mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2025-12-06 12:44:00 -05:00
filogic: add support for Netgear EAX17
Hardware -------- SOC: MediaTek MT7981 RAM: 512MB DDR4 FLASH: 128MB SPI-NAND WIFI: Mediatek MT7915 (integrated) 2x2 802.11ax 2.4 / 5 GHz ETH: Mediatek MT7981 internal 1 GbE PHY UART: 3V3 115200 8N1 (Pinout silkscreened / Do not connect VCC) Installation ------------ 1. Download the OpenWrt initramfs image. Copy the image to a TFTP server 2. Connect the TFTP server to the EAX17. Conect to the serial console, interrupt the autoboot process by pressing '0' when prompted. 3. Download & Boot the OpenWrt initramfs image. $ tftpboot openwrt.bin $ bootm 4. Wait for OpenWrt to boot. Transfer the sysupgrade image to the device using scp and install using sysupgrade. $ sysupgrade -n <path-to-sysupgrade.bin> Signed-off-by: Jascha Sundaresan <flizarthanon@gmail.com> Link: https://github.com/openwrt/openwrt/pull/20354 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Jascha Sundaresan
Hauke Mehrtens
parent
1748ce8295
commit
46ab9f3f1c
@ -430,7 +430,7 @@ define Build/initrd_compression
|
||||
$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_ZSTD),.zstd)
|
||||
endef
|
||||
|
||||
define Build/fit
|
||||
define Build/fit-its
|
||||
$(if $(findstring with-rootfs,$(word 3,$(1))), \
|
||||
$(call locked,dd if=$(IMAGE_ROOTFS) of=$(IMAGE_ROOTFS).pagesync bs=4096 conv=sync, \
|
||||
gen-cpio$(if $(TARGET_PER_DEVICE_ROOTFS),.$(ROOTFS_ID/$(DEVICE_NAME)))))
|
||||
@ -452,12 +452,20 @@ define Build/fit
|
||||
$(if $(DEVICE_DTS_OVERLAY),$(foreach dtso,$(DEVICE_DTS_OVERLAY), -O $(dtso):$(KERNEL_BUILD_DIR)/image-$(dtso).dtbo)) \
|
||||
-c $(if $(DEVICE_DTS_CONFIG),$(DEVICE_DTS_CONFIG),"config-1") \
|
||||
-A $(LINUX_KARCH) -v $(LINUX_VERSION)
|
||||
endef
|
||||
|
||||
define Build/fit-image
|
||||
$(call locked,PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage $(if $(findstring external,$(word 3,$(1))),\
|
||||
-E -B 0x1000 $(if $(findstring static,$(word 3,$(1))),-p 0x1000)) -f $@.its $@.new, \
|
||||
gen-cpio$(if $(TARGET_PER_DEVICE_ROOTFS),.$(ROOTFS_ID/$(DEVICE_NAME))))
|
||||
@mv $@.new $@
|
||||
endef
|
||||
|
||||
define Build/fit
|
||||
$(call Build/fit-its,$(1))
|
||||
$(call Build/fit-image,$(1))
|
||||
endef
|
||||
|
||||
define Build/libdeflate-gzip
|
||||
$(STAGING_DIR_HOST)/bin/libdeflate-gzip -f -12 -c $@ $(1) > $@.new
|
||||
@mv $@.new $@
|
||||
|
||||
39
scripts/gen_netgear_rootfs_node.sh
Executable file
39
scripts/gen_netgear_rootfs_node.sh
Executable file
@ -0,0 +1,39 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0-or-later
|
||||
#
|
||||
# Author: Jascha Sundaresan <flizarthanon@gmail.com>
|
||||
#
|
||||
# This helper script generates a top-level 'rootfs' node for inclusion
|
||||
# in a Flattened Image Tree (FIT) source (.its) file. The node includes
|
||||
# the size and SHA1 hash of a given root filesystem image and is used by
|
||||
# certain Netgear devices which expect this metadata at the top level of
|
||||
# the FIT structure.
|
||||
#
|
||||
# The resulting block is written to standard output and can be appended
|
||||
# or inserted into an existing .its file by the OpenWrt build system.
|
||||
# Example:
|
||||
# scripts/gen_netgear_rootfs_node.sh build_dir/.../root.squashfs > node.txt
|
||||
#
|
||||
# See also: scripts/mkits.sh, which generates the main FIT .its source.
|
||||
|
||||
ROOTFS_FILE="$1"
|
||||
ROOTFS_SIZE=$(stat -c %s "${ROOTFS_FILE}")
|
||||
ROOTFS_SHA1=$(
|
||||
sha1sum "${ROOTFS_FILE}" | awk '{ print "<0x" substr($0, 1, 8) \
|
||||
" 0x" substr($0, 9, 8) \
|
||||
" 0x" substr($0, 17, 8) \
|
||||
" 0x" substr($0, 25, 8) \
|
||||
" 0x" substr($0, 33, 8) ">" }'
|
||||
)
|
||||
cat <<EOF | sed 's/^/\t/'
|
||||
rootfs {
|
||||
size = <${ROOTFS_SIZE}>;
|
||||
|
||||
hash-1 {
|
||||
value = ${ROOTFS_SHA1};
|
||||
algo = "sha1";
|
||||
};
|
||||
};
|
||||
|
||||
EOF
|
||||
@ -0,0 +1,62 @@
|
||||
From 06e92afca89075628b12c9b4085b4cc7320081ac Mon Sep 17 00:00:00 2001
|
||||
From: Jascha Sundaresan <flizarthanon@gmail.com>
|
||||
Date: Thu, 23 Oct 2025 03:07:41 +0400
|
||||
Subject: nvmem: layouts: u-boot-env: add optional "env-size" property
|
||||
|
||||
Some devices reserve a larger NVMEM region for the U-Boot environment
|
||||
than the actual environment data length used by U-Boot itself. The CRC32
|
||||
in the U-Boot header is calculated over the smaller data length, causing
|
||||
CRC validation to fail when Linux reads the full partition.
|
||||
|
||||
Allow an optional device tree property "env-size" to specify the
|
||||
environment data size to use for CRC computation.
|
||||
|
||||
v2: add missing $ref line to DT binding
|
||||
|
||||
Signed-off-by: Jascha Sundaresan <flizarthanon@gmail.com>
|
||||
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
|
||||
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
|
||||
---
|
||||
Documentation/devicetree/bindings/nvmem/layouts/u-boot,env.yaml | 7 +++++++
|
||||
drivers/nvmem/layouts/u-boot-env.c | 4 +++-
|
||||
2 files changed, 10 insertions(+), 1 deletion(-)
|
||||
|
||||
--- a/Documentation/devicetree/bindings/nvmem/layouts/u-boot,env.yaml
|
||||
+++ b/Documentation/devicetree/bindings/nvmem/layouts/u-boot,env.yaml
|
||||
@@ -46,6 +46,12 @@ properties:
|
||||
type: object
|
||||
description: Command to use for automatic booting
|
||||
|
||||
+ env-size:
|
||||
+ description:
|
||||
+ Size in bytes of the environment data used by U-Boot for CRC
|
||||
+ calculation. If omitted, the full NVMEM region size is used.
|
||||
+ $ref: /schemas/types.yaml#/definitions/uint32
|
||||
+
|
||||
ethaddr:
|
||||
type: object
|
||||
description: Ethernet interfaces base MAC address.
|
||||
@@ -104,6 +110,7 @@ examples:
|
||||
|
||||
partition-u-boot-env {
|
||||
compatible = "brcm,env";
|
||||
+ env-size = <0x20000>;
|
||||
|
||||
ethaddr {
|
||||
};
|
||||
--- a/drivers/nvmem/layouts/u-boot-env.c
|
||||
+++ b/drivers/nvmem/layouts/u-boot-env.c
|
||||
@@ -99,10 +99,12 @@ int u_boot_env_parse(struct device *dev,
|
||||
uint32_t crc32;
|
||||
uint32_t calc;
|
||||
uint8_t *buf;
|
||||
+ u32 env_size;
|
||||
int bytes;
|
||||
int err;
|
||||
|
||||
- dev_size = nvmem_dev_size(nvmem);
|
||||
+ dev_size = device_property_read_u32(dev, "env-size", &env_size) ?
|
||||
+ nvmem_dev_size(nvmem) : (size_t)env_size;
|
||||
|
||||
buf = kzalloc(dev_size, GFP_KERNEL);
|
||||
if (!buf) {
|
||||
272
target/linux/mediatek/dts/mt7981b-netgear-eax17.dts
Normal file
272
target/linux/mediatek/dts/mt7981b-netgear-eax17.dts
Normal file
@ -0,0 +1,272 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
#include "mt7981b.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Netgear EAX17";
|
||||
compatible = "netgear,eax17", "mediatek,mt7981-spim-snand-rfb";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power_green;
|
||||
led-failsafe = &led_power_red;
|
||||
led-running = &led_power_green;
|
||||
led-upgrade = &led_power_red;
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@40000000 {
|
||||
reg = <0 0x40000000 0 0x20000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power_green: power_green {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_POWER;
|
||||
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power_red: power_red {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_POWER;
|
||||
gpios = <&pio 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_rlink_red: rlink_red {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_LAN;
|
||||
gpios = <&pio 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_rlink_green: rlink_green {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_LAN;
|
||||
gpios = <&pio 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_clink_red: clink_red {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_WAN;
|
||||
gpios = <&pio 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_clink_green: clink_green {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_WAN;
|
||||
gpios = <&pio 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_wps_green: wps_green {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_WPS;
|
||||
gpios = <&pio 5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_lan_speed_fast: lan_speed_fast {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&pio 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_lan_speed_slow: lan_speed_slow {
|
||||
color = <LED_COLOR_ID_YELLOW>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&pio 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
|
||||
gmac0: mac@0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gmac1: mac@1 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
phy-mode = "gmii";
|
||||
phy-handle = <&int_gbe_phy>;
|
||||
|
||||
nvmem-cells = <ðaddr 0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
};
|
||||
|
||||
&crypto {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pio {
|
||||
spi_flash_pins: spi0-pins {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spi0", "spi0_wp_hold";
|
||||
};
|
||||
|
||||
conf-pu {
|
||||
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
|
||||
};
|
||||
|
||||
conf-pd {
|
||||
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi_flash_pins>;
|
||||
status = "okay";
|
||||
|
||||
spi_nand_flash: flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "spi-nand";
|
||||
reg = <0>;
|
||||
|
||||
spi-max-frequency = <52000000>;
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
|
||||
partitions {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fixed-partitions";
|
||||
|
||||
partition@0 {
|
||||
label = "bl2";
|
||||
reg = <0x0 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x0100000 0x0080000>;
|
||||
};
|
||||
|
||||
factory: partition@180000 {
|
||||
label = "factory";
|
||||
reg = <0x180000 0x200000>;
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eeprom_factory_0: eeprom@0 {
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
};
|
||||
|
||||
partition@380000 {
|
||||
label = "fip";
|
||||
reg = <0x380000 0x0200000>;
|
||||
};
|
||||
|
||||
partition@580000 {
|
||||
label = "ubi";
|
||||
reg = <0x580000 0x5000000>;
|
||||
compatible = "linux,ubi";
|
||||
|
||||
volumes {
|
||||
ubi-volume-u-boot-env {
|
||||
volname = "u-boot-env";
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "u-boot,env";
|
||||
env-size = <0x80000>;
|
||||
|
||||
ethaddr: ethaddr {
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@5580000 {
|
||||
label = "facenv";
|
||||
reg = <0x5580000 0x200000>;
|
||||
};
|
||||
|
||||
partition@5780000 {
|
||||
label = "rae";
|
||||
reg = <0x5780000 0x600000>;
|
||||
};
|
||||
|
||||
partition@5D80000 {
|
||||
label = "pot";
|
||||
reg = <0x5D80000 0x020000>;
|
||||
};
|
||||
|
||||
partition@5DA0000 {
|
||||
label = "log";
|
||||
reg = <0x5DA0000 0x040000>;
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&xhci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wifi {
|
||||
status = "okay";
|
||||
nvmem-cells = <&eeprom_factory_0>;
|
||||
nvmem-cell-names = "eeprom";
|
||||
|
||||
band@0 {
|
||||
reg = <0>;
|
||||
nvmem-cells = <ðaddr 2>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
band@1 {
|
||||
reg = <1>;
|
||||
nvmem-cells = <ðaddr 3>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "disabled";
|
||||
};
|
||||
@ -122,6 +122,17 @@ netcore,n60-pro)
|
||||
ucidef_set_led_netdev "wanact" "WANACT" "mdio-bus:06:green:wan" "eth1" "tx rx"
|
||||
ucidef_set_led_netdev "wanlink" "WANLINK" "blue:wan" "eth1" "link"
|
||||
;;
|
||||
netgear,eax17)
|
||||
ucidef_set_led_default power_green "Power (green)" green:power 1
|
||||
ucidef_set_led_default power_red "Power (red)" red:power 0
|
||||
ucidef_set_led_default rlink_red "Client (red)" red:lan 0
|
||||
ucidef_set_led_default clink_red "Router (red)" red:wan 0
|
||||
ucidef_set_led_wps wps_green "WPS (green)" green:wps
|
||||
ucidef_set_led_netdev lan_speed_fast "LAN Link (green)" green:status eth0
|
||||
uci -q set system.lan_speed_fast.mode='link'
|
||||
ucidef_set_led_netdev lan_speed_slow "LAN Activity (yellow)" yellow:status eth0
|
||||
uci -q set system.lan_speed_slow.mode='tx rx'
|
||||
;;
|
||||
netgear,wax220)
|
||||
ucidef_set_led_netdev "eth0" "LAN" "green:lan" "eth0"
|
||||
;;
|
||||
|
||||
@ -106,6 +106,7 @@ mediatek_setup_interfaces()
|
||||
cudy,ap3000outdoor-v1|\
|
||||
cudy,ap3000-v1|\
|
||||
cudy,re3000-v1|\
|
||||
netgear,eax17|\
|
||||
netgear,wax220|\
|
||||
openfi,6c|\
|
||||
ubnt,unifi-6-plus|\
|
||||
|
||||
@ -189,6 +189,17 @@ platform_do_upgrade() {
|
||||
CI_UBIPART="ubi0"
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
netgear,eax17)
|
||||
echo "UPGRADING SECOND SLOT"
|
||||
CI_KERNPART="kernel2"
|
||||
CI_ROOTPART="rootfs2"
|
||||
nand_do_flash_file "$1" || nand_do_upgrade_failed
|
||||
echo "UPGRADING PRIMARY SLOT"
|
||||
CI_KERNPART="kernel"
|
||||
CI_ROOTPART="rootfs"
|
||||
nand_do_flash_file "$1" || nand_do_upgrade_failed
|
||||
nand_do_upgrade_success
|
||||
;;
|
||||
tplink,fr365-v1)
|
||||
CI_UBIPART="ubi"
|
||||
CI_KERNPART="kernel"
|
||||
|
||||
@ -337,8 +337,10 @@ CONFIG_NVMEM_AN8855_EFUSE=y
|
||||
CONFIG_NVMEM_BLOCK=y
|
||||
CONFIG_NVMEM_LAYOUTS=y
|
||||
CONFIG_NVMEM_LAYOUT_ADTRAN=y
|
||||
CONFIG_NVMEM_LAYOUT_U_BOOT_ENV=y
|
||||
CONFIG_NVMEM_MTK_EFUSE=y
|
||||
CONFIG_NVMEM_SYSFS=y
|
||||
CONFIG_NVMEM_U_BOOT_ENV=y
|
||||
CONFIG_OF=y
|
||||
CONFIG_OF_ADDRESS=y
|
||||
CONFIG_OF_DYNAMIC=y
|
||||
|
||||
@ -8,6 +8,15 @@ define Image/Prepare
|
||||
echo -ne '\xde\xad\xc0\xde' > $(KDIR)/ubi_mark
|
||||
endef
|
||||
|
||||
define Build/fit-with-netgear-top-level-rootfs-node
|
||||
$(call Build/fit-its,$(1))
|
||||
$(TOPDIR)/scripts/gen_netgear_rootfs_node.sh $(KERNEL_BUILD_DIR)/root.squashfs > $@.rootfs
|
||||
awk '/configurations/ { system("cat $@.rootfs") } 1' $@.its > $@.its.tmp
|
||||
@mv -f $@.its.tmp $@.its
|
||||
@rm -f $@.rootfs
|
||||
$(call Build/fit-image,$(1))
|
||||
endef
|
||||
|
||||
define Build/mt7981-bl2
|
||||
cat $(STAGING_DIR_IMAGE)/mt7981-$1-bl2.img >> $@
|
||||
endef
|
||||
@ -1981,6 +1990,48 @@ define Device/netcore_n60-pro
|
||||
endef
|
||||
TARGET_DEVICES += netcore_n60-pro
|
||||
|
||||
define Device/netgear_eax17
|
||||
DEVICE_VENDOR := NETGEAR
|
||||
DEVICE_MODEL := EAX17
|
||||
DEVICE_ALT0_VENDOR := NETGEAR
|
||||
DEVICE_ALT0_MODEL := EAX11
|
||||
DEVICE_ALT0_VARIANT := v3
|
||||
DEVICE_ALT1_VENDOR := NETGEAR
|
||||
DEVICE_ALT1_MODEL := EAX15
|
||||
DEVICE_ALT1_VARIANT := v3
|
||||
DEVICE_ALT2_VENDOR := NETGEAR
|
||||
DEVICE_ALT2_MODEL := EAX14
|
||||
DEVICE_ALT2_VARIANT := v3
|
||||
DEVICE_ALT3_VENDOR := NETGEAR
|
||||
DEVICE_ALT3_MODEL := EAX12
|
||||
DEVICE_ALT3_VARIANT := v2
|
||||
DEVICE_ALT4_VENDOR := NETGEAR
|
||||
DEVICE_ALT4_MODEL := EAX16
|
||||
DEVICE_ALT5_VENDOR := NETGEAR
|
||||
DEVICE_ALT5_MODEL := EAX19
|
||||
DEVICE_DTS := mt7981b-netgear-eax17
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb
|
||||
UBINIZE_OPTS := -E 5
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
NETGEAR_ENC_MODEL := EAX17
|
||||
NETGEAR_ENC_REGION := US
|
||||
NETGEAR_ENC_HW_ID_LIST := 1010000013120000_NETGEAR
|
||||
NETGEAR_ENC_MODEL_LIST := EAX17;EAX11v3;EAX15v3;EAX14v3;EAX12v2;EAX16;EAX19
|
||||
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
||||
KERNEL = kernel-bin | lzma | \
|
||||
fit-with-netgear-top-level-rootfs-node lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
||||
KERNEL_IN_UBI := 1
|
||||
IMAGE_SIZE := 81920k
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
IMAGES += factory.img
|
||||
# Padding to 10M seems to be required by OEM web interface
|
||||
IMAGE/factory.img := sysupgrade-tar | \
|
||||
pad-to 10M | check-size | netgear-encrypted-factory
|
||||
endef
|
||||
TARGET_DEVICES += netgear_eax17
|
||||
|
||||
define Device/netgear_wax220
|
||||
DEVICE_VENDOR := NETGEAR
|
||||
DEVICE_MODEL := WAX220
|
||||
|
||||
Loading…
Reference in New Issue
Block a user