cabf775e64
This was done by simply running `make kernel_menuconfig CONFIG_TARGET=subtarget` and then saving without changing any option. Having consistent kernel config is important to avoid surprises, such as the issue fixed with 6f0367c9 (where Xen support was silently disabled when building the kernel, although it was present in the initial config) As far as I understand the build system, this shouldn't have any user-visible impact, because the build system already merges the various kernel configs during build. Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
This is the buildsystem for the LEDE Linux distribution. Please use "make menuconfig" to choose your preferred configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers. Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/. Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your LEDE Community http://www.lede-project.org