OpenWrt v24.10.4: adjust config defaults

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

.github/labeler.yml

@@ -180,6 +180,13 @@
 - changed-files:
   - any-glob-to-any-file:
     - "target/linux/starfive/**"
+"target/stm32":
+- changed-files:
+  - any-glob-to-any-file:
+    - "target/linux/stm32/**"
+    - "package/boot/arm-trusted-firmware-stm32/**"
+    - "package/boot/optee-os-stm32/**"
+    - "package/boot/uboot-stm32/**"
 "target/sunxi":
 - changed-files:
   - any-glob-to-any-file:

config/Config-build.in

@@ -70,7 +70,8 @@ menu "Global build settings"
 
 	config USE_APK
 		imply PACKAGE_apk-mbedtls
-		bool "Use APK instead of OPKG to build distribution (EXPERIMENTAL)"
+		bool "Use APK instead of OPKG to build distribution (BROKEN)"
+		depends on BROKEN
 
 	comment "General build options"
 
@@ -295,12 +296,22 @@ menu "Global build settings"
 		  Enable GCC Stack Smashing Protection (SSP) for userspace applications
 		config PKG_CC_STACKPROTECTOR_NONE
 			bool "None"
+			help
+				No stack smashing protection.
 		config PKG_CC_STACKPROTECTOR_REGULAR
 			bool "Regular"
+			help
+				Protects functions with vulnerable objects.
+				This includes functions with buffers larger than 8 bytes or calls to alloca.
 		config PKG_CC_STACKPROTECTOR_STRONG
 			bool "Strong"
+			help
+				Like Regular, but also protects functions with
+				local arrays or references to local frame addresses.
 		config PKG_CC_STACKPROTECTOR_ALL
 			bool "All"
+			help
+				Protects all functions.
 	endchoice
 
 	choice
@@ -310,10 +321,18 @@ menu "Global build settings"
 		  Enable GCC Stack-Smashing Protection (SSP) for the kernel
 		config KERNEL_CC_STACKPROTECTOR_NONE
 			bool "None"
+			help
+				No stack smashing protection.
 		config KERNEL_CC_STACKPROTECTOR_REGULAR
 			bool "Regular"
+			help
+				Protects functions with vulnerable objects.
+				This includes functions with buffers larger than 8 bytes or calls to alloca.
 		config KERNEL_CC_STACKPROTECTOR_STRONG
 			bool "Strong"
+			help
+				Like Regular, but also protects functions with
+				local arrays or references to local frame addresses.
 	endchoice
 
 	config KERNEL_STACKPROTECTOR
@@ -404,11 +423,11 @@ menu "Global build settings"
 
 	endchoice
 
-	config SECCOMP
+	config USE_SECCOMP
 		bool "Enable SECCOMP"
 		select KERNEL_SECCOMP
 		select PACKAGE_procd-seccomp
-		depends on (aarch64 || arm || armeb || mips || mipsel || mips64 || mips64el || i386 || powerpc || x86_64)
+		depends on (aarch64 || arm || armeb || mips || mipsel || mips64 || mips64el || i386 || loongarch64 || powerpc || x86_64)
 		depends on !TARGET_uml
 		default y
 		help

config/Config-kernel.in

@@ -333,6 +333,25 @@ if KERNEL_TASKSTATS
 
 endif
 
+config KERNEL_PSI
+	bool "Compile the kernel with pressure stall information tracking"
+	help
+	  Collect metrics that indicate how overcommitted the CPU, memory,
+	  and IO capacity are in the system.
+
+	  If you say Y here, the kernel will create /proc/pressure/ with the
+	  pressure statistics files cpu, memory, and io. These will indicate
+	  the share of walltime in which some or all tasks in the system are
+	  delayed due to contention of the respective resource.
+
+	  In kernels with cgroup support, cgroups (cgroup2 only) will
+	  have cpu.pressure, memory.pressure, and io.pressure files,
+	  which aggregate pressure stalls for the grouped tasks only.
+
+	  For more details see Documentation/accounting/psi.rst.
+
+	  Say N if unsure.
+
 config KERNEL_KALLSYMS
 	bool "Compile the kernel with symbol table information"
 	default y if !SMALL_FLASH
@@ -1187,9 +1206,11 @@ endif
 
 config KERNEL_NET_L3_MASTER_DEV
 	bool "L3 Master device support"
+	default y if !SMALL_FLASH
 	help
 	  This module provides glue between core networking code and device
 	  drivers to support L3 master devices like VRF.
+  	  Increases the compressed kernel size by ~4kB (as of Linux 6.6).
 
 config KERNEL_XDP_SOCKETS
 	bool "XDP sockets support"
@@ -1218,6 +1239,13 @@ config KERNEL_MPTCP_IPV6
 	default KERNEL_MPTCP
 endif
 
+config KERNEL_NF_CONNTRACK_TIMEOUT
+	bool "Per-connection connection tracking timeout"
+	default y if !SMALL_FLASH
+	help
+	   Select this option to enable support for per-connection conntrack timeouts.
+	   Increases the (uncompressed) size of nf_conntrack.ko by ~8kB.
+
 #
 # NFS related symbols
 #

feeds.conf.default

@@ -1,8 +1,4 @@
-src-git packages https://git.openwrt.org/feed/packages.git
-src-git luci https://git.openwrt.org/project/luci.git
-src-git routing https://git.openwrt.org/feed/routing.git
-src-git telephony https://git.openwrt.org/feed/telephony.git
-#src-git video https://github.com/openwrt/video.git
-#src-git targets https://github.com/openwrt/targets.git
-#src-git oldpackages http://git.openwrt.org/packages.git
-#src-link custom /usr/src/openwrt/custom-feed
+src-git packages https://git.openwrt.org/feed/packages.git^f1470815f41fe199bfdafe9a91ad115bc2e91203
+src-git luci https://git.openwrt.org/project/luci.git^75e41cba5160281b2d1dca922719efef29f7ffd8
+src-git routing https://git.openwrt.org/feed/routing.git^3eb59e9471858c83891979793f1dd29cca156919
+src-git telephony https://git.openwrt.org/feed/telephony.git^2a4541d46199ac96fac214d02c908402831c4dc6

include/bpf.mk

@@ -1,30 +1,40 @@
-BPF_DEPENDS := @HAS_BPF_TOOLCHAIN
-LLVM_VER:=
+BPF_DEPENDS := @HAS_BPF_TOOLCHAIN +@NEED_BPF_TOOLCHAIN
 
 CLANG_MIN_VER:=12
 
 ifneq ($(CONFIG_USE_LLVM_HOST),)
+  find-llvm-tool=$(firstword $(shell PATH='$(BPF_PATH)' command -v $(1) || echo '$(firstword $(1))-not-found'))
+
   BPF_TOOLCHAIN_HOST_PATH:=$(call qstrip,$(CONFIG_BPF_TOOLCHAIN_HOST_PATH))
   ifneq ($(BPF_TOOLCHAIN_HOST_PATH),)
     BPF_PATH:=$(BPF_TOOLCHAIN_HOST_PATH)/bin:$(PATH)
   else
     BPF_PATH:=$(PATH)
   endif
-  CLANG:=$(firstword $(shell PATH='$(BPF_PATH)' command -v clang clang-13 clang-12 clang-11))
+  CLANG:=$(call find-llvm-tool,clang clang-13 clang-12)
   LLVM_VER:=$(subst clang,,$(notdir $(CLANG)))
-endif
-ifneq ($(CONFIG_USE_LLVM_PREBUILT),)
-  CLANG:=$(TOPDIR)/llvm-bpf/bin/clang
-endif
-ifneq ($(CONFIG_USE_LLVM_BUILD),)
-  CLANG:=$(STAGING_DIR_HOST)/llvm-bpf/bin/clang
-endif
 
-LLVM_PATH:=$(dir $(CLANG))
-LLVM_LLC:=$(LLVM_PATH)/llc$(LLVM_VER)
-LLVM_DIS:=$(LLVM_PATH)/llvm-dis$(LLVM_VER)
-LLVM_OPT:=$(LLVM_PATH)/opt$(LLVM_VER)
-LLVM_STRIP:=$(LLVM_PATH)/llvm-strip$(LLVM_VER)
+  BPF_PATH:=$(dir $(CLANG)):$(BPF_PATH)
+  LLVM_LLC:=$(call find-llvm-tool,llc$(LLVM_VER))
+  LLVM_DIS:=$(call find-llvm-tool,llvm-dis$(LLVM_VER))
+  LLVM_OPT:=$(call find-llvm-tool,opt$(LLVM_VER))
+  LLVM_STRIP:=$(call find-llvm-tool,llvm-strip$(LLVM_VER))
+else
+  LLVM_PATH:=/invalid
+
+  ifneq ($(CONFIG_USE_LLVM_PREBUILT),)
+    LLVM_PATH:=$(TOPDIR)/llvm-bpf/bin
+  endif
+  ifneq ($(CONFIG_USE_LLVM_BUILD),)
+    LLVM_PATH:=$(STAGING_DIR_HOST)/llvm-bpf/bin
+  endif
+
+  CLANG:=$(LLVM_PATH)/clang
+  LLVM_LLC:=$(LLVM_PATH)/llc
+  LLVM_DIS:=$(LLVM_PATH)/llvm-dis
+  LLVM_OPT:=$(LLVM_PATH)/opt
+  LLVM_STRIP:=$(LLVM_PATH)/llvm-strip
+endif
 
 BPF_KARCH:=mips
 BPF_ARCH:=mips$(if $(CONFIG_ARCH_64BIT),64)$(if $(CONFIG_BIG_ENDIAN),,el)

include/cmake.mk

@@ -97,7 +97,7 @@ define Build/Configure/Default
 			-DCMAKE_SYSTEM_NAME=Linux \
 			-DCMAKE_SYSTEM_VERSION=1 \
 			-DCMAKE_SYSTEM_PROCESSOR=$(ARCH) \
-			-DCMAKE_BUILD_TYPE=Release \
+			-DCMAKE_BUILD_TYPE=$(if $(CONFIG_DEBUG),Debug,Release) \
 			-DCMAKE_C_FLAGS_RELEASE="-DNDEBUG" \
 			-DCMAKE_CXX_FLAGS_RELEASE="-DNDEBUG" \
 			-DCMAKE_C_COMPILER_LAUNCHER="$(CMAKE_C_COMPILER_LAUNCHER)" \

include/default-packages.mk

@@ -0,0 +1,5 @@
+ifneq ($(CONFIG_USE_APK),)
+  DEFAULT_PACKAGES += apk-mbedtls
+else
+  DEFAULT_PACKAGES += opkg
+endif

include/download.mk

@@ -232,7 +232,9 @@ define DownloadMethod/rawgit
 	echo "Generating formal git archive (apply .gitattributes rules)" && \
 	(cd $(SUBDIR) && git config core.abbrev 8 && \
 	git archive --format=tar HEAD --output=../$(SUBDIR).tar.git) && \
-	$(if $(filter skip,$(SUBMODULES)),true,$(TAR) --ignore-failed-read -C $(SUBDIR) -f $(SUBDIR).tar.git -r .git .gitmodules 2>/dev/null) && \
+	$(if $(filter skip,$(SUBMODULES)),true, \
+		$(TAR) --numeric-owner --owner=0 --group=0 --ignore-failed-read -C $(SUBDIR) -f $(SUBDIR).tar.git -r .git .gitmodules 2>/dev/null \
+	) && \
 	rm -rf $(SUBDIR) && mkdir $(SUBDIR) && \
 	$(TAR) -C $(SUBDIR) -xf $(SUBDIR).tar.git && \
 	(cd $(SUBDIR) && $(if $(filter skip,$(SUBMODULES)),true,git submodule update --init --recursive -- $(SUBMODULES) && \

include/feeds.mk

@@ -37,7 +37,7 @@ define FeedSourcesAppendOPKG
   echo 'src/gz %d_core %U/targets/%S/packages'; \
   $(strip $(if $(CONFIG_PER_FEED_REPO), \
 	echo 'src/gz %d_base %U/packages/%A/base'; \
-	$(if $(filter %SNAPSHOT-y,$(VERSION_NUMBER)-$(CONFIG_BUILDBOT)), \
+	$(if $(CONFIG_BUILDBOT), \
 		echo 'src/gz %d_kmods %U/targets/%S/kmods/$(LINUX_VERSION)-$(LINUX_RELEASE)-$(LINUX_VERMAGIC)';) \
 	$(foreach feed,$(FEEDS_AVAILABLE), \
 		$(if $(CONFIG_FEED_$(feed)), \
@@ -51,7 +51,7 @@ define FeedSourcesAppendAPK
   echo '%U/targets/%S/packages/packages.adb'; \
   $(strip $(if $(CONFIG_PER_FEED_REPO), \
 	echo '%U/packages/%A/base/packages.adb'; \
-	$(if $(filter %SNAPSHOT-y,$(VERSION_NUMBER)-$(CONFIG_BUILDBOT)), \
+	$(if $(CONFIG_BUILDBOT), \
 		echo '%U/targets/%S/kmods/$(LINUX_VERSION)-$(LINUX_RELEASE)-$(LINUX_VERMAGIC)/packages.adb';) \
 	$(foreach feed,$(FEEDS_AVAILABLE), \
 		$(if $(CONFIG_FEED_$(feed)), \

include/image-commands.mk

@@ -732,6 +732,10 @@ define Build/zip
 	rm -rf $@.tmp
 endef
 
+define Build/zyimage
+	$(STAGING_DIR_HOST)/bin/zyimage $(1) $@
+endef
+
 define Build/zyxel-ras-image
 	let \
 		newsize="$(call exp_units,$(RAS_ROOTFS_SIZE))"; \

include/image.mk

@@ -21,6 +21,11 @@ include $(INCLUDE_DIR)/rootfs.mk
 override MAKE:=$(_SINGLE)$(SUBMAKE)
 override NO_TRACE_MAKE:=$(_SINGLE)$(NO_TRACE_MAKE)
 
+##@
+# @brief Convert size with unit postfix to unitless expression in bytes.
+#
+# @param 1: Size with unit. Possible unit postfix are `g`, `m`, `k`.
+##
 exp_units = $(subst k, * 1024,$(subst m, * 1024k,$(subst g, * 1024m,$(1))))
 
 target_params = $(subst +,$(space),$*)
@@ -111,6 +116,12 @@ endef
 
 PROFILE_SANITIZED := $(call tolower,$(subst DEVICE_,,$(subst $(space),-,$(PROFILE))))
 
+##@
+# @brief Call function for each group of arguments.
+#
+# @param 1: List of lists of arguments. Lists are separated by `|`.
+# @param 2: Function to call for list of arguments.
+##
 define split_args
 $(foreach data, \
 	$(subst |,$(space),\
@@ -118,12 +129,24 @@ $(foreach data, \
 	$(call $(2),$(strip $(subst ^,$(space),$(data)))))
 endef
 
+##@
+# @brief Call build function with arguments.
+#
+# @param 1: Function to call. Function name is prepended with `Build/`.
+# @param 2...: Function arguments.
+##
 define build_cmd
 $(if $(Build/$(word 1,$(1))),,$(error Missing Build/$(word 1,$(1))))
 $(call Build/$(word 1,$(1)),$(wordlist 2,$(words $(1)),$(1)))
 
 endef
 
+##@
+# @brief Call build functions from the list.
+#
+# @param 1: List of build functions with arguments, separated by `|`.
+#           First word in each group is a build command without `Build/` prefix.
+##
 define concat_cmd
 $(call split_args,$(1),build_cmd)
 endef
@@ -163,6 +186,12 @@ DTC_WARN_FLAGS := \
 DTC_FLAGS += $(DTC_WARN_FLAGS)
 DTCO_FLAGS += $(DTC_WARN_FLAGS)
 
+##@
+# @brief Pad file to specified size.
+#
+# @param 1: File.
+# @param 2: Padding.
+##
 define Image/pad-to
 	dd if=$(1) of=$(1).new bs=$(2) conv=sync
 	mv $(1).new $(1)
@@ -403,26 +432,53 @@ define Device/InitProfile
   DEVICE_DESCRIPTION = Build firmware images for $$(DEVICE_TITLE)
 endef
 
+##@
+# @brief Image configuration variables.
+#
+# @param 1: Device name.
+##
 define Device/Init
+  ##@ Device name.
   DEVICE_NAME := $(1)
+  ##@ Commands to build kernel.
+  # Commands with arguments are separated by `|`.
+  ##
   KERNEL:=
+  ##@ Commands to build initramfs.
+  # Commands with arguments are separated by `|`.
+  ##
   KERNEL_INITRAMFS = $$(KERNEL)
+  ##@ Kernel command line.
   CMDLINE:=
 
+  ##@ Images to build.
   IMAGES :=
+  ##@ Artifacts to build.
   ARTIFACTS :=
+  ##@ Device image prefix.
   DEVICE_IMG_PREFIX := $(IMG_PREFIX)-$(1)
+  ##@ Device image name.
   DEVICE_IMG_NAME = $$(DEVICE_IMG_PREFIX)-$$(1)-$$(2)
+  ##@ Factory image name.
   FACTORY_IMG_NAME :=
+  ##@ Maximum image size. Optional.
   IMAGE_SIZE :=
+  ##@ Maximum image size. Optional.
   NAND_SIZE :=
+  ##@ Kernel image prefix.
   KERNEL_PREFIX = $$(DEVICE_IMG_PREFIX)
+  ##@ Kernel image suffix.
   KERNEL_SUFFIX := -kernel.bin
+  ##@ Initramfs image suffix.
   KERNEL_INITRAMFS_SUFFIX = $$(KERNEL_SUFFIX)
+  ##@ Kernel image name.
   KERNEL_IMAGE = $$(KERNEL_PREFIX)$$(KERNEL_SUFFIX)
+  ##@ Initramfs image prefix.
   KERNEL_INITRAMFS_PREFIX = $$(DEVICE_IMG_PREFIX)-initramfs
   KERNEL_INITRAMFS_IMAGE = $$(KERNEL_INITRAMFS_PREFIX)$$(KERNEL_INITRAMFS_SUFFIX)
+  ##@ Initramfs image name.
   KERNEL_INITRAMFS_NAME = $$(KERNEL_NAME)-initramfs
+  ##@ Kernel install flag.
   KERNEL_INSTALL :=
   KERNEL_NAME := vmlinux
   KERNEL_DEPENDS :=
@@ -513,6 +569,15 @@ endef
 
 define Device/Check/Common
   _PROFILE_SET = $$(strip $$(foreach profile,$$(PROFILES) DEVICE_$(1),$$(call DEVICE_CHECK_PROFILE,$$(profile))))
+  # Check if device is disabled and if so do not mark to be installed when ImageBuilder is used
+  ifeq ($(IB),1)
+    ifeq ($$(DEFAULT),n)
+      _PROFILE_SET :=
+    endif
+    ifeq ($$(BROKEN),y)
+      _PROFILE_SET :=
+    endif
+  endif
   DEVICE_PACKAGES += $$(call extra_packages,$$(DEVICE_PACKAGES))
   ifdef TARGET_PER_DEVICE_ROOTFS
     $$(eval $$(call merge_packages,_PACKAGES,$$(DEVICE_PACKAGES) $$(call DEVICE_EXTRA_PACKAGES,$(1))))

include/kernel-6.6

@@ -1,2 +1,2 @@
-LINUX_VERSION-6.6 = .58
-LINUX_KERNEL_HASH-6.6.58 = e7df81e588d70fab5ec3ec3bb04ac53d51f0860fc3b1ec45e0a4167a026899db
+LINUX_VERSION-6.6 = .110
+LINUX_KERNEL_HASH-6.6.110 = 1bf20daf5543b8759f325e55fb0da4913715e68741627a13380e66aaf219fb1d

include/kernel-defaults.mk

@@ -175,7 +175,6 @@ define Kernel/PrepareConfigPerRootfs
 		[ ! -d "$(1)" ] || rm -rf $(1); \
 		mkdir $(1) && $(CP) -T $(LINUX_DIR) $(1); \
 		touch $(1)/.config; \
-		rm -rf $(1)/usr/initramfs_data.cpio*; \
 	}
 endef
 
@@ -190,6 +189,7 @@ define Kernel/CompileImage/Initramfs
 		$(call Kernel/Configure/Initramfs,$(if $(1),$(1),$(TARGET_DIR)),$(LINUX_DIR)$(2)); \
 		$(CP) $(GENERIC_PLATFORM_DIR)/other-files/init $(if $(1),$(1),$(TARGET_DIR))/init; \
 		$(if $(SOURCE_DATE_EPOCH),touch -hcd "@$(SOURCE_DATE_EPOCH)" $(if $(1),$(1),$(TARGET_DIR)) $(if $(1),$(1),$(TARGET_DIR))/init;) \
+		rm -rf $(LINUX_DIR)$(2)/usr/initramfs_data.cpio*; \
 		$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS_SEPARATE), \
 			$(call locked,{ \
 				$(if $(call qstrip,$(CONFIG_EXTERNAL_CPIO)), \

include/meson.mk

@@ -124,7 +124,7 @@ define Build/Configure/Meson
 	$(call Meson/CreateCrossFile,$(PKG_BUILD_DIR)/openwrt-cross.txt)
 	$(call Meson, \
 		setup \
-		--buildtype plain \
+		--buildtype $(if $(CONFIG_DEBUG),debug,plain) \
 		--native-file $(PKG_BUILD_DIR)/openwrt-native.txt \
 		--cross-file $(PKG_BUILD_DIR)/openwrt-cross.txt \
 		-Ddefault_library=both \

include/optee-os.mk

@@ -0,0 +1,113 @@
+include $(INCLUDE_DIR)/prereq.mk
+
+PKG_NAME ?= optee-os
+
+ifndef PKG_SOURCE_PROTO
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL_FILE:=$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL = https://github.com/OP-TEE/optee_os/archive/refs/tags/
+TAR_OPTIONS+= --transform 's/optee_os/$(PKG_NAME)/'
+endif
+
+PKG_BUILD_DIR = $(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_TARGETS := bin
+PKG_FLAGS:=nonshared
+
+PKG_LICENSE:=BSD 2-Clause
+PKG_LICENSE_FILES:=LICENSE
+
+PKG_BUILD_PARALLEL ?= 1
+
+$(eval $(call TestHostCommand,python3-cryptography, \
+  Please install the Python3 cryptography module, \
+  $(STAGING_DIR_HOST)/bin/python3 -c 'import cryptography'))
+
+$(eval $(call TestHostCommand,python3-pyelftools, \
+    Please install the Python3 pyelftools module, \
+    $(STAGING_DIR_HOST)/bin/python3 -c 'import elftools'))
+
+export GCC_HONOUR_COPTS=s
+
+define Package/optee-os/install/default
+	$(CP) $(patsubst %,$(PKG_BUILD_DIR)/out/arm-plat-$(PLAT)/core/%,$(OPTEE_IMAGE)) $(1)/
+endef
+
+Package/optee-os/install = $(Package/optee-os/install/default)
+
+define Optee-os/Init
+  BUILD_TARGET:=
+  BUILD_SUBTARGET:=
+  BUILD_DEVICES:=
+  NAME:=
+  DEPENDS:=
+  HIDDEN:=
+  DEFAULT:=
+  VARIANT:=$(1)
+  PLAT:=$(1)
+  PLAT_FLAVOR:=
+  OPTEE_IMAGE:=tee-header_v2.bin tee-pager_v2.bin tee-pageable_v2.bin
+endef
+
+TARGET_DEP = TARGET_$(BUILD_TARGET)$(if $(BUILD_SUBTARGET),_$(BUILD_SUBTARGET))
+
+define Build/Optee-os/Target
+  $(eval $(call Optee-os/Init,$(1)))
+  $(eval $(call Optee-os/Default,$(1)))
+  $(eval $(call Optee-os/$(1),$(1)))
+
+  define Package/optee-os-$(1)
+    SECTION:=boot
+    CATEGORY:=Boot Loaders
+    TITLE:=OPTEE-OS for $(NAME)
+    VARIANT:=$(VARIANT)
+    DEPENDS:=@!IN_SDK $(DEPENDS)
+    HIDDEN:=$(HIDDEN)
+    ifneq ($(BUILD_TARGET),)
+      DEPENDS += @$(TARGET_DEP)
+      ifneq ($(BUILD_DEVICES),)
+        DEFAULT := y if ($(TARGET_DEP)_Default \
+		$(patsubst %,|| $(TARGET_DEP)_DEVICE_%,$(BUILD_DEVICES)) \
+		$(patsubst %,|| $(patsubst TARGET_%,TARGET_DEVICE_%,$(TARGET_DEP))_DEVICE_%,$(BUILD_DEVICES)))
+      endif
+    endif
+    $(if $(DEFAULT),DEFAULT:=$(DEFAULT))
+    URL:=https://optee.readthedocs.io
+  endef
+
+  define Package/optee-os-$(1)/install
+	$$(Package/optee-os/install)
+  endef
+endef
+
+define Build/Configure/Optee-os
+endef
+
+define Build/Compile/Optee-os
+	+$(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR) \
+		PATH=$(LINUX_DIR)/scripts/dtc/:$(STAGING_DIR_HOST)/bin:$(PATH) \
+		CROSS_COMPILE=$(TARGET_CROSS) \
+		CROSS_COMPILE_core="$(TARGET_CROSS)" \
+		CROSS_COMPILE_ta_arm64="$(TARGET_CROSS)" \
+		CROSS_COMPILE_ta_arm32="$(TARGET_CROSS)" \
+		$(if $(CONFIG_ARCH_64BIT), CFG_ARM64_core=y CFG_USER_TA_TARGETS=ta_arm64, CFG_ARM32_core=y) \
+		PLATFORM="$(PLAT)" \
+		PLATFORM_FLAVOR="$(call qstrip,$(PLAT_FLAVOR))" \
+		$(OPTEE_MAKE_FLAGS)
+endef
+
+define BuildPackage/Optee-os/Defaults
+  Build/Configure/Default = $$$$(Build/Configure/Optee-os)
+  Build/Compile/Default = $$$$(Build/Compile/Optee-os)
+endef
+
+define BuildPackage/Optee-os
+  $(eval $(call BuildPackage/Optee-os/Defaults))
+  $(foreach type,$(if $(DUMP),$(OPTEE_TARGETS),$(BUILD_VARIANT)), \
+    $(eval $(call Build/Optee-os/Target,$(type)))
+  )
+  $(eval $(call Build/DefaultTargets))
+  $(foreach type,$(if $(DUMP),$(OPTEE_TARGETS),$(BUILD_VARIANT)), \
+    $(call BuildPackage,optee-os-$(type))
+  )
+endef

include/target.mk

@@ -7,10 +7,17 @@ ifneq ($(__target_inc),1)
 __target_inc=1
 
 
-# default device type
+##@
+# @brief Default device type ( basic | nas | router ).
+##
 DEVICE_TYPE?=router
 
-# Default packages - the really basic set
+##@
+# @brief Default packages.
+#
+# The really basic set. Additional packages are added based on @DEVICE_TYPE and
+# @CONFIG_* values.
+##
 DEFAULT_PACKAGES:=\
 	base-files \
 	ca-bundle \
@@ -27,15 +34,21 @@ DEFAULT_PACKAGES:=\
 	urandom-seed \
 	urngd
 
-# For the basic set
+##@
+# @brief Default packages for @DEVICE_TYPE basic.
+##
 DEFAULT_PACKAGES.basic:=
-# For nas targets
+##@
+# @brief Default packages for @DEVICE_TYPE nas.
+##
 DEFAULT_PACKAGES.nas:=\
 	block-mount \
 	fdisk \
 	lsblk \
 	mdadm
-# For router targets
+##@
+# @brief Default packages for @DEVICE_TYPE router.
+##
 DEFAULT_PACKAGES.router:=\
 	dnsmasq \
 	firewall4 \
@@ -77,51 +90,26 @@ else
   endif
 endif
 
-ifneq ($(DUMP),)
-  # Parse generic config that might be set before a .config is generated to modify the
-  # default package configuration
-  # Keep DYNAMIC_DEF_PKG_CONF in sync with toplevel.mk to reflect the same configs
-  DYNAMIC_DEF_PKG_CONF := CONFIG_USE_APK CONFIG_SELINUX CONFIG_SMALL_FLASH CONFIG_SECCOMP
-  $(foreach config, $(DYNAMIC_DEF_PKG_CONF), \
-    $(eval $(config) := $(shell grep "$(config)=y" $(TOPDIR)/.config 2>/dev/null)) \
-  )
-  # The config options that are enabled by default and where other default
-  # packages depends on needs to be set if they are missing in the .config.
-  ifeq ($(shell grep "CONFIG_SECCOMP" $(TOPDIR)/.config 2>/dev/null),)
-    ifeq ($(filter $(BOARD), uml),)
-    ifneq ($(filter $(ARCH), aarch64 arm armeb mips mipsel mips64 mips64el i386 powerpc x86_64),)
-      CONFIG_SECCOMP := y
-    endif
-    endif
-  endif
-endif
-
-ifneq ($(CONFIG_USE_APK),)
-DEFAULT_PACKAGES+=apk-mbedtls
-else
-DEFAULT_PACKAGES+=opkg
-endif
-
-ifneq ($(CONFIG_SELINUX),)
-DEFAULT_PACKAGES+=busybox-selinux procd-selinux
-else
-DEFAULT_PACKAGES+=busybox procd
-endif
-
 # include ujail on systems with enough storage
-ifeq ($(CONFIG_SMALL_FLASH),)
-DEFAULT_PACKAGES+=procd-ujail
-endif
-
-# include seccomp ld-preload hooks if kernel supports it
-ifneq ($(CONFIG_SECCOMP),)
-DEFAULT_PACKAGES+=procd-seccomp
+ifeq ($(filter small_flash,$(FEATURES)),)
+  DEFAULT_PACKAGES+=procd-ujail
 endif
 
 # Add device specific packages (here below to allow device type set from subtarget)
 DEFAULT_PACKAGES += $(DEFAULT_PACKAGES.$(DEVICE_TYPE))
 
+##@
+# @brief Filter out packages, prepended with `-`.
+#
+# @param 1: Package list.
+##
 filter_packages = $(filter-out -% $(patsubst -%,%,$(filter -%,$(1))),$(1))
+
+##@
+# @brief Append extra package dependencies.
+#
+# @param 1: Package list.
+##
 extra_packages = $(if $(filter wpad wpad-% nas,$(1)),iwinfo)
 
 define ProfileDefault

include/toplevel.mk

@@ -75,22 +75,7 @@ endif
 
 _ignore = $(foreach p,$(IGNORE_PACKAGES),--ignore $(p))
 
-# Config that will invalidate the .targetinfo as they will affect
-# DEFAULT_PACKAGES.
-# Keep DYNAMIC_DEF_PKG_CONF in sync with target.mk to reflect the same configs
-DYNAMIC_DEF_PKG_CONF := CONFIG_USE_APK CONFIG_SELINUX CONFIG_SMALL_FLASH CONFIG_SECCOMP
-check-dynamic-def-pkg: FORCE
-	@+DEF_PKG_CONFS=""; \
-	if [ -f $(TOPDIR)/.config ]; then \
-		for config in $(DYNAMIC_DEF_PKG_CONF); do \
-			DEF_PKG_CONFS="$$DEF_PKG_CONFS "$$(grep "$$config"=y $(TOPDIR)/.config); \
-		done; \
-	fi; \
-	[ ! -f tmp/.packagedynamicdefault ] || OLD_DEF_PKG_CONFS=$$(cat tmp/.packagedynamicdefault); \
-	[ "$$DEF_PKG_CONFS" = "$$OLD_DEF_PKG_CONFS" ] || rm -rf tmp/info/.targetinfo*; \
-	mkdir -p tmp && echo "$$DEF_PKG_CONFS" > tmp/.packagedynamicdefault;
-
-prepare-tmpinfo: check-dynamic-def-pkg FORCE
+prepare-tmpinfo: FORCE
 	@+$(MAKE) -r -s $(STAGING_DIR_HOST)/.prereq-build $(PREP_MK)
 	mkdir -p tmp/info feeds
 	[ -e $(TOPDIR)/feeds/base ] || ln -sf $(TOPDIR)/package $(TOPDIR)/feeds/base

include/trusted-firmware-a.mk

@@ -1,12 +1,20 @@
 PKG_NAME ?= trusted-firmware-a
 PKG_CPE_ID ?= cpe:/a:arm:trusted_firmware-a
 
-ifndef PKG_SOURCE_PROTO
-PKG_SOURCE = trusted-firmware-a-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/snapshot
+PKG_LTS ?=
+
+ifneq ($(PKG_LTS),)
+PKG_VERSION_PREFIX:=lts-v
+PKG_BUILD_DIR = $(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION_PREFIX)$(PKG_VERSION)
+else
+PKG_VERSION_PREFIX:=v
+PKG_BUILD_DIR = $(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
 endif
 
-PKG_BUILD_DIR = $(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
+ifndef PKG_SOURCE_PROTO
+PKG_SOURCE = trusted-firmware-a-$(PKG_VERSION_PREFIX)$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL:=https://codeload.github.com/TrustedFirmware-A/trusted-firmware-a/tar.gz/$(PKG_VERSION_PREFIX)$(PKG_VERSION)?
+endif
 
 PKG_TARGETS := bin
 PKG_FLAGS:=nonshared
@@ -82,7 +90,7 @@ define Build/Compile/Trusted-Firmware-A
 		OPENSSL_DIR=$(STAGING_DIR_HOST) \
 		$(if $(DTC),DTC="$(DTC)") \
 		PLAT=$(PLAT) \
-		BUILD_STRING="OpenWrt v$(PKG_VERSION)-$(PKG_RELEASE) ($(VARIANT))" \
+		BUILD_STRING="OpenWrt $(PKG_VERSION_PREFIX)$(PKG_VERSION)-$(PKG_RELEASE) ($(VARIANT))" \
 		$(if $(CONFIG_BINUTILS_VERSION_2_37)$(CONFIG_BINUTILS_VERSION_2_38),,LDFLAGS="-no-warn-rwx-segments") \
 		$(TFA_MAKE_FLAGS)
 endef

include/version.mk

@@ -23,13 +23,13 @@ PKG_CONFIG_DEPENDS += \
 sanitize = $(call tolower,$(subst _,-,$(subst $(space),-,$(1))))
 
 VERSION_NUMBER:=$(call qstrip,$(CONFIG_VERSION_NUMBER))
-VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),SNAPSHOT)
+VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),24.10.4)
 
 VERSION_CODE:=$(call qstrip,$(CONFIG_VERSION_CODE))
-VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),$(REVISION))
+VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),r28959-29397011cc)
 
 VERSION_REPO:=$(call qstrip,$(CONFIG_VERSION_REPO))
-VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/snapshots)
+VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/releases/24.10.4)
 
 VERSION_DIST:=$(call qstrip,$(CONFIG_VERSION_DIST))
 VERSION_DIST:=$(if $(VERSION_DIST),$(VERSION_DIST),OpenWrt)

package/Makefile

@@ -142,10 +142,7 @@ else
 			$(call ERROR_MESSAGE,WARNING: Applying padding in $$d/Packages to workaround usign SHA-512 bug!); \
 			{ echo ""; echo ""; } >> Packages;; \
 		esac; \
-		echo -n '{"architecture": "$(ARCH_PACKAGES)", "packages":{' > index.json; \
-		sed -n -e 's/^Package: \(.*\)$$/"\1":/p' -e 's/^Version: \(.*\)$$/"\1",/p' Packages | tr '\n' ' ' >> index.json; \
-		echo '}}' >> index.json; \
-		sed -i 's/, }}/}}/' index.json; \
+		$(SCRIPT_DIR)/make-index-json.py -f opkg -a "$(ARCH_PACKAGES)" Packages > index.json; \
 		gzip -9nc Packages > Packages.gz; \
 	); done
 ifdef CONFIG_SIGNED_PACKAGES

package/base-files/Makefile

@@ -39,7 +39,11 @@ endif
 define Package/base-files
   SECTION:=base
   CATEGORY:=Base system
-  DEPENDS:=+netifd +libc +jsonfilter +SIGNED_PACKAGES:usign +SIGNED_PACKAGES:openwrt-keyring +NAND_SUPPORT:ubi-utils +fstools +fwtool
+  DEPENDS:= \
+	+netifd +libc +jsonfilter +SIGNED_PACKAGES:usign +SIGNED_PACKAGES:openwrt-keyring \
+	+NAND_SUPPORT:ubi-utils +fstools +fwtool \
+	+SELINUX:procd-selinux +!SELINUX:procd +USE_SECCOMP:procd-seccomp \
+	+SELINUX:busybox-selinux +!SELINUX:busybox
   TITLE:=Base filesystem for OpenWrt
   URL:=http://openwrt.org/
   VERSION:=$(PKG_RELEASE)~$(lastword $(subst -, ,$(REVISION)))
@@ -251,6 +255,7 @@ ifneq ($(CONFIG_USE_APK),)
 	$(VERSION_SED_SCRIPT) $(1)/etc/apk/repositories
 
 	rm -f $(1)/etc/uci-defaults/13_fix-group-user
+	rm -f $(1)/sbin/pkg_check
 else
 	$(if $(CONFIG_CLEAN_IPKG),, \
 		mkdir -p $(1)/etc/opkg; \

package/base-files/files/etc/init.d/boot

@@ -24,6 +24,8 @@ boot() {
 	chmod 1777 /var/lock
 	mkdir -p /var/log
 	mkdir -p /var/run
+	ln -s /var/run /run
+	ln -s /var/lock /run/lock
 	mkdir -p /var/state
 	mkdir -p /var/tmp
 	mkdir -p /tmp/.uci
@@ -33,9 +35,9 @@ boot() {
 	mkdir -p /tmp/resolv.conf.d
 	touch /tmp/resolv.conf.d/resolv.conf.auto
 	ln -sf /tmp/resolv.conf.d/resolv.conf.auto /tmp/resolv.conf
-	grep -q debugfs /proc/filesystems && /bin/mount -o noatime -t debugfs debugfs /sys/kernel/debug
+	grep -q debugfs /proc/filesystems && /bin/mount -o nosuid,nodev,noexec,noatime -t debugfs debugfs /sys/kernel/debug
 	grep -q bpf /proc/filesystems && /bin/mount -o nosuid,nodev,noexec,noatime,mode=0700 -t bpf bpffs /sys/fs/bpf
-	grep -q pstore /proc/filesystems && /bin/mount -o noatime -t pstore pstore /sys/fs/pstore
+	grep -q pstore /proc/filesystems && /bin/mount -o nosuid,nodev,noexec,noatime -t pstore pstore /sys/fs/pstore
 	[ "$FAILSAFE" = "true" ] && touch /tmp/.failsafe
 
 	touch /tmp/.config_pending

package/base-files/files/etc/rc.common

@@ -100,10 +100,6 @@ service_triggers() {
 	return 0
 }
 
-service_data() {
-	return 0
-}
-
 service_running() {
 	local instance="${1:-*}"
 

package/base-files/files/etc/uci-defaults/50-root-passwd

@@ -3,10 +3,16 @@
 json_init
 json_load "$(cat /etc/board.json)"
 
-json_select credentials
-	json_get_vars root_password_hash root_password_hash
-	[ -z "$root_password_hash" ] || sed -i "s|^root:[^:]*|root:$root_password_hash|g" /etc/shadow
+if json_is_a credentials object; then
+	json_select credentials
+		json_get_vars root_password_hash root_password_hash
+		if [ -n "$root_password_hash" ]; then
+			sed -i "s|^root:[^:]*|root:$root_password_hash|g" /etc/shadow
+		fi
 
-	json_get_vars root_password_plain root_password_plain
-	[ -z "$root_password_plain" ] || { (echo "$root_password_plain"; sleep 1; echo "$root_password_plain") | passwd root }
-json_select ..
+		json_get_vars root_password_plain root_password_plain
+		if [ -n "$root_password_plain" ]; then
+			(echo "$root_password_plain"; sleep 1; echo "$root_password_plain") | passwd root
+		fi
+	json_select ..
+fi

package/base-files/files/lib/functions/caldata.sh

@@ -125,8 +125,8 @@ caldata_valid() {
 caldata_patch_data() {
 	local data=$1
 	local data_count=$((${#1} / 2))
-	local data_offset=$(($2))
-	local chksum_offset=$(($3))
+	[ -n "$2" ] && local data_offset=$(($2))
+	[ -n "$3" ] && local chksum_offset=$(($3))
 	local target=$4
 	local fw_data
 	local fw_chksum

package/base-files/files/lib/functions/system.sh

@@ -66,7 +66,7 @@ get_mac_ascii() {
 	local key="$2"
 	local mac_dirty
 
-	mac_dirty=$(strings "$part" | sed -n 's/^'"$key"'=//p')
+	mac_dirty=$(strings "$part" | tr -d ' \t' | sed -n 's/^'"$key"'=//p' | head -n 1)
 
 	# "canonicalize" mac
 	[ -n "$mac_dirty" ] && macaddr_canonicalize "$mac_dirty"

package/base-files/files/sbin/sysupgrade

@@ -20,6 +20,7 @@ CONF_IMAGE=
 CONF_BACKUP_LIST=0
 CONF_BACKUP=
 CONF_RESTORE=
+USE_CURR_PART=0
 NEED_IMAGE=
 HELP=0
 TEST=0
@@ -50,6 +51,7 @@ while [ -n "$1" ]; do
 		-r|--restore-backup) CONF_RESTORE="$2" NEED_IMAGE=1; shift;;
 		-l|--list-backup) CONF_BACKUP_LIST=1;;
 		-f) CONF_IMAGE="$2"; shift;;
+		-s) USE_CURR_PART=1;;
 		-F|--force) export FORCE=1;;
 		-T|--test) TEST=1;;
 		-h|--help) HELP=1; break;;
@@ -79,6 +81,7 @@ upgrade-option:
 	-p           do not attempt to restore the partition table after flash.
 	-k           include in backup a list of current installed packages at
 	             $INSTALLED_PACKAGES
+	-s           stay on current partition (for dual firmware devices)
 	-T | --test
 	             Verify image and config .tar.gz but do not actually flash.
 	-F | --force
@@ -416,6 +419,7 @@ else
 	json_add_string command "$COMMAND"
 	json_add_object options
 	json_add_int save_partitions "$SAVE_PARTITIONS"
+	[ $USE_CURR_PART -eq 1 ] && json_add_boolean use_curr_part 1
 	json_close_object
 
 	ubus call system sysupgrade "$(json_dump)"

package/base-files/image-config.in

@@ -190,7 +190,7 @@ if VERSIONOPT
 	config VERSION_REPO
 		string
 		prompt "Release repository"
-		default "https://downloads.openwrt.org/snapshots"
+		default "https://downloads.openwrt.org/releases/24.10.4"
 		help
 			This is the repository address embedded in the image, it defaults
 			to the trunk snapshot repo; the url may contain the following placeholders:
@@ -266,7 +266,7 @@ if VERSIONOPT
 	config VERSION_CODE_FILENAMES
 		bool
 		prompt "Revision code in filenames"
-		default y
+		default n
 		help
 			Enable this to include the revision identifier or the configured
 			version code into the firmware image, SDK- and Image Builder archive

package/boot/arm-trusted-firmware-mediatek/Makefile

@@ -35,6 +35,8 @@ define Trusted-Firmware-A/Default
   DRAM_USE_COMB:=
   RAM_BOOT_UART_DL:=
   USE_UBI:=
+  FIP_OFFSET:=
+  FIP_SIZE:=
 endef
 
 define Trusted-Firmware-A/mt7622-nor-1ddr
@@ -221,6 +223,16 @@ define Trusted-Firmware-A/mt7981-spim-nand-ddr3
   DDR_TYPE:=ddr3
 endef
 
+define Trusted-Firmware-A/mt7981-cudy-tr3000-v1
+  NAME:=Cudy TR3000 v1 (SPI-NAND via SPIM, DDR3)
+  BOOT_DEVICE:=spim-nand
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7981
+  DDR_TYPE:=ddr3
+  FIP_OFFSET:=0x3c0000
+  FIP_SIZE:=0x200000
+endef
+
 define Trusted-Firmware-A/mt7986-ram-ddr4
   NAME:=MediaTek MT7986 (RAM, DDR4)
   BOOT_DEVICE:=ram
@@ -352,6 +364,15 @@ define Trusted-Firmware-A/mt7986-spim-nand-ddr3
   DDR_TYPE:=ddr3
 endef
 
+define Trusted-Firmware-A/mt7986-spim-nand-ubi-ddr3
+  NAME:=MediaTek MT7986 (SPI-NAND via SPIM using UBI, DDR3)
+  BOOT_DEVICE:=spim-nand
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7986
+  DDR_TYPE:=ddr3
+  USE_UBI:=1
+endef
+
 define Trusted-Firmware-A/mt7988-nor-ddr3
   NAME:=MediaTek MT7988 (SPI-NOR, DDR3)
   BOOT_DEVICE:=nor
@@ -525,12 +546,14 @@ TFA_TARGETS:= \
 	mt7981-ram-ddr4 \
 	mt7981-emmc-ddr4 \
 	mt7981-spim-nand-ddr4 \
+	mt7981-cudy-tr3000-v1 \
 	mt7986-ram-ddr3 \
 	mt7986-emmc-ddr3 \
 	mt7986-nor-ddr3 \
 	mt7986-sdmmc-ddr3 \
 	mt7986-snand-ddr3 \
 	mt7986-spim-nand-ddr3 \
+	mt7986-spim-nand-ubi-ddr3 \
 	mt7986-ram-ddr4 \
 	mt7986-emmc-ddr4 \
 	mt7986-nor-ddr4 \
@@ -570,6 +593,9 @@ TFA_MAKE_FLAGS += \
 	$(if $(RAM_BOOT_UART_DL),RAM_BOOT_UART_DL=1) \
 	$(if $(USE_UBI),UBI=1 $(if $(findstring mt7622,$(PLAT)),OVERRIDE_UBI_START_ADDR=0x80000)) \
 	$(if $(USE_UBI),UBI=1 $(if $(findstring mt7981,$(PLAT)),OVERRIDE_UBI_START_ADDR=0x100000)) \
+	$(if $(USE_UBI),UBI=1 $(if $(findstring mt7986,$(PLAT)),OVERRIDE_UBI_START_ADDR=0x200000)) \
+	$(if $(FIP_OFFSET),OVERRIDE_FIP_BASE=$(FIP_OFFSET)) \
+	$(if $(FIP_SIZE),OVERRIDE_FIP_SIZE=$(FIP_SIZE)) \
 	$(if $(RAM_BOOT_UART_DL),bl2,all)
 
 define Package/trusted-firmware-a-ram/install

package/boot/arm-trusted-firmware-stm32/Makefile

@@ -0,0 +1,64 @@
+#
+# Copyright (C) 2024 Bootlin
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_VERSION:=2.10.17
+PKG_RELEASE:=1
+PKG_LTS:=1
+
+PKG_HASH:=2558b2579dd1c45db6de89c49e647c109022d45da03eb74e0f6123c294295099
+PKG_MAINTAINER:=Thomas Richard <thomas.richard@bootlin.com>
+
+include $(INCLUDE_DIR)/kernel.mk
+include $(INCLUDE_DIR)/trusted-firmware-a.mk
+include $(INCLUDE_DIR)/package.mk
+
+define Trusted-Firmware-A/Default
+  BUILD_TARGET:=stm32
+  BUILD_DEVICES:=$(1)
+  DEPENDS:=+u-boot-$(1) +optee-os-$(1)
+endef
+
+define Trusted-Firmware-A/stm32mp1
+  BUILD_SUBTARGET:=stm32mp1
+  PLAT:=stm32mp1
+  MAKE_ARGS += BL32_EXTRA2=$(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-tee-pageable_v2.bin \
+	       STM32MP_USB_PROGRAMMER=1 \
+	       STM32MP1_OPTEE_IN_SYSRAM=1 \
+	       ARM_ARCH_MAJOR=7
+endef
+
+define Trusted-Firmware-A/stm32mp135f-dk
+  $(call Trusted-Firmware-A/stm32mp1)
+  NAME:=STM32MP135F-DK
+  DTB_FILE_NAME=stm32mp135f-dk.dtb
+endef
+
+TFA_TARGETS := stm32mp135f-dk
+
+TFA_MAKE_FLAGS += \
+		ARCH=aarch32 AARCH32_SP=optee \
+		BL32=$(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-tee-header_v2.bin \
+		BL32_EXTRA1=$(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-tee-pager_v2.bin \
+		BL33=$(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-u-boot.bin \
+		BL33_CFG=$(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-u-boot.dtb \
+		DTB_FILE_NAME=$(DTB_FILE_NAME) \
+		STM32MP_SDMMC=1 \
+		TARGET_BOARD="" \
+		$(MAKE_ARGS) \
+		all fip
+
+define Package/trusted-firmware-a/install
+	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
+	$(CP) $(PKG_BUILD_DIR)/build/$(PLAT)/release/tf-a-$(BUILD_VARIANT).stm32 \
+		$(STAGING_DIR_IMAGE)/tf-a-$(BUILD_VARIANT).stm32
+	$(CP) $(PKG_BUILD_DIR)/build/$(PLAT)/release/fip.bin \
+		$(STAGING_DIR_IMAGE)/fip-$(BUILD_VARIANT).bin
+endef
+
+$(eval $(call BuildPackage/Trusted-Firmware-A))

package/boot/optee-os-stm32/Makefile

@@ -0,0 +1,49 @@
+#
+# Copyright (C) 2024 Bootlin
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_VERSION:=4.3.0
+PKG_RELEASE:=1
+
+PKG_HASH:=390b271905c828d6def9fa6a77bbaa425f3b434d733c8eb18f582ccbc6896096
+PKG_MAINTAINER:=Thomas Richard <thomas.richard@bootlin.com>
+
+OPTEE_USE_INTREE_DTC:=1
+
+include $(INCLUDE_DIR)/kernel.mk
+include $(INCLUDE_DIR)/optee-os.mk
+include $(INCLUDE_DIR)/package.mk
+
+define Optee-os/Default
+  BUILD_TARGET:=stm32
+endef
+
+define Optee-os/stm32mp1
+  BUILD_SUBTARGET:=stm32mp1
+  PLAT:=stm32mp1
+endef
+
+define Optee-os/stm32mp135f-dk
+  $(call Optee-os/stm32mp1)
+  NAME:=STM32MP135F-DK
+  PLAT_FLAVOR:=135F_DK
+endef
+
+OPTEE_TARGETS := stm32mp135f-dk
+
+define Package/optee-os/install/default
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
+	$(foreach img,$(OPTEE_IMAGE), \
+		$(CP) $(PKG_BUILD_DIR)/out/arm-plat-$(PLAT)/core/$(img) $(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-$(img); \
+	)
+endef
+
+$(eval $(call BuildPackage/Optee-os))

package/boot/uboot-d1/Makefile

@@ -30,7 +30,7 @@ define U-Boot/dongshan_nezha_stu
   OPENSBI:=generic
   DEPENDS:=+opensbi_generic
   UBOOT_DTS:=sun20i-d1-dongshan-nezha-stu.dtb
-  BUILD_DEVICES:=dongshan_nezha_stu
+  BUILD_DEVICES:=100ask_dongshan-nezha-stu
 endef
 
 define U-Boot/lichee_rv_dock
@@ -38,7 +38,7 @@ define U-Boot/lichee_rv_dock
   OPENSBI:=generic
   DEPENDS:=+opensbi_generic
   UBOOT_DTS:=sun20i-d1-lichee-rv-dock.dtb
-  BUILD_DEVICES:=lichee_rv_dock
+  BUILD_DEVICES:=sipeed_lichee-rv-dock
 endef
 
 define U-Boot/mangopi_mq_pro
@@ -46,7 +46,7 @@ define U-Boot/mangopi_mq_pro
   OPENSBI:=generic
   DEPENDS:=+opensbi_generic
   UBOOT_DTS:=sun20i-d1-mangopi-mq-pro.dtb
-  BUILD_DEVICES:=mangopi_mq_pro
+  BUILD_DEVICES:=widora_mangopi-mq-pro
 endef
 
 define U-Boot/nezha
@@ -54,7 +54,7 @@ define U-Boot/nezha
   OPENSBI:=generic
   DEPENDS:=+opensbi_generic
   UBOOT_DTS:=sun20i-d1-nezha.dtb
-  BUILD_DEVICES:=nezha
+  BUILD_DEVICES:=allwinner_d1-nezha
 endef
 
 UBOOT_TARGETS := \
@@ -74,7 +74,7 @@ endef
 define Build/InstallDev
 	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/$(DTS_DIR)/$(UBOOT_DTS) $(STAGING_DIR_IMAGE)/$(UBOOT_DTS)
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/$(UBOOT_IMAGE) $(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-$(UBOOT_IMAGE)
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/$(UBOOT_IMAGE) $(STAGING_DIR_IMAGE)/$(BUILD_DEVICES)-$(UBOOT_IMAGE)
 	mkimage -C none -A riscv -T script -d uEnv-$(UENV).txt \
 		$(STAGING_DIR_IMAGE)/$(BUILD_DEVICES)-boot.scr
 endef

package/boot/uboot-envtools/files/ath79

@@ -28,6 +28,7 @@ asus,rt-ac59u-v2|\
 asus,zenwifi-cd6n|\
 asus,zenwifi-cd6r|\
 buffalo,bhr-4grv2|\
+buffalo,wzr-450hp2|\
 devolo,magic-2-wifi|\
 engenius,eap300-v2|\
 engenius,eap350-v1|\
@@ -163,6 +164,7 @@ ruckus,zf7372)
 	ubootenv_add_uci_config "/dev/mtd2" "0x0" "0x40000" "0x10000"
 	;;
 sophos,ap15|\
+sophos,ap15c|\
 sophos,ap55|\
 sophos,ap55c|\
 sophos,ap100|\

package/boot/uboot-envtools/files/imx_cortexa53

@@ -0,0 +1,21 @@
+[ -e /etc/config/ubootenv ] && exit 0
+
+touch /etc/config/ubootenv
+
+. /lib/uboot-envtools.sh
+. /lib/functions.sh
+
+board=$(board_name)
+
+case "$board" in
+gw,imx8m*|\
+gateworks,imx8m*)
+	# board boots from emmc boot0 hardware partition
+	ubootenv_add_uci_config /dev/mmcblk2boot0 0x3f0000 0x8000
+	ubootenv_add_uci_config /dev/mmcblk2boot0 0x3f8000 0x8000
+esac
+
+config_load ubootenv
+config_foreach ubootenv_add_app_config ubootenv
+
+exit 0

package/boot/uboot-envtools/files/mediatek_filogic

@@ -34,11 +34,16 @@ ubootenv_add_ubi_default() {
 
 case "$board" in
 abt,asr3000|\
+cmcc,a10-ubootmod|\
+cudy,tr3000-v1-ubootmod|\
 h3c,magic-nx30-pro|\
 jcg,q30-pro|\
+mercusys,mr90x-v1-ubi|\
 netcore,n60|\
+netis,nx31|\
 nokia,ea0326gmp|\
 qihoo,360t7|\
+routerich,ax3000-ubootmod|\
 tplink,tl-xdr4288|\
 tplink,tl-xdr6086|\
 tplink,tl-xdr6088|\
@@ -49,6 +54,17 @@ xiaomi,redmi-router-ax6000-ubootmod|\
 zyxel,ex5601-t0-ubootmod)
 	ubootenv_add_ubi_default
 	;;
+acer,predator-w6|\
+acer,predator-w6d|\
+acer,vero-w6m|\
+glinet,gl-mt2500|\
+glinet,gl-mt6000|\
+glinet,gl-x3000|\
+glinet,gl-xe3000|\
+huasifei,wh3000)
+	local envdev=$(find_mmc_part "u-boot-env")
+	ubootenv_add_uci_config "$envdev" "0x0" "0x80000"
+	;;
 asus,rt-ax59u)
 	ubootenv_add_uci_config "/dev/mtd0" "0x100000" "0x20000" "0x20000"
 	;;
@@ -83,21 +99,20 @@ zbtlink,zbt-z8102ax|\
 zbtlink,zbt-z8103ax)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
 	;;
-dlink,aquila-pro-ai-m30-a1)
+dlink,aquila-pro-ai-m30-a1|\
+dlink,aquila-pro-ai-m60-a1)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x40000"
 	;;
-glinet,gl-x3000|\
-glinet,gl-xe3000|\
-glinet,gl-mt2500|\
-glinet,gl-mt6000)
-	local envdev=$(find_mmc_part "u-boot-env")
-	ubootenv_add_uci_config "$envdev" "0x0" "0x80000"
+gatonetworks,gdsp)
+	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000"
 	;;
 glinet,gl-mt3000)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x20000"
 	;;
+mercusys,mr80x-v3|\
 mercusys,mr90x-v1|\
 routerich,ax3000|\
+routerich,ax3000-v1|\
 tplink,re6000xd)
 	local envdev=/dev/mtd$(find_mtd_index "u-boot-env")
 	ubootenv_add_uci_config "$envdev" "0x0" "0x20000" "0x20000" "1"
@@ -115,6 +130,9 @@ smartrg,sdg-8734)
 	local envdev=$(find_mmc_part "u-boot-env" "mmcblk0")
 	ubootenv_add_uci_config "$envdev" "0x0" "0x8000" "0x8000"
 	;;
+tplink,archer-ax80-v1)
+	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000" "8"
+	;;
 ubnt,unifi-6-plus)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x10000"
 	;;

package/boot/uboot-envtools/files/qualcommax_ipq807x

@@ -29,6 +29,11 @@ edimax,cax1800)
 	[ -n "$idx" ] && \
 		ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x10000" "0x20000"
 	;;
+linksys,homewrk)
+	idx="$(find_mtd_index 0:appsblenv)"
+	[ -n "$idx" ] && \
+		ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x40000" "0x40000"
+	;;
 linksys,mx4200v1|\
 linksys,mx4200v2|\
 linksys,mx5300|\
@@ -37,6 +42,11 @@ linksys,mx8500)
 	[ -n "$idx" ] && \
 		ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x40000" "0x20000" "2"
 	;;
+linksys,mx4300)
+	idx="$(find_mtd_index u_env)"
+	[ -n "$idx" ] && \
+		ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x40000" "0x40000" "1"
+	;;
 netgear,sxr80|\
 netgear,sxs80|\
 tplink,eap660hd-v1)

package/boot/uboot-envtools/files/ramips

@@ -19,8 +19,10 @@ alfa-network,r36m-e4g|\
 alfa-network,tube-e4g|\
 engenius,epg600|\
 engenius,esr600h|\
+hongdian,h8922-v30|\
 linksys,re7000|\
 meig,slt866|\
+qding,qc202|\
 sitecom,wlr-4100-v1-002|\
 zyxel,keenetic-lite-iii-a)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x1000"
@@ -62,6 +64,7 @@ kroks,kndrt31r19|\
 mediatek,linkit-smart-7688|\
 samknows,whitebox-v8|\
 xiaomi,mi-router-4c|\
+xiaomi,miwifi-3a|\
 xiaomi,miwifi-nano|\
 zbtlink,zbt-wg2626|\
 zte,mf283plus)
@@ -147,7 +150,8 @@ xiaomi,mi-router-cr6608|\
 xiaomi,mi-router-cr6609)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x20000"
 	;;
-dna,valokuitu-plus-ex400)
+dna,valokuitu-plus-ex400|\
+genexis,pulse-ex400)
 	ubootenv_add_uci_config "/dev/ubi0_0" "0x0" "0x1f000" "0x1f000" "1"
 	ubootenv_add_uci_config "/dev/ubi0_1" "0x0" "0x1f000" "0x1f000" "1"
 	;;

package/boot/uboot-envtools/files/realtek

@@ -28,6 +28,7 @@ zyxel,gs1900-10hp|\
 zyxel,gs1900-16|\
 zyxel,gs1900-24-v1|\
 zyxel,gs1900-24e|\
+zyxel,gs1900-24ep|\
 zyxel,gs1900-24hp-v1|\
 zyxel,gs1900-24hp-v2)
 	idx="$(find_mtd_index u-boot-env)"

package/boot/uboot-mediatek/Makefile

@@ -231,6 +231,18 @@ define U-Boot/mt7981_abt_asr3000
   DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
 endef
 
+define U-Boot/mt7981_cmcc_a10
+  NAME:=CMCC A10
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=cmcc_a10-ubootmod
+  UBOOT_CONFIG:=mt7981_cmcc_a10
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
+endef
+
 define U-Boot/mt7981_cmcc_rax3000m-emmc
   NAME:=CMCC RAX3000M
   BUILD_SUBTARGET:=filogic
@@ -255,6 +267,17 @@ define U-Boot/mt7981_cmcc_rax3000m-nand
   DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr4
 endef
 
+define U-Boot/mt7981_cudy_tr3000-v1
+  NAME:=Cudy TR3000 v1
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=cudy_tr3000-v1-ubootmod
+  UBOOT_CONFIG:=mt7981_cudy_tr3000-v1
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=cudy-tr3000-v1
+  BL2_SOC:=mt7981
+  DEPENDS:=+trusted-firmware-a-mt7981-cudy-tr3000-v1
+endef
+
 define U-Boot/mt7981_glinet_gl-x3000
   NAME:=GL.iNet GL-X3000
   BUILD_SUBTARGET:=filogic
@@ -303,6 +326,18 @@ define U-Boot/mt7981_jcg_q30-pro
   DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
 endef
 
+define U-Boot/mt7981_netis_nx31
+  NAME:=netis NX31
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=netis_nx31
+  UBOOT_CONFIG:=mt7981_netis_nx31
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
+endef
+
 define U-Boot/mt7981_nokia_ea0326gmp
   NAME:=Nokia EA0326GMP
   BUILD_SUBTARGET:=filogic
@@ -364,13 +399,26 @@ define U-Boot/mt7981_rfb-emmc
   DEPENDS:=+trusted-firmware-a-mt7981-emmc-ddr3
 endef
 
+define U-Boot/mt7981_gatonetworks_gdsp
+  NAME:=GatoNetworks GDSP
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=gatonetworks_gdsp
+  UBOOT_CONFIG:=mt7981_gatonetworks_gdsp
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=nor
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7981-nor-ddr3
+  FIP_COMPRESS:=1
+endef
+
 define U-Boot/mt7981_rfb-nor
   NAME:=MT7981 Reference Board
   BUILD_SUBTARGET:=filogic
   BUILD_DEVICES:=mediatek_mt7981-rfb
   UBOOT_CONFIG:=mt7981_nor_rfb
   UBOOT_IMAGE:=u-boot.fip
-  BL2_BOOTDEV:=spim-nand
+  BL2_BOOTDEV:=nor
   BL2_SOC:=mt7981
   BL2_DDRTYPE:=ddr3
   DEPENDS:=+trusted-firmware-a-mt7981-nor-ddr3
@@ -400,6 +448,18 @@ define U-Boot/mt7981_rfb-snfi
   DEPENDS:=+trusted-firmware-a-mt7981-snand-ddr3
 endef
 
+define U-Boot/mt7981_routerich_ax3000
+  NAME:=Routerich AX3000
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=routerich_ax3000-ubootmod
+  UBOOT_CONFIG:=mt7981_routerich_ax3000
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
+endef
+
 define U-Boot/mt7981_qihoo_360t7
   NAME:=Qihoo 360T7
   BUILD_SUBTARGET:=filogic
@@ -545,6 +605,18 @@ define U-Boot/mt7986_jdcloud_re-cp-03
   DEPENDS:=+trusted-firmware-a-mt7986-emmc-ddr4
 endef
 
+define U-Boot/mt7986_mercusys_mr90x-v1
+  NAME:=MERCUSYS MR90X v1
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=mercusys_mr90x-v1-ubi
+  UBOOT_CONFIG:=mt7986_mercusys_mr90x-v1
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand-ubi
+  BL2_SOC:=mt7986
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-ubi-ddr3
+endef
+
 define U-Boot/mt7986_netcore_n60
   NAME:=Netcore N60
   BUILD_SUBTARGET:=filogic
@@ -629,6 +701,18 @@ define U-Boot/mt7986_zyxel_ex5601-t0
   DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-4k-ddr4
 endef
 
+define U-Boot/mt7988_arcadyan_mozart
+  NAME:=Arcadyan Mozart
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=arcadyan_mozart
+  UBOOT_CONFIG:=mt7988a_arcadyan_mozart
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=emmc
+  BL2_SOC:=mt7988
+  BL2_DDRTYPE:=comb
+  DEPENDS:=+trusted-firmware-a-mt7988-emmc-comb
+endef
+
 define U-Boot/mt7988_bananapi_bpi-r4-emmc
   NAME:=BananaPi BPi-R4
   BUILD_SUBTARGET:=filogic
@@ -783,12 +867,16 @@ UBOOT_TARGETS := \
 	mt7628_ravpower_rp-wd009 \
 	mt7629_rfb \
 	mt7981_abt_asr3000 \
+	mt7981_cmcc_a10 \
 	mt7981_cmcc_rax3000m-emmc \
 	mt7981_cmcc_rax3000m-nand \
+	mt7981_cudy_tr3000-v1 \
+	mt7981_gatonetworks_gdsp \
 	mt7981_glinet_gl-x3000 \
 	mt7981_glinet_gl-xe3000 \
 	mt7981_h3c_magic-nx30-pro \
 	mt7981_jcg_q30-pro \
+	mt7981_netis_nx31 \
 	mt7981_nokia_ea0326gmp \
 	mt7981_openwrt_one-snand \
 	mt7981_openwrt_one-nor \
@@ -797,6 +885,7 @@ UBOOT_TARGETS := \
 	mt7981_rfb-nor \
 	mt7981_rfb-sd \
 	mt7981_rfb-snfi \
+	mt7981_routerich_ax3000 \
 	mt7981_qihoo_360t7 \
 	mt7981_xiaomi_mi-router-ax3000t \
 	mt7981_xiaomi_mi-router-wr30u \
@@ -808,6 +897,7 @@ UBOOT_TARGETS := \
 	mt7986_bananapi_bpi-r3-mini-snand \
 	mt7986_glinet_gl-mt6000 \
 	mt7986_jdcloud_re-cp-03 \
+	mt7986_mercusys_mr90x-v1 \
 	mt7986_netcore_n60 \
 	mt7986_tplink_tl-xdr4288 \
 	mt7986_tplink_tl-xdr6086 \
@@ -816,6 +906,7 @@ UBOOT_TARGETS := \
 	mt7986_xiaomi_redmi-router-ax6000 \
 	mt7986_zyxel_ex5601-t0 \
 	mt7986_rfb \
+	mt7988_arcadyan_mozart \
 	mt7988_bananapi_bpi-r4-emmc \
 	mt7988_bananapi_bpi-r4-sdmmc \
 	mt7988_bananapi_bpi-r4-snand \
@@ -831,7 +922,8 @@ UBOOT_TARGETS := \
 UBOOT_CUSTOMIZE_CONFIG := \
 	--disable TOOLS_KWBIMAGE \
 	--disable TOOLS_LIBCRYPTO \
-	--disable TOOLS_MKEFICAPSULE
+	--disable TOOLS_MKEFICAPSULE \
+	--enable SERIAL_RX_BUFFER
 
 ifdef CONFIG_TARGET_mediatek
 UBOOT_MAKE_FLAGS += $(UBOOT_IMAGE:.fip=.bin)

package/boot/uboot-mediatek/patches/010-menu-fix-the-logic-checking-whether-ESC-key-is-press.patch

@@ -0,0 +1,63 @@
+From 72b4ba8417d33516b8489bac3c90dbbbf781a3d2 Mon Sep 17 00:00:00 2001
+From: Weijie Gao <weijie.gao@mediatek.com>
+Date: Tue, 29 Oct 2024 17:47:10 +0800
+Subject: [PATCH 1/3] menu: fix the logic checking whether ESC key is pressed
+
+It's observed that the bootmenu on a serial console sometimes
+incorrectly quitted with superfluous characters filled to command
+line input:
+
+>  *** U-Boot Boot Menu ***
+>
+>      1. Startup system (Default)
+>      2. Upgrade firmware
+>      3. Upgrade ATF BL2
+>      4. Upgrade ATF FIP
+>      5. Load image
+>      0. U-Boot console
+>
+>
+>  Press UP/DOWN to move, ENTER to select, ESC to quit
+>MT7988> [B
+
+Analysis shows it was caused by the wrong logic of bootmenu_loop:
+
+At first the bootmenu_loop received the first ESC char correctly.
+
+However, during the second call to bootmenu_loop, there's no data
+in the UART Rx FIFO. Due to the low baudrate, the second char of
+the down array key sequence hasn't be fully received.
+
+But bootmenu_loop just did a mdelay(10), and then treated it as a
+single ESC key press event. It didn't even try tstc() again after
+the 10ms timeout.
+
+This patch fixes this issue by letting bootmenu_loop check tstc()
+twice.
+
+Tested-By: E Shattow <lucent@gmail.com>
+Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
+---
+ common/menu.c | 5 +++--
+ 1 file changed, 3 insertions(+), 2 deletions(-)
+
+--- a/common/menu.c
++++ b/common/menu.c
+@@ -525,14 +525,15 @@ enum bootmenu_key bootmenu_loop(struct b
+ 				struct cli_ch_state *cch)
+ {
+ 	enum bootmenu_key key;
+-	int c;
++	int c, errchar = 0;
+ 
+ 	c = cli_ch_process(cch, 0);
+ 	if (!c) {
+ 		while (!c && !tstc()) {
+ 			schedule();
+ 			mdelay(10);
+-			c = cli_ch_process(cch, -ETIMEDOUT);
++			c = cli_ch_process(cch, errchar);
++			errchar = -ETIMEDOUT;
+ 		}
+ 		if (!c) {
+ 			c = getchar();

package/boot/uboot-mediatek/patches/011-menu-add-support-to-check-if-menu-needs-to-be-reprin.patch

@@ -0,0 +1,112 @@
+From f1cbdd3330f0055dfbff0ef7d86276c4cc3cff2a Mon Sep 17 00:00:00 2001
+From: Weijie Gao <weijie.gao@mediatek.com>
+Date: Tue, 29 Oct 2024 17:47:16 +0800
+Subject: [PATCH 2/3] menu: add support to check if menu needs to be reprinted
+
+This patch adds a new callback named need_reprint for menu.
+The need_reprint will be called before printing the menu. If the
+callback exists and returns FALSE, menu printing will be canceled.
+
+This is very useful if the menu was not changed. It can save time
+for serial-based menu to handle more input data.
+
+Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
+---
+ boot/pxe_utils.c |  2 +-
+ cmd/bootmenu.c   |  2 +-
+ cmd/eficonfig.c  |  2 +-
+ common/menu.c    | 11 +++++++++++
+ include/menu.h   |  1 +
+ 5 files changed, 15 insertions(+), 3 deletions(-)
+
+--- a/boot/pxe_utils.c
++++ b/boot/pxe_utils.c
+@@ -1449,7 +1449,7 @@ static struct menu *pxe_menu_to_menu(str
+ 	 * Create a menu and add items for all the labels.
+ 	 */
+ 	m = menu_create(cfg->title, DIV_ROUND_UP(cfg->timeout, 10),
+-			cfg->prompt, NULL, label_print, NULL, NULL);
++			cfg->prompt, NULL, label_print, NULL, NULL, NULL);
+ 	if (!m)
+ 		return NULL;
+ 
+--- a/cmd/bootmenu.c
++++ b/cmd/bootmenu.c
+@@ -506,7 +506,7 @@ static enum bootmenu_ret bootmenu_show(i
+ 
+ 	menu = menu_create(NULL, bootmenu->delay, 1, menu_display_statusline,
+ 			   bootmenu_print_entry, bootmenu_choice_entry,
+-			   bootmenu);
++			   NULL, bootmenu);
+ 	if (!menu) {
+ 		bootmenu_destroy(bootmenu);
+ 		return BOOTMENU_RET_FAIL;
+--- a/cmd/eficonfig.c
++++ b/cmd/eficonfig.c
+@@ -443,7 +443,7 @@ efi_status_t eficonfig_process_common(st
+ 		efi_menu->menu_desc = menu_desc;
+ 
+ 	menu = menu_create(NULL, 0, 1, display_statusline, item_data_print,
+-			   item_choice, efi_menu);
++			   item_choice, NULL, efi_menu);
+ 	if (!menu)
+ 		return EFI_INVALID_PARAMETER;
+ 
+--- a/common/menu.c
++++ b/common/menu.c
+@@ -43,6 +43,7 @@ struct menu {
+ 	void (*display_statusline)(struct menu *);
+ 	void (*item_data_print)(void *);
+ 	char *(*item_choice)(void *);
++	bool (*need_reprint)(void *);
+ 	void *item_choice_data;
+ 	struct list_head items;
+ 	int item_cnt;
+@@ -117,6 +118,11 @@ static inline void *menu_item_destroy(st
+  */
+ static inline void menu_display(struct menu *m)
+ {
++	if (m->need_reprint) {
++		if (!m->need_reprint(m->item_choice_data))
++			return;
++	}
++
+ 	if (m->title) {
+ 		puts(m->title);
+ 		putc('\n');
+@@ -362,6 +368,9 @@ int menu_item_add(struct menu *m, char *
+  * item. Returns a key string corresponding to the chosen item or NULL if
+  * no item has been selected.
+  *
++ * need_reprint - If not NULL, will be called before printing the menu.
++ * Returning FALSE means the menu does not need reprint.
++ *
+  * item_choice_data - Will be passed as the argument to the item_choice function
+  *
+  * Returns a pointer to the menu if successful, or NULL if there is
+@@ -371,6 +380,7 @@ struct menu *menu_create(char *title, in
+ 				void (*display_statusline)(struct menu *),
+ 				void (*item_data_print)(void *),
+ 				char *(*item_choice)(void *),
++				bool (*need_reprint)(void *),
+ 				void *item_choice_data)
+ {
+ 	struct menu *m;
+@@ -386,6 +396,7 @@ struct menu *menu_create(char *title, in
+ 	m->display_statusline = display_statusline;
+ 	m->item_data_print = item_data_print;
+ 	m->item_choice = item_choice;
++	m->need_reprint = need_reprint;
+ 	m->item_choice_data = item_choice_data;
+ 	m->item_cnt = 0;
+ 
+--- a/include/menu.h
++++ b/include/menu.h
+@@ -13,6 +13,7 @@ struct menu *menu_create(char *title, in
+ 				void (*display_statusline)(struct menu *),
+ 				void (*item_data_print)(void *),
+ 				char *(*item_choice)(void *),
++				bool (*need_reprint)(void *),
+ 				void *item_choice_data);
+ int menu_default_set(struct menu *m, char *item_key);
+ int menu_get_choice(struct menu *m, void **choice);

package/boot/uboot-mediatek/patches/012-bootmenu-add-reprint-check.patch

@@ -0,0 +1,75 @@
+From 702752cfae954648d6133bdff19283343b3339ef Mon Sep 17 00:00:00 2001
+From: Weijie Gao <weijie.gao@mediatek.com>
+Date: Tue, 29 Oct 2024 17:47:22 +0800
+Subject: [PATCH 3/3] bootmenu: add reprint check
+
+Record the last active menu item and check if it equals to the
+current selected item before reprint.
+
+Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
+---
+ cmd/bootmenu.c | 16 +++++++++++++++-
+ include/menu.h |  1 +
+ 2 files changed, 16 insertions(+), 1 deletion(-)
+
+--- a/cmd/bootmenu.c
++++ b/cmd/bootmenu.c
+@@ -103,11 +103,13 @@ static char *bootmenu_choice_entry(void
+ 
+ 		switch (key) {
+ 		case BKEY_UP:
++			menu->last_active = menu->active;
+ 			if (menu->active > 0)
+ 				--menu->active;
+ 			/* no menu key selected, regenerate menu */
+ 			return NULL;
+ 		case BKEY_DOWN:
++			menu->last_active = menu->active;
+ 			if (menu->active < menu->count - 1)
+ 				++menu->active;
+ 			/* no menu key selected, regenerate menu */
+@@ -133,6 +135,17 @@ static char *bootmenu_choice_entry(void
+ 	return NULL;
+ }
+ 
++static bool bootmenu_need_reprint(void *data)
++{
++	struct bootmenu_data *menu = data;
++	bool need_reprint;
++
++	need_reprint = menu->last_active != menu->active;
++	menu->last_active = menu->active;
++
++	return need_reprint;
++}
++
+ static void bootmenu_destroy(struct bootmenu_data *menu)
+ {
+ 	struct bootmenu_entry *iter = menu->first;
+@@ -332,6 +345,7 @@ static struct bootmenu_data *bootmenu_cr
+ 
+ 	menu->delay = delay;
+ 	menu->active = 0;
++	menu->last_active = -1;
+ 	menu->first = NULL;
+ 
+ 	default_str = env_get("bootmenu_default");
+@@ -506,7 +520,7 @@ static enum bootmenu_ret bootmenu_show(i
+ 
+ 	menu = menu_create(NULL, bootmenu->delay, 1, menu_display_statusline,
+ 			   bootmenu_print_entry, bootmenu_choice_entry,
+-			   NULL, bootmenu);
++			   bootmenu_need_reprint, bootmenu);
+ 	if (!menu) {
+ 		bootmenu_destroy(bootmenu);
+ 		return BOOTMENU_RET_FAIL;
+--- a/include/menu.h
++++ b/include/menu.h
+@@ -40,6 +40,7 @@ int menu_show(int bootdelay);
+ struct bootmenu_data {
+ 	int delay;			/* delay for autoboot */
+ 	int active;			/* active menu entry */
++	int last_active;		/* last active menu entry */
+ 	int count;			/* total count of menu entries */
+ 	struct bootmenu_entry *first;	/* first menu entry */
+ };

package/boot/uboot-mediatek/patches/100-16-cmd-bootmenu-add-ability-to-select-item-by-shortkey.patch

@@ -35,7 +35,7 @@ Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
  		}
  
  		switch (key) {
-@@ -112,6 +113,12 @@ static char *bootmenu_choice_entry(void
+@@ -114,6 +115,12 @@ static char *bootmenu_choice_entry(void
  				++menu->active;
  			/* no menu key selected, regenerate menu */
  			return NULL;
@@ -48,7 +48,7 @@ Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
  		case BKEY_SELECT:
  			iter = menu->first;
  			for (i = 0; i < menu->active; ++i)
-@@ -169,6 +176,9 @@ static int prepare_bootmenu_entry(struct
+@@ -182,6 +189,9 @@ static int prepare_bootmenu_entry(struct
  	unsigned short int i = *index;
  	struct bootmenu_entry *entry = NULL;
  	struct bootmenu_entry *iter = *current;
@@ -58,7 +58,7 @@ Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
  
  	while ((option = bootmenu_getoption(i))) {
  
-@@ -183,11 +193,24 @@ static int prepare_bootmenu_entry(struct
+@@ -196,11 +206,24 @@ static int prepare_bootmenu_entry(struct
  		if (!entry)
  			return -ENOMEM;
  
@@ -84,15 +84,15 @@ Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
  
  		entry->command = strdup(sep + 1);
  		if (!entry->command) {
-@@ -333,6 +356,7 @@ static struct bootmenu_data *bootmenu_cr
- 	menu->delay = delay;
+@@ -347,6 +370,7 @@ static struct bootmenu_data *bootmenu_cr
  	menu->active = 0;
+ 	menu->last_active = -1;
  	menu->first = NULL;
 +	menu->last_choiced = false;
  
  	default_str = env_get("bootmenu_default");
  	if (default_str)
-@@ -368,9 +392,9 @@ static struct bootmenu_data *bootmenu_cr
+@@ -382,9 +406,9 @@ static struct bootmenu_data *bootmenu_cr
  
  		/* Add Quit entry if exiting bootmenu is disabled */
  		if (!IS_ENABLED(CONFIG_BOOTMENU_DISABLE_UBOOT_CONSOLE))
@@ -106,7 +106,7 @@ Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
  			free(entry);
 --- a/common/menu.c
 +++ b/common/menu.c
-@@ -48,6 +48,33 @@ struct menu {
+@@ -49,6 +49,33 @@ struct menu {
  	int item_cnt;
  };
  
@@ -140,7 +140,7 @@ Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
  /*
   * An iterator function for menu items. callback will be called for each item
   * in m, with m, a pointer to the item, and extra being passed to callback. If
-@@ -426,7 +453,7 @@ int menu_destroy(struct menu *m)
+@@ -437,7 +464,7 @@ int menu_destroy(struct menu *m)
  }
  
  enum bootmenu_key bootmenu_autoboot_loop(struct bootmenu_data *menu,
@@ -149,7 +149,7 @@ Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
  {
  	enum bootmenu_key key = BKEY_NONE;
  	int i, c;
-@@ -461,6 +488,19 @@ enum bootmenu_key bootmenu_autoboot_loop
+@@ -472,6 +499,19 @@ enum bootmenu_key bootmenu_autoboot_loop
  				break;
  			default:
  				key = BKEY_NONE;
@@ -169,7 +169,7 @@ Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
  				break;
  			}
  			break;
-@@ -481,7 +521,8 @@ enum bootmenu_key bootmenu_autoboot_loop
+@@ -492,7 +532,8 @@ enum bootmenu_key bootmenu_autoboot_loop
  	return key;
  }
  
@@ -179,7 +179,7 @@ Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
  {
  	enum bootmenu_key key;
  
-@@ -513,6 +554,20 @@ enum bootmenu_key bootmenu_conv_key(int
+@@ -524,6 +565,20 @@ enum bootmenu_key bootmenu_conv_key(int
  	case ' ':
  		key = BKEY_SPACE;
  		break;
@@ -200,15 +200,16 @@ Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
  	default:
  		key = BKEY_NONE;
  		break;
-@@ -522,11 +577,16 @@ enum bootmenu_key bootmenu_conv_key(int
+@@ -533,11 +588,17 @@ enum bootmenu_key bootmenu_conv_key(int
  }
  
  enum bootmenu_key bootmenu_loop(struct bootmenu_data *menu,
 -				struct cli_ch_state *cch)
-+				struct cli_ch_state *cch, int *choice)
++				struct cli_ch_state *cch,
++				int *choice)
  {
  	enum bootmenu_key key;
- 	int c;
+ 	int c, errchar = 0;
  
 +	if (menu->last_choiced) {
 +		menu->last_choiced = false;
@@ -218,7 +219,7 @@ Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
  	c = cli_ch_process(cch, 0);
  	if (!c) {
  		while (!c && !tstc()) {
-@@ -540,7 +600,7 @@ enum bootmenu_key bootmenu_loop(struct b
+@@ -552,7 +613,7 @@ enum bootmenu_key bootmenu_loop(struct b
  		}
  	}
  
@@ -238,7 +239,7 @@ Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
  struct cli_ch_state;
  struct menu;
  
-@@ -19,6 +21,8 @@ int menu_get_choice(struct menu *m, void
+@@ -20,6 +22,8 @@ int menu_get_choice(struct menu *m, void
  int menu_item_add(struct menu *m, char *item_key, void *item_data);
  int menu_destroy(struct menu *m);
  int menu_default_choice(struct menu *m, void **choice);
@@ -247,15 +248,15 @@ Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
  
  /**
   * menu_show() Show a boot menu
-@@ -41,6 +45,7 @@ struct bootmenu_data {
- 	int active;			/* active menu entry */
+@@ -43,6 +47,7 @@ struct bootmenu_data {
+ 	int last_active;		/* last active menu entry */
  	int count;			/* total count of menu entries */
  	struct bootmenu_entry *first;	/* first menu entry */
 +	bool last_choiced;
  };
  
  /** enum bootmenu_key - keys that can be returned by the bootmenu */
-@@ -51,6 +56,7 @@ enum bootmenu_key {
+@@ -53,6 +58,7 @@ enum bootmenu_key {
  	BKEY_SELECT,
  	BKEY_QUIT,
  	BKEY_SAVE,
@@ -263,7 +264,7 @@ Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
  
  	/* 'extra' keys, which are used by menus but not cedit */
  	BKEY_PLUS,
-@@ -81,7 +87,7 @@ enum bootmenu_key {
+@@ -83,7 +89,7 @@ enum bootmenu_key {
   *	anything else: KEY_NONE
   */
  enum bootmenu_key bootmenu_autoboot_loop(struct bootmenu_data *menu,
@@ -272,7 +273,7 @@ Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
  
  /**
   * bootmenu_loop() - handle waiting for a keypress when autoboot is disabled
-@@ -107,7 +113,7 @@ enum bootmenu_key bootmenu_autoboot_loop
+@@ -109,7 +115,7 @@ enum bootmenu_key bootmenu_autoboot_loop
   *	Space: BKEY_SPACE
   */
  enum bootmenu_key bootmenu_loop(struct bootmenu_data *menu,
@@ -281,7 +282,7 @@ Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
  
  /**
   * bootmenu_conv_key() - Convert a U-Boot keypress into a menu key
-@@ -115,6 +121,7 @@ enum bootmenu_key bootmenu_loop(struct b
+@@ -117,6 +123,7 @@ enum bootmenu_key bootmenu_loop(struct b
   * @ichar: Keypress to convert (ASCII, including control characters)
   * Returns: Menu key that corresponds to @ichar, or BKEY_NONE if none
   */

package/boot/uboot-mediatek/patches/211-cmd-bootmenu-custom-title.patch

@@ -1,6 +1,6 @@
 --- a/cmd/bootmenu.c
 +++ b/cmd/bootmenu.c
-@@ -451,7 +451,11 @@ static void menu_display_statusline(stru
+@@ -465,7 +465,11 @@ static void menu_display_statusline(stru
  	printf(ANSI_CURSOR_POSITION, 1, 1);
  	puts(ANSI_CLEAR_LINE);
  	printf(ANSI_CURSOR_POSITION, 2, 3);
@@ -13,7 +13,7 @@
  	puts(ANSI_CLEAR_LINE_TO_END);
  	printf(ANSI_CURSOR_POSITION, 3, 1);
  	puts(ANSI_CLEAR_LINE);
-@@ -536,6 +540,7 @@ static enum bootmenu_ret bootmenu_show(i
+@@ -550,6 +554,7 @@ static enum bootmenu_ret bootmenu_show(i
  		return BOOTMENU_RET_FAIL;
  	}
  
@@ -23,8 +23,8 @@
  			goto cleanup;
 --- a/include/menu.h
 +++ b/include/menu.h
-@@ -45,6 +45,7 @@ struct bootmenu_data {
- 	int active;			/* active menu entry */
+@@ -47,6 +47,7 @@ struct bootmenu_data {
+ 	int last_active;		/* last active menu entry */
  	int count;			/* total count of menu entries */
  	struct bootmenu_entry *first;	/* first menu entry */
 +	char *mtitle;			/* custom menu title */

package/boot/uboot-mediatek/patches/401-update-u7623-defconfig.patch

@@ -187,13 +187,12 @@
  	leds {
  		compatible = "gpio-leds";
  
-@@ -109,6 +122,19 @@
+@@ -109,6 +122,18 @@
  		};
  	};
  
 +	key_pins_a: keys-alt {
 +		mux {
-+			function = "gpio";
 +			groups = "msdc3";
 +		};
 +

package/boot/uboot-mediatek/patches/442-add-bpi-r3-mini.patch

@@ -503,7 +503,7 @@
 +		compatible = "ethernet-phy-id03a2.a411";
 +		reg = <14>;
 +
-+		airoha,rx-pol-reverse;
++		airoha,pnswap-rx;
 +
 +		reset-gpios = <&gpio 49 GPIO_ACTIVE_LOW>;
 +		reset-assert-us = <10000>;

package/boot/uboot-mediatek/patches/445-add-cudy_tr3000-v1.patch

@@ -0,0 +1,330 @@
+--- /dev/null
++++ b/configs/mt7981_cudy_tr3000-v1_defconfig
+@@ -0,0 +1,107 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7981-cudy-tr3000-v1"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_TARGET_MT7981=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_DEBUG_UART=y
++CONFIG_FIT=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981-cudy-tr3000-v1.dtb"
++CONFIG_LOGLEVEL=7
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_LOG=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_PROMPT="MT7981> "
++CONFIG_CMD_CPU=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_UUID=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_DEFAULT_ENV_FILE="cudy_tr3000-v1_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_NETCONSOLE=y
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_CLK=y
++CONFIG_GPIO_HOG=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++# CONFIG_MMC is not set
++CONFIG_MTD=y
++CONFIG_DM_MTD=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTD_UBI_FASTMAP=y
++CONFIG_PHY_FIXED=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PHY=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPIM=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
++CONFIG_LMB_MAX_REGIONS=64
+--- /dev/null
++++ b/arch/arm/dts/mt7981-cudy-tr3000-v1.dts
+@@ -0,0 +1,160 @@
++// SPDX-License-Identifier: GPL-2.0-or-later
++
++/dts-v1/;
++#include "mt7981.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "Cudy TR3000 v1";
++	compatible = "mediatek,mt7981", "mediatek,mt7981-rfb";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x20000000>;
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++
++		button-reset {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
++		};
++
++		button-mode {
++			label = "mode";
++			linux,code = <EV_SW>;
++			linux,input-type = <BTN_0>;
++			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
++			debounce-interval = <60>;
++		};
++	};
++
++	gpio-leds {
++		compatible = "gpio-leds";
++
++		led_status: led-0 {
++			label = "red:power";
++			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
++			default-state = "on";
++		};
++
++		led-1 {
++			label = "white:status";
++			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
++			default-state = "off";
++		};
++	};
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <1>;
++	phy-mode = "gmii";
++	phy-handle = <&phy0>;
++
++	mdio {
++		phy0: ethernet-phy@0 {
++			compatible = "ethernet-phy-id03a2.9461";
++			reg = <0x0>;
++			phy-mode = "gmii";
++		};
++	};
++};
++
++&pinctrl {
++	spi_flash_pins: spi0-pins-func-1 {
++		mux {
++			function = "flash";
++			groups = "spi0", "spi0_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_00>;
++		};
++
++		conf-pd {
++			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
++		};
++	};
++};
++
++&spi0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <2>;
++	sample_sel = <0>;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "bl2";
++				reg = <0x0 0x100000>;
++			};
++
++			partition@100000 {
++				label = "u-boot-env";
++				reg = <0x100000 0x80000>;
++			};
++
++			partition@180000 {
++				label = "factory";
++				reg = <0x180000 0x200000>;
++			};
++
++			partition@380000 {
++				label = "bdinfo";
++				reg = <0x380000 0x40000>;
++			};
++
++			partition@3c0000 {
++				label = "fip";
++				reg = <0x3c0000 0x200000>;
++			};
++
++			partition@5c0000 {
++				label = "ubi";
++				reg = <0x5c0000 0x7a40000>;
++				compatible = "linux,ubi";
++			};
++		};
++	};
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&watchdog {
++	status = "disabled";
++};
+--- /dev/null
++++ b/cudy_tr3000-v1_env
+@@ -0,0 +1,54 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-cudy_tr3000-v1-ubootmod-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-cudy_tr3000-v1-ubootmod-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-cudy_tr3000-v1-ubootmod-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-cudy_tr3000-v1-ubootmod-squashfs-sysupgrade.itb
++bootled_pwr=red:power
++bootled_rec=white:status
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic || run ubi_format
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-mediatek/patches/445-add-netis-nx31.patch

@@ -0,0 +1,334 @@
+--- /dev/null
++++ b/configs/mt7981_netis_nx31_defconfig
+@@ -0,0 +1,106 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7981-netis_nx31"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_TARGET_MT7981=y
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_PRE_CON_BUF_ADDR=0x4007ef00
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_DEBUG_UART=y
++CONFIG_FIT=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981-netis_nx31.dtb"
++CONFIG_LOGLEVEL=7
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_LOG=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_PROMPT="MT7981> "
++CONFIG_CMD_CPU=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_UUID=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_DEFAULT_ENV_FILE="defenvs/netis_nx31_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NETCONSOLE=y
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_CLK=y
++CONFIG_GPIO_HOG=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++# CONFIG_MMC is not set
++CONFIG_MTD=y
++CONFIG_DM_MTD=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTD_UBI_FASTMAP=y
++CONFIG_PHY_FIXED=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_SERIAL_RX_BUFFER=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPIM=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
+--- /dev/null
++++ b/arch/arm/dts/mt7981-netis_nx31.dts
+@@ -0,0 +1,162 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (c) 2025
++ * Author: Mikhail Zhilkin <csharper2005@gmail.com>
++ */
++
++/dts-v1/;
++#include "mt7981.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "netis NX31";
++	compatible = "netis,nx31", "mediatek,mt7981";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x10000000>;
++	};
++
++	keys {
++		compatible = "gpio-keys";
++
++		button-0 {
++			label = "mesh";
++			linux,code = <BTN_0>;
++			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
++		};
++
++		button-1 {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		led-0 {
++			label = "blue:wlan2g";
++			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
++		};
++
++		led-1 {
++			label = "blue:status";
++			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
++		};
++
++		led-2 {
++			label = "blue:wan";
++			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
++		};
++
++		led-3 {
++			label = "blue:wlan5g";
++			gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&pinctrl {
++	spi_flash_pins: spi0-pins-func-1 {
++		mux {
++			function = "flash";
++			groups = "spi0", "spi0_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
++		};
++
++		conf-pd {
++			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
++		};
++	};
++};
++
++&spi0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <2>;
++	sample_sel = <0>;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "BL2";
++				reg = <0x0 0x100000>;
++			};
++
++			partition@100000 {
++				label = "u-boot-env (unused)";
++				reg = <0x100000 0x80000>;
++			};
++
++			partition@160000 {
++				label = "Factory";
++				reg = <0x180000 0x200000>;
++			};
++
++			partition@380000 {
++				label = "FIP";
++				reg = <0x380000 0x200000>;
++			};
++
++			partition@580000 {
++				label = "ubi";
++				reg = <0x580000 0x7a80000>;
++			};
++		};
++	};
++};
++
++&watchdog {
++	status = "disabled";
++};
+--- /dev/null
++++ b/defenvs/netis_nx31_env
+@@ -0,0 +1,57 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootcmd=run check_buttons ; if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-netis_nx31-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-netis_nx31-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-netis_nx31-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-netis_nx31-squashfs-sysupgrade.itb
++bootled_status=blue:status
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_status on ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_status on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led bootled_status off
++boot_recovery=led $bootled_status on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led bootled_status off
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=led $bootled_status on ; while true ; do run boot_tftp ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++check_buttons=if button reset ; then run boot_tftp ; fi
++ethaddr_factory=mtd read Factory 0x40080000 0x1e0000 0x20000 && env readmem -b ethaddr 0x4009ef20 0x6 ; setenv ethaddr_factory
++part_default=production
++part_recovery=recovery
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase FIP && mtd write FIP $loadaddr
++mtd_write_bl2=mtd erase BL2 && mtd write BL2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic || run ubi_format
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-mediatek/patches/446-add-cmcc_a10.patch

@@ -0,0 +1,327 @@
+--- /dev/null
++++ b/configs/mt7981_cmcc_a10_defconfig
+@@ -0,0 +1,107 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7981-cmcc-a10"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_TARGET_MT7981=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_DEBUG_UART=y
++CONFIG_FIT=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981-cmcc-a10.dtb"
++CONFIG_LOGLEVEL=7
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_LOG=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_PROMPT="MT7981> "
++CONFIG_CMD_CPU=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_UUID=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_DEFAULT_ENV_FILE="cmcc_a10_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_NETCONSOLE=y
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_CLK=y
++CONFIG_GPIO_HOG=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++# CONFIG_MMC is not set
++CONFIG_MTD=y
++CONFIG_DM_MTD=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTD_UBI_FASTMAP=y
++CONFIG_PHY_FIXED=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PHY=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPIM=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
++CONFIG_LMB_MAX_REGIONS=64
+--- /dev/null
++++ b/arch/arm/dts/mt7981-cmcc-a10.dts
+@@ -0,0 +1,157 @@
++// SPDX-License-Identifier: GPL-2.0-or-later
++
++/dts-v1/;
++#include "mt7981.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "CMCC A10";
++	compatible = "mediatek,mt7981", "mediatek,mt7981-rfb";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x10000000>;
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++
++		button-reset {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
++		};
++
++		button-wps {
++			label = "wps";
++			linux,code = <KEY_WPS_BUTTON>;
++			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	gpio-leds {
++		compatible = "gpio-leds";
++
++		led-0 {
++			label = "blue:status";
++			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
++			default-state = "off";
++		};
++
++		running_led: led-1 {
++			label = "green:status";
++			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
++			default-state = "off";
++		};
++
++		boot_led: led-2 {
++			label = "red:status";
++			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
++			default-state = "on";
++		};
++	};
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&pinctrl {
++	spi_flash_pins: spi0-pins-func-1 {
++		mux {
++			function = "flash";
++			groups = "spi0", "spi0_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_00>;
++		};
++
++		conf-pd {
++			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
++		};
++	};
++};
++
++&spi0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <2>;
++	sample_sel = <0>;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "bl2";
++				reg = <0x0 0x100000>;
++			};
++
++			partition@100000 {
++				label = "u-boot-env";
++				reg = <0x100000 0x80000>;
++			};
++
++			partition@180000 {
++				label = "factory";
++				reg = <0x180000 0x200000>;
++			};
++
++			partition@380000 {
++				label = "fip";
++				reg = <0x380000 0x200000>;
++			};
++
++			partition@580000 {
++				label = "ubi";
++				reg = <0x580000 0x7a80000>;
++				compatible = "linux,ubi";
++			};
++		};
++	};
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&watchdog {
++	status = "disabled";
++};
+--- /dev/null
++++ b/cmcc_a10_env
+@@ -0,0 +1,54 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-cmcc_a10-ubootmod-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-cmcc_a10-ubootmod-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-cmcc_a10-ubootmod-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-cmcc_a10-ubootmod-squashfs-sysupgrade.itb
++bootled_pwr=red:status
++bootled_rec=blue:status
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic || run ubi_format
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-mediatek/patches/453-add-openwrt-one.patch

@@ -519,7 +519,7 @@
 +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"
 --- /dev/null
 +++ b/openwrt-one-spi-nand_env
-@@ -0,0 +1,60 @@
+@@ -0,0 +1,61 @@
 +ethaddr_factory=mtd read factory 0x46000000 0x0 0x20000 && env readmem -b ethaddr 0x4600002a 0x6 ; setenv ethaddr_factory
 +ipaddr=192.168.11.11
 +serverip=192.168.11.23
@@ -561,6 +561,7 @@
 +check_buttons=if button front ; then run boot_recovery ; run boot_tftp ; run led_loop_error ; else if button back ; then ; run usb_recover ; run led_loop_error ; fi ; fi
 +led_boot=led green on ; led white on ; led red on
 +led_done=led green on ; led white off ; led red off
++led_loop_done=led white off ; led green on ; echo done ; while true ; do  sleep 1 ; done
 +led_loop_error=led white off ; led green off ; while true ; do led red on ; sleep 1 ; led red off ; sleep 1 ; done
 +led_start=led white on ; led green off ; led red off
 +preboot=run led_boot

package/boot/uboot-mediatek/patches/456-add-arcadyan-mozart.patch

@@ -0,0 +1,308 @@
+--- /dev/null
++++ b/configs/mt7988a_arcadyan_mozart_defconfig
+@@ -0,0 +1,119 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_ENV_SIZE=0x40000
++CONFIG_ENV_OFFSET=0x400000
++CONFIG_DEFAULT_DEVICE_TREE="mt7988a-arcadyan-mozart"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_TARGET_MT7988=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_DEBUG_UART_BASE=0x11000000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_ENV_OFFSET_REDUND=0x440000
++CONFIG_SYS_LOAD_ADDR=0x50000000
++CONFIG_PCI=y
++CONFIG_DEBUG_UART=y
++CONFIG_AHCI=y
++CONFIG_FIT=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_OF_SYSTEM_SETUP=y
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7988a-arcadyan-mozart.dtb"
++CONFIG_SYS_CBSIZE=512
++CONFIG_SYS_PBSIZE=1049
++CONFIG_LOGLEVEL=7
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_LOG=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_PROMPT="MT7988> "
++CONFIG_CMD_CPU=y
++CONFIG_CMD_LICENSE=y
++# CONFIG_CMD_BOOTEFI_BOOTMGR is not set
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_MMC=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_PCI=y
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_USB=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_UUID=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_EXT4=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_MMC=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_DEFAULT_ENV_FILE="arcadyan_mozart_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_NETCONSOLE=y
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_CLK=y
++CONFIG_GPIO_HOG=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_SUPPORT_EMMC_BOOT=y
++CONFIG_MMC_HS200_SUPPORT=y
++CONFIG_MMC_MTK=y
++CONFIG_PHY_FIXED=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7988=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_MTK=y
++CONFIG_RAM=y
++CONFIG_SCSI=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
++CONFIG_LMB_MAX_REGIONS=64
+--- /dev/null
++++ b/arcadyan_mozart_env
+@@ -0,0 +1,55 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x50000000
++bootargs=console=ttyS0,115200n1 pci=pcie_bus_perf root=/dev/fit0 rootwait
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_emmc ; fi
++bootconf=config-1
++bootconf_extra=
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-arcadyan_mozart-initramfs.itb
++bootfile_bl2=openwrt-mediatek-filogic-arcadyan_mozart-emmc-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-arcadyan_mozart-emmc-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-arcadyan_mozart-squashfs-sysupgrade.itb
++bootled_pwr=blue:status
++bootled_rec=red:status
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )  [eMMC]
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from eMMC.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from eMMC.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to eMMC.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to eMMC.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run emmc_read_production && bootm $loadaddr#$bootconf#$bootconf_extra ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run emmc_read_recovery && bootm $loadaddr#$bootconf#$bootconf_extra ; led $bootled_rec off
++boot_emmc=run boot_production ; run boot_recovery
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run emmc_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf#$bootconf_extra ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run emmc_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run emmc_write_fip
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run emmc_write_bl2
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$image_size && mmc write $loadaddr 0x$part_addr 0x$image_size
++mmc_read_vol=mmc read $loadaddr $part_addr 0x100 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr 0x$part_addr 0x$image_size && setexpr filesize $image_size * 0x200
++part_default=production
++part_recovery=recovery
++reset_factory=eraseenv && reset
++emmc_read_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_read_vol
++emmc_read_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_read_vol
++emmc_write_bl2=mmc partconf 0 1 1 1 && mmc erase 0x0 0x400 && mmc write $fileaddr 0x0 0x400 ; mmc partconf 0 1 1 0
++emmc_write_fip=mmc erase 0x3400 0x2000 && mmc write $fileaddr 0x3400 0x2000 && mmc erase 0x2000 0x800
++emmc_write_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol
++emmc_write_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol
++_init_env=setenv _init_env ; setenv _create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"
+--- /dev/null
++++ b/arch/arm/dts/mt7988a-arcadyan-mozart.dts
+@@ -0,0 +1,125 @@
++// SPDX-License-Identifier: GPL-2.0
++
++/dts-v1/;
++#include "mt7988.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++	model = "MediaTek / Arcadyan - Mozart";
++	compatible = "arcadyan,mozart", "mediatek,mt7988";
++
++	chosen {
++		stdout-path = &uart0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0 0x40000000 0 0x40000000>;
++	};
++
++	reg_3p3v: regulator-3p3v {
++		compatible = "regulator-fixed";
++		regulator-name = "fixed-3.3V";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		regulator-boot-on;
++		regulator-always-on;
++	};
++
++	reg_1p8v: regulator-1p8v {
++		compatible = "regulator-fixed";
++		regulator-name = "fixed-1.8V";
++		regulator-min-microvolt = <1800000>;
++		regulator-max-microvolt = <1800000>;
++		regulator-boot-on;
++		regulator-always-on;
++	};
++
++	keys {
++		compatible = "gpio-keys";
++
++		wps {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&gpio 143 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		led-red {
++			label = "red:status";
++			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
++		};
++
++		led-green {
++			label = "blue:status";
++			gpios = <&gpio 30 GPIO_ACTIVE_HIGH>;
++		};
++		
++		led-blue {
++			label = "blue:status";
++			gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
++		};
++	};
++};
++
++&uart0 {
++	status = "okay";
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "usxgmii";
++	mediatek,switch = "mt7988";
++
++	fixed-link {
++		speed = <1000>;
++		full-duplex;
++		pause;
++	};
++};
++
++&pinctrl {
++	mmc0_pins_default: mmc0default {
++		mux {
++			function = "flash";
++			groups =  "emmc_51";
++		};
++
++		conf-cmd-dat {
++			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
++			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
++			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
++			input-enable;
++		};
++
++		conf-clk {
++			pins = "EMMC_CK";
++		};
++
++		conf-dsl {
++			pins = "EMMC_DSL";
++		};
++
++		conf-rst {
++			pins = "EMMC_RSTB";
++		};
++	};
++};
++
++&mmc0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&mmc0_pins_default>;
++	max-frequency = <52000000>;
++	bus-width = <8>;
++	cap-mmc-highspeed;
++	cap-mmc-hw-reset;
++	vmmc-supply = <&reg_3p3v>;
++	vqmmc-supply = <&reg_1p8v>;
++	non-removable;
++	status = "okay";
++};

package/boot/uboot-mediatek/patches/457-initialized-the-watchdog-subsystem-later.patch

@@ -0,0 +1,54 @@
+From 9c1ad8a18ac1a20aee7a617964bcae3e90dac700 Mon Sep 17 00:00:00 2001
+From: Enrico Mioso <mrkiko.rs@gmail.com>
+Date: Wed, 23 Oct 2024 17:46:35 +0200
+Subject: [PATCH] uboot-mediatek: initialized the watchdog subsystem later
+
+Initialize the watchdog subsystem later during initialization, to allow for
+the gpio-wdt driver to work.
+
+Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
+---
+ common/board_r.c | 11 ++++-------
+ 1 file changed, 4 insertions(+), 7 deletions(-)
+
+--- a/common/board_r.c
++++ b/common/board_r.c
+@@ -663,19 +663,13 @@ static init_fnc_t init_sequence_r[] = {
+ 	serial_initialize,
+ 	initr_announce,
+ 	dm_announce,
+-#if CONFIG_IS_ENABLED(WDT)
+-	initr_watchdog,
+-#endif
+-	INIT_FUNC_WATCHDOG_RESET
+ 	arch_initr_trap,
+ #if defined(CONFIG_BOARD_EARLY_INIT_R)
+ 	board_early_init_r,
+ #endif
+-	INIT_FUNC_WATCHDOG_RESET
+ #ifdef CONFIG_POST
+ 	post_output_backlog,
+ #endif
+-	INIT_FUNC_WATCHDOG_RESET
+ #if defined(CONFIG_PCI_INIT_R) && defined(CONFIG_SYS_EARLY_PCI_INIT)
+ 	/*
+ 	 * Do early PCI configuration _before_ the flash gets initialised,
+@@ -690,7 +684,6 @@ static init_fnc_t init_sequence_r[] = {
+ #ifdef CONFIG_MTD_NOR_FLASH
+ 	initr_flash,
+ #endif
+-	INIT_FUNC_WATCHDOG_RESET
+ #if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_X86)
+ 	/* initialize higher level parts of CPU like time base and timers */
+ 	cpu_init_r,
+@@ -719,6 +712,10 @@ static init_fnc_t init_sequence_r[] = {
+ #ifdef CONFIG_PVBLOCK
+ 	initr_pvblock,
+ #endif
++#if CONFIG_IS_ENABLED(WDT)
++	initr_watchdog,
++#endif
++	INIT_FUNC_WATCHDOG_RESET
+ 	initr_env,
+ #ifdef CONFIG_SYS_MALLOC_BOOTPARAMS
+ 	initr_malloc_bootparams,

package/boot/uboot-mediatek/patches/458-add-GatoNetworks-GDSP.patch

@@ -0,0 +1,406 @@
+From 57d0f608d925cb688b5c9b71512fca7d228f07f6 Mon Sep 17 00:00:00 2001
+From: Enrico Mioso <mrkiko.rs@gmail.com>
+Date: Wed, 23 Oct 2024 20:39:28 +0200
+Subject: [PATCH] add GatoNetworks GDSP
+
+Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
+---
+ arch/arm/dts/mt7981-gatonetworks_gdsp.dts  | 200 +++++++++++++++++++++
+ configs/mt7981_gatonetworks_gdsp_defconfig | 144 +++++++++++++++
+ gatonetworks_gdsp_env                      |  38 ++++
+ 3 files changed, 382 insertions(+)
+ create mode 100644 arch/arm/dts/mt7981-gatonetworks_gdsp.dts
+ create mode 100644 configs/mt7981_gatonetworks_gdsp_defconfig
+ create mode 100644 gatonetworks_gdsp_env
+
+--- /dev/null
++++ b/arch/arm/dts/mt7981-gatonetworks_gdsp.dts
+@@ -0,0 +1,200 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++
++/dts-v1/;
++#include "mt7981.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "GatoNetworks GDSP";
++	compatible = "gatonetworks,gdsp", "mediatek,mt7981";
++  chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++  };
++
++	memory {
++		device_type = "memory";
++		reg = <0x40000000 0x10000000>;
++	};
++
++	keys {
++		compatible = "gpio-keys";
++
++		reset {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		sim1 {
++			label = "sim1";
++			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
++		};
++
++		sim2 {
++			label = "sim2";
++			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
++		};
++
++		sg1 {
++			label = "sg1";
++			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
++		};
++
++		sg2 {
++			label = "sg2";
++			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
++		};
++
++		sg3 {
++			label = "sg3";
++			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
++		};
++
++		sg4 {
++			label = "sg4";
++			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
++		};
++
++		sg5 {
++			label = "sg5";
++			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
++		};
++
++		sg6 {
++			label = "sg6";
++			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
++		};
++	};
++	gpio-watchdog {
++		compatible = "linux,wdt-gpio";
++		gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
++		hw_algo = "toggle";
++		hw_margin_ms = <25000>;
++		always-running;
++		u-boot,autostart;
++	};
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&spi2 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi2_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <2>;
++	sample_sel = <0>;
++
++	flash@0 {
++		compatible = "jedec,spi-nor";
++		reg = <0>;
++		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@00000 {
++				label = "BL2";
++				reg = <0x00000 0x0040000>;
++				read-only;
++			};
++
++			partition@40000 {
++				label = "u-boot-env";
++				reg = <0x40000 0x0010000>;
++			};
++
++			partition@50000 {
++				label = "Factory";
++				reg = <0x50000 0x00B0000>;
++				read-only;
++			};
++
++			partition@100000 {
++				label = "FIP";
++				reg = <0x100000 0x0080000>;
++			};
++
++			partition@180000 {
++				label = "firmware";
++				reg = <0x180000 0x1E80000>;
++			};
++		};
++	};
++};
++
++&pinctrl {
++	uart1_pins: uart1-pins {
++		mux {
++			function = "uart";
++			groups = "uart1_0";
++		};
++	};
++
++	uart2_pins: uart2-pins {
++		mux {
++			function = "uart";
++			groups = "uart2_0_tx_rx";
++		};
++	};
++
++	spi2_flash_pins: spi2-pins {
++		mux {
++			function = "spi";
++			groups = "spi2", "spi2_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
++		};
++
++		conf-pd {
++			pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
++		};
++	};
++};
++
++&uart0 {
++	status = "okay";
++};
++
++&uart1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart1_pins>;
++	status = "okay";
++};
++
++&uart2 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart2_pins>;
++	status = "okay";
++};
+--- /dev/null
++++ b/configs/mt7981_gatonetworks_gdsp_defconfig
+@@ -0,0 +1,144 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_ENV_SIZE=0x10000
++CONFIG_ENV_OFFSET=0x0
++CONFIG_DEFAULT_DEVICE_TREE="mt7981-gatonetworks_gdsp"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_TARGET_MT7981=y
++CONFIG_WATCHDOG_TIMEOUT_MSECS=25000
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_DEBUG_UART=y
++CONFIG_FIT=y
++CONFIG_SPI_BOOT=y
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_USE_PREBOOT=y
++CONFIG_DEFAULT_FDT_FILE="mt7981-gatonetworks_gdsp"
++CONFIG_SYS_CBSIZE=512
++CONFIG_SYS_PBSIZE=1049
++CONFIG_LOGLEVEL=7
++CONFIG_CONSOLE_MUX=y
++CONFIG_LOG=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_PROMPT="GDSP> "
++CONFIG_SYS_MAXARGS=16
++CONFIG_CMD_BDINFO_EXTRA=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_HISTORY=y
++CONFIG_CMD_LICENSE=y
++# CONFIG_BOOTM_NETBSD is not set
++# CONFIG_BOOTM_PLAN9 is not set
++# CONFIG_BOOTM_RTEMS is not set
++# CONFIG_BOOTM_VXWORKS is not set
++# CONFIG_CMD_BOOTEFI_BOOTMGR is not set
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_CALLBACK=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_CRC32_VERIFY=y
++CONFIG_LOOPW=y
++CONFIG_CMD_MEMINFO=y
++CONFIG_CMD_MEMTEST=y
++CONFIG_CMD_STRINGS=y
++# CONFIG_CMD_UNLZ4 is not set
++# CONFIG_CMD_UNZIP is not set
++CONFIG_CMD_DM=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPIO_READ=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_MTD=y
++# CONFIG_CMD_NAND_EXT is not set
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_CAT=y
++CONFIG_CMD_SETEXPR_FMT=y
++CONFIG_CMD_XXD=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_TFTPPUT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_CACHE=y
++# CONFIG_CMD_EFICONFIG is not set
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_UUID=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_MTD=y
++CONFIG_ENV_MTD_NAME="u-boot-env"
++CONFIG_ENV_SIZE_REDUND=0x0
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_DEFAULT_ENV_FILE="gatonetworks_gdsp_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_NETCONSOLE=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_CLK=y
++CONFIG_GPIO_HOG=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++# CONFIG_MMC is not set
++CONFIG_MTD=y
++CONFIG_DM_MTD=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_DM_SPI_FLASH=y
++CONFIG_SPI_FLASH_SFDP_SUPPORT=y
++CONFIG_SPI_FLASH_EON=y
++CONFIG_SPI_FLASH_GIGADEVICE=y
++CONFIG_SPI_FLASH_ISSI=y
++CONFIG_SPI_FLASH_MACRONIX=y
++CONFIG_SPI_FLASH_SPANSION=y
++CONFIG_SPI_FLASH_STMICRO=y
++CONFIG_SPI_FLASH_WINBOND=y
++CONFIG_SPI_FLASH_XMC=y
++CONFIG_SPI_FLASH_XTX=y
++CONFIG_SPI_FLASH_MTD=y
++CONFIG_UBI_SILENCE_MSG=y
++CONFIG_PHY_FIXED=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_MTK=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPIM=y
++CONFIG_USB=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_XHCI_MTK=y
++CONFIG_USB_STORAGE=y
++CONFIG_WDT=y
++CONFIG_WDT_GPIO=y
++CONFIG_UBIFS_SILENCE_MSG=y
++CONFIG_HEXDUMP=y
++CONFIG_LMB_MAX_REGIONS=64
+--- /dev/null
++++ b/gatonetworks_gdsp_env
+@@ -0,0 +1,38 @@
++load_factory_data=if env exists factory_data_present ; then else mtd read Factory $loadaddr 0x0 0x1000 ; setenv factory_data_present 1 ; fi
++lan_mac_factory=run load_factory_data ; setexpr macoffs $loadaddr + 0x2a ; env readmem -b lan_mac $macoffs 0x6 ; setenv lan_mac_factory ; setenv macoffs
++wan_mac_factory=run load_factory_data ; setexpr macoffs $loadaddr + 0x24 ; env readmem -b wan_mac $macoffs 0x6 ; setenv wan_mac_factory ; setenv macoffs
++label_mac_factory=run load_factory_data ; setexpr macoffs $loadaddr + 0x4 ; env readmem -b label_mac $macoffs 0x6 ; setenv label_mac_factory ; setenv macoffs
++ethaddr_factory=setenv ethaddr $lan_mac ; setenv ethaddr_factory
++wifi_mac_factory=setenv wifi_mac $label_mac ; setenv wifi_mac_factory
++env_cleanup=setenv load_factory_data ; setenv factory_data_present ; setenv env_cleanup
++ipaddr=192.168.1.1
++serverip=192.168.1.10
++loadaddr=0x46000000
++bootcmd=run boot_nor
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-gatonetworks_gdsp-initramfs-kernel.bin
++bootfile_upg=openwrt-mediatek-filogic-gatonetworks_gdsp-squashfs-sysupgrade.bin
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot system from flash.=run boot_nor ; run bootmenu_confirm_return
++bootmenu_3=Load system via TFTP then write to flash.=run boot_tftp_sysupgrade ; run bootmenu_confirm_return
++bootmenu_4=Reset all settings to factory defaults.=run reset_factory ; reset
++bootmenu_5=Reboot.=reset
++boot_first=if button reset ; then run boot_tftp ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_tftp_forever
++boot_nor=mtd read firmware ${loadaddr} ; bootm $loadaddr
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr
++boot_tftp_forever=while true ; do run boot_tftp ; sleep 1 ; done
++boot_tftp_sysupgrade=tftpboot $loadaddr $bootfile_upg && iminfo $loadaddr && run nor_write_production
++reset_factory=env default -a && saveenv && reset
++nor_pad_size=setexpr image_eb $filesize / 0x1000 ; setexpr tmp1 image_size % 0x1000 ; test 0x$tmp1 -gt 0 && setexpr image_eb $image_eb + 1 ; setexpr image_eb $image_eb * 0x1000
++nor_write_production=run nor_pad_size ; test 0x$image_eb -le 0x1e80000 && mtd erase firmware 0x0 0x$image_eb && mtd write firmware $loadaddr 0x0 $filesize
++_init_env=setenv _init_env ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run lan_mac_factory ; run wan_mac_factory ; run label_mac_factory ; run env_cleanup ; run ethaddr_factory ; run wifi_mac_factory ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-mediatek/patches/459-add-mercusys-mr90x-v1.patch

@@ -0,0 +1,343 @@
+--- /dev/null
++++ b/configs/mt7986_mercusys_mr90x-v1_defconfig
+@@ -0,0 +1,107 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7986b-mercusys_mr90x-v1"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_TARGET_MT7986=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007ef00
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_DEBUG_UART=y
++CONFIG_FIT=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986b-mercusys_mr90x-v1.dtb"
++CONFIG_LOGLEVEL=7
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_LOG=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_PROMPT="MT7986> "
++CONFIG_CMD_CPU=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_UUID=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_DEFAULT_ENV_FILE="mercusys_mr90x-v1_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_NETCONSOLE=y
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_CLK=y
++CONFIG_GPIO_HOG=y
++# CONFIG_I2C is not set
++# CONFIG_MMC is not set
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_MTD=y
++CONFIG_DM_MTD=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTD_UBI_FASTMAP=y
++CONFIG_PHY_FIXED=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PHY=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7986=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPIM=y
++CONFIG_RANDOM_UUID=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
++CONFIG_LMB_MAX_REGIONS=64
+--- /dev/null
++++ b/arch/arm/dts/mt7986b-mercusys_mr90x-v1.dts
+@@ -0,0 +1,174 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (c) 2024
++ * Author: Mikhail Zhilkin <csharper2005@gmail.com>
++ */
++
++/dts-v1/;
++#include "mt7986.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "MERCUSYS MR90X v1";
++	compatible = "mediatek,mt7986", "mediatek,mt7986-rfb";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x20000000>;
++	};
++
++	keys {
++		compatible = "gpio-keys";
++
++		reset {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		led-0 {
++			label = "green:lan2";
++			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
++		};
++
++		led-1 {
++			label = "green:lan1";
++			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
++		};
++
++		led-2 {
++			label = "green:lan0";
++			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
++		};
++
++		led-3 {
++			label = "green:wan";
++			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
++		};
++
++		led-4 {
++			label = "amber:status";
++			gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
++		};
++
++		led_status_green: led-5 {
++			label = "green:status";
++			gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
++		};
++	};
++};
++
++&uart0 {
++	status = "okay";
++};
++
++&uart1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart1_pins>;
++	status = "disabled";
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&pinctrl {
++	spi_flash_pins: spi0-pins-func-1 {
++		mux {
++			function = "flash";
++			groups = "spi0", "spi0_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_00>;
++		};
++
++		conf-pd {
++			pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
++		};
++	};
++
++	spic_pins: spi1-pins-func-1 {
++		mux {
++			function = "spi";
++			groups = "spi1_2";
++		};
++	};
++
++	uart1_pins: spi1-pins-func-3 {
++		mux {
++			function = "uart";
++			groups = "uart1_2";
++		};
++	};
++};
++
++&spi0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	tick_dly = <2>;
++	sample_sel = <0>;
++
++	spi_nand@1 {
++		compatible = "spi-nand";
++		reg = <1>;
++		spi-max-frequency = <20000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				reg = <0x0 0x100000>;
++				label = "bl2";
++			};
++
++			partition@100000 {
++				reg = <0x100000 0x100000>;
++				label = "factory";
++			};
++
++			partition@200000 {
++				reg = <0x200000 0x7e00000>;
++				label = "ubi";
++			};
++		};
++	};
++};
++
++&watchdog {
++	status = "disabled";
++};
+--- /dev/null
++++ b/mercusys_mr90x-v1_env
+@@ -0,0 +1,53 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootargs=console=ttyS0,115200n8 console_msg_format=syslog
++bootcmd=run check_buttons ; run boot_production ; run boot_recovery
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-mercusys_mr90x-v1-ubi-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-mercusys_mr90x-v1-ubi-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-mercusys_mr90x-v1-ubi-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-mercusys_mr90x-v1-ubi-squashfs-sysupgrade.itb
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )  [SPI-NAND]
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=noboot=1 ; replacevol=1 ; run boot_tftp_production ; noboot= ; replacevol= ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=noboot=1 ; replacevol=1 ; run boot_tftp_recovery ; noboot= ; replacevol= ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_default=run led_boot ; run bootcmd ; run boot_recovery ; replacevol=1 ; run boot_tftp_forever
++boot_production=run led_boot ; run ubi_read_production && bootm $loadaddr#$bootconf
++boot_recovery=run led_boot ; run ubi_read_recovery && bootm $loadaddr#$bootconf
++boot_tftp=run led_boot ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_forever=run led_boot ; while true ; do run boot_tftp ; sleep 1 ; done
++boot_tftp_production=run led_boot ; tftpboot $loadaddr $bootfile_upg && test $replacevol = 1 && iminfo $loadaddr && run ubi_write_production ; if test $noboot = 1 ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=run led_boot ; tftpboot $loadaddr $bootfile && test $replacevol = 1 && iminfo $loadaddr && run ubi_write_recovery ; if test $noboot = 1 ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_write_fip=run led_boot ; tftpboot $loadaddr $bootfile_fip && run ubi_write_fip && run reset_factory
++boot_tftp_write_bl2=run led_boot ; tftpboot $loadaddr $bootfile_bl2 && run snand_write_bl2
++check_buttons=if button reset ; then run boot_tftp ; fi
++ethaddr_factory=mtd read factory 0x40080000 0x0 0x20000 && env readmem -b ethaddr 0x40088000 0x6 ; setenv ethaddr_factory
++led_boot=led green:status off ; led amber:status on
++reset_factory=mw $loadaddr 0xff 0x1f000 ; ubi write $loadaddr ubootenv 0x1f000 ; ubi write $loadaddr ubootenv2 0x1f000 ; ubi remove rootfs_data
++snand_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr 0x0 0x40000
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x1f000 dynamic ; ubi check ubootenv2 || ubi create ubootenv2 0x1f000 dynamic
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_fip=run ubi_remove_rootfs ; ubi check fip && ubi remove fip ; ubi create fip $filesize static && ubi write $loadaddr fip $filesize
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; bootmenu
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-mediatek/patches/460-add-routerich-ax3000.patch

@@ -0,0 +1,362 @@
+--- /dev/null
++++ b/configs/mt7981_routerich_ax3000_defconfig
+@@ -0,0 +1,108 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7981-routerich_ax3000"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_TARGET_MT7981=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007ef00
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_DEBUG_UART=y
++CONFIG_FIT=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981-routerich_ax3000.dtb"
++CONFIG_LOGLEVEL=7
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_LOG=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_PROMPT="MT7981> "
++CONFIG_CMD_CPU=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_UUID=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_DEFAULT_ENV_FILE="routerich_ax3000_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_NETCONSOLE=y
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_CLK=y
++CONFIG_GPIO_HOG=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++# CONFIG_MMC is not set
++CONFIG_MTD=y
++CONFIG_DM_MTD=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTD_UBI_FASTMAP=y
++CONFIG_PHY_FIXED=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPIM=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
++CONFIG_LMB_MAX_REGIONS=64
+--- /dev/null
++++ b/arch/arm/dts/mt7981-routerich_ax3000.dts
+@@ -0,0 +1,187 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (c) 2022 MediaTek Inc.
++ * Author: Sam Shih <sam.shih@mediatek.com>
++ */
++
++/dts-v1/;
++#include "mt7981.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "Routerich AX3000";
++	compatible = "routerich,ax3000", "mediatek,mt7981";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x10000000>;
++	};
++
++	keys {
++		compatible = "gpio-keys";
++
++		button-0 {
++			label = "mesh";
++			linux,code = <BTN_0>;
++			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
++		};
++
++		button-1 {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		led-0 {
++			label = "red:wlan5g";
++			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
++		};
++
++		led-1 {
++			label = "red:wan";
++			gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
++		};
++
++		led-2 {
++			label = "blue:power";
++			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
++		};
++
++		led-3 {
++			label = "blue:lan1";
++			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
++		};
++
++		led-4 {
++			label = "blue:lan2";
++			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
++		};
++
++		led-5 {
++			label = "blue:lan3";
++			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
++		};
++
++		led-6 {
++			label = "blue:wan";
++			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
++		};
++
++		led-7 {
++			label = "blue:wlan2g";
++			gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
++		};
++
++		led-8 {
++			label = "blue:mesh";
++			gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&pinctrl {
++	spi_flash_pins: spi0-pins-func-1 {
++		mux {
++			function = "flash";
++			groups = "spi0", "spi0_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
++		};
++
++		conf-pd {
++			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
++		};
++	};
++};
++
++&spi0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <2>;
++	sample_sel = <0>;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "bl2";
++				reg = <0x0 0x100000>;
++			};
++
++			partition@100000 {
++				label = "uboot-env-orig";
++				reg = <0x100000 0x80000>;
++			};
++
++			partition@160000 {
++				label = "Factory";
++				reg = <0x180000 0x200000>;
++			};
++
++			partition@380000 {
++				label = "fip";
++				reg = <0x380000 0x200000>;
++			};
++
++			partition@580000 {
++				label = "ubi";
++				reg = <0x580000 0x7a80000>;
++			};
++		};
++	};
++};
++
++&watchdog {
++	status = "disabled";
++};
+--- /dev/null
++++ b/routerich_ax3000_env
+@@ -0,0 +1,58 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootcmd=run check_buttons ; if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-routerich_ax3000-ubootmod-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-routerich_ax3000-ubootmod-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-routerich_ax3000-ubootmod-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-routerich_ax3000-ubootmod-squashfs-sysupgrade.itb
++bootled_pwr=blue:power
++bootled_rec=blue:power
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++check_buttons=if button reset ; then run boot_tftp ; fi
++ethaddr_factory=mtd read Factory 0x40080000 0x0 0x20000 && env readmem -b ethaddr 0x40080004 0x6 ; setenv ethaddr_factory
++part_default=production
++part_recovery=recovery
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic || run ubi_format
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-rockchip/Makefile

@@ -136,6 +136,20 @@ define U-Boot/nanopi-r4s-rk3399
     friendlyarm_nanopi-r4s-enterprise
 endef
 
+define U-Boot/rock-4c-plus-rk3399
+  $(U-Boot/rk3399/Default)
+  NAME:=ROCK 4C+
+  BUILD_DEVICES:= \
+    radxa_rock-4c-plus
+endef
+
+define U-Boot/rock-4se-rk3399
+  $(U-Boot/rk3399/Default)
+  NAME:=ROCK 4SE
+  BUILD_DEVICES:= \
+    radxa_rock-4se
+endef
+
 define U-Boot/rock-pi-4-rk3399
   $(U-Boot/rk3399/Default)
   NAME:=Rock Pi 4
@@ -300,6 +314,8 @@ endef
 UBOOT_TARGETS := \
   nanopc-t4-rk3399 \
   nanopi-r4s-rk3399 \
+  rock-4c-plus-rk3399 \
+  rock-4se-rk3399 \
   rock-pi-4-rk3399 \
   rockpro64-rk3399 \
   rock-pi-s-rk3308 \

package/boot/uboot-rockchip/patches/002-scripts-dtc-pylibfdt-libfdt-i_shipped-Use-SWIG_AppendOutp.patch

@@ -0,0 +1,55 @@
+From a63456b9191fae2fe49f4b121e025792022e3950 Mon Sep 17 00:00:00 2001
+From: Markus Volk <f_l_k@t-online.de>
+Date: Wed, 30 Oct 2024 06:07:16 +0100
+Subject: [PATCH] scripts/dtc/pylibfdt/libfdt.i_shipped: Use SWIG_AppendOutput
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Swig has changed language specific AppendOutput functions. The helper
+macro SWIG_AppendOutput remains unchanged. Use that instead
+of SWIG_Python_AppendOutput, which would require an extra parameter
+since swig 4.3.0.
+
+/home/flk/poky/build-test/tmp/work/qemux86_64-poky-linux/u-boot/2024.10/git/arch/x86/cpu/u-boot-64.lds
+| scripts/dtc/pylibfdt/libfdt_wrap.c: In function ‘_wrap_fdt_next_node’:
+| scripts/dtc/pylibfdt/libfdt_wrap.c:5581:17: error: too few arguments to function ‘SWIG_Python_AppendOutput’
+|  5581 |     resultobj = SWIG_Python_AppendOutput(resultobj, val);
+|       |                 ^~~~~~~~~~~~~~~~~~~~~~~~
+
+Signed-off-by: Markus Volk <f_l_k@t-online.de>
+Reported-by: Rudi Heitbaum <rudi@heitbaum.com>
+Link: https://github.com/dgibson/dtc/pull/154
+---
+ scripts/dtc/pylibfdt/libfdt.i_shipped | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+--- a/scripts/dtc/pylibfdt/libfdt.i_shipped
++++ b/scripts/dtc/pylibfdt/libfdt.i_shipped
+@@ -1037,7 +1037,7 @@ typedef uint32_t fdt32_t;
+ 			fdt_string(fdt1, fdt32_to_cpu($1->nameoff)));
+ 		buff = PyByteArray_FromStringAndSize(
+ 			(const char *)($1 + 1), fdt32_to_cpu($1->len));
+-		resultobj = SWIG_Python_AppendOutput(resultobj, buff);
++		resultobj = SWIG_AppendOutput(resultobj, buff);
+ 	}
+ }
+ 
+@@ -1076,7 +1076,7 @@ typedef uint32_t fdt32_t;
+ 
+ %typemap(argout) int *depth {
+         PyObject *val = Py_BuildValue("i", *arg$argnum);
+-        resultobj = SWIG_Python_AppendOutput(resultobj, val);
++        resultobj = SWIG_AppendOutput(resultobj, val);
+ }
+ 
+ %apply int *depth { int *depth };
+@@ -1092,7 +1092,7 @@ typedef uint32_t fdt32_t;
+            if (PyTuple_GET_SIZE(resultobj) == 0)
+               resultobj = val;
+            else
+-              resultobj = SWIG_Python_AppendOutput(resultobj, val);
++              resultobj = SWIG_AppendOutput(resultobj, val);
+         }
+ }
+ 

package/boot/uboot-stm32/Makefile

@@ -0,0 +1,51 @@
+#
+# Copyright (C) 2024 Bootlin
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_VERSION:=2024.07
+PKG_RELEASE:=1
+
+PKG_HASH:=f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f
+PKG_MAINTAINER:=Thomas Richard <thomas.richard@bootlin.com>
+
+UBOOT_USE_INTREE_DTC:=1
+
+include $(INCLUDE_DIR)/u-boot.mk
+include $(INCLUDE_DIR)/package.mk
+
+define U-Boot/Default
+  BUILD_TARGET:=stm32
+  UBOOT_IMAGE:=u-boot.bin u-boot.dtb
+endef
+
+define U-Boot/stm32mp13
+  BUILD_SUBTARGET:=stm32mp1
+  UBOOT_CONFIG:=stm32mp13
+endef
+
+define U-Boot/stm32mp135f-dk
+  $(call U-Boot/stm32mp13)
+  NAME:=STM32MP135F-DK
+  DEVICE_TREE:=stm32mp135f-dk
+endef
+
+UBOOT_TARGETS := stm32mp135f-dk
+
+UBOOT_MAKE_FLAGS += DEVICE_TREE=$(DEVICE_TREE)
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
+	$(foreach img,$(UBOOT_IMAGE), \
+		$(CP) $(PKG_BUILD_DIR)/$(img) $(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-$(img); \
+	)
+endef
+
+define Package/u-boot/install/default
+endef
+
+$(eval $(call BuildPackage/U-Boot))

package/devel/gdb/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=gdb
 PKG_VERSION:=15.2
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
 PKG_SOURCE_URL:=@GNU/gdb
@@ -37,7 +37,7 @@ $(call Package/gdb/Default)
 endef
 
 define Package/gdb/description
-GDB, the GNU Project debugger, allows you to see what is going on `inside'
+GDB, the GNU Project debugger, allows you to see what is going on 'inside'
 another program while it executes -- or what another program was doing at the
 moment it crashed.
 endef

package/devel/perf/Makefile

@@ -10,7 +10,7 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=perf
 PKG_VERSION:=$(LINUX_VERSION)
-PKG_RELEASE:=5
+PKG_RELEASE:=6
 
 PKG_BUILD_FLAGS:=no-mips16 no-lto
 PKG_BUILD_PARALLEL:=1
@@ -50,6 +50,7 @@ MAKE_FLAGS = \
 	NO_LZMA=1 \
 	NO_BACKTRACE=1 \
 	NO_LIBNUMA=1 \
+	NO_SLANG=1 \
 	NO_GTK2=1 \
 	NO_LIBAUDIT=1 \
 	NO_LIBCRYPTO=1 \

package/devel/strace/Makefile

@@ -9,12 +9,12 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=strace
-PKG_VERSION:=6.11
+PKG_VERSION:=6.12
 PKG_RELEASE:=1
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
 PKG_SOURCE_URL:=https://strace.io/files/$(PKG_VERSION)
-PKG_HASH:=83262583a3529f02c3501aa8b8ac772b4cbc03dc934e98bab6e4883626e283a5
+PKG_HASH:=c47da93be45b6055f4dc741d7f20efaf50ca10160a5b100c109b294fd9c0bdfe
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 PKG_LICENSE:=LGPL-2.1-or-later

package/firmware/intel-microcode/Makefile

@@ -8,12 +8,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=intel-microcode
-PKG_VERSION:=20240531
+PKG_VERSION:=20250211
 PKG_RELEASE:=1
 
 PKG_SOURCE:=intel-microcode_3.$(PKG_VERSION).1.tar.xz
 PKG_SOURCE_URL:=@DEBIAN/pool/non-free-firmware/i/intel-microcode/
-PKG_HASH:=808cbb57a790dab7060b59b31e70e54ac47d3798d75e9784ed57a65b9f951fc4
+PKG_HASH:=06b7aca49790d673623cb42f7a62a517d82555ce96371d2967b568d6e30fd787
 PKG_BUILD_DIR:=$(BUILD_DIR)/intel-microcode-3.$(PKG_VERSION).1
 PKG_CPE_ID:=cpe:/a:intel:microcode
 

package/firmware/ipq-wifi/Makefile

@@ -6,9 +6,9 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/firmware/qca-wireless.git
-PKG_SOURCE_DATE:=2024-10-08
-PKG_SOURCE_VERSION:=dcbab62272bf5cab2ed857bc655d240970e14f2a
-PKG_MIRROR_HASH:=e53a3872abf5e35db6baaceb56e6ffa289f8dd9b6226cf8a4d5b87b541179175
+PKG_SOURCE_DATE:=2025-10-17
+PKG_SOURCE_VERSION:=a1529e183333e38bdc95dc8d9317b7af2bec0dcd
+PKG_MIRROR_HASH:=30ce8f808424602cba556e106cb16080ef29d6d45a9d9018e04664598460eb2f
 PKG_FLAGS:=nonshared
 
 include $(INCLUDE_DIR)/package.mk
@@ -37,6 +37,7 @@ ALLWIFIBOARDS:= \
 	dynalink_dl-wrx36 \
 	edgecore_eap102 \
 	edimax_cax1800 \
+	linksys_homewrk \
 	linksys_mx4200 \
 	linksys_mx5300 \
 	linksys_mx8500 \
@@ -54,7 +55,11 @@ ALLWIFIBOARDS:= \
 	skspruce_wia3300-20 \
 	spectrum_sax1v1k \
 	tplink_eap660hd-v1 \
+	tplink_archer-c59-v1 \
+	tplink_archer-c6-v2 \
+	tplink_archer-c60-v1 \
 	wallys_dr40x9 \
+	xiaomi_aiot-ac2350 \
 	xiaomi_ax3600 \
 	xiaomi_ax9000 \
 	yyets_le1 \
@@ -72,7 +77,7 @@ define Package/ipq-wifi-default
   SUBMENU:=ath10k Board-Specific Overrides
   SECTION:=firmware
   CATEGORY:=Firmware
-  DEPENDS:=@(TARGET_ipq40xx||TARGET_ipq806x||TARGET_qualcommax)
+  DEPENDS:=@(TARGET_ath79||TARGET_ipq40xx||TARGET_ipq806x||TARGET_qualcommax)
   TITLE:=Custom Board
 endef
 
@@ -95,6 +100,8 @@ define ipq-wifi-install-one
     $(call ipq-wifi-install-one-to,$(1),$(2),QCA9887/hw1.0),\
   $(if $(filter $(suffix $(1)),.QCA9984 .qca9984),\
     $(call ipq-wifi-install-one-to,$(1),$(2),QCA9984/hw1.0),\
+  $(if $(filter $(suffix $(1)),.QCA9988 .qca9988),\
+    $(call ipq-wifi-install-one-to,$(1),$(2),QCA9984/hw1.0),\
   $(if $(filter $(suffix $(1)),.QCA99X0 .qca99x0),\
     $(call ipq-wifi-install-one-to,$(1),$(2),QCA99X0/hw2.0),\
   $(if $(filter $(suffix $(1)),.IPQ6018 .ipq6018),\
@@ -104,7 +111,7 @@ define ipq-wifi-install-one
   $(if $(filter $(suffix $(1)),.QCN9074 .qcn9074),\
     $(call ipq-wifi-install-ath11-one-to,$(1),$(2),QCN9074/hw1.0),\
     $(error Unrecognized board-file suffix '$(suffix $(1))' for '$(1)')\
-  ))))))))
+  )))))))))
 
 endef
 # Blank line required at end of above define due to foreach context
@@ -164,6 +171,7 @@ $(eval $(call generate-ipq-wifi-package,compex_wpq873,Compex WPQ-873))
 $(eval $(call generate-ipq-wifi-package,dynalink_dl-wrx36,Dynalink DL-WRX36))
 $(eval $(call generate-ipq-wifi-package,edgecore_eap102,Edgecore EAP102))
 $(eval $(call generate-ipq-wifi-package,edimax_cax1800,Edimax CAX1800))
+$(eval $(call generate-ipq-wifi-package,linksys_homewrk,Linksys HomeWRK))
 $(eval $(call generate-ipq-wifi-package,linksys_mx4200,Linksys MX4200))
 $(eval $(call generate-ipq-wifi-package,linksys_mx5300,Linksys MX5300))
 $(eval $(call generate-ipq-wifi-package,linksys_mx8500,Linksys MX8500))
@@ -181,7 +189,11 @@ $(eval $(call generate-ipq-wifi-package,redmi_ax6,Redmi AX6))
 $(eval $(call generate-ipq-wifi-package,skspruce_wia3300-20,SKSpruce WIA3300-20))
 $(eval $(call generate-ipq-wifi-package,spectrum_sax1v1k,Spectrum SAX1V1K))
 $(eval $(call generate-ipq-wifi-package,tplink_eap660hd-v1,TP-Link EAP660 HD v1))
+$(eval $(call generate-ipq-wifi-package,tplink_archer-c59-v1,TP-Link Archer C59 V1))
+$(eval $(call generate-ipq-wifi-package,tplink_archer-c6-v2,TP-Link Archer C6 V2))
+$(eval $(call generate-ipq-wifi-package,tplink_archer-c60-v1,TP-Link Archer C60 V1))
 $(eval $(call generate-ipq-wifi-package,wallys_dr40x9,Wallys DR40X9))
+$(eval $(call generate-ipq-wifi-package,xiaomi_aiot-ac2350,Xiaomi AIoT AC2350))
 $(eval $(call generate-ipq-wifi-package,xiaomi_ax3600,Xiaomi AX3600))
 $(eval $(call generate-ipq-wifi-package,xiaomi_ax9000,Xiaomi AX9000))
 $(eval $(call generate-ipq-wifi-package,yyets_le1,YYeTs LE1))

package/firmware/lantiq/dsl-vrx200-firmware-xdsl/Makefile

@@ -40,7 +40,7 @@ define Package/dsl-vrx200-firmware-xdsl-a
   CATEGORY:=Firmware
   TITLE:=VRX200 / VR9 CPE xDSL Annex A firmware
   URL:=http://www.lantiq.com/
-  DEPENDS:=@TARGET_lantiq_xrx200
+  DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy)
 endef
 
 define Package/dsl-vrx200-firmware-xdsl-a/description
@@ -52,7 +52,7 @@ define Package/dsl-vrx200-firmware-xdsl-b
   CATEGORY:=Firmware
   TITLE:=VRX200 / VR9 CPE xDSL Annex B firmware
   URL:=http://www.lantiq.com/
-  DEPENDS:=@TARGET_lantiq_xrx200
+  DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy)
 endef
 
 define Package/dsl-vrx200-firmware-xdsl-b/description
@@ -64,7 +64,7 @@ define Package/dsl-vrx200-firmware-xdsl-a-patch
   CATEGORY:=Firmware
   TITLE:=VRX200 / VR9 CPE xDSL Annex B to Annex A firmware patch
   URL:=http://www.lantiq.com/
-  DEPENDS:=@TARGET_lantiq_xrx200 +dsl-vrx200-firmware-xdsl-b +bspatch
+  DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy) +dsl-vrx200-firmware-xdsl-b +bspatch
 endef
 
 define Package/dsl-vrx200-firmware-xdsl-a-patch/description
@@ -76,7 +76,7 @@ define Package/dsl-vrx200-firmware-xdsl-b-patch
   CATEGORY:=Firmware
   TITLE:=VRX200 / VR9 CPE xDSL Annex A to Annex B firmware patch
   URL:=http://www.lantiq.com/
-  DEPENDS:=@TARGET_lantiq_xrx200 +dsl-vrx200-firmware-xdsl-a +bspatch
+  DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy) +dsl-vrx200-firmware-xdsl-a +bspatch
 endef
 
 define Package/dsl-vrx200-firmware-xdsl-b-patch/description

package/firmware/linux-firmware/Makefile

@@ -8,12 +8,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=linux-firmware
-PKG_VERSION:=20241017
-PKG_RELEASE:=1
+PKG_VERSION:=20241110
+PKG_RELEASE:=2
 
 PKG_SOURCE_URL:=@KERNEL/linux/kernel/firmware
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
-PKG_HASH:=a26c38ef5a83272f2b98ce8bf8ca1865a852a3deea49ce5a8dd804b914351273
+PKG_HASH:=32e6d3eb5c7fcb69fe5d58976c6deafa0d6552719c6e74835064aff049d25bd7
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 

package/firmware/linux-firmware/broadcom.mk

@@ -128,12 +128,18 @@ define Package/brcmfmac-nvram-43455-sdio/install
 	$(LN) \
 		brcmfmac43455-sdio.raspberrypi,4-model-b.txt \
 		$(1)/lib/firmware/brcm/brcmfmac43455-sdio.raspberrypi,5-model-b.txt
+	$(LN) \
+		brcmfmac43455-sdio.raspberrypi,4-model-b.txt \
+		$(1)/lib/firmware/brcm/brcmfmac43455-sdio.raspberrypi,5-compute-module.txt
 	$(LN) \
 		brcmfmac43455-sdio.raspberrypi,4-model-b.txt \
 		$(1)/lib/firmware/brcm/brcmfmac43455-sdio.Raspberry\ Pi\ Foundation-Raspberry\ Pi\ Compute\ Module\ 4.txt
 	$(LN) \
 		brcmfmac43455-sdio.raspberrypi,4-model-b.txt \
 		$(1)/lib/firmware/brcm/brcmfmac43455-sdio.Raspberry\ Pi\ Foundation-Raspberry\ Pi\ 5\ Model\ B.txt
+	$(LN) \
+		brcmfmac43455-sdio.raspberrypi,4-model-b.txt \
+		$(1)/lib/firmware/brcm/brcmfmac43455-sdio.Raspberry\ Pi\ Foundation-Raspberry\ Pi\ Compute\ Module\ 5.txt
 	$(INSTALL_DATA) \
 		$(PKG_BUILD_DIR)/brcm/brcmfmac43455-sdio.MINIX-NEO\ Z83-4.txt \
 		$(1)/lib/firmware/brcm/

package/firmware/linux-firmware/intel.mk

@@ -199,6 +199,14 @@ define Package/iwlwifi-firmware-ax210/install
 endef
 $(eval $(call BuildPackage,iwlwifi-firmware-ax210))
 
+Package/iwlwifi-firmware-ax411 = $(call Package/firmware-default,Intel AX411 firmware)
+define Package/iwlwifi-firmware-ax411/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-so-a0-gf4-a0-89.ucode $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-so-a0-gf4-a0.pnvm $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwlwifi-firmware-ax411))
+
 Package/iwlwifi-firmware-be200 = $(call Package/firmware-default,Intel BE200 firmware)
 define Package/iwlwifi-firmware-be200/install
 	$(INSTALL_DIR) $(1)/lib/firmware
@@ -216,29 +224,49 @@ define Package/e100-firmware/install
 endef
 $(eval $(call BuildPackage,e100-firmware))
 
-Package/intel-igpu-firmware-dmc = $(call Package/firmware-default,Intel iGPU DMC Display MC firmware)
-define Package/intel-igpu-firmware-dmc/install
-	$(INSTALL_DIR) $(1)/lib/firmware/i915
-	$(CP) \
-		$(PKG_BUILD_DIR)/i915/*_dmc_*.bin* \
-		$(1)/lib/firmware/i915/
+i915_deps:=+i915-firmware-dmc +i915-firmware-guc +i915-firmware-huc +i915-firmware-gsc
+Package/i915-firmware = $(call Package/firmware-default,Intel I915 firmware \(meta package\),$(i915_deps),LICENSE.i915)
+define Package/i915-firmware/install
+	true
 endef
-$(eval $(call BuildPackage,intel-igpu-firmware-dmc))
+$(eval $(call BuildPackage,i915-firmware))
 
-Package/intel-igpu-firmware-guc = $(call Package/firmware-default,Intel iGPU GUC Graphics MC firmware)
-define Package/intel-igpu-firmware-guc/install
+Package/i915-firmware-dmc = $(call Package/firmware-default,Intel I915 DMC firmware,,LICENSE.i915)
+define Package/i915-firmware-dmc/install
 	$(INSTALL_DIR) $(1)/lib/firmware/i915
-	$(CP) \
-		$(PKG_BUILD_DIR)/i915/*_guc_*.bin* \
-		$(1)/lib/firmware/i915/
+	for f in $(PKG_BUILD_DIR)/i915/*_dmc*.bin; do                        \
+	  t=`echo $$$${f##*/} | cut -d_ -f2 | cut -d. -f1`;                  \
+	  if [ "$$$$t" = dmc ]; then $(CP) $$$$f $(1)/lib/firmware/i915/; fi \
+	done
 endef
-$(eval $(call BuildPackage,intel-igpu-firmware-guc))
+$(eval $(call BuildPackage,i915-firmware-dmc))
 
-Package/intel-igpu-firmware-huc = $(call Package/firmware-default,Intel iGPU HUC H.265 MC firmware)
-define Package/intel-igpu-firmware-huc/install
+Package/i915-firmware-guc = $(call Package/firmware-default,Intel I915 GUC firmware,,LICENSE.i915)
+define Package/i915-firmware-guc/install
 	$(INSTALL_DIR) $(1)/lib/firmware/i915
-	$(CP) \
-		$(PKG_BUILD_DIR)/i915/*_huc_*.bin* \
-		$(1)/lib/firmware/i915/
+	for f in $(PKG_BUILD_DIR)/i915/*_guc*.bin; do                        \
+	  t=`echo $$$${f##*/} | cut -d_ -f2 | cut -d. -f1`;                  \
+	  if [ "$$$$t" = guc ]; then $(CP) $$$$f $(1)/lib/firmware/i915/; fi \
+	done
 endef
-$(eval $(call BuildPackage,intel-igpu-firmware-huc))
+$(eval $(call BuildPackage,i915-firmware-guc))
+
+Package/i915-firmware-huc = $(call Package/firmware-default,Intel I915 HUC firmware,,LICENSE.i915)
+define Package/i915-firmware-huc/install
+	$(INSTALL_DIR) $(1)/lib/firmware/i915
+	for f in $(PKG_BUILD_DIR)/i915/*_huc*.bin; do                        \
+	  t=`echo $$$${f##*/} | cut -d_ -f2 | cut -d. -f1`;                  \
+	  if [ "$$$$t" = huc ]; then $(CP) $$$$f $(1)/lib/firmware/i915/; fi \
+	done
+endef
+$(eval $(call BuildPackage,i915-firmware-huc))
+
+Package/i915-firmware-gsc = $(call Package/firmware-default,Intel I915 GSC firmware,,LICENSE.i915)
+define Package/i915-firmware-gsc/install
+	$(INSTALL_DIR) $(1)/lib/firmware/i915
+	for f in $(PKG_BUILD_DIR)/i915/*_gsc*.bin; do                        \
+	  t=`echo $$$${f##*/} | cut -d_ -f2 | cut -d. -f1`;                  \
+	  if [ "$$$$t" = gsc ]; then $(CP) $$$$f $(1)/lib/firmware/i915/; fi \
+	done
+endef
+$(eval $(call BuildPackage,i915-firmware-gsc))

package/firmware/linux-firmware/qca_ath11k.mk

@@ -10,7 +10,11 @@ Package/ath11k-firmware-wcn6750 = $(call Package/firmware-default,WCN6750 ath11k
 define Package/ath11k-firmware-wcn6750/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/WCN6750/hw1.0
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/ath11k/WCN6750/hw1.0/* $(1)/lib/firmware/ath11k/WCN6750/hw1.0/
+		$(PKG_BUILD_DIR)/ath11k/WCN6750/hw1.0/board-2.bin $(1)/lib/firmware/ath11k/WCN6750/hw1.0/
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/ath11k/WCN6750/hw1.0/Notice.txt $(1)/lib/firmware/ath11k/WCN6750/hw1.0/
+	$(INSTALL_DATA) \
+	        $(PKG_BUILD_DIR)/ath11k/WCN6750/hw1.0/sc7280/wpss.mbn $(1)/lib/firmware/ath11k/WCN6750/hw1.0/
 endef
 $(eval $(call BuildPackage,ath11k-firmware-wcn6750))
 

package/firmware/linux-firmware/realtek.mk

@@ -140,6 +140,20 @@ define Package/rtl8761bu-firmware/install
 endef
 $(eval $(call BuildPackage,rtl8761bu-firmware))
 
+Package/rtl8812a-firmware = $(call Package/firmware-default,RealTek RTL8812AU firmware)
+define Package/rtl8812a-firmware/install
+	$(INSTALL_DIR) $(1)/lib/firmware/rtw88
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtw88/rtw8812a_fw.bin $(1)/lib/firmware/rtw88
+endef
+$(eval $(call BuildPackage,rtl8812a-firmware))
+
+Package/rtl8821a-firmware = $(call Package/firmware-default,RealTek RTL8821AU firmware)
+define Package/rtl8821a-firmware/install
+	$(INSTALL_DIR) $(1)/lib/firmware/rtw88
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtw88/rtw8821a_fw.bin $(1)/lib/firmware/rtw88
+endef
+$(eval $(call BuildPackage,rtl8821a-firmware))
+
 Package/rtl8821ae-firmware = $(call Package/firmware-default,RealTek RTL8821AE firmware,,LICENCE.rtlwifi_firmware.txt)
 define Package/rtl8821ae-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi

package/firmware/murata-firmware/Makefile

@@ -0,0 +1,57 @@
+#
+# Copyright (C) 2024 Bootlin
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=murata-firmware
+PKG_RELEASE:=1
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_DATE:=2024-09-12
+PKG_SOURCE_URL:=https://github.com/murata-wireless/cyw-fmac-fw.git
+PKG_MIRROR_HASH:=26f8a2df800666daab183b2842e5b3d591b1e5b31769d5429f9d70527f43d152
+PKG_SOURCE_VERSION:=50ac17bb65b2342cd954d49d9bc492709d431c3c
+
+PKG_MAINTAINER:=Thomas Richard <thomas.richard@bootlin.com>
+PKG_LICENSE_FILES:=LICENCE
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/murata-firmware-default
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  URL:=https://community.murata.com/
+endef
+
+define Build/Compile
+endef
+
+define Package/murata-firmware-43430-sdio
+  $(Package/murata-firmware-default)
+  TITLE:=BCM43430 FullMac SDIO firmware
+  CONFLICTS:=cypress-firmware-43430-sdio
+endef
+
+define Package/murata-firmware-43430-sdio/install
+	$(INSTALL_DIR) $(1)/lib/firmware/murata
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/cyfmac43430-sdio.bin \
+		$(1)/lib/firmware/murata/
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/cyfmac43430-sdio.1DX.clm_blob \
+		$(1)/lib/firmware/murata/
+	$(INSTALL_DIR) $(1)/lib/firmware/brcm
+	$(LN) \
+		../murata/cyfmac43430-sdio.bin \
+		$(1)/lib/firmware/brcm/brcmfmac43430-sdio.bin
+	$(LN) \
+		../murata/cyfmac43430-sdio.1DX.clm_blob \
+		$(1)/lib/firmware/brcm/brcmfmac43430-sdio.clm_blob
+endef
+
+$(eval $(call BuildPackage,murata-firmware-43430-sdio))
+

package/firmware/murata-nvram/Makefile

@@ -0,0 +1,48 @@
+#
+# Copyright (C) 2024 Bootlin
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=murata-nvram
+PKG_RELEASE:=1
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_DATE:=2024-09-28
+PKG_SOURCE_URL:=https://github.com/murata-wireless/cyw-fmac-nvram.git
+PKG_MIRROR_HASH:=e2fc6f1f9898edfd67f5495e615882700f03b42a75efa2e3f4e2d524aed0efb8
+PKG_SOURCE_VERSION:=255819aab07572d87576a13329ef9d4c654167aa
+
+PKG_MAINTAINER:=Thomas Richard <thomas.richard@bootlin.com>
+PKG_LICENSE_FILES:=LICENCE.cypress
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/murata-nvram-default
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  URL:=https://community.murata.com/
+endef
+
+define Build/Compile
+endef
+
+define Package/murata-nvram-43430-sdio
+  $(Package/murata-nvram-default)
+  TITLE:=BCM43430 SDIO NVRAM
+  CONFLICTS:=brcmfmac-nvram-43430-sdio
+endef
+
+define Package/murata-nvram-43430-sdio/install
+	$(INSTALL_DIR) $(1)/lib/firmware/brcm
+	$(INSTALL_DATA)	./files/cyfmac43430-sdio.1DX.stm32.txt \
+		$(1)/lib/firmware/brcm/
+	$(LN) \
+		cyfmac43430-sdio.1DX.stm32.txt \
+		$(1)/lib/firmware/brcm/brcmfmac43430-sdio.st,stm32mp135f-dk.txt
+endef
+
+$(eval $(call BuildPackage,murata-nvram-43430-sdio))

package/firmware/murata-nvram/files/cyfmac43430-sdio.1DX.stm32.txt

@@ -0,0 +1,47 @@
+# This NVRAM file is based on cyfmac43430-sdio.1DX.txt, except that the muxenab
+# parameter was unset to enable IB IRQ (OOB IRQ is not stable on STM32
+# platforms).
+# 2.4 GHz, 20 MHz BW mode
+manfid=0x2d0
+prodid=0x0726
+vendid=0x14e4
+devid=0x43e2
+boardtype=0x0726
+boardrev=0x1202
+boardnum=22
+macaddr=00:90:4c:c5:12:38
+sromrev=11
+boardflags=0x00404201
+boardflags3=0x08000000
+xtalfreq=37400
+nocrc=1
+ag0=0
+aa2g=1
+ccode=ALL
+#pa0itssit=0x20
+extpagain2g=0
+pa2ga0=-145,6667,-751
+AvVmid_c0=0x0,0xc8
+cckpwroffset0=2
+maxp2ga0=74
+#txpwrbckof=6
+cckbw202gpo=0
+legofdmbw202gpo=0x88888888
+mcsbw202gpo=0xaaaaaaaa
+propbw202gpo=0xdd
+ofdmdigfilttype=18
+ofdmdigfilttypebe=18
+papdmode=1
+papdvalidtest=1
+pacalidx2g=48
+papdepsoffset=-22
+papdendidx=58
+il0macaddr=00:90:4c:c5:12:38
+wl0id=0x431b
+# muxenab defined to enable OOB IRQ. Level sensitive interrupt via WL_HOST_WAKE line. 
+# muxenab=0x10
+#BT COEX deferral limit setting
+#btc_params 8 45000
+#btc_params 10 20000
+#spurconfig=0x3
+# End of NVRAM - do not remove this line #

package/firmware/omnia-mcu-firmware/Makefile

@@ -29,7 +29,6 @@ define Package/omnia-mcu-firmware
   CATEGORY:=Firmware
   URL:=https://gitlab.nic.cz/turris/hw/$(PKG_DISTNAME)/-/releases
   TITLE:=CZ.NIC Turris Omnia MCU firmware
-  DEPENDS:=@TARGET_mvebu_cortexa9_DEVICE_cznic_turris-omnia
 endef
 
 define Package/omnia-mcu-firmware/description

package/firmware/wireless-regdb/Makefile

@@ -1,14 +1,14 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wireless-regdb
-PKG_VERSION:=2024.10.07
+PKG_VERSION:=2025.07.10
 PKG_RELEASE:=1
 PKG_LICENSE:=ISC
 PKG_LICENSE_FILES:=LICENSE
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
 PKG_SOURCE_URL:=@KERNEL/software/network/wireless-regdb/
-PKG_HASH:=f76f2bd79a653e9f9dd50548d99d03a4a4eb157da056dfd5892f403ec28fb3d5
+PKG_HASH:=a8340bcdcd1b5db6c79149879d122b170f3bb075381718d4f429ad831a6fa28d
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 

package/kernel/ath10k-ct/patches/130-ath10k-read-qcom-coexist-support-as-a-u32.patch

@@ -1,60 +0,0 @@
-From 630df9786fdaeb78c21f1e28c9b70ac83a1b482c Mon Sep 17 00:00:00 2001
-From: Vincent Tremblay <vincent@vtremblay.dev>
-Date: Sat, 31 Dec 2022 09:24:00 -0500
-Subject: [PATCH] ath10k: read qcom,coexist-support as a u32
-
-Read qcom,coexist-support as a u32 instead of a u8
-
-When we set the property to <1> in the DT (as specified in the doc),
-"of_property_read_u8" read 0 instead of 1. This is because of the data format. 
-
-By default <1> is written with 32 bits. 
-The problem is that the driver is trying to read a u8.
-
-The difference can be visualized using hexdump in a running device:
-Default 32 bits output:
-=======================
-0000000 0000 0100
-0000004
-
-8 bits output:
-==============
-0000000 0001
-0000001
-
-By changing "of_property_read_u8" by "of_property_read_u32", the driver
-is aligned with the documentation and is able to read the value without
-modifying the DT.
-
-The other solution would be to force the value in the DT to be saved as
-an 8 bits value (qcom,coexist-support = /bits/ 8 <1>), 
-which is against the doc and less intuitive.
-
-Validation:
-===========
-The patch was tested on a real device and we can see in the debug logs
-that the feature is properly initialized:
-
-[  109.102097] ath10k_ahb a000000.wifi: boot coex_support 1 coex_gpio_pin 52
-
-Signed-off-by: Vincent Tremblay <vincent@vtremblay.dev>
-
---- a/ath10k-6.10/core.c
-+++ b/ath10k-6.10/core.c
-@@ -2871,14 +2871,14 @@ done:
- static void ath10k_core_fetch_btcoex_dt(struct ath10k *ar)
- {
- 	struct device_node *node;
--	u8 coex_support = 0;
-+	u32 coex_support = 0;
- 	int ret;
- 
- 	node = ar->dev->of_node;
- 	if (!node)
- 		goto out;
- 
--	ret = of_property_read_u8(node, "qcom,coexist-support", &coex_support);
-+	ret = of_property_read_u32(node, "qcom,coexist-support", &coex_support);
- 	if (ret) {
- 		ar->coex_support = true;
- 		goto out;

package/kernel/ath10k-ct/patches/205-ath10k-ct-silence-warning-caused-by-unsupported-retr.patch

@@ -0,0 +1,34 @@
+From: Shiji Yang <yangshiji66@outlook.com>
+Date: Fri, 28 Mar 2025 20:26:04 +0800
+Subject: [PATCH] ath10k-ct: silence warning caused by unsupported retry_limit
+ value
+
+Some retry_limit values are not supported by ath10k wave2 chips.
+We can just skip config it for these chips. And it's safe to
+return 0 in this case because the hardware is still working.
+
+Suggested-by: Ben Greear <greearb@candelatech.com>
+Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
+---
+ ath10k-6.14/mac.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/ath10k-6.10/mac.c
++++ b/ath10k-6.10/mac.c
+@@ -5395,7 +5395,7 @@ static int ath10k_config_retry_limit(str
+ 		 */
+ 		ath10k_warn(ar, "Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: %d\n",
+ 			    limit);
+-		return -EINVAL;
++		goto skip_retry_limit;
+ 	}
+ 
+ 	list_for_each_entry(arvif, &ar->arvifs, list) {
+@@ -5406,6 +5406,7 @@ static int ath10k_config_retry_limit(str
+ 		}
+ 	}
+ 
++skip_retry_limit:
+ 	return ret;
+ }
+ 

package/kernel/ath10k-ct/patches/206-ath10k-ct-silence-noisy-log-caused-by-flushing-queue.patch

@@ -0,0 +1,31 @@
+From: Shiji Yang <yangshiji66@outlook.com>
+Date: Fri, 28 Mar 2025 21:02:27 +0800
+Subject: [PATCH] ath10k-ct: silence noisy log caused by flushing queue
+
+.flush() is a regular mac80211 operation aims to clear all pending
+frames from the hardware queue. Only developers need to care about it.
+
+Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
+---
+ ath10k-6.14/mac.c | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+--- a/ath10k-6.10/mac.c
++++ b/ath10k-6.10/mac.c
+@@ -9061,12 +9061,12 @@ static void ath10k_flush(struct ieee8021
+         if (vif) {
+                 arvif = (void *)vif->drv_priv;
+                 vid = arvif->vdev_id;
+-                ath10k_info(ar, "mac flush vdev %d drop %d queues 0x%x ar->paused: 0x%lx  arvif->paused: 0x%lx\n",
+-                            arvif->vdev_id, drop, queues, ar->tx_paused, arvif->tx_paused);
++                ath10k_dbg(ar, ATH10K_DBG_MAC, "mac flush vdev %d drop %d queues 0x%x ar->paused: 0x%lx  arvif->paused: 0x%lx\n",
++                           arvif->vdev_id, drop, queues, ar->tx_paused, arvif->tx_paused);
+         }
+         else {
+-                ath10k_info(ar, "mac flush null vif, drop %d queues 0x%x\n",
+-                            drop, queues);
++                ath10k_dbg(ar, ATH10K_DBG_MAC, "mac flush null vif, drop %d queues 0x%x\n",
++                           drop, queues);
+         }
+ 
+ 

package/kernel/ath10k-ct/patches/988-ath10k-always-use-mac80211-loss-detection.patch

@@ -18,7 +18,7 @@ Signed-off-by: David Bauer <mail@david-bauer.net>
 
 --- a/ath10k-6.10/mac.c
 +++ b/ath10k-6.10/mac.c
-@@ -11316,7 +11316,6 @@ int ath10k_mac_register(struct ath10k *a
+@@ -11317,7 +11317,6 @@ int ath10k_mac_register(struct ath10k *a
  	ieee80211_hw_set(ar->hw, CHANCTX_STA_CSA);
  	ieee80211_hw_set(ar->hw, QUEUE_CONTROL);
  	ieee80211_hw_set(ar->hw, SUPPORTS_TX_FRAG);

package/kernel/bcm27xx-gpu-fw/Makefile

@@ -2,13 +2,13 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=bcm27xx-gpu-fw
-PKG_VERSION:=2024.10.08
+PKG_VERSION:=2025.04.30
 PKG_VERSION_REAL:=1.$(subst .,,$(PKG_VERSION))
 PKG_RELEASE:=1
 
 PKG_SOURCE:=raspi-firmware_$(PKG_VERSION_REAL).orig.tar.xz
 PKG_SOURCE_URL:=https://github.com/raspberrypi/firmware/releases/download/$(PKG_VERSION_REAL)
-PKG_HASH:=11e7bedcd0f52729bbc82ae8de3cb3f52eb4ae3d6bdb3e11fbfdbea9c4a2b1c3
+PKG_HASH:=25bcff5992c6d7057de4a5c6834b7f90b7136fe12aa63fa32793329bf74a95bf
 
 PKG_FLAGS:=nonshared
 
@@ -33,6 +33,10 @@ define Build/Compile
 	true
 endef
 
+define Package/bcm27xx-gpu-fw/install
+	true
+endef
+
 define Build/InstallDev
 	$(CP) $(PKG_BUILD_DIR)/boot/bootcode.bin $(KERNEL_BUILD_DIR)
 	$(CP) $(PKG_BUILD_DIR)/boot/LICENCE.broadcom $(KERNEL_BUILD_DIR)

package/kernel/bcm63xx-cfe/Makefile

@@ -6,9 +6,9 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_URL:=https://github.com/openwrt/bcm63xx-cfe.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2024-06-25
-PKG_SOURCE_VERSION:=6519bd2dde3535cafeea43157755f4dbef2f90c5
-PKG_MIRROR_HASH:=db4da580b7a611a2b4ddd4ff812e5f8ddfd9694b6f5fd8246a341e61967c00ef
+PKG_SOURCE_DATE:=2025-04-02
+PKG_SOURCE_VERSION:=b8128fa4bdcdaf97549138965b00d5d7ceb7bb0f
+PKG_MIRROR_HASH:=d33fad4fb5f4419bb287f3c3df6cceabab01fc7852c24cf29a15befa38cc0d45
 
 PKG_FLAGS:=nonshared
 

package/kernel/cryptodev-linux/Makefile

@@ -28,7 +28,7 @@ include $(INCLUDE_DIR)/package.mk
 define KernelPackage/cryptodev
   SUBMENU:=Cryptographic API modules
   TITLE:=Driver for cryptographic acceleration
-  URL:=http://cryptodev-linux.org/
+  URL:=https://github.com/cryptodev-linux/cryptodev-linux
   DEPENDS:=+kmod-crypto-authenc +kmod-crypto-hash
   FILES:=$(PKG_BUILD_DIR)/cryptodev.$(LINUX_KMOD_SUFFIX)
   AUTOLOAD:=$(call AutoLoad,50,cryptodev)
@@ -36,8 +36,9 @@ define KernelPackage/cryptodev
 endef
 
 define KernelPackage/cryptodev/description
-  This is a driver for that allows to use the Linux kernel supported
-  hardware ciphers by user-space applications.
+  This driver allows use of the Linux kernel supported hardware-based
+  cryptographic and hash accelerators by user-space applications,
+  via a "/dev/crypto" device.
 endef
 
 define Build/Configure

package/kernel/gpio-button-hotplug/src/gpio-button-hotplug.c

@@ -302,7 +302,7 @@ struct gpio_keys_button_dev {
 
 	struct device *dev;
 	struct gpio_keys_platform_data *pdata;
-	struct gpio_keys_button_data data[0];
+	struct gpio_keys_button_data data[];
 };
 
 static void gpio_keys_polled_queue_work(struct gpio_keys_button_dev *bdev)
@@ -693,7 +693,6 @@ static struct platform_driver gpio_keys_driver = {
 	.remove	= gpio_keys_remove,
 	.driver	= {
 		.name	= "gpio-keys",
-		.owner	= THIS_MODULE,
 		.of_match_table = of_match_ptr(gpio_keys_of_match),
 	},
 };
@@ -703,7 +702,6 @@ static struct platform_driver gpio_keys_polled_driver = {
 	.remove	= gpio_keys_remove,
 	.driver	= {
 		.name	= "gpio-keys-polled",
-		.owner	= THIS_MODULE,
 		.of_match_table = of_match_ptr(gpio_keys_polled_of_match),
 	},
 };

package/kernel/gpio-nct5104d/src/gpio-nct5104d.c

@@ -366,7 +366,6 @@ err:
 
 static struct platform_driver nct5104d_gpio_driver = {
 	.driver = {
-		.owner	= THIS_MODULE,
 		.name	= DRVNAME,
 	},
 	.probe		= nct5104d_gpio_probe,

package/kernel/lantiq/ltq-adsl-mei/src/drv_mei_cpe.c

@@ -185,7 +185,7 @@ static void *g_xdata_addr = NULL;
 static u32 *mei_arc_swap_buff = NULL;	//  holding swap pages
 
 extern void ltq_mask_and_ack_irq(struct irq_data *d);
-static void inline MEI_MASK_AND_ACK_IRQ(int x)
+static inline void MEI_MASK_AND_ACK_IRQ(int x)
 {
 	struct irq_data d;
 	d.hwirq = x;
@@ -1178,7 +1178,7 @@ DSL_BSP_AdslLedSet (DSL_DEV_Device_t * dev, DSL_DEV_LedId_t led_number, DSL_DEV_
 * \param       CMVMSG          The pointer to message buffer.
 * \ingroup     Internal
 */
-void
+static void
 makeCMV (u8 opcode, u8 group, u16 address, u16 index, int size, u16 * data, u16 *CMVMSG)
 {
         memset (CMVMSG, 0, MSG_LENGTH * 2);
@@ -1787,6 +1787,7 @@ extern void ifx_usb_enable_afe_oc(void);
  */
 static irqreturn_t IFX_MEI_IrqHandle (int int1, void *void0)
 {
+	u32 stat;
 	u32 scratch;
 	DSL_DEV_Device_t *pDev = (DSL_DEV_Device_t *) void0;
 #if defined(CONFIG_LTQ_MEI_FW_LOOPBACK) && defined(DFE_PING_TEST)
@@ -1820,6 +1821,12 @@ static irqreturn_t IFX_MEI_IrqHandle (int int1, void *void0)
                 if (dsl_bsp_event_callback[event].function)
                         (*dsl_bsp_event_callback[event].function)(pDev, event, dsl_bsp_event_callback[event].pData);
         } else { // normal message
+                IFX_MEI_LongWordReadOffset (pDev, (u32) ME_ARC2ME_STAT, &stat);
+                if (!(stat & ARC_TO_MEI_MSGAV)) {
+                        // status register indicates there is no message
+                        return IRQ_NONE;
+                }
+
                 IFX_MEI_MailboxRead (pDev, DSL_DEV_PRIVATE(pDev)->CMV_RxMsg, MSG_LENGTH);
                 if (DSL_DEV_PRIVATE(pDev)-> cmv_waiting == 1) {
                         DSL_DEV_PRIVATE(pDev)-> arcmsgav = 1;
@@ -2444,7 +2451,7 @@ IFX_MEI_IoctlCopyTo (int from_kernel, char *dest, char *from, int size)
 	return ret;
 }
 
-int
+static int
 IFX_MEI_Ioctls (DSL_DEV_Device_t * pDev, int from_kernel, unsigned int command, unsigned long lon)
 {
 	int i = 0;
@@ -2807,7 +2814,6 @@ static struct platform_driver ltq_mei_driver = {
 	.remove = ltq_mei_remove,
 	.driver = {
 		.name = "lantiq,mei-xway",
-		.owner = THIS_MODULE,
 		.of_match_table = ltq_mei_match,
 	},
 };

package/kernel/lantiq/ltq-adsl-mei/src/ifxmips_mei_interface.h

@@ -618,6 +618,9 @@ extern DSL_DEV_MeiError_t DSL_BSP_Showtime(DSL_DEV_Device_t *, DSL_uint32_t, DSL
 extern int DSL_BSP_ATMLedCBRegister( int (*ifx_adsl_ledcallback)(void));
 extern DSL_DEV_MeiError_t DSL_BSP_MemoryDebugAccess(DSL_DEV_Device_t *, DSL_BSP_MemoryAccessType_t, DSL_uint32_t, DSL_uint32_t *, DSL_uint32_t);
 extern volatile DSL_DEV_Device_t *adsl_dev;
+extern int DSL_BSP_ATMLedCBUnregister (int (*ifx_adsl_ledcallback) (void));
+extern int ifx_mei_atm_led_blink(void);
+extern int ifx_mei_atm_showtime_check(int *is_showtime, struct port_cell_info *port_cell, void **xdata_addr);
 
 /**
  *    Dummy structure by now to show mechanism of extended data that will be

package/kernel/lantiq/ltq-adsl/patches/120-platform.patch

@@ -36,7 +36,7 @@
  }
  
  #ifndef _lint
-@@ -1159,8 +1159,30 @@ module_param(debug_level, byte, 0);
+@@ -1159,8 +1159,29 @@ module_param(debug_level, byte, 0);
  MODULE_PARM_DESC(debug_level, "set to get more (1) or fewer (4) debug outputs");
  #endif /* #ifndef DSL_DEBUG_DISABLE*/
  
@@ -59,7 +59,6 @@
 +	.remove = __devexit_p(ltq_adsl_remove),
 +	.driver = {
 +		.name = "adsl",
-+		.owner = THIS_MODULE,
 +		.of_match_table = ltq_adsl_match,
 +	},
 +};

package/kernel/lantiq/ltq-adsl/patches/411-add-missing-header-platform_device.h.patch

@@ -0,0 +1,25 @@
+From: Shiji Yang <yangshiji66@outlook.com>
+Date: Fri, 9 May 2025 20:01:14 +0800
+Subject: [PATCH] add missing header platform_device.h
+
+Fix compilation error:
+
+/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_xway/ltq-dsl-danube/drv_dsl_cpe_api-3.24.4.4/src/common/drv_dsl_cpe_os_linux.c:1155:15: error: variable 'ltq_adsl_driver' has initializer but incomplete type
+ 1155 | static struct platform_driver ltq_adsl_driver = {
+      |               ^~~~~~~~~~~~~~~
+
+Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
+---
+ src/common/drv_dsl_cpe_os_linux.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/src/common/drv_dsl_cpe_os_linux.c
++++ b/src/common/drv_dsl_cpe_os_linux.c
+@@ -13,6 +13,7 @@
+ #define DSL_INTERN
+ #include <linux/kthread.h>
+ #include <linux/of_platform.h>
++#include <linux/platform_device.h>
+ 
+ #include "drv_dsl_cpe_api.h"
+ #include "drv_dsl_cpe_api_ioctl.h"

package/kernel/lantiq/ltq-adsl/patches/412-silence-missing-prototypes-warnings.patch

@@ -0,0 +1,32 @@
+From: Shiji Yang <yangshiji66@outlook.com>
+Date: Fri, 9 May 2025 20:58:09 +0800
+Subject: [PATCH] silence missing-prototypes warnings
+
+This patch silences various missing-prototypes build warnings on
+6.12 kernel.
+
+Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
+---
+ src/Makefile.am | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+--- a/src/Makefile.am
++++ b/src/Makefile.am
+@@ -299,6 +299,8 @@ if KERNEL_2_6
+ 
+ drv_dsl_cpe_api_OBJS = "$(subst .c,.o,$(filter %.c,$(drv_dsl_cpe_api_SOURCES)))"
+ 
++PKGFIX_CFLAGS = -Wno-error=missing-prototypes
++
+ drv_dsl_cpe_api.ko: $(drv_dsl_cpe_api_SOURCES)
+ 	@echo "drv_dsl_cpe_api: Making Linux 2.6.x kernel object"
+ 	if test ! -e common/drv_dsl_cpe_api.c ; then \
+@@ -311,7 +313,7 @@ drv_dsl_cpe_api.ko: $(drv_dsl_cpe_api_SO
+ 	@echo "# drv_dsl_cpe_api: Generated to build Linux 2.6.x kernel object" > $(PWD)/Kbuild
+ 	@echo "obj-m := $(subst .ko,.o,$@)"			>> $(PWD)/Kbuild
+ 	@echo "$(subst .ko,,$@)-y := $(drv_dsl_cpe_api_OBJS)"	>> $(PWD)/Kbuild
+-	@echo "EXTRA_CFLAGS := -DHAVE_CONFIG_H $(drv_dsl_cpe_api_CFLAGS) $(DSL_DRIVER_INCL_PATH) $(IFXOS_INCLUDE_PATH) -I@abs_srcdir@/include -I$(PWD)/include"	>> $(PWD)/Kbuild
++	@echo "EXTRA_CFLAGS := -DHAVE_CONFIG_H $(drv_dsl_cpe_api_CFLAGS) $(PKGFIX_CFLAGS) $(DSL_DRIVER_INCL_PATH) $(IFXOS_INCLUDE_PATH) -I@abs_srcdir@/include -I$(PWD)/include"	>> $(PWD)/Kbuild
+ 	$(MAKE) ARCH=@KERNEL_ARCH@ -C @KERNEL_BUILD_PATH@ O=@KERNEL_BUILD_PATH@ M=$(PWD) modules
+ 
+ clean-generic:

package/kernel/lantiq/ltq-atm/Makefile

@@ -33,7 +33,7 @@ endef
 KernelPackage/ltq-atm-danube=$(call KernelPackage/ltq-atm-template,danube,(TARGET_lantiq_xway||TARGET_lantiq_xway_legacy))
 KernelPackage/ltq-atm-ar9=$(call KernelPackage/ltq-atm-template,ar9,TARGET_lantiq_xway)
 KernelPackage/ltq-atm-ase=$(call KernelPackage/ltq-atm-template,ase,TARGET_lantiq_ase)
-KernelPackage/ltq-atm-vr9=$(call KernelPackage/ltq-atm-template,vr9,TARGET_lantiq_xrx200)
+KernelPackage/ltq-atm-vr9=$(call KernelPackage/ltq-atm-template,vr9,(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy))
 
 define Build/Configure
 endef

package/kernel/lantiq/ltq-atm/patches/100-ltq_atm-fix-compillation-warning.patch

@@ -1,12 +0,0 @@
---- a/ltq_atm.c
-+++ b/ltq_atm.c
-@@ -338,7 +338,8 @@ static int ppe_ioctl(struct atm_dev *dev
- 		break;
- 
- 	case PPE_ATM_MIB_VCC:   /*  VCC related MIB */
--		copy_from_user(&mib_vcc, arg, sizeof(mib_vcc));
-+		if (copy_from_user(&mib_vcc, arg, sizeof(mib_vcc)))
-+			return -EFAULT;
- 		conn = find_vpivci(mib_vcc.vpi, mib_vcc.vci);
- 		if (conn >= 0) {
- 			mib_vcc.mib_vcc.aal5VccCrcErrors     = g_atm_priv_data.conn[conn].aal5_vcc_crc_err;

package/kernel/lantiq/ltq-atm/src/ifxmips_atm_amazon_se.c

@@ -254,7 +254,7 @@ static inline int pp32_download_code(u32 *code_src, unsigned int code_dword_len,
  * ####################################
  */
 
-extern void ase_fw_ver(unsigned int *major, unsigned int *minor)
+static void ase_fw_ver(unsigned int *major, unsigned int *minor)
 {
     ASSERT(major != NULL, "pointer is NULL");
     ASSERT(minor != NULL, "pointer is NULL");
@@ -263,7 +263,7 @@ extern void ase_fw_ver(unsigned int *major, unsigned int *minor)
     *minor = FW_VER_ID->minor;
 }
 
-int ase_init(struct platform_device *pdev)
+static int ase_init(struct platform_device *pdev)
 {
     init_pmu();
 
@@ -280,7 +280,7 @@ int ase_init(struct platform_device *pdev)
     return 0;
 }
 
-void ase_shutdown(void)
+static void ase_shutdown(void)
 {
     uninit_pmu();
 }
@@ -294,7 +294,7 @@ void ase_shutdown(void)
  *    int  --- 0: Success
  *             else:        Error Code
  */
-int ase_start(int pp32)
+static int ase_start(int pp32)
 {
     int ret;
 
@@ -320,7 +320,7 @@ int ase_start(int pp32)
  *  Output:
  *    none
  */
-void ase_stop(int pp32)
+static void ase_stop(int pp32)
 {
     /*  halt PP32   */
     IFX_REG_W32(DBG_CTRL_STOP, PP32_DBG_CTRL);

package/kernel/lantiq/ltq-atm/src/ifxmips_atm_ar9.c

@@ -185,7 +185,7 @@ static inline int pp32_download_code(u32 *code_src, unsigned int code_dword_len,
     return 0;
 }
 
-void ar9_fw_ver(unsigned int *major, unsigned int *minor)
+static void ar9_fw_ver(unsigned int *major, unsigned int *minor)
 {
     ASSERT(major != NULL, "pointer is NULL");
     ASSERT(minor != NULL, "pointer is NULL");
@@ -194,7 +194,7 @@ void ar9_fw_ver(unsigned int *major, unsigned int *minor)
     *minor = FW_VER_ID->minor;
 }
 
-int ar9_init(struct platform_device *pdev)
+static int ar9_init(struct platform_device *pdev)
 {
 	init_pmu();
 	reset_ppe(pdev);
@@ -205,7 +205,7 @@ int ar9_init(struct platform_device *pdev)
 	return 0;
 }
 
-void ar9_shutdown(void)
+static void ar9_shutdown(void)
 {
 	ltq_pmu_disable(IFX_PMU_MODULE_PPE_SLL01 |
 		IFX_PMU_MODULE_PPE_TC |
@@ -215,7 +215,7 @@ void ar9_shutdown(void)
 		IFX_PMU_MODULE_DSL_DFE);
 }
 
-int ar9_start(int pp32)
+static int ar9_start(int pp32)
 {
 	int ret;
 
@@ -231,7 +231,7 @@ int ar9_start(int pp32)
 	return 0;
 }
 
-void ar9_stop(int pp32)
+static void ar9_stop(int pp32)
 {
 	IFX_REG_W32(DBG_CTRL_STOP, PP32_DBG_CTRL(0));
 }

package/kernel/lantiq/ltq-atm/src/ifxmips_atm_danube.c

@@ -198,7 +198,7 @@ static void danube_shutdown(void)
 {
 }
 
-int danube_start(int pp32)
+static int danube_start(int pp32)
 {
 	int ret;
 
@@ -218,7 +218,7 @@ int danube_start(int pp32)
 	return 0;
 }
 
-void danube_stop(int pp32)
+static void danube_stop(int pp32)
 {
 	IFX_REG_W32(DBG_CTRL_STOP_SET(1), PP32_DBG_CTRL);
 }

package/kernel/lantiq/ltq-atm/src/ltq_atm.c

@@ -36,6 +36,7 @@
 #include <linux/init.h>
 #include <linux/ioctl.h>
 #include <linux/atmdev.h>
+#include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
 #include <linux/of_device.h>
 #include <linux/atm.h>
@@ -338,7 +339,8 @@ static int ppe_ioctl(struct atm_dev *dev, unsigned int cmd, void *arg)
 		break;
 
 	case PPE_ATM_MIB_VCC:   /*  VCC related MIB */
-		copy_from_user(&mib_vcc, arg, sizeof(mib_vcc));
+		if (copy_from_user(&mib_vcc, arg, sizeof(mib_vcc)))
+			return -EFAULT;
 		conn = find_vpivci(mib_vcc.vpi, mib_vcc.vci);
 		if (conn >= 0) {
 			mib_vcc.mib_vcc.aal5VccCrcErrors     = g_atm_priv_data.conn[conn].aal5_vcc_crc_err;
@@ -1894,7 +1896,6 @@ static struct platform_driver ltq_atm_driver = {
 	.remove = ltq_atm_remove,
 	.driver = {
 		.name = "atm",
-		.owner = THIS_MODULE,
 		.of_match_table = ltq_atm_match,
 	},
 };

package/kernel/lantiq/ltq-deu/Makefile

@@ -21,14 +21,14 @@ define KernelPackage/ltq-deu-template
   TITLE:=deu driver for $(1)
   URL:=http://www.lantiq.com/
   VARIANT:=$(1)
-  DEPENDS:=@TARGET_lantiq_$(2) +kmod-crypto-manager +kmod-crypto-des
+  DEPENDS:=@$(2) +kmod-crypto-manager +kmod-crypto-des
   FILES:=$(PKG_BUILD_DIR)/ltq_deu_$(1).ko
   AUTOLOAD:=$(call AutoProbe,ltq_deu_$(1))
 endef
 
-KernelPackage/ltq-deu-danube=$(call KernelPackage/ltq-deu-template,danube,xway)
-KernelPackage/ltq-deu-ar9=$(call KernelPackage/ltq-deu-template,ar9,xway)
-KernelPackage/ltq-deu-vr9=$(call KernelPackage/ltq-deu-template,vr9,xrx200)
+KernelPackage/ltq-deu-danube=$(call KernelPackage/ltq-deu-template,danube,TARGET_lantiq_xway)
+KernelPackage/ltq-deu-ar9=$(call KernelPackage/ltq-deu-template,ar9,TARGET_lantiq_xway)
+KernelPackage/ltq-deu-vr9=$(call KernelPackage/ltq-deu-template,vr9,(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy))
 
 define Build/Configure
 endef

package/kernel/lantiq/ltq-deu/src/ifxmips_aes.c

@@ -148,7 +148,7 @@ extern int disable_multiblock;
  *  \param key_len key lengths of 16, 24 and 32 bytes supported  
  *  \return -EINVAL - bad key length, 0 - SUCCESS
 */                                 
-int aes_set_key (struct crypto_tfm *tfm, const u8 *in_key, unsigned int key_len)
+static int aes_set_key (struct crypto_tfm *tfm, const u8 *in_key, unsigned int key_len)
 {
     struct aes_ctx *ctx = crypto_tfm_ctx(tfm);
 
@@ -177,7 +177,7 @@ int aes_set_key (struct crypto_tfm *tfm, const u8 *in_key, unsigned int key_len)
  *  \param key_len key lengths of 16, 24 and 32 bytes supported
  *  \return -EINVAL - bad key length, 0 - SUCCESS
 */
-int aes_set_key_skcipher (struct crypto_skcipher *tfm, const u8 *in_key, unsigned int key_len)
+static int aes_set_key_skcipher (struct crypto_skcipher *tfm, const u8 *in_key, unsigned int key_len)
 {
     return aes_set_key(crypto_skcipher_tfm(tfm), in_key, key_len);
 }
@@ -189,7 +189,7 @@ int aes_set_key_skcipher (struct crypto_skcipher *tfm, const u8 *in_key, unsigne
  *  \param ctx_arg crypto algo context  
  *  \return
 */
-void aes_set_key_hw (void *ctx_arg)
+static void aes_set_key_hw (void *ctx_arg)
 {
     /*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
     volatile struct aes_t *aes = (volatile struct aes_t *) AES_START;
@@ -343,7 +343,7 @@ void ifx_deu_aes (void *ctx_arg, u8 *out_arg, const u8 *in_arg,
  *  \return 0 - SUCCESS
  *          -EINVAL - bad key length
 */                                 
-int ctr_rfc3686_aes_set_key (struct crypto_tfm *tfm, const uint8_t *in_key, unsigned int key_len)
+static int ctr_rfc3686_aes_set_key (struct crypto_tfm *tfm, const uint8_t *in_key, unsigned int key_len)
 {
     struct aes_ctx *ctx = crypto_tfm_ctx(tfm);
 
@@ -376,7 +376,7 @@ int ctr_rfc3686_aes_set_key (struct crypto_tfm *tfm, const uint8_t *in_key, unsi
  *  \return 0 - SUCCESS
  *          -EINVAL - bad key length
 */
-int ctr_rfc3686_aes_set_key_skcipher (struct crypto_skcipher *tfm, const uint8_t *in_key, unsigned int key_len)
+static int ctr_rfc3686_aes_set_key_skcipher (struct crypto_skcipher *tfm, const uint8_t *in_key, unsigned int key_len)
 {
     return ctr_rfc3686_aes_set_key(crypto_skcipher_tfm(tfm), in_key, key_len);
 }
@@ -413,7 +413,7 @@ int ctr_rfc3686_aes_set_key_skcipher (struct crypto_skcipher *tfm, const uint8_t
  *  \param encdec 1 for encrypt; 0 for decrypt  
  *  \param inplace not used  
 */                                 
-void ifx_deu_aes_ecb (void *ctx, uint8_t *dst, const uint8_t *src,
+static void ifx_deu_aes_ecb (void *ctx, uint8_t *dst, const uint8_t *src,
         uint8_t *iv, size_t nbytes, int encdec, int inplace)
 {
      ifx_deu_aes (ctx, dst, src, NULL, nbytes, encdec, 0);
@@ -430,7 +430,7 @@ void ifx_deu_aes_ecb (void *ctx, uint8_t *dst, const uint8_t *src,
  *  \param encdec 1 for encrypt; 0 for decrypt  
  *  \param inplace not used  
 */                                 
-void ifx_deu_aes_cbc (void *ctx, uint8_t *dst, const uint8_t *src,
+static void ifx_deu_aes_cbc (void *ctx, uint8_t *dst, const uint8_t *src,
         uint8_t *iv, size_t nbytes, int encdec, int inplace)
 {
      ifx_deu_aes (ctx, dst, src, iv, nbytes, encdec, 1);
@@ -447,7 +447,7 @@ void ifx_deu_aes_cbc (void *ctx, uint8_t *dst, const uint8_t *src,
  *  \param encdec 1 for encrypt; 0 for decrypt  
  *  \param inplace not used  
 */                                 
-void ifx_deu_aes_ofb (void *ctx, uint8_t *dst, const uint8_t *src,
+static void ifx_deu_aes_ofb (void *ctx, uint8_t *dst, const uint8_t *src,
         uint8_t *iv, size_t nbytes, int encdec, int inplace)
 {
      ifx_deu_aes (ctx, dst, src, iv, nbytes, encdec, 2);
@@ -464,7 +464,7 @@ void ifx_deu_aes_ofb (void *ctx, uint8_t *dst, const uint8_t *src,
  *  \param encdec 1 for encrypt; 0 for decrypt  
  *  \param inplace not used  
 */                                 
-void ifx_deu_aes_cfb (void *ctx, uint8_t *dst, const uint8_t *src,
+static void ifx_deu_aes_cfb (void *ctx, uint8_t *dst, const uint8_t *src,
         uint8_t *iv, size_t nbytes, int encdec, int inplace)
 {
      ifx_deu_aes (ctx, dst, src, iv, nbytes, encdec, 3);
@@ -481,7 +481,7 @@ void ifx_deu_aes_cfb (void *ctx, uint8_t *dst, const uint8_t *src,
  *  \param encdec 1 for encrypt; 0 for decrypt  
  *  \param inplace not used  
 */                                 
-void ifx_deu_aes_ctr (void *ctx, uint8_t *dst, const uint8_t *src,
+static void ifx_deu_aes_ctr (void *ctx, uint8_t *dst, const uint8_t *src,
         uint8_t *iv, size_t nbytes, int encdec, int inplace)
 {
      ifx_deu_aes (ctx, dst, src, iv, nbytes, encdec, 4);
@@ -494,7 +494,7 @@ void ifx_deu_aes_ctr (void *ctx, uint8_t *dst, const uint8_t *src,
  *  \param out output bytestream
  *  \param in input bytestream
 */
-void ifx_deu_aes_encrypt (struct crypto_tfm *tfm, uint8_t *out, const uint8_t *in)
+static void ifx_deu_aes_encrypt (struct crypto_tfm *tfm, uint8_t *out, const uint8_t *in)
 {
     struct aes_ctx *ctx = crypto_tfm_ctx(tfm);
     ifx_deu_aes (ctx, out, in, NULL, AES_BLOCK_SIZE,
@@ -508,7 +508,7 @@ void ifx_deu_aes_encrypt (struct crypto_tfm *tfm, uint8_t *out, const uint8_t *i
  *  \param out output bytestream
  *  \param in input bytestream
 */
-void ifx_deu_aes_decrypt (struct crypto_tfm *tfm, uint8_t *out, const uint8_t *in)
+static void ifx_deu_aes_decrypt (struct crypto_tfm *tfm, uint8_t *out, const uint8_t *in)
 {
     struct aes_ctx *ctx = crypto_tfm_ctx(tfm);
     ifx_deu_aes (ctx, out, in, NULL, AES_BLOCK_SIZE,
@@ -544,7 +544,7 @@ struct crypto_alg ifxdeu_aes_alg = {
  *  \param req skcipher request
  *  \return err
 */
-int ecb_aes_encrypt(struct skcipher_request *req)
+static int ecb_aes_encrypt(struct skcipher_request *req)
 {
     struct aes_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
     struct skcipher_walk walk;
@@ -570,7 +570,7 @@ int ecb_aes_encrypt(struct skcipher_request *req)
  *  \param req skcipher request
  *  \return err
 */
-int ecb_aes_decrypt(struct skcipher_request *req)
+static int ecb_aes_decrypt(struct skcipher_request *req)
 {
     struct aes_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
     struct skcipher_walk walk;
@@ -615,7 +615,7 @@ struct skcipher_alg ifxdeu_ecb_aes_alg = {
  *  \param req skcipher request
  *  \return err
 */
-int cbc_aes_encrypt(struct skcipher_request *req)
+static int cbc_aes_encrypt(struct skcipher_request *req)
 {
     struct aes_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
     struct skcipher_walk walk;
@@ -642,7 +642,7 @@ int cbc_aes_encrypt(struct skcipher_request *req)
  *  \param req skcipher request
  *  \return err
 */
-int cbc_aes_decrypt(struct skcipher_request *req)
+static int cbc_aes_decrypt(struct skcipher_request *req)
 {
     struct aes_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
     struct skcipher_walk walk;
@@ -694,7 +694,7 @@ struct skcipher_alg ifxdeu_cbc_aes_alg = {
  *  \param encdec 1 for encrypt; 0 for decrypt
  *
 */
-void ifx_deu_aes_xts (void *ctx_arg, u8 *out_arg, const u8 *in_arg,
+static void ifx_deu_aes_xts (void *ctx_arg, u8 *out_arg, const u8 *in_arg,
         u8 *iv_arg, size_t nbytes, int encdec)
 {
     /*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
@@ -797,7 +797,7 @@ void ifx_deu_aes_xts (void *ctx_arg, u8 *out_arg, const u8 *in_arg,
  *  \param req skcipher request
  *  \return err
 */
-int xts_aes_encrypt(struct skcipher_request *req)
+static int xts_aes_encrypt(struct skcipher_request *req)
 {
     struct aes_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
     struct skcipher_walk walk;
@@ -853,7 +853,7 @@ int xts_aes_encrypt(struct skcipher_request *req)
  *  \param req skcipher request
  *  \return err
 */
-int xts_aes_decrypt(struct skcipher_request *req)
+static int xts_aes_decrypt(struct skcipher_request *req)
 {
     struct aes_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
     struct skcipher_walk walk;
@@ -911,7 +911,7 @@ int xts_aes_decrypt(struct skcipher_request *req)
  *  \param key_len key lengths of 16, 24 and 32 bytes supported
  *  \return -EINVAL - bad key length, 0 - SUCCESS
 */
-int xts_aes_set_key_skcipher (struct crypto_skcipher *tfm, const u8 *in_key, unsigned int key_len)
+static int xts_aes_set_key_skcipher (struct crypto_skcipher *tfm, const u8 *in_key, unsigned int key_len)
 {
     struct aes_ctx *ctx = crypto_tfm_ctx(crypto_skcipher_tfm(tfm));
     unsigned int keylen = (key_len / 2);
@@ -958,7 +958,7 @@ struct skcipher_alg ifxdeu_xts_aes_alg = {
  *  \param req skcipher request
  *  \return err
 */
-int ofb_aes_encrypt(struct skcipher_request *req)
+static int ofb_aes_encrypt(struct skcipher_request *req)
 {
     struct aes_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
     struct skcipher_walk walk;
@@ -991,7 +991,7 @@ int ofb_aes_encrypt(struct skcipher_request *req)
  *  \param req skcipher request
  *  \return err
 */
-int ofb_aes_decrypt(struct skcipher_request *req)
+static int ofb_aes_decrypt(struct skcipher_request *req)
 {
     struct aes_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
     struct skcipher_walk walk;
@@ -1046,7 +1046,7 @@ struct skcipher_alg ifxdeu_ofb_aes_alg = {
  *  \param req skcipher request
  *  \return err
 */
-int cfb_aes_encrypt(struct skcipher_request *req)
+static int cfb_aes_encrypt(struct skcipher_request *req)
 {
     struct aes_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
     struct skcipher_walk walk;
@@ -1079,7 +1079,7 @@ int cfb_aes_encrypt(struct skcipher_request *req)
  *  \param req skcipher request
  *  \return err
 */
-int cfb_aes_decrypt(struct skcipher_request *req)
+static int cfb_aes_decrypt(struct skcipher_request *req)
 {
     struct aes_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
     struct skcipher_walk walk;
@@ -1134,7 +1134,7 @@ struct skcipher_alg ifxdeu_cfb_aes_alg = {
  *  \param req skcipher request
  *  \return err
 */
-int ctr_basic_aes_encrypt(struct skcipher_request *req)
+static int ctr_basic_aes_encrypt(struct skcipher_request *req)
 {
     struct aes_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
     struct skcipher_walk walk;
@@ -1167,7 +1167,7 @@ int ctr_basic_aes_encrypt(struct skcipher_request *req)
  *  \param req skcipher request
  *  \return err
 */
-int ctr_basic_aes_decrypt(struct skcipher_request *req)
+static int ctr_basic_aes_decrypt(struct skcipher_request *req)
 {
     struct aes_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
     struct skcipher_walk walk;
@@ -1221,7 +1221,7 @@ struct skcipher_alg ifxdeu_ctr_basic_aes_alg = {
  *  \param req skcipher request
  *  \return err
 */
-int ctr_rfc3686_aes_encrypt(struct skcipher_request *req)
+static int ctr_rfc3686_aes_encrypt(struct skcipher_request *req)
 {
     struct aes_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
     struct skcipher_walk walk;
@@ -1264,7 +1264,7 @@ int ctr_rfc3686_aes_encrypt(struct skcipher_request *req)
  *  \param req skcipher request
  *  \return err
 */
-int ctr_rfc3686_aes_decrypt(struct skcipher_request *req)
+static int ctr_rfc3686_aes_decrypt(struct skcipher_request *req)
 {
     struct aes_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
     struct skcipher_walk walk;
@@ -1576,7 +1576,7 @@ static struct shash_alg ifxdeu_cbcmac_aes_alg = {
  *  \param key_len key lengths of 16, 24 and 32 bytes supported
  *  \return -EINVAL - bad key length, 0 - SUCCESS
 */
-int aes_set_key_aead (struct crypto_aead *aead, const u8 *in_key, unsigned int key_len)
+static int aes_set_key_aead (struct crypto_aead *aead, const u8 *in_key, unsigned int key_len)
 {
     struct aes_ctx *ctx = crypto_aead_ctx(aead);
     int err;
@@ -1601,7 +1601,7 @@ int aes_set_key_aead (struct crypto_aead *aead, const u8 *in_key, unsigned int k
  *  \param in_key input authsize
  *  \return -EINVAL - bad authsize length, 0 - SUCCESS
 */
-int gcm_aes_setauthsize (struct crypto_aead *aead, unsigned int authsize)
+static int gcm_aes_setauthsize (struct crypto_aead *aead, unsigned int authsize)
 {
     return crypto_gcm_check_authsize(authsize);
 }
@@ -1612,7 +1612,7 @@ int gcm_aes_setauthsize (struct crypto_aead *aead, unsigned int authsize)
  *  \param req aead request
  *  \return err
 */
-int gcm_aes_encrypt(struct aead_request *req)
+static int gcm_aes_encrypt(struct aead_request *req)
 {
     struct aes_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
     struct skcipher_walk walk;
@@ -1726,7 +1726,7 @@ int gcm_aes_encrypt(struct aead_request *req)
  *  \param req aead request
  *  \return err
 */
-int gcm_aes_decrypt(struct aead_request *req)
+static int gcm_aes_decrypt(struct aead_request *req)
 {
     struct aes_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
     struct skcipher_walk walk;

package/kernel/lantiq/ltq-deu/src/ifxmips_des.c

@@ -126,7 +126,7 @@ extern int disable_deudma;
  *  \param key input key  
  *  \param keylen key length  
 */                                 
-int des_setkey(struct crypto_tfm *tfm, const u8 *key,
+static int des_setkey(struct crypto_tfm *tfm, const u8 *key,
                       unsigned int keylen)
 {
         struct ifx_deu_des_ctx *dctx = crypto_tfm_ctx(tfm);
@@ -161,7 +161,7 @@ int des_setkey(struct crypto_tfm *tfm, const u8 *key,
  *  \param key_len key lengths of 16, 24 and 32 bytes supported
  *  \return -EINVAL - bad key length, 0 - SUCCESS
 */
-int des_setkey_skcipher (struct crypto_skcipher *tfm, const u8 *in_key, unsigned int key_len)
+static int des_setkey_skcipher (struct crypto_skcipher *tfm, const u8 *in_key, unsigned int key_len)
 {
     return des_setkey(crypto_skcipher_tfm(tfm), in_key, key_len);
 }
@@ -296,7 +296,7 @@ void ifx_deu_des (void *ctx_arg, u8 *out_arg, const u8 *in_arg,
  *  \param encdec 1 for encrypt; 0 for decrypt  
  *  \param inplace not used  
 */
-void ifx_deu_des_ecb (void *ctx, uint8_t *dst, const uint8_t *src,
+static void ifx_deu_des_ecb (void *ctx, uint8_t *dst, const uint8_t *src,
                 uint8_t *iv, size_t nbytes, int encdec, int inplace)
 {
      ifx_deu_des (ctx, dst, src, NULL, nbytes, encdec, 0);
@@ -313,7 +313,7 @@ void ifx_deu_des_ecb (void *ctx, uint8_t *dst, const uint8_t *src,
  *  \param encdec 1 for encrypt; 0 for decrypt  
  *  \param inplace not used  
 */                                 
-void ifx_deu_des_cbc (void *ctx, uint8_t *dst, const uint8_t *src,
+static void ifx_deu_des_cbc (void *ctx, uint8_t *dst, const uint8_t *src,
                 uint8_t *iv, size_t nbytes, int encdec, int inplace)
 {
      ifx_deu_des (ctx, dst, src, iv, nbytes, encdec, 1);
@@ -330,11 +330,13 @@ void ifx_deu_des_cbc (void *ctx, uint8_t *dst, const uint8_t *src,
  *  \param encdec 1 for encrypt; 0 for decrypt  
  *  \param inplace not used  
 */                                 
-void ifx_deu_des_ofb (void *ctx, uint8_t *dst, const uint8_t *src,
+/*
+static void ifx_deu_des_ofb (void *ctx, uint8_t *dst, const uint8_t *src,
                 uint8_t *iv, size_t nbytes, int encdec, int inplace)
 {
      ifx_deu_des (ctx, dst, src, iv, nbytes, encdec, 2);
 }
+*/
 
 /*! \fn void ifx_deu_des_cfb (void *ctx, uint8_t *dst, const uint8_t *src, uint8_t *iv, size_t nbytes, int encdec, int inplace)
     \ingroup IFX_DES_FUNCTIONS
@@ -347,11 +349,13 @@ void ifx_deu_des_ofb (void *ctx, uint8_t *dst, const uint8_t *src,
     \param encdec 1 for encrypt; 0 for decrypt  
     \param inplace not used  
 */                                 
-void ifx_deu_des_cfb (void *ctx, uint8_t *dst, const uint8_t *src,
+/*
+static void ifx_deu_des_cfb (void *ctx, uint8_t *dst, const uint8_t *src,
                 uint8_t *iv, size_t nbytes, int encdec, int inplace)
 {
      ifx_deu_des (ctx, dst, src, iv, nbytes, encdec, 3);
 }
+*/
 
 /*! \fn void ifx_deu_des_ctr (void *ctx, uint8_t *dst, const uint8_t *src, uint8_t *iv, size_t nbytes, int encdec, int inplace)
  *  \ingroup IFX_DES_FUNCTIONS
@@ -364,11 +368,13 @@ void ifx_deu_des_cfb (void *ctx, uint8_t *dst, const uint8_t *src,
  *  \param encdec 1 for encrypt; 0 for decrypt  
  *  \param inplace not used  
 */                                 
+/*
 void ifx_deu_des_ctr (void *ctx, uint8_t *dst, const uint8_t *src,
                 uint8_t *iv, size_t nbytes, int encdec, int inplace)
 {
      ifx_deu_des (ctx, dst, src, iv, nbytes, encdec, 4);
 }
+*/
 
 /*! \fn void ifx_deu_des_encrypt (struct crypto_tfm *tfm, uint8_t *out, const uint8_t *in)
  *  \ingroup IFX_DES_FUNCTIONS
@@ -377,7 +383,7 @@ void ifx_deu_des_ctr (void *ctx, uint8_t *dst, const uint8_t *src,
  *  \param out output bytestream  
  *  \param in input bytestream  
 */                                               
-void ifx_deu_des_encrypt (struct crypto_tfm *tfm, uint8_t * out, const uint8_t * in)
+static void ifx_deu_des_encrypt (struct crypto_tfm *tfm, uint8_t * out, const uint8_t * in)
 {
      struct ifx_deu_des_ctx *ctx = crypto_tfm_ctx(tfm);
      ifx_deu_des (ctx, out, in, NULL, DES_BLOCK_SIZE,
@@ -392,7 +398,7 @@ void ifx_deu_des_encrypt (struct crypto_tfm *tfm, uint8_t * out, const uint8_t *
  *  \param out output bytestream  
  *  \param in input bytestream  
 */                                               
-void ifx_deu_des_decrypt (struct crypto_tfm *tfm, uint8_t * out, const uint8_t * in)
+static void ifx_deu_des_decrypt (struct crypto_tfm *tfm, uint8_t * out, const uint8_t * in)
 {
      struct ifx_deu_des_ctx *ctx = crypto_tfm_ctx(tfm);
      ifx_deu_des (ctx, out, in, NULL, DES_BLOCK_SIZE,
@@ -420,7 +426,7 @@ void ifx_deu_des_decrypt (struct crypto_tfm *tfm, uint8_t * out, const uint8_t *
  *  \param key input key  
  *  \param keylen key length  
 */                                 
-int des3_ede_setkey(struct crypto_tfm *tfm, const u8 *key,
+static int des3_ede_setkey(struct crypto_tfm *tfm, const u8 *key,
                     unsigned int keylen)
 {
         struct ifx_deu_des_ctx *dctx = crypto_tfm_ctx(tfm);
@@ -454,7 +460,7 @@ int des3_ede_setkey(struct crypto_tfm *tfm, const u8 *key,
  *  \param key input key
  *  \param keylen key length
 */
-int des3_ede_setkey_skcipher(struct crypto_skcipher *tfm, const u8 *key,
+static int des3_ede_setkey_skcipher(struct crypto_skcipher *tfm, const u8 *key,
                     unsigned int keylen)
 {
         return des3_ede_setkey(crypto_skcipher_tfm(tfm), key, keylen);
@@ -508,7 +514,7 @@ struct crypto_alg ifxdeu_des3_ede_alg = {
  *  \param req skcipher request
  *  \return err
 */
-int ecb_des_encrypt(struct skcipher_request *req)
+static int ecb_des_encrypt(struct skcipher_request *req)
 {
         struct ifx_deu_des_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
         struct skcipher_walk walk;
@@ -534,7 +540,7 @@ int ecb_des_encrypt(struct skcipher_request *req)
  *  \param req skcipher request
  *  \return err
 */
-int ecb_des_decrypt(struct skcipher_request *req)
+static int ecb_des_decrypt(struct skcipher_request *req)
 {
         struct ifx_deu_des_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
         struct skcipher_walk walk;
@@ -599,7 +605,7 @@ struct skcipher_alg ifxdeu_ecb_des3_ede_alg = {
  *  \param req skcipher request
  *  \return err
 */
-int cbc_des_encrypt(struct skcipher_request *req)
+static int cbc_des_encrypt(struct skcipher_request *req)
 {
         struct ifx_deu_des_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
         struct skcipher_walk walk;
@@ -627,7 +633,7 @@ int cbc_des_encrypt(struct skcipher_request *req)
  *  \param req skcipher request
  *  \return err
 */
-int cbc_des_decrypt(struct skcipher_request *req)
+static int cbc_des_decrypt(struct skcipher_request *req)
 {
         struct ifx_deu_des_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
         struct skcipher_walk walk;

package/kernel/lantiq/ltq-deu/src/ifxmips_deu.c

@@ -196,7 +196,6 @@ static struct platform_driver ltq_deu_driver = {
 	.remove = ltq_deu_remove,
 	.driver = {
 		.name = "deu",
-		.owner = THIS_MODULE,
 		.of_match_table = ltq_deu_match,
 	},
 };

package/kernel/lantiq/ltq-deu/src/ifxmips_deu_ar9.h

@@ -304,4 +304,7 @@ struct deu_dma_t {
 	} controlr;
 };
 
+u32 input_swap(u32 input);
+void chip_version(void);
+
 #endif /* IFXMIPS_DEU_AR9_H */