_T4240RDB-sdboot
+  NAME:=NXP T4240RDB SD Card Boot
+  BUILD_DEVICES:=fsl_T4240RDB
+  UBOOT_CONFIG:=T4240RDB_SDCARD
+  UBOOT_IMAGE:=u-boot-with-spl-pbl.bin
+endef
+
+UBOOT_TARGETS := \
+  fsl_T4240RDB-nor \
+  fsl_T4240RDB-sdboot
+
+define Build/Prepare
+		$(Build/Prepare/Default)
+	$(TAR) -I $(STAGING_DIR_HOST)/bin/zstd -xf $(DL_DIR)/$(TOOLCHAIN_FILE) -C $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile/U-Boot
+	+$(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR) \
+		CROSS_COMPILE=$(TOOLCHAIN_PATH)/$(TOOLCHAIN_CROSS_COMPILE) \
+		$(if $(DTC),DTC="$(DTC)") \
+		$(UBOOT_MAKE_FLAGS)
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(UBOOT_IMAGE) \
+		$(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-uboot.bin
+	$(PKG_BUILD_DIR)/tools/mkenvimage -b -s $(ENV_SIZE) \
+		-o $(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-uboot-env.bin \
+		files/$(BUILD_VARIANT)-uEnv.txt
+endef
+
+define Package/u-boot/install/default
+endef
+
+$(eval $(call Download,uboot-qoriq-toolchain))
+$(eval $(call BuildPackage/U-Boot))

package/boot/uboot-qoriq/files/fsl_T4240RDB-nor-uEnv.txt

@@ -0,0 +1,8 @@
+bootm_size=0x180000000
+loadaddr=0x2000000
+fwaddr=0xe8000000
+hwconfig=fsl_ddr:ctlr_intlv=3way_4KB,bank_intlv=auto;usb1:dr_mode=host,phy_type=utmi
+nor_boot=bootm $fwaddr
+bootargs=console=ttyS0,115200
+bootcmd=echo starting OpenWrt ...;run nor_boot
+bootdelay=3

package/boot/uboot-qoriq/files/fsl_T4240RDB-sdboot-uEnv.txt

@@ -0,0 +1,7 @@
+bootm_size=0x180000000
+loadaddr=0x2000000
+hwconfig=fsl_ddr:ctlr_intlv=3way_4KB,bank_intlv=auto;usb1:dr_mode=host,phy_type=utmi
+sd_boot=ext4load mmc 0:1 $loadaddr fitImage;bootm $loadaddr
+bootargs=root=/dev/mmcblk0p2 rw rootwait rootfstype=squashfs,f2fs noinitrd console=ttyS0,115200 mtdparts=fe8000000.nor:126m(firmware-nor),1m(cortina-ucode),128k(fman),128k(u-boot-env),768k(u-boot)
+bootcmd=echo starting OpeWwrt ...;run sd_boot
+bootdelay=3

package/boot/uboot-qoriq/patches/100-mpc85xx-adjust-T4240RDB-config-for-OpenWrt.patch

@@ -0,0 +1,68 @@
+From ec36a44809e22a60fc153a4078d35c83a2bf9676 Mon Sep 17 00:00:00 2001
+From: Pawel Dembicki <paweldembicki@gmail.com>
+Date: Thu, 6 Oct 2022 15:18:38 +0200
+Subject: [PATCH] mpc85xx: adjust T4240RDB config for OpenWrt
+
+Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
+---
+ configs/T4240RDB_SDCARD_defconfig | 6 ++++--
+ include/configs/T4240RDB.h        | 6 +++++-
+ 2 files changed, 9 insertions(+), 3 deletions(-)
+
+--- a/configs/T4240RDB_SDCARD_defconfig
++++ b/configs/T4240RDB_SDCARD_defconfig
+@@ -4,7 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
+ CONFIG_SPL_LIBGENERIC_SUPPORT=y
+ CONFIG_SF_DEFAULT_SPEED=10000000
+ CONFIG_ENV_SIZE=0x2000
+-CONFIG_ENV_OFFSET=0x100000
++CONFIG_ENV_OFFSET=0x101000
+ CONFIG_DEFAULT_DEVICE_TREE="t4240rdb"
+ CONFIG_SYS_MONITOR_LEN=786432
+ CONFIG_SPL_MMC=y
+@@ -35,7 +35,7 @@ CONFIG_FIT_VERBOSE=y
+ CONFIG_RAMBOOT_PBL=y
+ CONFIG_SYS_FSL_PBL_PBI="$(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg"
+ CONFIG_SYS_FSL_PBL_RCW="$(SRCTREE)/board/freescale/t4rdb/t4_sd_rcw.cfg"
+-CONFIG_BOOTDELAY=10
++CONFIG_BOOTDELAY=1
+ CONFIG_OF_BOARD_SETUP=y
+ CONFIG_OF_STDOUT_VIA_ALIAS=y
+ CONFIG_USE_BOOTCOMMAND=y
+@@ -71,6 +71,7 @@ CONFIG_CMD_DHCP=y
+ CONFIG_CMD_MII=y
+ CONFIG_CMD_PING=y
+ CONFIG_CMD_EXT2=y
++CONFIG_CMD_EXT4=y
+ CONFIG_CMD_FAT=y
+ CONFIG_OF_CONTROL=y
+ CONFIG_ENV_OVERWRITE=y
+@@ -108,7 +109,8 @@ CONFIG_SPI_FLASH_SST=y
+ CONFIG_PHYLIB=y
+ CONFIG_PHYLIB_10G=y
+ CONFIG_PHY_CORTINA=y
+-CONFIG_CORTINA_FW_ADDR=0x77f000
++CONFIG_SYS_CORTINA_FW_IN_MMC=y
++CONFIG_CORTINA_FW_ADDR=0x200000
+ CONFIG_PHY_TERANETICS=y
+ CONFIG_PHY_VITESSE=y
+ CONFIG_DM_MDIO=y
+--- a/configs/T4240RDB_defconfig
++++ b/configs/T4240RDB_defconfig
+@@ -26,7 +26,7 @@ CONFIG_SYS_FSL_NUM_CC_PLLS=5
+ CONFIG_MP=y
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+-CONFIG_BOOTDELAY=10
++CONFIG_BOOTDELAY=1
+ CONFIG_OF_BOARD_SETUP=y
+ CONFIG_OF_STDOUT_VIA_ALIAS=y
+ CONFIG_USE_BOOTCOMMAND=y
+@@ -76,6 +76,7 @@ CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+ CONFIG_SYS_FLASH_EMPTY_INFO=y
+ CONFIG_SYS_FLASH_CFI=y
+ CONFIG_SYS_FLASH_QUIET_TEST=y
++CONFIG_SYS_MALLOC_F_LEN=0x1000
+ CONFIG_SYS_MAX_FLASH_SECT=1024
+ CONFIG_SYS_MAX_FLASH_BANKS=2
+ CONFIG_DM_SPI_FLASH=y

package/boot/uboot-qoriq/patches/900-Revert-fsl-mxc-Drop-legacy-I2c.patch

@@ -0,0 +1,44 @@
+From 7041fc96942acca920699b354e956bc4966c9b00 Mon Sep 17 00:00:00 2001
+From: Pawel Dembicki <paweldembicki@gmail.com>
+Date: Wed, 19 Nov 2025 11:58:10 +0100
+Subject: [PATCH] Revert "fsl: mxc: Drop legacy I2c"
+
+This reverts commit 98dfa70f84f036c7423f1eddf00af8ea555fed8f.
+
+It broke SDCARD boot in T4240RDB.
+
+Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
+---
+ drivers/ddr/fsl/main.c | 3 ++-
+ drivers/i2c/mxc_i2c.c  | 1 -
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/ddr/fsl/main.c
++++ b/drivers/ddr/fsl/main.c
+@@ -111,7 +111,7 @@ static int ddr_i2c_read(DEV_TYPE *dev, u
+ #if CONFIG_IS_ENABLED(DM_I2C)
+ 	ret = dm_i2c_read(dev, 0, buf, len);
+ #else
+-	ret = 0;
++	ret = i2c_read(dev->chip, addr, alen, buf, len);
+ #endif
+ 
+ 	return ret;
+@@ -162,6 +162,7 @@ static void __get_spd(generic_spd_eeprom
+ 	};
+ 	dev = &ldev;
+ 
++	i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM);
+ #endif
+ 
+ #ifdef CONFIG_SYS_FSL_DDR4
+--- a/drivers/i2c/mxc_i2c.c
++++ b/drivers/i2c/mxc_i2c.c
+@@ -619,7 +619,6 @@ int enable_i2c_clk(unsigned char enable,
+ 	__attribute__((weak, alias("__enable_i2c_clk")));
+ 
+ #if !CONFIG_IS_ENABLED(DM_I2C)
+-
+ /*
+  * Read data from I2C device
+  *

package/boot/uboot-rockchip/Makefile

@@ -174,6 +174,13 @@ define U-Boot/rk3528/Default
   TPL:=rk3528_ddr_1056MHz_v1.11.bin
 endef
 
+define U-Boot/hinlink-h28k-rk3528
+  $(U-Boot/rk3528/Default)
+  NAME:=HINLINK H28K
+  BUILD_DEVICES:= \
+    hinlink_h28k
+endef
+
 define U-Boot/radxa-e20c-rk3528
   $(U-Boot/rk3528/Default)
   NAME:=E20C
@@ -244,6 +251,13 @@ define U-Boot/bpi-r2-pro-rk3568
     sinovoip_bpi-r2-pro
 endef
 
+define U-Boot/easepi-r1-rk3568
+  $(U-Boot/rk3568/Default)
+  NAME:=LinkEase EasePi R1
+  BUILD_DEVICES:= \
+    linkease_easepi-r1
+endef
+
 define U-Boot/fastrhino-r66s-rk3568
   $(U-Boot/rk3568/Default)
   NAME:=FastRhino R66S
@@ -251,13 +265,6 @@ define U-Boot/fastrhino-r66s-rk3568
     lunzn_fastrhino-r66s
 endef
 
-define U-Boot/generic-rk3568
-  $(U-Boot/rk3568/Default)
-  NAME:=Generic RK3566/RK3568 board
-  BUILD_DEVICES:= \
-    linkease_easepi-r1
-endef
-
 define U-Boot/nanopi-r5c-rk3568
   $(U-Boot/rk3568/Default)
   NAME:=NanoPi R5C
@@ -420,6 +427,7 @@ UBOOT_TARGETS := \
   rock64-rk3328 \
   rock-pi-e-rk3328 \
   rock-pi-e-v3-rk3328 \
+  hinlink-h28k-rk3528 \
   radxa-e20c-rk3528 \
   rock-2-rk3528 \
   nanopi-r3s-rk3566 \
@@ -427,8 +435,8 @@ UBOOT_TARGETS := \
   radxa-zero-3-rk3566 \
   rock-3c-rk3566 \
   bpi-r2-pro-rk3568 \
+  easepi-r1-rk3568 \
   fastrhino-r66s-rk3568 \
-  generic-rk3568 \
   nanopi-r5c-rk3568 \
   nanopi-r5s-rk3568 \
   radxa-e25-rk3568 \

package/boot/uboot-rockchip/patches/105-1-arm64-dts-rockchip-add-LinkEase-EasePi-R1.patch

@@ -0,0 +1,662 @@
+From 63d60b21fd4933080ff22bdc21652f7c2a14bc52 Mon Sep 17 00:00:00 2001
+From: Liangbin Lian <jjm2473@gmail.com>
+Date: Tue, 14 Oct 2025 13:12:26 +0800
+Subject: [PATCH 1/2] arm64: dts: rockchip: add LinkEase EasePi R1
+
+LinkEase EasePi R1 [1] is a high-performance mini router.
+
+Specification:
+- Rockchip RK3568
+- 2GB/4GB LPDDR4 RAM
+- 16GB on-board eMMC
+- 1x M.2 key for 2280 NVMe (PCIe 3.0)
+- 1x USB 3.0 Type-A
+- 1x USB 2.0 Type-C (for USB flashing)
+- 2x 1000 Base-T (native, RTL8211F)
+- 2x 2500 Base-T (PCIe, RTL8125B)
+- 1x HDMI 2.0 Output
+- 12v DC Jack
+- 1x Power key connected to PMIC
+- 2x LEDs (one static power supplied, one GPIO controlled)
+
+[1] https://doc.linkease.com/zh/guide/easepi-r1/hardware.html
+
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Signed-off-by: Liangbin Lian <jjm2473@gmail.com>
+Link: https://patch.msgid.link/20251014051226.64255-4-jjm2473@gmail.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+
+[ upstream commit: deaefeaf3df433d50935b9a85076041040f06d74 ]
+
+Signed-off-by: Liangbin Lian <jjm2473@gmail.com>
+---
+ .../src/arm64/rockchip/rk3568-easepi-r1.dts   | 623 ++++++++++++++++++
+ 1 file changed, 623 insertions(+)
+ create mode 100644 dts/upstream/src/arm64/rockchip/rk3568-easepi-r1.dts
+
+--- /dev/null
++++ b/dts/upstream/src/arm64/rockchip/rk3568-easepi-r1.dts
+@@ -0,0 +1,623 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++
++/dts-v1/;
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++#include <dt-bindings/leds/common.h>
++#include <dt-bindings/pinctrl/rockchip.h>
++#include <dt-bindings/soc/rockchip,vop2.h>
++#include "rk3568.dtsi"
++
++/ {
++	model = "LinkEase EasePi R1";
++	compatible = "linkease,easepi-r1", "rockchip,rk3568";
++
++	aliases {
++		ethernet0 = &gmac0;
++		ethernet1 = &gmac1;
++		mmc0 = &sdhci;
++	};
++
++	chosen: chosen {
++		stdout-path = "serial2:1500000n8";
++	};
++
++	adc-keys {
++		compatible = "adc-keys";
++		io-channels = <&saradc 0>;
++		io-channel-names = "buttons";
++		keyup-threshold-microvolt = <1800000>;
++
++		button-recovery {
++			label = "Recovery";
++			linux,code = <KEY_VENDOR>;
++			press-threshold-microvolt = <1750>;
++		};
++	};
++
++	gpio-leds {
++		compatible = "gpio-leds";
++		pinctrl-names = "default";
++		pinctrl-0 = <&status_led_pin>;
++
++		status_led: led-status {
++			color = <LED_COLOR_ID_GREEN>;
++			function = LED_FUNCTION_STATUS;
++			gpios = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>;
++			linux,default-trigger = "heartbeat";
++		};
++	};
++
++	hdmi-con {
++		compatible = "hdmi-connector";
++		type = "a";
++
++		port {
++			hdmi_con_in: endpoint {
++				remote-endpoint = <&hdmi_out_con>;
++			};
++		};
++	};
++
++	dc_12v: regulator-dc-12v {
++		compatible = "regulator-fixed";
++		regulator-name = "dc_12v";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <12000000>;
++		regulator-max-microvolt = <12000000>;
++	};
++
++	vcc5v0_sys: regulator-vcc5v0-sys {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc5v0_sys";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		vin-supply = <&dc_12v>;
++	};
++
++	vcc3v3_sys: regulator-vcc3v3-sys {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc3v3_sys";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		vin-supply = <&dc_12v>;
++	};
++
++	pcie30_avdd0v9: regulator-pcie30-avdd0v9 {
++		compatible = "regulator-fixed";
++		regulator-name = "pcie30_avdd0v9";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <900000>;
++		regulator-max-microvolt = <900000>;
++		vin-supply = <&vcc3v3_sys>;
++	};
++
++	pcie30_avdd1v8: regulator-pcie30-avdd1v8 {
++		compatible = "regulator-fixed";
++		regulator-name = "pcie30_avdd1v8";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <1800000>;
++		regulator-max-microvolt = <1800000>;
++		vin-supply = <&vcc3v3_sys>;
++	};
++
++	regulator-vdd0v95-25glan {
++		compatible = "regulator-fixed";
++		enable-active-high;
++		gpio = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&vdd0v95_25glan_en>;
++		regulator-name = "vdd0v95_25glan";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <950000>;
++		regulator-max-microvolt = <950000>;
++		vin-supply = <&vcc3v3_sys>;
++	};
++
++	vcc3v3_nvme: regulator-vcc3v3-nvme {
++		compatible = "regulator-fixed";
++		enable-active-high;
++		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&vcc3v3_nvme_en>;
++		regulator-name = "vcc3v3_nvme";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		vin-supply = <&dc_12v>;
++	};
++
++};
++
++&combphy1 {
++	status = "okay";
++};
++
++&combphy2 {
++	status = "okay";
++};
++
++&cpu0 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&cpu1 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&cpu2 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&cpu3 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&gmac0 {
++	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
++	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
++	assigned-clock-rates = <0>, <125000000>;
++	phy-handle = <&rgmii_phy0>;
++	phy-mode = "rgmii-id";
++	pinctrl-names = "default";
++	pinctrl-0 = <&gmac0_miim
++		     &gmac0_tx_bus2
++		     &gmac0_rx_bus2
++		     &gmac0_rgmii_clk
++		     &gmac0_rgmii_bus>;
++	status = "okay";
++};
++
++&gmac1 {
++	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
++	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
++	assigned-clock-rates = <0>, <125000000>;
++	phy-handle = <&rgmii_phy1>;
++	phy-mode = "rgmii-id";
++	pinctrl-names = "default";
++	pinctrl-0 = <&gmac1m1_miim
++		     &gmac1m1_tx_bus2
++		     &gmac1m1_rx_bus2
++		     &gmac1m1_rgmii_clk
++		     &gmac1m1_rgmii_bus>;
++	status = "okay";
++};
++
++&gpu {
++	mali-supply = <&vdd_gpu>;
++	status = "okay";
++};
++
++&hdmi {
++	avdd-0v9-supply = <&vdda0v9_image>;
++	avdd-1v8-supply = <&vcca1v8_image>;
++	status = "okay";
++};
++
++&hdmi_in {
++	hdmi_in_vp0: endpoint {
++		remote-endpoint = <&vp0_out_hdmi>;
++	};
++};
++
++&hdmi_out {
++	hdmi_out_con: endpoint {
++		remote-endpoint = <&hdmi_con_in>;
++	};
++};
++
++&hdmi_sound {
++	status = "okay";
++};
++
++&i2c0 {
++	status = "okay";
++
++	vdd_cpu: regulator@1c {
++		compatible = "tcs,tcs4525";
++		reg = <0x1c>;
++		fcs,suspend-voltage-selector = <1>;
++		regulator-name = "vdd_cpu";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <800000>;
++		regulator-max-microvolt = <1150000>;
++		regulator-ramp-delay = <2300>;
++		vin-supply = <&vcc5v0_sys>;
++
++		regulator-state-mem {
++			regulator-off-in-suspend;
++		};
++	};
++
++	rk809: pmic@20 {
++		compatible = "rockchip,rk809";
++		reg = <0x20>;
++		interrupt-parent = <&gpio0>;
++		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
++		#clock-cells = <1>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&pmic_int>;
++		system-power-controller;
++		vcc1-supply = <&vcc3v3_sys>;
++		vcc2-supply = <&vcc3v3_sys>;
++		vcc3-supply = <&vcc3v3_sys>;
++		vcc4-supply = <&vcc3v3_sys>;
++		vcc5-supply = <&vcc3v3_sys>;
++		vcc6-supply = <&vcc3v3_sys>;
++		vcc7-supply = <&vcc3v3_sys>;
++		vcc8-supply = <&vcc3v3_sys>;
++		vcc9-supply = <&vcc3v3_sys>;
++		wakeup-source;
++
++		regulators {
++			vdd_logic: DCDC_REG1 {
++				regulator-name = "vdd_logic";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-initial-mode = <0x2>;
++				regulator-min-microvolt = <500000>;
++				regulator-max-microvolt = <1350000>;
++				regulator-ramp-delay = <6001>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdd_gpu: DCDC_REG2 {
++				regulator-name = "vdd_gpu";
++				regulator-always-on;
++				regulator-initial-mode = <0x2>;
++				regulator-min-microvolt = <500000>;
++				regulator-max-microvolt = <1350000>;
++				regulator-ramp-delay = <6001>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc_ddr: DCDC_REG3 {
++				regulator-name = "vcc_ddr";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-initial-mode = <0x2>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++				};
++			};
++
++			vdd_npu: DCDC_REG4 {
++				regulator-name = "vdd_npu";
++				regulator-initial-mode = <0x2>;
++				regulator-min-microvolt = <500000>;
++				regulator-max-microvolt = <1350000>;
++				regulator-ramp-delay = <6001>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc_1v8: DCDC_REG5 {
++				regulator-name = "vcc_1v8";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdda0v9_image: LDO_REG1 {
++				regulator-name = "vdda0v9_image";
++				regulator-min-microvolt = <950000>;
++				regulator-max-microvolt = <950000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdda_0v9: LDO_REG2 {
++				regulator-name = "vdda_0v9";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <900000>;
++				regulator-max-microvolt = <900000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdda0v9_pmu: LDO_REG3 {
++				regulator-name = "vdda0v9_pmu";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <900000>;
++				regulator-max-microvolt = <900000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <900000>;
++				};
++			};
++
++			vccio_acodec: LDO_REG4 {
++				regulator-name = "vccio_acodec";
++				regulator-min-microvolt = <3300000>;
++				regulator-max-microvolt = <3300000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vccio_sd: LDO_REG5 {
++				regulator-name = "vccio_sd";
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <3300000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc3v3_pmu: LDO_REG6 {
++				regulator-name = "vcc3v3_pmu";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <3300000>;
++				regulator-max-microvolt = <3300000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <3300000>;
++				};
++			};
++
++			vcca_1v8: LDO_REG7 {
++				regulator-name = "vcca_1v8";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcca1v8_pmu: LDO_REG8 {
++				regulator-name = "vcca1v8_pmu";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <1800000>;
++				};
++			};
++
++			vcca1v8_image: LDO_REG9 {
++				regulator-name = "vcca1v8_image";
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc_3v3: SWITCH_REG1 {
++				regulator-name = "vcc_3v3";
++				regulator-always-on;
++				regulator-boot-on;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc3v3_sd: SWITCH_REG2 {
++				regulator-name = "vcc3v3_sd";
++				regulator-always-on;
++				regulator-boot-on;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++		};
++	};
++};
++
++&i2s0_8ch {
++	status = "okay";
++};
++
++&mdio0 {
++	rgmii_phy0: ethernet-phy@1 {
++		compatible = "ethernet-phy-ieee802.3-c22";
++		reg = <0x1>;
++		pinctrl-0 = <&eth_phy0_reset_pin>;
++		pinctrl-names = "default";
++		reset-assert-us = <20000>;
++		reset-deassert-us = <100000>;
++		reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
++	};
++};
++
++&mdio1 {
++	rgmii_phy1: ethernet-phy@1 {
++		compatible = "ethernet-phy-ieee802.3-c22";
++		reg = <0x1>;
++		pinctrl-0 = <&eth_phy1_reset_pin>;
++		pinctrl-names = "default";
++		reset-assert-us = <20000>;
++		reset-deassert-us = <100000>;
++		reset-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>;
++	};
++};
++
++/* ETH3 */
++&pcie2x1 {
++	reset-gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
++	vpcie3v3-supply = <&vcc3v3_sys>;
++	status = "okay";
++};
++
++&pcie30phy {
++	data-lanes = <1 2>;
++	status = "okay";
++};
++
++/* ETH2 */
++&pcie3x1 {
++	num-lanes = <1>;
++	reset-gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
++	vpcie3v3-supply = <&vcc3v3_sys>;
++	status = "okay";
++};
++
++/* M.2 Key for 2280 NVMe */
++&pcie3x2 {
++	num-lanes = <1>;
++	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
++	vpcie3v3-supply = <&vcc3v3_nvme>;
++	status = "okay";
++};
++
++&pinctrl {
++	gmac0 {
++		eth_phy0_reset_pin: eth-phy0-reset-pin {
++			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
++		};
++	};
++
++	gmac1 {
++		eth_phy1_reset_pin: eth-phy1-reset-pin {
++			rockchip,pins = <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
++		};
++	};
++
++	gpio-leds {
++		status_led_pin: status-led-pin {
++			rockchip,pins = <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	nvme {
++		vcc3v3_nvme_en: vcc3v3-nvme-en {
++			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	pcie-nic {
++		vdd0v95_25glan_en: vdd0v95-25glan-en {
++			rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	pmic {
++		pmic_int: pmic-int {
++			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
++		};
++	};
++
++};
++
++&pmu_io_domains {
++	pmuio1-supply = <&vcc3v3_pmu>;
++	pmuio2-supply = <&vcc3v3_pmu>;
++	vccio1-supply = <&vccio_acodec>;
++	vccio3-supply = <&vccio_sd>;
++	vccio4-supply = <&vcc_1v8>;
++	vccio5-supply = <&vcc_3v3>;
++	vccio6-supply = <&vcc_1v8>;
++	vccio7-supply = <&vcc_3v3>;
++	status = "okay";
++};
++
++&saradc {
++	vref-supply = <&vcca_1v8>;
++	status = "okay";
++};
++
++&sdhci {
++	bus-width = <8>;
++	max-frequency = <200000000>;
++	non-removable;
++	pinctrl-names = "default";
++	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
++	status = "okay";
++};
++
++&tsadc {
++	rockchip,hw-tshut-mode = <1>;
++	rockchip,hw-tshut-polarity = <0>;
++	status = "okay";
++};
++
++&uart2 {
++	status = "okay";
++};
++
++/* OTG Only USB2.0, Only device mode */
++&usb_host0_xhci {
++	dr_mode = "peripheral";
++	extcon = <&usb2phy0>;
++	maximum-speed = "high-speed";
++	phys = <&usb2phy0_otg>;
++	phy-names = "usb2-phy";
++	status = "okay";
++};
++
++&usb_host1_xhci {
++	status = "okay";
++};
++
++&usb2phy0 {
++	status = "okay";
++};
++
++&usb2phy0_host {
++	phy-supply = <&vcc5v0_sys>;
++	status = "okay";
++};
++
++&usb2phy0_otg {
++	status = "okay";
++};
++
++&vop {
++	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
++	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
++	status = "okay";
++};
++
++&vop_mmu {
++	status = "okay";
++};
++
++&vp0 {
++	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
++		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
++		remote-endpoint = <&hdmi_in_vp0>;
++	};
++};

package/boot/uboot-rockchip/patches/105-2-board-rockchip-add-LinkEase-EasePi-R1.patch

@@ -0,0 +1,123 @@
+From fc0c5ce5cb2fd9dca2cad38996e8535e0bd810ba Mon Sep 17 00:00:00 2001
+From: Liangbin Lian <jjm2473@gmail.com>
+Date: Thu, 13 Nov 2025 14:51:21 +0800
+Subject: [PATCH 2/2] board: rockchip: add LinkEase EasePi R1
+
+LinkEase EasePi R1 [1] is a high-performance mini router.
+
+Specification:
+- Rockchip RK3568
+- 2GB/4GB LPDDR4 RAM
+- 16GB on-board eMMC
+- 1x M.2 key for 2280 NVMe (PCIe 3.0)
+- 1x USB 3.0 Type-A
+- 1x USB 2.0 Type-C (for USB flashing)
+- 2x 1000 Base-T (native, RTL8211F)
+- 2x 2500 Base-T (PCIe, RTL8125B)
+- 1x HDMI 2.0 Output
+- 12v DC Jack
+- 1x Power key connected to PMIC
+- 2x LEDs (one static power supplied, one GPIO controlled)
+
+[1] https://doc.linkease.com/zh/guide/easepi-r1/hardware.html
+
+Signed-off-by: Liangbin Lian <jjm2473@gmail.com>
+---
+ arch/arm/dts/rk3568-easepi-r1-u-boot.dtsi |  3 +
+ configs/easepi-r1-rk3568_defconfig        | 83 +++++++++++++++++++++++
+ 2 files changed, 86 insertions(+)
+ create mode 100644 arch/arm/dts/rk3568-easepi-r1-u-boot.dtsi
+ create mode 100644 configs/easepi-r1-rk3568_defconfig
+
+--- /dev/null
++++ b/arch/arm/dts/rk3568-easepi-r1-u-boot.dtsi
+@@ -0,0 +1,3 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++
++#include "rk356x-u-boot.dtsi"
+--- /dev/null
++++ b/configs/easepi-r1-rk3568_defconfig
+@@ -0,0 +1,83 @@
++CONFIG_ARM=y
++CONFIG_SKIP_LOWLEVEL_INIT=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_COUNTER_FREQUENCY=24000000
++CONFIG_ARCH_ROCKCHIP=y
++CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3568-easepi-r1"
++CONFIG_ROCKCHIP_RK3568=y
++CONFIG_SPL_SERIAL=y
++CONFIG_SYS_LOAD_ADDR=0xc00800
++CONFIG_DEBUG_UART_BASE=0xFE660000
++CONFIG_DEBUG_UART_CLOCK=24000000
++CONFIG_PCI=y
++CONFIG_DEBUG_UART=y
++CONFIG_FIT=y
++CONFIG_FIT_VERBOSE=y
++CONFIG_SPL_FIT_SIGNATURE=y
++CONFIG_SPL_LOAD_FIT=y
++CONFIG_LEGACY_IMAGE_FORMAT=y
++CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-easepi-r1.dtb"
++# CONFIG_DISPLAY_CPUINFO is not set
++CONFIG_DISPLAY_BOARDINFO_LATE=y
++CONFIG_SPL_MAX_SIZE=0x40000
++# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
++CONFIG_SPL_ATF=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_I2C=y
++CONFIG_CMD_MMC=y
++CONFIG_CMD_PCI=y
++CONFIG_CMD_USB=y
++CONFIG_CMD_ROCKUSB=y
++CONFIG_CMD_USB_MASS_STORAGE=y
++CONFIG_CMD_PMIC=y
++CONFIG_CMD_REGULATOR=y
++# CONFIG_SPL_DOS_PARTITION is not set
++CONFIG_SPL_OF_CONTROL=y
++CONFIG_OF_LIVE=y
++CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
++CONFIG_SPL_DM_SEQ_ALIAS=y
++CONFIG_SPL_REGMAP=y
++CONFIG_SPL_SYSCON=y
++CONFIG_SPL_CLK=y
++# CONFIG_USB_FUNCTION_FASTBOOT is not set
++CONFIG_ROCKCHIP_GPIO=y
++CONFIG_SYS_I2C_ROCKCHIP=y
++CONFIG_MISC=y
++CONFIG_SUPPORT_EMMC_RPMB=y
++CONFIG_MMC_DW=y
++CONFIG_MMC_DW_ROCKCHIP=y
++CONFIG_MMC_SDHCI=y
++CONFIG_MMC_SDHCI_SDMA=y
++CONFIG_MMC_SDHCI_ROCKCHIP=y
++CONFIG_PHY_REALTEK=y
++CONFIG_DWC_ETH_QOS=y
++CONFIG_DWC_ETH_QOS_ROCKCHIP=y
++CONFIG_RTL8169=y
++CONFIG_NVME_PCI=y
++CONFIG_PCIE_DW_ROCKCHIP=y
++CONFIG_PHY_ROCKCHIP_INNO_USB2=y
++CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
++CONFIG_SPL_PINCTRL=y
++CONFIG_DM_PMIC=y
++CONFIG_PMIC_RK8XX=y
++CONFIG_REGULATOR_RK8XX=y
++CONFIG_PWM_ROCKCHIP=y
++CONFIG_SPL_RAM=y
++CONFIG_BAUDRATE=1500000
++CONFIG_DEBUG_UART_SHIFT=2
++CONFIG_SYS_NS16550_MEM32=y
++CONFIG_SYSRESET=y
++CONFIG_USB=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_EHCI_GENERIC=y
++CONFIG_USB_OHCI_HCD=y
++CONFIG_USB_OHCI_GENERIC=y
++CONFIG_USB_DWC3=y
++CONFIG_USB_DWC3_GENERIC=y
++CONFIG_SPL_USB_DWC3_GENERIC=y
++CONFIG_USB_GADGET=y
++CONFIG_USB_GADGET_DOWNLOAD=y
++CONFIG_USB_FUNCTION_ROCKUSB=y
++CONFIG_ERRNO_STR=y

package/boot/uboot-rockchip/patches/107-board-rockchip-add-HINLINK-H28K.patch

@@ -0,0 +1,378 @@
+From df056584b1825957ad118b6c1084aae00b1fa0b7 Mon Sep 17 00:00:00 2001
+From: Chukun Pan <amadeus@jmu.edu.cn>
+Date: Wed, 3 Dec 2025 20:03:22 +0800
+Subject: [PATCH] board: rockchip: add HINLINK H28K
+
+The HINLINK H28K is a single board computer based on the
+RK3528 SoC. Add support for the HINLINK H28K board.
+
+Features tested on HINLINK H28K:
+- SD-card boot
+- eMMC boot
+- Ethernet
+
+Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
+---
+
+--- /dev/null
++++ b/arch/arm/dts/rk3528-hinlink-h28k-u-boot.dtsi
+@@ -0,0 +1,11 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++
++#include "rk3528-u-boot.dtsi"
++
++&vdd_arm {
++	regulator-init-microvolt = <953000>;
++};
++
++&vdd_logic {
++	regulator-init-microvolt = <900000>;
++};
+--- /dev/null
++++ b/configs/hinlink-h28k-rk3528_defconfig
+@@ -0,0 +1,64 @@
++CONFIG_ARM=y
++CONFIG_SKIP_LOWLEVEL_INIT=y
++CONFIG_COUNTER_FREQUENCY=24000000
++CONFIG_ARCH_ROCKCHIP=y
++CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3528-hinlink-h28k"
++CONFIG_ROCKCHIP_RK3528=y
++CONFIG_SYS_LOAD_ADDR=0xc00800
++CONFIG_DEBUG_UART_BASE=0xFF9F0000
++CONFIG_DEBUG_UART_CLOCK=24000000
++CONFIG_DEBUG_UART=y
++CONFIG_DEFAULT_FDT_FILE="rockchip/rk3528-hinlink-h28k.dtb"
++# CONFIG_DISPLAY_CPUINFO is not set
++CONFIG_BOARD_RNG_SEED=y
++CONFIG_SPL_MAX_SIZE=0x40000
++# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
++CONFIG_CMD_MEMINFO=y
++CONFIG_CMD_MEMINFO_MAP=y
++CONFIG_CMD_ADC=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_MISC=y
++CONFIG_CMD_MMC=y
++CONFIG_CMD_USB=y
++CONFIG_CMD_ROCKUSB=y
++CONFIG_CMD_USB_MASS_STORAGE=y
++# CONFIG_CMD_SETEXPR is not set
++CONFIG_CMD_RNG=y
++CONFIG_CMD_REGULATOR=y
++# CONFIG_SPL_DOS_PARTITION is not set
++CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
++CONFIG_BUTTON=y
++CONFIG_BUTTON_ADC=y
++# CONFIG_USB_FUNCTION_FASTBOOT is not set
++CONFIG_ROCKCHIP_GPIO=y
++CONFIG_LED=y
++CONFIG_LED_GPIO=y
++CONFIG_SUPPORT_EMMC_RPMB=y
++CONFIG_MMC_DW=y
++CONFIG_MMC_DW_ROCKCHIP=y
++CONFIG_MMC_SDHCI=y
++CONFIG_MMC_SDHCI_SDMA=y
++CONFIG_MMC_SDHCI_ROCKCHIP=y
++CONFIG_PHY_REALTEK=y
++CONFIG_DM_MDIO=y
++CONFIG_DWC_ETH_QOS=y
++CONFIG_DWC_ETH_QOS_ROCKCHIP=y
++CONFIG_PHY_ROCKCHIP_INNO_USB2=y
++CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
++CONFIG_REGULATOR_PWM=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_PWM_ROCKCHIP=y
++CONFIG_BAUDRATE=1500000
++CONFIG_DEBUG_UART_SHIFT=2
++CONFIG_SYS_NS16550_MEM32=y
++CONFIG_USB=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_EHCI_GENERIC=y
++CONFIG_USB_DWC3=y
++CONFIG_USB_DWC3_GENERIC=y
++CONFIG_USB_GADGET=y
++CONFIG_USB_GADGET_DOWNLOAD=y
++CONFIG_USB_FUNCTION_ROCKUSB=y
++CONFIG_ERRNO_STR=y
+--- /dev/null
++++ b/dts/upstream/src/arm64/rockchip/rk3528-hinlink-h28k.dts
+@@ -0,0 +1,278 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++
++/dts-v1/;
++
++#include <dt-bindings/input/input.h>
++#include <dt-bindings/leds/common.h>
++#include <dt-bindings/pwm/pwm.h>
++#include "rk3528.dtsi"
++
++/ {
++	model = "HINLINK H28K";
++	compatible = "hinlink,h28k", "rockchip,rk3528";
++
++	aliases {
++		ethernet0 = &gmac1;
++		mmc0 = &sdhci;
++		mmc1 = &sdmmc;
++		serial0 = &uart0;
++	};
++
++	chosen {
++		stdout-path = "serial0:1500000n8";
++	};
++
++	keys {
++		compatible = "adc-keys";
++		io-channels = <&saradc 0>;
++		io-channel-names = "buttons";
++		keyup-threshold-microvolt = <1800000>;
++		poll-interval = <100>;
++
++		button-boot {
++			label = "BOOT";
++			linux,code = <KEY_SETUP>;
++			press-threshold-microvolt = <0>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++		pinctrl-names = "default";
++		pinctrl-0 = <&lan_led>, <&wan_led>, <&work_led>;
++
++		led-0 {
++			color = <LED_COLOR_ID_AMBER>;
++			function = LED_FUNCTION_LAN;
++			gpios = <&gpio4 RK_PC1 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "netdev";
++		};
++
++		led-1 {
++			color = <LED_COLOR_ID_BLUE>;
++			function = LED_FUNCTION_WAN;
++			gpios = <&gpio4 RK_PC0 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "netdev";
++		};
++
++		led-2 {
++			color = <LED_COLOR_ID_GREEN>;
++			function = LED_FUNCTION_STATUS;
++			gpios = <&gpio4 RK_PB7 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "default-on";
++		};
++	};
++
++	vdd_0v9: regulator-0v9-vdd {
++		compatible = "regulator-fixed";
++		regulator-name = "vdd_0v9";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <900000>;
++		regulator-max-microvolt = <900000>;
++		vin-supply = <&vcc5v0_sys>;
++	};
++
++	vcc_ddr: regulator-1v1-vcc-ddr {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc_ddr";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <1100000>;
++		regulator-max-microvolt = <1100000>;
++		vin-supply = <&vcc5v0_sys>;
++	};
++
++	vcc_1v8: regulator-1v8-vcc {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc_1v8";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <1800000>;
++		regulator-max-microvolt = <1800000>;
++		vin-supply = <&vcc_3v3>;
++	};
++
++	vcc_3v3: regulator-3v3-vcc {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc_3v3";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		vin-supply = <&vcc5v0_sys>;
++	};
++
++	vcc3v3_sd: regulator-3v3-vcc-sd {
++		compatible = "regulator-fixed";
++		gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&sdmmc_pwren_l>;
++		regulator-name = "vcc3v3_sd";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		vin-supply = <&vcc_3v3>;
++	};
++
++	vcc5v0_sys: regulator-5v0-vcc-sys {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc5v0_sys";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++	};
++
++	vccio_sd: regulator-vccio-sd {
++		compatible = "regulator-gpio";
++		gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&sdmmc_vol_ctrl_h>;
++		regulator-name = "vccio_sd";
++		regulator-min-microvolt = <1800000>;
++		regulator-max-microvolt = <3300000>;
++		states = <1800000 0x0>, <3300000 0x1>;
++		vin-supply = <&vcc5v0_sys>;
++	};
++
++	vdd_arm: regulator-vdd-arm {
++		compatible = "pwm-regulator";
++		pwms = <&pwm1 0 5000 PWM_POLARITY_INVERTED>;
++		pwm-supply = <&vcc5v0_sys>;
++		regulator-name = "vdd_arm";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <746000>;
++		regulator-max-microvolt = <1201000>;
++		regulator-settling-time-up-us = <250>;
++	};
++
++	vdd_logic: regulator-vdd-logic {
++		compatible = "pwm-regulator";
++		pwms = <&pwm2 0 5000 PWM_POLARITY_INVERTED>;
++		pwm-supply = <&vcc5v0_sys>;
++		regulator-name = "vdd_logic";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <705000>;
++		regulator-max-microvolt = <1006000>;
++		regulator-settling-time-up-us = <250>;
++	};
++};
++
++&cpu0 {
++	cpu-supply = <&vdd_arm>;
++};
++
++&cpu1 {
++	cpu-supply = <&vdd_arm>;
++};
++
++&cpu2 {
++	cpu-supply = <&vdd_arm>;
++};
++
++&cpu3 {
++	cpu-supply = <&vdd_arm>;
++};
++
++&gmac1 {
++	clock_in_out = "output";
++	phy-handle = <&rgmii_phy>;
++	phy-mode = "rgmii-id";
++	phy-supply = <&vcc_3v3>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&rgmii_miim>,
++		    <&rgmii_tx_bus2>,
++		    <&rgmii_rx_bus2>,
++		    <&rgmii_rgmii_clk>,
++		    <&rgmii_rgmii_bus>;
++	status = "okay";
++};
++
++&mdio1 {
++	rgmii_phy: ethernet-phy@1 {
++		compatible = "ethernet-phy-ieee802.3-c22";
++		reg = <0x1>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&gmac1_rstn_l>;
++		reset-assert-us = <20000>;
++		reset-deassert-us = <100000>;
++		reset-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
++	};
++};
++
++&pinctrl {
++	gmac {
++		gmac1_rstn_l: gmac1-rstn-l {
++			rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	leds {
++		lan_led: lan-led {
++			rockchip,pins = <4 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		wan_led: wan-led {
++			rockchip,pins = <4 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		work_led: work-led {
++			rockchip,pins = <4 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	sdmmc {
++		sdmmc_pwren_l: sdmmc-pwren-l {
++			rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		sdmmc_vol_ctrl_h: sdmmc-vol-ctrl-h {
++			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++};
++
++&pwm1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pwm1m0_pins>;
++	status = "okay";
++};
++
++&pwm2 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pwm2m0_pins>;
++	status = "okay";
++};
++
++&saradc {
++	vref-supply = <&vcc_1v8>;
++	status = "okay";
++};
++
++&sdhci {
++	bus-width = <8>;
++	cap-mmc-highspeed;
++	mmc-hs200-1_8v;
++	non-removable;
++	vmmc-supply = <&vcc_3v3>;
++	vqmmc-supply = <&vcc_1v8>;
++	status = "okay";
++};
++
++&sdmmc {
++	bus-width = <4>;
++	cap-sd-highspeed;
++	disable-wp;
++	sd-uhs-sdr104;
++	vmmc-supply = <&vcc3v3_sd>;
++	vqmmc-supply = <&vccio_sd>;
++	status = "okay";
++};
++
++&uart0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart0m0_xfer>;
++	status = "okay";
++};

package/boot/uboot-stm32/Makefile

@@ -7,10 +7,10 @@
 
 include $(TOPDIR)/rules.mk
 
-PKG_VERSION:=2025.07
+PKG_VERSION:=2025.10
 PKG_RELEASE:=1
 
-PKG_HASH:=0f933f6c5a426895bf306e93e6ac53c60870e4b54cda56d95211bec99e63bec7
+PKG_HASH:=b4f032848e56cc8f213ad59f9132c084dbbb632bc29176d024e58220e0efdf4a
 PKG_MAINTAINER:=Thomas Richard <thomas.richard@bootlin.com>
 
 UBOOT_USE_INTREE_DTC:=1

package/boot/uboot-stm32/patches/001-configs-stm32mp13-increase-SYS_MALLOC_F_LEN-to-0x210.patch

@@ -1,27 +0,0 @@
-From 1cdb64ad3aa9d6cd4a02adc09fcc1015f90e2fb9 Mon Sep 17 00:00:00 2001
-From: Patrice Chotard <patrice.chotard@foss.st.com>
-Date: Mon, 9 Jun 2025 14:53:13 +0200
-Subject: [PATCH] configs: stm32mp13: increase SYS_MALLOC_F_LEN to 0x210000
-
-Due SCMI update to protocol v2.0, we need to increase
-SYS_MALLOC_F_LEN value to avoid following message:
-alloc space exhausted ptr 200040 limit 200000
-
-Set SYS_MALLOC_F_LEN to 0x210000 to fix this issue.
-
-Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
----
- configs/stm32mp13_defconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/configs/stm32mp13_defconfig
-+++ b/configs/stm32mp13_defconfig
-@@ -1,7 +1,7 @@
- CONFIG_ARM=y
- CONFIG_ARCH_STM32MP=y
- CONFIG_TFABOOT=y
--CONFIG_SYS_MALLOC_F_LEN=0x180000
-+CONFIG_SYS_MALLOC_F_LEN=0x210000
- CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0400000
- CONFIG_ENV_OFFSET=0x900000
- CONFIG_DEFAULT_DEVICE_TREE="st/stm32mp135f-dk"

package/boot/uboot-sunxi/Makefile

@@ -137,14 +137,14 @@ endef
 define U-Boot/OLIMEX_A13_SOM
   BUILD_SUBTARGET:=cortexa8
   NAME:=Olimex A13 SOM
-  BUILD_DEVICES:=olimex_a13-olimex-som
+  BUILD_DEVICES:=olimex_a13-olinuxino
 endef
 
 define U-Boot/licheepi_nano
   BUILD_SUBTARGET:=arm926ejs
   NAME:=LicheePi Nano
   UENV:=f1c
-  BUILD_DEVICES:=licheepi-nano
+  BUILD_DEVICES:=licheepi_licheepi-nano
 endef
 
 define U-Boot/Linksprite_pcDuino
@@ -268,7 +268,7 @@ define U-Boot/popstick
   BUILD_SUBTARGET:=arm926ejs
   NAME:=PopStick
   UENV:=f1c
-  BUILD_DEVICES:=popstick-v1.1
+  BUILD_DEVICES:=sourceparts_popstick-v1.1
 endef
 
 define U-Boot/libretech_all_h3_cc_h5
@@ -319,13 +319,13 @@ endef
 define U-Boot/bananapi_m2_plus_h3
   BUILD_SUBTARGET:=cortexa7
   NAME:=Bananapi M2 Plus H3
-  BUILD_DEVICES:=sinovoip_bananapi-m2-plus
+  BUILD_DEVICES:=sinovoip_bpi-m2-plus
 endef
 
 define U-Boot/Sinovoip_BPI_M3
   BUILD_SUBTARGET:=cortexa7
   NAME:=Bananapi M3
-  BUILD_DEVICES:=sinovoip_bananapi-m3
+  BUILD_DEVICES:=sinovoip_bpi-m3
 endef
 
 define U-Boot/sopine_baseboard
@@ -385,19 +385,19 @@ endef
 define U-Boot/Bananapi_M2_Ultra
   BUILD_SUBTARGET:=cortexa7
   NAME:=Bananapi M2 Ultra
-  BUILD_DEVICES:=sinovoip_bananapi-m2-ultra
+  BUILD_DEVICES:=sinovoip_bpi-m2-ultra
 endef
 
 define U-Boot/bananapi_m2_berry
   BUILD_SUBTARGET:=cortexa7
   NAME:=Bananapi M2 Berry
-  BUILD_DEVICES:=sinovoip_bananapi-m2-berry
+  BUILD_DEVICES:=sinovoip_bpi-m2-berry
 endef
 
 define U-Boot/bananapi_p2_zero
   BUILD_SUBTARGET:=cortexa7
   NAME:=Bananapi P2 Zero
-  BUILD_DEVICES:=sinovoip_bananapi-p2-zero
+  BUILD_DEVICES:=sinovoip_bpi-p2-zero
 endef
 
 

package/boot/uboot-tools/uboot-envtools/files/ipq40xx

@@ -11,25 +11,6 @@ touch /etc/config/ubootenv
 
 board=$(board_name)
 
-ubootenv_mtdinfo () {
-	UBOOTENV_PART=$(cat /proc/mtd | grep APPSBLENV)
-	mtd_dev=$(echo $UBOOTENV_PART | awk '{print $1}' | sed 's/:$//')
-	mtd_size=$(echo $UBOOTENV_PART | awk '{print "0x"$2}')
-	mtd_erase=$(echo $UBOOTENV_PART | awk '{print "0x"$3}')
-	nor_flash=$(find /sys/bus/spi/devices/*/mtd -name ${mtd_dev})
-
-	if [ -n "$nor_flash" ]; then
-		ubootenv_size=$mtd_size
-	else
-		# size is fixed to 0x40000 in u-boot
-		ubootenv_size=0x40000
-	fi
-
-	sectors=$(( $ubootenv_size / $mtd_erase ))
-	sectors=$(printf "0x%x" $sectors )
-	echo /dev/$mtd_dev 0x0 $ubootenv_size $mtd_erase $sectors
-}
-
 case "$board" in
 alfa-network,ap120c-ac|\
 devolo,magic-2-wifi-next|\

package/boot/uboot-tools/uboot-envtools/files/kirkwood

@@ -16,6 +16,7 @@ checkpoint,l-50|\
 cloudengines,pogoe02|\
 cloudengines,pogoplugv4|\
 dlink,dns320l|\
+dlink,dns-325-a1\
 globalscale,sheevaplug|\
 iom,ix2-200|\
 iom,ix4-200d|\

package/boot/uboot-tools/uboot-envtools/files/lantiq

@@ -12,15 +12,13 @@ touch /etc/config/ubootenv
 board=$(board_name)
 
 case "$board" in
-bt,homehub-v2b)
+bt,homehub-v2b|\
+siemens,gigaset-sx76x)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000" "1"
 	;;
 bt,homehub-v3a)
 	ubootenv_add_uci_config "/dev/mtd2" "0x0" "0x4000" "0x4000" "1"
 	;;
-siemens,gigaset-sx76x)
-	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000" "1"
-	;;
 zyxel,p-2812hnu-f1)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x2000" "0x20000" "1"
 	;;

package/boot/uboot-tools/uboot-envtools/files/mediatek_filogic

@@ -28,16 +28,22 @@ asus,zenwifi-bt8-ubootmod|\
 cmcc,a10-ubootmod|\
 comfast,cf-wr632ax-ubootmod|\
 cudy,tr3000-v1-ubootmod|\
+cudy,wbr3000uax-v1-ubootmod|\
 h3c,magic-nx30-pro|\
+imou,hx21|\
 jcg,q30-pro|\
 konka,komi-a31|\
 mercusys,mr90x-v1-ubi|\
 netcore,n60|\
 netcore,n60-pro|\
+netis,nx30v2|\
 netis,nx31|\
+netis,nx32u|\
 nokia,ea0326gmp|\
+openwrt,one|\
 qihoo,360t7|\
 routerich,ax3000-ubootmod|\
+routerich,be7200|\
 snr,snr-cpe-ax2|\
 tplink,tl-xdr4288|\
 tplink,tl-xdr6086|\
@@ -53,6 +59,7 @@ acer,predator-w6|\
 acer,predator-w6d|\
 acer,vero-w6m|\
 glinet,gl-mt2500|\
+glinet,gl-mt2500-airoha|\
 glinet,gl-mt6000|\
 glinet,gl-x3000|\
 glinet,gl-xe3000|\
@@ -60,6 +67,15 @@ huasifei,wh3000|\
 nradio,c8-668gl)
 	ubootenv_add_mmc "u-boot-env" "" "0x0" "0x80000"
 	;;
+asiarf,ap7986-003|\
+cetron,ct3003|\
+comfast,cf-wr632ax|\
+edgecore,eap111|\
+netgear,wax220|\
+zbtlink,zbt-z8102ax|\
+zbtlink,zbt-z8103ax)
+	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
+	;;
 asus,rt-ax59u)
 	ubootenv_add_uci_config "/dev/mtd0" "0x100000" "0x20000" "0x20000"
 	;;
@@ -87,6 +103,7 @@ jdcloud,re-cp-03)
 	;;
 buffalo,wsr-6000ax8|\
 mercusys,mr80x-v3|\
+mercusys,mr85x|\
 mercusys,mr90x-v1|\
 routerich,ax3000|\
 routerich,ax3000-v1|\
@@ -98,15 +115,6 @@ comfast,cf-e393ax|\
 iptime,ax3000m)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x80000"
 	;;
-asiarf,ap7986-003|\
-cetron,ct3003|\
-comfast,cf-wr632ax|\
-edgecore,eap111|\
-netgear,wax220|\
-zbtlink,zbt-z8102ax|\
-zbtlink,zbt-z8103ax)
-	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
-	;;
 dlink,aquila-pro-ai-m30-a1|\
 dlink,aquila-pro-ai-m60-a1)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x40000"
@@ -121,24 +129,22 @@ openembed,som7981)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x80000"
 	ubootenv_add_uci_sys_config "/dev/mtd3" "0x0" "0x100000" "0x100000"
 	;;
-openwrt,one)
-	ubootenv_add_ubi_default
-	;;
 smartrg,sdg-8733|\
 smartrg,sdg-8733a|\
 smartrg,sdg-8734)
 	ubootenv_add_mmc "u-boot-env" "mmcblk0" "0x0" "0x8000" "0x8000"
 	;;
+teltonika,rutc50)
+	ubootenv_add_mtd "u-boot-env" "0x0" "0x10000" "0x10000"
+	;;
 tplink,archer-ax80-v1|\
+tplink,archer-ax80-v1-eu|\
 tplink,be450)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000" "8"
 	;;
 ubnt,unifi-6-plus)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x10000"
 	;;
-teltonika,rutc50)
-	ubootenv_add_mtd "u-boot-env" "0x0" "0x10000" "0x10000"
-	;;
 xiaomi,mi-router-ax3000t|\
 xiaomi,mi-router-wr30u-stock|\
 xiaomi,redmi-router-ax6000-stock)