mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2025-12-06 12:44:00 -05:00
mediatek: filogic: add support for Widelantech WAP430X
This AX3000 flying saucer-shaped device is sold under a few names: - Widelantech WAP430X http://www.widelantech.com/?m=home&c=View&a=index&aid=131 - Felicomm - UeeVii UAP200 (sold on amazon.com) True name, as marked on the PCB and as appears in the DTS, is WAP430X. Hardware: - SoC: Mediatek MT7981B - RAM: 256MiB DDR3 - ROM: 16MiB NOR flash (Winbond 25Q128JVSQ) - Wired: one GbE RJ45 port - Wireless: Mediatek MT7976CN DBDC - Antennas: Internal (two 2.4 GHz 4.5 dBi, three 5 GHz 6 dBi) - GPIO: two blue LEDs (status, WLAN), one button (reset) - Power: DC5521 (12V) or 802.3af PoE (48V 0.3A) - UART: J500 on PCB [3v3] (Rx) (Tx) (Gnd), 115200n Original firmware is GECOOS 8.0_2024081000, a fork of OpenWrt 21.02 created by Widelantech. All ports are closed except 443 (web management interface) and 80 (redirects to 443). UART is locked down, but U-Boot bootloader is friendly. Installation is done via UART (see note below). Method 1: press any key during boot to enter MTK U-Boot bootloader, then choose option 2 (Upgrade firmware) and upload sysupgrade binary via TFTP (or via Xmodem). Method 2: put sysupgrade binary on a webserver (http, not https); after GECOOS loads, choose option 4 (固件在线升级 = online firmware upgrade) in the menu and enter the URL to the sysupgrade binary. Note: GECOOS has a slick web management, and firmware can be uploaded at https://6.6.6.6/#/system/sysupgrade but it's still not clear how to convert the sysupgrade binary to a factory binary accepted by the web interface (WIP). Signed-off-by: Rani Hod <rani.hod@gmail.com> Link: https://github.com/openwrt/openwrt/pull/20402 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Rani Hod
Hauke Mehrtens
parent
e5b86c2320
commit
ff1419f895
169
target/linux/mediatek/dts/mt7981b-widelantech-wap430x.dts
Normal file
169
target/linux/mediatek/dts/mt7981b-widelantech-wap430x.dts
Normal file
@ -0,0 +1,169 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include "mt7981b.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "widelantech,wap430x", "mediatek,mt7981b";
|
||||
model = "Widelantech WAP430X";
|
||||
|
||||
aliases {
|
||||
label-mac-device = &gmac1;
|
||||
led-boot = &led_system;
|
||||
led-failsafe = &led_system;
|
||||
led-running = &led_system;
|
||||
led-upgrade = &led_system;
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
btn-0 {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_system: led-0 {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
gpios = <&pio 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-1 {
|
||||
function = LED_FUNCTION_WLAN;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
gpios = <&pio 35 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
};
|
||||
|
||||
memory@40000000 {
|
||||
device_type = "memory";
|
||||
reg = <0 0x40000000 0 0x10000000>;
|
||||
};
|
||||
};
|
||||
|
||||
ð {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
gmac1: mac@1 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
phy-mode = "gmii";
|
||||
phy-handle = <&int_gbe_phy>;
|
||||
|
||||
nvmem-cell-names = "mac-address";
|
||||
nvmem-cells = <&macaddr_factory_24>;
|
||||
};
|
||||
};
|
||||
|
||||
&pio {
|
||||
spi2_flash_pins: spi2-pins {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spi2", "spi2_wp_hold";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2_flash_pins>;
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
|
||||
spi-max-frequency = <52000000>;
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "BL2";
|
||||
reg = <0x00000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
label = "Factory";
|
||||
reg = <0x50000 0xb0000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eeprom_factory: eeprom@0 {
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
|
||||
// LAN MAC address
|
||||
macaddr_factory_24: macaddr@24 {
|
||||
reg = <0x24 0x6>;
|
||||
};
|
||||
|
||||
// WAN MAC address (not used)
|
||||
/* macaddr@2a {
|
||||
reg = <0x2a 0x6>;
|
||||
}; */
|
||||
};
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "FIP";
|
||||
reg = <0x100000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
compatible = "denx,fit";
|
||||
label = "firmware";
|
||||
reg = <0x180000 0xe70000>;
|
||||
};
|
||||
|
||||
partition@ff0000 {
|
||||
label = "opt";
|
||||
reg = <0xff0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wifi {
|
||||
status = "okay";
|
||||
nvmem-cells = <&eeprom_factory 0>;
|
||||
nvmem-cell-names = "eeprom";
|
||||
};
|
||||
@ -112,6 +112,7 @@ mediatek_setup_interfaces()
|
||||
openfi,6c|\
|
||||
ubnt,unifi-6-plus|\
|
||||
wavlink,wl-wn573hx3|\
|
||||
widelantech,wap430x|\
|
||||
zyxel,nwa50ax-pro)
|
||||
ucidef_set_interface_lan "eth0"
|
||||
;;
|
||||
|
||||
@ -157,9 +157,10 @@ platform_do_upgrade() {
|
||||
;;
|
||||
cudy,re3000-v1|\
|
||||
cudy,wr3000-v1|\
|
||||
yuncore,ax835|\
|
||||
totolink,x6000r|\
|
||||
wavlink,wl-wn573hx3|\
|
||||
totolink,x6000r)
|
||||
widelantech,wap430x|\
|
||||
yuncore,ax835)
|
||||
default_do_upgrade "$1"
|
||||
;;
|
||||
dlink,aquila-pro-ai-m30-a1|\
|
||||
|
||||
@ -2626,6 +2626,21 @@ define Device/wavlink_wl-wn573hx3
|
||||
endef
|
||||
TARGET_DEVICES += wavlink_wl-wn573hx3
|
||||
|
||||
define Device/widelantech_wap430x
|
||||
DEVICE_VENDOR := Widelantech
|
||||
DEVICE_MODEL := WAP430X
|
||||
DEVICE_ALT1_VENDOR := Widelantech
|
||||
DEVICE_ALT1_MODEL := AX3000AM
|
||||
DEVICE_ALT1_VENDOR := UeeVii
|
||||
DEVICE_ALT1_MODEL := UAP200
|
||||
DEVICE_DTS := mt7981b-widelantech-wap430x
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
||||
IMAGE_SIZE := 14784k
|
||||
SUPPORTED_DEVICES += UAP200 AX3000AM # allow upgrade via GECOOS UART menu
|
||||
endef
|
||||
TARGET_DEVICES += widelantech_wap430x
|
||||
|
||||
define Device/xiaomi_mi-router-ax3000t
|
||||
DEVICE_VENDOR := Xiaomi
|
||||
DEVICE_MODEL := Mi Router AX3000T
|
||||
|
||||
Loading…
Reference in New Issue
Block a user