| .. | ||
| README.md | ||
ap3825i
To flash: make run0 runs against /dev/ttyUSB0 on misbah, Martin's basement
chromebox, to flash with whatever parameters are configured in the Makefile.
After flashing: you can run the following segment to turn a freshly flashed Gluon router into a configured one; notably, this reconfigures WAN to be uplink+mesh, not just uplink:
uci del_list gluon.iface_wan.role='mesh'
uci add_list gluon.iface_wan.role='mesh'
uci commit gluon
uci set gluon-setup-mode.@setup_mode[0].configured='1'
uci commit gluon-setup-mode
gluon-reconfigure
reboot