mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2025-12-07 05:04:00 -05:00
mediatek: filogic: add support for ASUS TUF-AX4200Q
ASUS TUF-AX4200Q(TUF 小旋风Pro WiFi6 AX4200) is a home router that adds an additional 2.5G Ethernet port to ASUS TUF-AX4200.
Hardware
- - - - - - - -
- SOC : MediaTek MT7986
- RAM : 512MB DDR3
- FLASH : 256MB SPI-NAND (Winbond W25N02KV)
- WIFI : Mediatek MT7986 DBDC 802.11ax 2.4/5 GHz
- ETH : MediaTek MT7531 Switch
MaxLinear GPY211C 2.5 N-Base-T PHY (WAN)
MaxLinear GPY211C 2.5 N-Base-T PHY (LAN)
- UART : 3V3 115200 8N1 (Pinout silkscreened / Do not ocnnect VCC)
Installation
- - - - - - - -
Vendor-UI Method:
1. Download or make the OpenWrt initramfs.trx image
2. Connect the PC via LAN to one of the yellow router ports and wait until your PC to get a DHCP lease.
3. Browse to http://192.168.50.1/
4. If your router is brand new, finish the setup process and log into the Web-UI.
5. Navigate to Administration -> Firmware Upgrade and upload the downloaded OpenWrt image.
6. Wait for OpenWrt to boot. Transfer the sysupgrade image to the device using SCP and install using sysupgrade.
$ sysupgrade -n <path-to-sysupgrade.bin>
TFTP Method:
1. Download the OpenWrt initramfs image.
Copy the image to a TFTP server reachable at 192.168.1.70/24.
Rename the image to tufax4200q.bin.
2. Connect the PC with TFTP server to the TUF-AX4200Q.
Set a static ip on the ethernet interface of your PC.
(IP address: 192.168.1.70, subnet mask: 255.255.255.0)
Connect to the serial console,
interrupt the autoboot process by pressing '4' when prompted.
3. Download & Boot the OpenWrt initramfs image.
$ setenv ipaddr 192.168.1.1
$ setenv serverip 192.168.1.70
$ tftpboot 0x46000000 tufax4200q.bin
$ bootm 0x46000000
4. Wait for OpenWrt to boot.
Transfer the sysupgrade image to the device using SCP and install using sysupgrade.
$ sysupgrade -n <path-to-sysupgrade.bin>
(based on support for ASUS RT-AX52 by achterin and trx image generation by remittor)
Signed-off-by: Brian Lee <larte332@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20900
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Brian Lee
Hauke Mehrtens
parent
95bd7a76a1
commit
e7086d7a2f
435
target/linux/mediatek/dts/mt7986a-asus-tuf-ax4200q.dts
Normal file
435
target/linux/mediatek/dts/mt7986a-asus-tuf-ax4200q.dts
Normal file
@ -0,0 +1,435 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/mt65xx.h>
|
||||
|
||||
#include "mt7986a.dtsi"
|
||||
|
||||
/ {
|
||||
model = "ASUS TUF-AX4200Q";
|
||||
compatible = "asus,tuf-ax4200q", "mediatek,mt7986a";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
label-mac-device = &gmac0;
|
||||
led-boot = &led_system;
|
||||
led-failsafe = &led_system;
|
||||
led-running = &led_system;
|
||||
led-upgrade = &led_system;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
bootargs-override = "";
|
||||
};
|
||||
|
||||
memory@40000000 {
|
||||
reg = <0 0x40000000 0 0x20000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
mesh {
|
||||
label = "wps";
|
||||
gpios = <&pio 10 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
wlan {
|
||||
function = LED_FUNCTION_WLAN;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
|
||||
led_system: system {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
gpios = <&pio 11 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan-red {
|
||||
function = LED_FUNCTION_WAN;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&pio 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_5v: regulator-5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-5V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&crypto {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
|
||||
gmac0: mac@0 {
|
||||
/* LAN */
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <0>;
|
||||
nvmem-cells = <&macaddr_factory_4>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
|
||||
mac@1 {
|
||||
/* WAN */
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
phy-mode = "2500base-x";
|
||||
phy-handle = <&phy6>;
|
||||
};
|
||||
|
||||
mdio-bus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
|
||||
reset-delay-us = <50000>;
|
||||
reset-post-delay-us = <20000>;
|
||||
|
||||
phy5: phy@5 {
|
||||
compatible = "ethernet-phy-ieee802.3-c45";
|
||||
reg = <5>;
|
||||
|
||||
leds {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
led@0 {
|
||||
reg = <0>;
|
||||
active-high;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
function = LED_FUNCTION_LAN;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
phy6: phy@6 {
|
||||
compatible = "ethernet-phy-ieee802.3-c45";
|
||||
reg = <6>;
|
||||
|
||||
leds {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
led@0 {
|
||||
reg = <0>;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
function = LED_FUNCTION_WAN;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
switch@1f {
|
||||
compatible = "mediatek,mt7531";
|
||||
reg = <31>;
|
||||
reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan1";
|
||||
phy-handle = <&swphy1>;
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan2";
|
||||
phy-handle = <&swphy2>;
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "lan3";
|
||||
phy-handle = <&swphy3>;
|
||||
};
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
label = "lan4";
|
||||
phy-handle = <&swphy4>;
|
||||
};
|
||||
|
||||
port@5 {
|
||||
reg = <5>;
|
||||
label = "lan5";
|
||||
phy-mode = "2500base-x";
|
||||
phy-handle = <&phy5>;
|
||||
};
|
||||
|
||||
port@6 {
|
||||
reg = <6>;
|
||||
label = "cpu";
|
||||
ethernet = <&gmac0>;
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
swphy1: phy@1 {
|
||||
reg = <1>;
|
||||
|
||||
mediatek,led-config = <
|
||||
0x21 0x8009 /* BASIC_CTRL */
|
||||
0x22 0x0c00 /* ON_DURATION */
|
||||
0x23 0x1400 /* BLINK_DURATION */
|
||||
0x24 0x8000 /* LED0_ON_CTRL */
|
||||
0x25 0x0000 /* LED0_BLINK_CTRL */
|
||||
0x26 0xc007 /* LED1_ON_CTRL */
|
||||
0x27 0x003f /* LED1_BLINK_CTRL */
|
||||
>;
|
||||
};
|
||||
|
||||
swphy2: phy@2 {
|
||||
reg = <2>;
|
||||
|
||||
mediatek,led-config = <
|
||||
0x21 0x8009 /* BASIC_CTRL */
|
||||
0x22 0x0c00 /* ON_DURATION */
|
||||
0x23 0x1400 /* BLINK_DURATION */
|
||||
0x24 0x8000 /* LED0_ON_CTRL */
|
||||
0x25 0x0000 /* LED0_BLINK_CTRL */
|
||||
0x26 0xc007 /* LED1_ON_CTRL */
|
||||
0x27 0x003f /* LED1_BLINK_CTRL */
|
||||
>;
|
||||
};
|
||||
|
||||
swphy3: phy@3 {
|
||||
reg = <3>;
|
||||
|
||||
mediatek,led-config = <
|
||||
0x21 0x8009 /* BASIC_CTRL */
|
||||
0x22 0x0c00 /* ON_DURATION */
|
||||
0x23 0x1400 /* BLINK_DURATION */
|
||||
0x24 0x8000 /* LED0_ON_CTRL */
|
||||
0x25 0x0000 /* LED0_BLINK_CTRL */
|
||||
0x26 0xc007 /* LED1_ON_CTRL */
|
||||
0x27 0x003f /* LED1_BLINK_CTRL */
|
||||
>;
|
||||
};
|
||||
|
||||
swphy4: phy@4 {
|
||||
reg = <4>;
|
||||
|
||||
mediatek,led-config = <
|
||||
0x21 0x8009 /* BASIC_CTRL */
|
||||
0x22 0x0c00 /* ON_DURATION */
|
||||
0x23 0x1400 /* BLINK_DURATION */
|
||||
0x24 0x8000 /* LED0_ON_CTRL */
|
||||
0x25 0x0000 /* LED0_BLINK_CTRL */
|
||||
0x26 0xc007 /* LED1_ON_CTRL */
|
||||
0x27 0x003f /* LED1_BLINK_CTRL */
|
||||
>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pio {
|
||||
spi_flash_pins: spi-flash-pins-33-to-38 {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spi0", "spi0_wp_hold";
|
||||
};
|
||||
conf-pu {
|
||||
pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
bias-disable; /* bias-disable */
|
||||
};
|
||||
conf-pd {
|
||||
pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
bias-disable; /* bias-disable */
|
||||
};
|
||||
};
|
||||
|
||||
wf_2g_5g_pins: wf_2g_5g-pins {
|
||||
mux {
|
||||
function = "wifi";
|
||||
groups = "wf_2g", "wf_5g";
|
||||
};
|
||||
conf {
|
||||
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
||||
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
||||
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
||||
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
||||
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
||||
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
||||
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
||||
drive-strength = <MTK_DRIVE_4mA>;
|
||||
};
|
||||
};
|
||||
|
||||
wf_dbdc_pins: wf-dbdc-pins {
|
||||
mux {
|
||||
function = "wifi";
|
||||
groups = "wf_dbdc";
|
||||
};
|
||||
conf {
|
||||
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
||||
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
||||
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
||||
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
||||
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
||||
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
||||
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
||||
drive-strength = <MTK_DRIVE_4mA>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi_flash_pins>;
|
||||
status = "okay";
|
||||
|
||||
spi_nand_flash: flash@0 {
|
||||
compatible = "u-boot-dont-touch-spi-nand";
|
||||
reg = <0>;
|
||||
|
||||
spi-max-frequency = <52000000>;
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
|
||||
/*
|
||||
* ASUS bootloader tries to replace the partitions defined in
|
||||
* Device Tree and by that also deletes all additional properties
|
||||
* needed for UBI and NVMEM-on-UBI.
|
||||
* Prevent this from happening by tricking the loader to delete and
|
||||
* replace a bait node instead (works with older bootloaders).
|
||||
*/
|
||||
partitions: dummy {
|
||||
compatible = "u-boot-dummy-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
reg = <0x0 0x0>;
|
||||
label = "remove_me";
|
||||
};
|
||||
};
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
reg = <0x0 0x400000>;
|
||||
label = "bootloader";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@400000 {
|
||||
compatible = "linux,ubi";
|
||||
reg = <0x400000 0xfc00000>;
|
||||
label = "UBI_DEV";
|
||||
|
||||
volumes {
|
||||
ubi-volume-factory {
|
||||
volname = "Factory";
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eeprom_factory_0: eeprom@0 {
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
|
||||
macaddr_factory_4: macaddr@4 {
|
||||
reg = <0x4 0x6>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wifi {
|
||||
nvmem-cells = <&eeprom_factory_0>;
|
||||
nvmem-cell-names = "eeprom";
|
||||
pinctrl-0 = <&wf_2g_5g_pins>;
|
||||
pinctrl-1 = <&wf_dbdc_pins>;
|
||||
pinctrl-names = "default", "dbdc";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&trng {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssusb {
|
||||
vusb33-supply = <®_3p3v>;
|
||||
vbus-supply = <®_5v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -27,6 +27,7 @@ snr,snr-cpe-ax2)
|
||||
asus,tuf-ax4200)
|
||||
ucidef_set_led_netdev "wan" "WAN" "mdio-bus:06:white:wan" "eth1" "link tx rx"
|
||||
;;
|
||||
asus,tuf-ax4200q|\
|
||||
asus,tuf-ax6000)
|
||||
ucidef_set_led_netdev "lan5" "LAN5" "mdio-bus:05:white:lan" "lan5" "link tx rx"
|
||||
ucidef_set_led_netdev "wan" "WAN" "mdio-bus:06:white:wan" "eth1" "link tx rx"
|
||||
|
||||
@ -74,6 +74,7 @@ mediatek_setup_interfaces()
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" eth1
|
||||
;;
|
||||
asiarf,ap7986-003|\
|
||||
asus,tuf-ax4200q|\
|
||||
asus,tuf-ax6000|\
|
||||
glinet,gl-mt6000|\
|
||||
tplink,tl-xdr4288|\
|
||||
|
||||
@ -45,6 +45,7 @@ case "$board" in
|
||||
;;
|
||||
asus,rt-ax52|\
|
||||
asus,tuf-ax4200|\
|
||||
asus,tuf-ax4200q|\
|
||||
asus,tuf-ax6000)
|
||||
CI_UBIPART="UBI_DEV"
|
||||
addr=$(mtd_get_mac_binary_ubi "Factory" 0x4)
|
||||
|
||||
@ -31,6 +31,7 @@ preinit_set_mac_address() {
|
||||
ip link set dev internet address "$wan_mac"
|
||||
;;
|
||||
asus,tuf-ax4200|\
|
||||
asus,tuf-ax4200q|\
|
||||
asus,tuf-ax6000)
|
||||
CI_UBIPART="UBI_DEV"
|
||||
addr=$(mtd_get_mac_binary_ubi "Factory" 0x4)
|
||||
|
||||
@ -142,6 +142,7 @@ platform_do_upgrade() {
|
||||
asus,rt-ax52|\
|
||||
asus,rt-ax59u|\
|
||||
asus,tuf-ax4200|\
|
||||
asus,tuf-ax4200q|\
|
||||
asus,tuf-ax6000|\
|
||||
asus,zenwifi-bt8)
|
||||
CI_UBIPART="UBI_DEV"
|
||||
@ -365,6 +366,7 @@ platform_pre_upgrade() {
|
||||
asus,rt-ax52|\
|
||||
asus,rt-ax59u|\
|
||||
asus,tuf-ax4200|\
|
||||
asus,tuf-ax4200q|\
|
||||
asus,tuf-ax6000|\
|
||||
asus,zenwifi-bt8)
|
||||
asus_initial_setup
|
||||
|
||||
@ -428,6 +428,28 @@ endif
|
||||
endef
|
||||
TARGET_DEVICES += asus_tuf-ax4200
|
||||
|
||||
define Device/asus_tuf-ax4200q
|
||||
DEVICE_VENDOR := ASUS
|
||||
DEVICE_MODEL := TUF-AX4200Q
|
||||
DEVICE_DTS := mt7986a-asus-tuf-ax4200q
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
|
||||
IMAGES := sysupgrade.bin
|
||||
KERNEL := kernel-bin | lzma | \
|
||||
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
||||
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
||||
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
ifeq ($(IB),)
|
||||
ifeq ($(CONFIG_TARGET_INITRAMFS_FORCE),y)
|
||||
ARTIFACTS := initramfs.trx
|
||||
ARTIFACT/initramfs.trx := append-image-stage initramfs-kernel.bin | \
|
||||
uImage none | asus-trx -v 3 -n TUF-AX4200
|
||||
endif
|
||||
endif
|
||||
endef
|
||||
TARGET_DEVICES += asus_tuf-ax4200q
|
||||
|
||||
define Device/asus_tuf-ax6000
|
||||
DEVICE_VENDOR := ASUS
|
||||
DEVICE_MODEL := TUF-AX6000
|
||||
|
||||
Loading…
Reference in New Issue
Block a user