ap3825i

To flash: make run0 runs against /dev/ttyUSB0 on misbah, Martin's basement chromebox, to flash with whatever parameters are configured in the Makefile.

After flashing: you can run the following segment to turn a freshly flashed Gluon router into a configured one; notably, this reconfigures WAN to be uplink+mesh, not just uplink:

uci del_list gluon.iface_wan.role='mesh'
uci add_list gluon.iface_wan.role='mesh'
uci commit gluon

uci set gluon-setup-mode.@setup_mode[0].configured='1'
uci commit gluon-setup-mode

gluon-reconfigure
reboot

568 B Raw Blame History

ap3825i

568 B

Raw Blame History