ramips: nuke 2.6.39 support
SVN-Revision: 30651
This commit is contained in:
Gabor Juhos
parent
e2ea72515f
commit
18fdaee00b
@ -1,29 +0,0 @@
|
||||
--- a/arch/mips/kernel/traps.c
|
||||
+++ b/arch/mips/kernel/traps.c
|
||||
@@ -54,6 +54,7 @@
|
||||
#include <asm/types.h>
|
||||
#include <asm/stacktrace.h>
|
||||
#include <asm/uasm.h>
|
||||
+#include <asm/time.h>
|
||||
|
||||
extern void check_wait(void);
|
||||
extern asmlinkage void r4k_wait(void);
|
||||
@@ -1576,6 +1577,8 @@ void __cpuinit per_cpu_trap_init(void)
|
||||
if (cpu_has_mips_r2) {
|
||||
cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
|
||||
cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
|
||||
+ if (get_c0_compare_irq)
|
||||
+ cp0_compare_irq = get_c0_compare_irq();
|
||||
cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
|
||||
if (cp0_perfcount_irq == cp0_compare_irq)
|
||||
cp0_perfcount_irq = -1;
|
||||
--- a/arch/mips/include/asm/time.h
|
||||
+++ b/arch/mips/include/asm/time.h
|
||||
@@ -52,6 +52,7 @@ extern int (*perf_irq)(void);
|
||||
*/
|
||||
#ifdef CONFIG_CEVT_R4K_LIB
|
||||
extern unsigned int __weak get_c0_compare_int(void);
|
||||
+extern unsigned int __weak get_c0_compare_irq(void);
|
||||
extern int r4k_clockevent_init(void);
|
||||
#endif
|
||||
|
||||
@ -1,104 +0,0 @@
|
||||
From patchwork Tue Nov 8 14:59:01 2011
|
||||
Content-Type: text/plain; charset="utf-8"
|
||||
MIME-Version: 1.0
|
||||
Content-Transfer-Encoding: 7bit
|
||||
Subject: MIPS: Kernel hangs occasionally during boot.
|
||||
Date: Tue, 08 Nov 2011 13:59:01 -0000
|
||||
From: Al Cooper <alcooperx@gmail.com>
|
||||
X-Patchwork-Id: 2911
|
||||
Message-Id: <1320764341-4275-1-git-send-email-alcooperx@gmail.com>
|
||||
To: ralf@linux-mips.org, linux-mips@linux-mips.org,
|
||||
linux-kernel@vger.kernel.org
|
||||
Cc: "Al Cooper" <alcooperx@gmail.com>
|
||||
|
||||
The Kernel hangs occasionally during boot after
|
||||
"Calibrating delay loop..". This is caused by the
|
||||
c0_compare_int_usable() routine in cevt-r4k.c returning false which
|
||||
causes the system to disable the timer and hang later. The false
|
||||
return happens because the routine is using a series of four calls to
|
||||
irq_disable_hazard() as a delay while it waits for the timer changes
|
||||
to propagate to the cp0 cause register. On newer MIPS cores, like the 74K,
|
||||
the series of irq_disable_hazard() calls turn into ehb instructions and
|
||||
can take as little as a few clock ticks for all 4 instructions. This
|
||||
is not enough of a delay, so the routine thinks the timer is not working.
|
||||
This fix uses up to a max number of cycle counter ticks for the delay
|
||||
and uses back_to_back_c0_hazard() instead of irq_disable_hazard() to
|
||||
handle the hazard condition between cp0 writes and cp0 reads.
|
||||
|
||||
Signed-off-by: Al Cooper <alcooperx@gmail.com>
|
||||
|
||||
---
|
||||
arch/mips/kernel/cevt-r4k.c | 38 +++++++++++++++++++-------------------
|
||||
1 files changed, 19 insertions(+), 19 deletions(-)
|
||||
|
||||
--- a/arch/mips/kernel/cevt-r4k.c
|
||||
+++ b/arch/mips/kernel/cevt-r4k.c
|
||||
@@ -103,19 +103,10 @@ static int c0_compare_int_pending(void)
|
||||
|
||||
/*
|
||||
* Compare interrupt can be routed and latched outside the core,
|
||||
- * so a single execution hazard barrier may not be enough to give
|
||||
- * it time to clear as seen in the Cause register. 4 time the
|
||||
- * pipeline depth seems reasonably conservative, and empirically
|
||||
- * works better in configurations with high CPU/bus clock ratios.
|
||||
+ * so wait up to worst case number of cycle counter ticks for timer interrupt
|
||||
+ * changes to propagate to the cause register.
|
||||
*/
|
||||
-
|
||||
-#define compare_change_hazard() \
|
||||
- do { \
|
||||
- irq_disable_hazard(); \
|
||||
- irq_disable_hazard(); \
|
||||
- irq_disable_hazard(); \
|
||||
- irq_disable_hazard(); \
|
||||
- } while (0)
|
||||
+#define COMPARE_INT_SEEN_TICKS 50
|
||||
|
||||
int c0_compare_int_usable(void)
|
||||
{
|
||||
@@ -126,8 +117,12 @@ int c0_compare_int_usable(void)
|
||||
* IP7 already pending? Try to clear it by acking the timer.
|
||||
*/
|
||||
if (c0_compare_int_pending()) {
|
||||
- write_c0_compare(read_c0_count());
|
||||
- compare_change_hazard();
|
||||
+ cnt = read_c0_count();
|
||||
+ write_c0_compare(cnt);
|
||||
+ back_to_back_c0_hazard();
|
||||
+ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
|
||||
+ if (!c0_compare_int_pending())
|
||||
+ break;
|
||||
if (c0_compare_int_pending())
|
||||
return 0;
|
||||
}
|
||||
@@ -136,7 +131,7 @@ int c0_compare_int_usable(void)
|
||||
cnt = read_c0_count();
|
||||
cnt += delta;
|
||||
write_c0_compare(cnt);
|
||||
- compare_change_hazard();
|
||||
+ back_to_back_c0_hazard();
|
||||
if ((int)(read_c0_count() - cnt) < 0)
|
||||
break;
|
||||
/* increase delta if the timer was already expired */
|
||||
@@ -145,12 +140,17 @@ int c0_compare_int_usable(void)
|
||||
while ((int)(read_c0_count() - cnt) <= 0)
|
||||
; /* Wait for expiry */
|
||||
|
||||
- compare_change_hazard();
|
||||
+ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
|
||||
+ if (c0_compare_int_pending())
|
||||
+ break;
|
||||
if (!c0_compare_int_pending())
|
||||
return 0;
|
||||
-
|
||||
- write_c0_compare(read_c0_count());
|
||||
- compare_change_hazard();
|
||||
+ cnt = read_c0_count();
|
||||
+ write_c0_compare(cnt);
|
||||
+ back_to_back_c0_hazard();
|
||||
+ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
|
||||
+ if (!c0_compare_int_pending())
|
||||
+ break;
|
||||
if (c0_compare_int_pending())
|
||||
return 0;
|
||||
|
||||
@ -1,20 +0,0 @@
|
||||
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
|
||||
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
|
||||
@@ -1631,7 +1631,7 @@ static int __xipram do_erase_chip(struct
|
||||
chip->erase_suspended = 0;
|
||||
}
|
||||
|
||||
- if (chip_ready(map, adr))
|
||||
+ if (chip_good(map, adr, map_word_ff(map)))
|
||||
break;
|
||||
|
||||
if (time_after(jiffies, timeo)) {
|
||||
@@ -1719,7 +1719,7 @@ static int __xipram do_erase_oneblock(st
|
||||
chip->erase_suspended = 0;
|
||||
}
|
||||
|
||||
- if (chip_ready(map, adr)) {
|
||||
+ if (chip_good(map, adr, map_word_ff(map))) {
|
||||
xip_enable(map, chip, adr);
|
||||
break;
|
||||
}
|
||||
@ -1,61 +0,0 @@
|
||||
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
|
||||
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
|
||||
@@ -39,7 +39,7 @@
|
||||
#include <linux/mtd/xip.h>
|
||||
|
||||
#define AMD_BOOTLOC_BUG
|
||||
-#define FORCE_WORD_WRITE 0
|
||||
+#define FORCE_WORD_WRITE 1
|
||||
|
||||
#define MAX_WORD_RETRIES 3
|
||||
|
||||
@@ -50,7 +50,9 @@
|
||||
|
||||
static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
|
||||
static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
|
||||
+#if !FORCE_WORD_WRITE
|
||||
static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
|
||||
+#endif
|
||||
static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
|
||||
static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
|
||||
static void cfi_amdstd_sync (struct mtd_info *);
|
||||
@@ -186,6 +188,7 @@ static void fixup_amd_bootblock(struct m
|
||||
}
|
||||
#endif
|
||||
|
||||
+#if !FORCE_WORD_WRITE
|
||||
static void fixup_use_write_buffers(struct mtd_info *mtd)
|
||||
{
|
||||
struct map_info *map = mtd->priv;
|
||||
@@ -195,6 +198,7 @@ static void fixup_use_write_buffers(stru
|
||||
mtd->write = cfi_amdstd_write_buffers;
|
||||
}
|
||||
}
|
||||
+#endif /* !FORCE_WORD_WRITE */
|
||||
|
||||
/* Atmel chips don't use the same PRI format as AMD chips */
|
||||
static void fixup_convert_atmel_pri(struct mtd_info *mtd)
|
||||
@@ -1377,6 +1381,7 @@ static int cfi_amdstd_write_words(struct
|
||||
/*
|
||||
* FIXME: interleaved mode not tested, and probably not supported!
|
||||
*/
|
||||
+#if !FORCE_WORD_WRITE
|
||||
static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
|
||||
unsigned long adr, const u_char *buf,
|
||||
int len)
|
||||
@@ -1487,7 +1492,6 @@ static int __xipram do_write_buffer(stru
|
||||
return ret;
|
||||
}
|
||||
|
||||
-
|
||||
static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
|
||||
size_t *retlen, const u_char *buf)
|
||||
{
|
||||
@@ -1566,6 +1570,7 @@ static int cfi_amdstd_write_buffers(stru
|
||||
|
||||
return 0;
|
||||
}
|
||||
+#endif /* !FORCE_WORD_WRITE */
|
||||
|
||||
|
||||
/*
|
||||
@ -1,39 +0,0 @@
|
||||
--- a/arch/mips/Kconfig
|
||||
+++ b/arch/mips/Kconfig
|
||||
@@ -84,6 +84,9 @@ config ATH79
|
||||
help
|
||||
Support for the Atheros AR71XX/AR724X/AR913X SoCs.
|
||||
|
||||
+config MIPS_RALINK
|
||||
+ bool "Ralink MIPS SoC based boards"
|
||||
+
|
||||
config BCM47XX
|
||||
bool "Broadcom BCM47XX based boards"
|
||||
select CEVT_R4K
|
||||
@@ -745,6 +748,7 @@ source "arch/mips/jazz/Kconfig"
|
||||
source "arch/mips/jz4740/Kconfig"
|
||||
source "arch/mips/lasat/Kconfig"
|
||||
source "arch/mips/pmc-sierra/Kconfig"
|
||||
+source "arch/mips/ralink/Kconfig"
|
||||
source "arch/mips/powertv/Kconfig"
|
||||
source "arch/mips/sgi-ip27/Kconfig"
|
||||
source "arch/mips/sibyte/Kconfig"
|
||||
@@ -1102,7 +1106,7 @@ config BOOT_ELF32
|
||||
|
||||
config MIPS_L1_CACHE_SHIFT
|
||||
int
|
||||
- default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL
|
||||
+ default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL || RALINK_RT288X
|
||||
default "6" if MIPS_CPU_SCACHE
|
||||
default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON
|
||||
default "5"
|
||||
--- a/arch/mips/Kbuild.platforms
|
||||
+++ b/arch/mips/Kbuild.platforms
|
||||
@@ -19,6 +19,7 @@ platforms += pmc-sierra
|
||||
platforms += pnx833x
|
||||
platforms += pnx8550
|
||||
platforms += powertv
|
||||
+platforms += ralink
|
||||
platforms += rb532
|
||||
platforms += sgi-ip22
|
||||
platforms += sgi-ip27
|
||||
@ -1,91 +0,0 @@
|
||||
--- a/drivers/tty/serial/8250.c
|
||||
+++ b/drivers/tty/serial/8250.c
|
||||
@@ -305,9 +305,9 @@ static const struct serial8250_config ua
|
||||
},
|
||||
};
|
||||
|
||||
-#if defined(CONFIG_MIPS_ALCHEMY)
|
||||
+#if defined(CONFIG_MIPS_ALCHEMY) || defined (CONFIG_SERIAL_8250_RT288X)
|
||||
|
||||
-/* Au1x00 UART hardware has a weird register layout */
|
||||
+/* Au1x00 and RT288x UART hardware has a weird register layout */
|
||||
static const u8 au_io_in_map[] = {
|
||||
[UART_RX] = 0,
|
||||
[UART_IER] = 2,
|
||||
@@ -597,8 +597,8 @@ static inline void _serial_dl_write(stru
|
||||
serial_outp(up, UART_DLM, value >> 8 & 0xff);
|
||||
}
|
||||
|
||||
-#if defined(CONFIG_MIPS_ALCHEMY)
|
||||
-/* Au1x00 haven't got a standard divisor latch */
|
||||
+#if defined(CONFIG_MIPS_ALCHEMY) || defined (CONFIG_SERIAL_8250_RT288X)
|
||||
+/* Au1x00 and RT288x haven't got a standard divisor latch */
|
||||
static int serial_dl_read(struct uart_8250_port *up)
|
||||
{
|
||||
if (up->port.iotype == UPIO_AU)
|
||||
@@ -805,22 +805,19 @@ static int size_fifo(struct uart_8250_po
|
||||
*/
|
||||
static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
|
||||
{
|
||||
- unsigned char old_dll, old_dlm, old_lcr;
|
||||
+ unsigned char old_lcr;
|
||||
+ unsigned int old_dl;
|
||||
unsigned int id;
|
||||
|
||||
old_lcr = serial_inp(p, UART_LCR);
|
||||
serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_A);
|
||||
|
||||
- old_dll = serial_inp(p, UART_DLL);
|
||||
- old_dlm = serial_inp(p, UART_DLM);
|
||||
+ old_dl = serial_dl_read(p);
|
||||
|
||||
- serial_outp(p, UART_DLL, 0);
|
||||
- serial_outp(p, UART_DLM, 0);
|
||||
+ serial_dl_write(p, 0);
|
||||
+ id = serial_dl_read(p);
|
||||
|
||||
- id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8;
|
||||
-
|
||||
- serial_outp(p, UART_DLL, old_dll);
|
||||
- serial_outp(p, UART_DLM, old_dlm);
|
||||
+ serial_dl_write(p, old_dl);
|
||||
serial_outp(p, UART_LCR, old_lcr);
|
||||
|
||||
return id;
|
||||
@@ -946,7 +943,7 @@ static int broken_efr(struct uart_8250_p
|
||||
/*
|
||||
* Exar ST16C2550 "A2" devices incorrectly detect as
|
||||
* having an EFR, and report an ID of 0x0201. See
|
||||
- * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
|
||||
+ * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
|
||||
*/
|
||||
if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16)
|
||||
return 1;
|
||||
--- a/drivers/tty/serial/Kconfig
|
||||
+++ b/drivers/tty/serial/Kconfig
|
||||
@@ -258,6 +258,14 @@ config SERIAL_8250_ACORN
|
||||
system, say Y to this option. The driver can handle 1, 2, or 3 port
|
||||
cards. If unsure, say N.
|
||||
|
||||
+config SERIAL_8250_RT288X
|
||||
+ bool "Ralink RT288x/RT305x/RT3883 serial port support"
|
||||
+ depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X || SOC_RT3883)
|
||||
+ help
|
||||
+ If you have a Ralink RT288x/RT305x SoC based board and want to use the
|
||||
+ serial port, say Y to this option. The driver can handle up to 2 serial
|
||||
+ ports. If unsure, say N.
|
||||
+
|
||||
config SERIAL_8250_RM9K
|
||||
bool "Support for MIPS RM9xxx integrated serial port"
|
||||
depends on SERIAL_8250 != n && SERIAL_RM9000
|
||||
--- a/include/linux/serial_core.h
|
||||
+++ b/include/linux/serial_core.h
|
||||
@@ -311,7 +311,7 @@ struct uart_port {
|
||||
#define UPIO_HUB6 (1)
|
||||
#define UPIO_MEM (2)
|
||||
#define UPIO_MEM32 (3)
|
||||
-#define UPIO_AU (4) /* Au1x00 type IO */
|
||||
+#define UPIO_AU (4) /* Au1x00 and RT288x type IO */
|
||||
#define UPIO_TSI (5) /* Tsi108/109 type IO */
|
||||
#define UPIO_DWAPB (6) /* DesignWare APB UART */
|
||||
#define UPIO_RM9000 (7) /* RM9000 type IO */
|
||||
@ -1,10 +0,0 @@
|
||||
--- a/arch/mips/pci/Makefile
|
||||
+++ b/arch/mips/pci/Makefile
|
||||
@@ -55,6 +55,7 @@ obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capc
|
||||
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
|
||||
obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
|
||||
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o
|
||||
+obj-$(CONFIG_SOC_RT288X) += pci-rt288x.o
|
||||
|
||||
ifdef CONFIG_PCI_MSI
|
||||
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o
|
||||
@ -1,30 +0,0 @@
|
||||
--- a/drivers/net/Kconfig
|
||||
+++ b/drivers/net/Kconfig
|
||||
@@ -494,6 +494,17 @@ config MIPS_AU1X00_ENET
|
||||
If you have an Alchemy Semi AU1X00 based system
|
||||
say Y. Otherwise, say N.
|
||||
|
||||
+config MIPS_RAMIPS_NET
|
||||
+ tristate "Ethernet driver for rt288x/rt305x"
|
||||
+ depends on MIPS_RALINK
|
||||
+ select PHYLIB if (SOC_RT288X || SOC_RT3883)
|
||||
+ help
|
||||
+ This driver supports the etehrnet mac inside the ralink wisocs
|
||||
+
|
||||
+config RAMIPS_ETH_DEBUG
|
||||
+ bool "Enable debug messages in the Ralink ethernet driver"
|
||||
+ depends on MIPS_RAMIPS_NET
|
||||
+
|
||||
config SGI_IOC3_ETH
|
||||
bool "SGI IOC3 Ethernet"
|
||||
depends on PCI && SGI_IP27
|
||||
--- a/drivers/net/Makefile
|
||||
+++ b/drivers/net/Makefile
|
||||
@@ -227,6 +227,7 @@ obj-$(CONFIG_KORINA) += korina.o
|
||||
obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
|
||||
obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
|
||||
obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
|
||||
+obj-$(CONFIG_MIPS_RAMIPS_NET) += ramips.o
|
||||
obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
|
||||
obj-$(CONFIG_DECLANCE) += declance.o
|
||||
obj-$(CONFIG_ATARILANCE) += atarilance.o
|
||||
@ -1,26 +0,0 @@
|
||||
--- a/drivers/watchdog/Kconfig
|
||||
+++ b/drivers/watchdog/Kconfig
|
||||
@@ -990,6 +990,13 @@ config BCM63XX_WDT
|
||||
To compile this driver as a loadable module, choose M here.
|
||||
The module will be called bcm63xx_wdt.
|
||||
|
||||
+config RAMIPS_WDT
|
||||
+ tristate "Ralink RT288X/RT305X Watchdog Timer"
|
||||
+ depends on SOC_RT288X || SOC_RT305X || SOC_RT3883
|
||||
+ help
|
||||
+ Hardware driver for the built-in watchdog timer on the
|
||||
+ Ralink RT288X/RT305X SoCs.
|
||||
+
|
||||
# PARISC Architecture
|
||||
|
||||
# POWERPC Architecture
|
||||
--- a/drivers/watchdog/Makefile
|
||||
+++ b/drivers/watchdog/Makefile
|
||||
@@ -123,6 +123,7 @@ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
|
||||
obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
|
||||
obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
|
||||
octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
|
||||
+obj-$(CONFIG_RAMIPS_WDT) += ramips_wdt.o
|
||||
|
||||
# PARISC Architecture
|
||||
|
||||
@ -1,25 +0,0 @@
|
||||
--- a/drivers/spi/Kconfig
|
||||
+++ b/drivers/spi/Kconfig
|
||||
@@ -310,6 +310,12 @@ config SPI_PXA2XX
|
||||
config SPI_PXA2XX_PCI
|
||||
def_bool SPI_PXA2XX && X86_32 && PCI
|
||||
|
||||
+config SPI_RAMIPS
|
||||
+ tristate "Ralink RT288x/RT305x SPI Controller"
|
||||
+ depends on (SOC_RT288X || SOC_RT305X) && SPI_MASTER
|
||||
+ help
|
||||
+ This selects a driver for the Ralink RT288x/RT305x SPI Controller.
|
||||
+
|
||||
config SPI_S3C24XX
|
||||
tristate "Samsung S3C24XX series SPI"
|
||||
depends on ARCH_S3C2410 && EXPERIMENTAL
|
||||
--- a/drivers/spi/Makefile
|
||||
+++ b/drivers/spi/Makefile
|
||||
@@ -42,6 +42,7 @@ obj-$(CONFIG_SPI_FSL_LIB) += spi_fsl_li
|
||||
obj-$(CONFIG_SPI_FSL_ESPI) += spi_fsl_espi.o
|
||||
obj-$(CONFIG_SPI_FSL_SPI) += spi_fsl_spi.o
|
||||
obj-$(CONFIG_SPI_PPC4xx) += spi_ppc4xx.o
|
||||
+obj-$(CONFIG_SPI_RAMIPS) += ramips_spi.o
|
||||
obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
|
||||
obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx_hw.o
|
||||
obj-$(CONFIG_SPI_S3C64XX) += spi_s3c64xx.o
|
||||
@ -1,16 +0,0 @@
|
||||
--- a/drivers/usb/Kconfig
|
||||
+++ b/drivers/usb/Kconfig
|
||||
@@ -164,4 +164,6 @@ source "drivers/usb/gadget/Kconfig"
|
||||
|
||||
source "drivers/usb/otg/Kconfig"
|
||||
|
||||
+source "drivers/usb/dwc_otg/Kconfig"
|
||||
+
|
||||
endif # USB_SUPPORT
|
||||
--- a/drivers/usb/Makefile
|
||||
+++ b/drivers/usb/Makefile
|
||||
@@ -45,3 +45,4 @@ obj-$(CONFIG_EARLY_PRINTK_DBGP) += early
|
||||
|
||||
obj-$(CONFIG_USB_ATM) += atm/
|
||||
obj-$(CONFIG_USB_SPEEDTOUCH) += atm/
|
||||
+obj-$(CONFIG_DWC_OTG) += dwc_otg/
|
||||
@ -1,10 +0,0 @@
|
||||
--- a/arch/mips/pci/Makefile
|
||||
+++ b/arch/mips/pci/Makefile
|
||||
@@ -56,6 +56,7 @@ obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
|
||||
obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
|
||||
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o
|
||||
obj-$(CONFIG_SOC_RT288X) += pci-rt288x.o
|
||||
+obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
|
||||
|
||||
ifdef CONFIG_PCI_MSI
|
||||
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o
|
||||
@ -1,32 +0,0 @@
|
||||
--- a/drivers/usb/host/Kconfig
|
||||
+++ b/drivers/usb/host/Kconfig
|
||||
@@ -202,6 +202,15 @@ config USB_CNS3XXX_EHCI
|
||||
It is needed for high-speed (480Mbit/sec) USB 2.0 device
|
||||
support.
|
||||
|
||||
+config USB_EHCI_RT3883
|
||||
+ bool "EHCI support for Ralink RT3662/RT3883 SoCs"
|
||||
+ depends on USB_EHCI_HCD && SOC_RT3883
|
||||
+ select USB_EHCI_ROOT_HUB_TT
|
||||
+ default y
|
||||
+ ---help---
|
||||
+ Enables support for the built-in EHCI controller present
|
||||
+ on the Ralink RT3883 SoC.
|
||||
+
|
||||
config USB_OXU210HP_HCD
|
||||
tristate "OXU210HP HCD support"
|
||||
depends on USB
|
||||
--- a/drivers/usb/host/ehci-hcd.c
|
||||
+++ b/drivers/usb/host/ehci-hcd.c
|
||||
@@ -1267,6 +1267,11 @@ MODULE_LICENSE ("GPL");
|
||||
#define PLATFORM_DRIVER tegra_ehci_driver
|
||||
#endif
|
||||
|
||||
+#ifdef CONFIG_USB_EHCI_RT3883
|
||||
+#include "ehci-rt3883.c"
|
||||
+#define PLATFORM_DRIVER ehci_rt3883_driver
|
||||
+#endif
|
||||
+
|
||||
#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
|
||||
!defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
|
||||
!defined(XILINX_OF_PLATFORM_DRIVER)
|
||||
@ -1,31 +0,0 @@
|
||||
--- a/drivers/usb/host/Kconfig
|
||||
+++ b/drivers/usb/host/Kconfig
|
||||
@@ -296,6 +296,14 @@ config USB_OHCI_HCD_OMAP3
|
||||
Enables support for the on-chip OHCI controller on
|
||||
OMAP3 and later chips.
|
||||
|
||||
+config USB_OHCI_RT3883
|
||||
+ bool "USB OHCI support for the Ralink RT3883 SoCs"
|
||||
+ depends on USB_OHCI_HCD && SOC_RT3883
|
||||
+ default y
|
||||
+ help
|
||||
+ Enables support for the built-in OHCI controller present on the
|
||||
+ Ralink RT3883 SoC.
|
||||
+
|
||||
config USB_OHCI_HCD_PPC_SOC
|
||||
bool "OHCI support for on-chip PPC USB controller"
|
||||
depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
|
||||
--- a/drivers/usb/host/ohci-hcd.c
|
||||
+++ b/drivers/usb/host/ohci-hcd.c
|
||||
@@ -1107,6 +1107,11 @@ MODULE_LICENSE ("GPL");
|
||||
#define PLATFORM_DRIVER ohci_hcd_cns3xxx_driver
|
||||
#endif
|
||||
|
||||
+#ifdef CONFIG_USB_OHCI_RT3883
|
||||
+#include "ohci-rt3883.c"
|
||||
+#define PLATFORM_DRIVER ohci_rt3883_driver
|
||||
+#endif
|
||||
+
|
||||
#if !defined(PCI_DRIVER) && \
|
||||
!defined(PLATFORM_DRIVER) && \
|
||||
!defined(OMAP1_PLATFORM_DRIVER) && \
|
||||
@ -1,120 +0,0 @@
|
||||
# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
||||
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
|
||||
CONFIG_ARCH_POPULATES_NODE_MAP=y
|
||||
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||
CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
# CONFIG_ATH79 is not set
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_CEVT_R4K=y
|
||||
CONFIG_CEVT_R4K_LIB=y
|
||||
CONFIG_CMDLINE="console=ttyS1,57600 rootfstype=squashfs,jffs2"
|
||||
CONFIG_CMDLINE_BOOL=y
|
||||
# CONFIG_CMDLINE_OVERRIDE is not set
|
||||
CONFIG_CPU_HAS_PREFETCH=y
|
||||
CONFIG_CPU_HAS_SYNC=y
|
||||
CONFIG_CPU_LITTLE_ENDIAN=y
|
||||
CONFIG_CPU_MIPS32=y
|
||||
# CONFIG_CPU_MIPS32_R1 is not set
|
||||
CONFIG_CPU_MIPS32_R2=y
|
||||
CONFIG_CPU_MIPSR2=y
|
||||
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
||||
CONFIG_CSRC_R4K=y
|
||||
CONFIG_CSRC_R4K_LIB=y
|
||||
CONFIG_DECOMPRESS_LZMA=y
|
||||
CONFIG_DMA_NONCOHERENT=y
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
CONFIG_GENERIC_ATOMIC64=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
||||
CONFIG_GENERIC_CMOS_UPDATE=y
|
||||
CONFIG_GENERIC_FIND_LAST_BIT=y
|
||||
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
CONFIG_GENERIC_IRQ_SHOW=y
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_HARDWARE_WATCHPOINTS=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
CONFIG_HAVE_ARCH_JUMP_LABEL=y
|
||||
CONFIG_HAVE_ARCH_KGDB=y
|
||||
CONFIG_HAVE_C_RECORDMCOUNT=y
|
||||
CONFIG_HAVE_DMA_API_DEBUG=y
|
||||
CONFIG_HAVE_DMA_ATTRS=y
|
||||
CONFIG_HAVE_DYNAMIC_FTRACE=y
|
||||
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
|
||||
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
|
||||
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
||||
CONFIG_HAVE_GENERIC_HARDIRQS=y
|
||||
CONFIG_HAVE_IDE=y
|
||||
CONFIG_HAVE_IRQ_WORK=y
|
||||
CONFIG_HAVE_OPROFILE=y
|
||||
CONFIG_HAVE_PERF_EVENTS=y
|
||||
CONFIG_HW_HAS_PCI=y
|
||||
CONFIG_HW_RANDOM=m
|
||||
CONFIG_IMAGE_CMDLINE_HACK=y
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_IP17XX_PHY=y
|
||||
CONFIG_IRQ_CPU=y
|
||||
# CONFIG_LEDS_GPIO is not set
|
||||
CONFIG_MACH_NO_WESTBRIDGE=y
|
||||
# CONFIG_MII is not set
|
||||
# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
|
||||
CONFIG_MIPS=y
|
||||
CONFIG_MIPS_L1_CACHE_SHIFT=4
|
||||
CONFIG_MIPS_MACHINE=y
|
||||
CONFIG_MIPS_MT_DISABLED=y
|
||||
CONFIG_MIPS_RALINK=y
|
||||
CONFIG_MIPS_RAMIPS_NET=y
|
||||
# CONFIG_MTD_CFI_INTELEXT is not set
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_NEED_DMA_MAP_STATE=y
|
||||
CONFIG_NEED_PER_CPU_KM=y
|
||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
CONFIG_PERF_USE_VMALLOC=y
|
||||
CONFIG_PHYLIB=y
|
||||
# CONFIG_PREEMPT_RCU is not set
|
||||
# CONFIG_QUOTACTL is not set
|
||||
CONFIG_RALINK_DEV_GPIO_BUTTONS=y
|
||||
CONFIG_RALINK_DEV_GPIO_LEDS=y
|
||||
CONFIG_RALINK_RT288X=y
|
||||
# CONFIG_RALINK_RT305X is not set
|
||||
# CONFIG_RALINK_RT3883 is not set
|
||||
# CONFIG_RAMIPS_ETH_DEBUG is not set
|
||||
CONFIG_RAMIPS_WDT=y
|
||||
CONFIG_RT288X_MACH_F5D8235_V1=y
|
||||
CONFIG_RT288X_MACH_RT_N15=y
|
||||
CONFIG_RT288X_MACH_V11ST_FE=y
|
||||
CONFIG_RT288X_MACH_WLI_TX4_AG300N=y
|
||||
CONFIG_RT288X_MACH_WZR_AGL300NH=y
|
||||
CONFIG_RTL8366S_PHY=y
|
||||
CONFIG_RTL8366_SMI=y
|
||||
# CONFIG_SCSI_DMA is not set
|
||||
CONFIG_SERIAL_8250_NR_UARTS=4
|
||||
CONFIG_SERIAL_8250_RT288X=y
|
||||
# CONFIG_SLAB is not set
|
||||
CONFIG_SLUB=y
|
||||
CONFIG_SOC_RT288X=y
|
||||
CONFIG_SWCONFIG=y
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
|
||||
CONFIG_SYS_HAS_EARLY_PRINTK=y
|
||||
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
||||
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
||||
CONFIG_USB_SUPPORT=y
|
||||
CONFIG_XZ_DEC=y
|
||||
CONFIG_ZONE_DMA_FLAG=0
|
||||
@ -1,140 +0,0 @@
|
||||
# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
||||
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
|
||||
CONFIG_ARCH_POPULATES_NODE_MAP=y
|
||||
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||
CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
# CONFIG_ATH79 is not set
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_CEVT_R4K=y
|
||||
CONFIG_CEVT_R4K_LIB=y
|
||||
CONFIG_CMDLINE="console=ttyS1,57600 rootfstype=squashfs,jffs2"
|
||||
CONFIG_CMDLINE_BOOL=y
|
||||
# CONFIG_CMDLINE_OVERRIDE is not set
|
||||
CONFIG_CPU_HAS_PREFETCH=y
|
||||
CONFIG_CPU_HAS_SYNC=y
|
||||
CONFIG_CPU_LITTLE_ENDIAN=y
|
||||
CONFIG_CPU_MIPS32=y
|
||||
# CONFIG_CPU_MIPS32_R1 is not set
|
||||
CONFIG_CPU_MIPS32_R2=y
|
||||
CONFIG_CPU_MIPSR2=y
|
||||
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
||||
CONFIG_CSRC_R4K=y
|
||||
CONFIG_CSRC_R4K_LIB=y
|
||||
CONFIG_DECOMPRESS_LZMA=y
|
||||
CONFIG_DMA_NONCOHERENT=y
|
||||
# CONFIG_DWC_OTG is not set
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
CONFIG_GENERIC_ATOMIC64=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
||||
CONFIG_GENERIC_CMOS_UPDATE=y
|
||||
CONFIG_GENERIC_FIND_LAST_BIT=y
|
||||
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
CONFIG_GENERIC_IRQ_SHOW=y
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_HARDWARE_WATCHPOINTS=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
CONFIG_HAVE_ARCH_JUMP_LABEL=y
|
||||
CONFIG_HAVE_ARCH_KGDB=y
|
||||
CONFIG_HAVE_C_RECORDMCOUNT=y
|
||||
CONFIG_HAVE_DMA_API_DEBUG=y
|
||||
CONFIG_HAVE_DMA_ATTRS=y
|
||||
CONFIG_HAVE_DYNAMIC_FTRACE=y
|
||||
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
|
||||
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
|
||||
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
||||
CONFIG_HAVE_GENERIC_HARDIRQS=y
|
||||
CONFIG_HAVE_IDE=y
|
||||
CONFIG_HAVE_IRQ_WORK=y
|
||||
CONFIG_HAVE_OPROFILE=y
|
||||
CONFIG_HAVE_PERF_EVENTS=y
|
||||
CONFIG_HW_RANDOM=m
|
||||
CONFIG_IMAGE_CMDLINE_HACK=y
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_IRQ_CPU=y
|
||||
# CONFIG_LEDS_GPIO is not set
|
||||
CONFIG_M25PXX_USE_FAST_READ=y
|
||||
CONFIG_MACH_NO_WESTBRIDGE=y
|
||||
# CONFIG_MII is not set
|
||||
# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
|
||||
CONFIG_MIPS=y
|
||||
CONFIG_MIPS_L1_CACHE_SHIFT=5
|
||||
CONFIG_MIPS_MACHINE=y
|
||||
CONFIG_MIPS_MT_DISABLED=y
|
||||
CONFIG_MIPS_RALINK=y
|
||||
CONFIG_MIPS_RAMIPS_NET=y
|
||||
# CONFIG_MTD_CFI_INTELEXT is not set
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_M25P80=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_NEED_DMA_MAP_STATE=y
|
||||
CONFIG_NEED_PER_CPU_KM=y
|
||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
||||
CONFIG_PERF_USE_VMALLOC=y
|
||||
CONFIG_PHYLIB=y
|
||||
# CONFIG_PREEMPT_RCU is not set
|
||||
# CONFIG_QUOTACTL is not set
|
||||
CONFIG_RALINK_DEV_GPIO_BUTTONS=y
|
||||
CONFIG_RALINK_DEV_GPIO_LEDS=y
|
||||
# CONFIG_RALINK_RT288X is not set
|
||||
CONFIG_RALINK_RT305X=y
|
||||
# CONFIG_RALINK_RT3883 is not set
|
||||
# CONFIG_RAMIPS_ETH_DEBUG is not set
|
||||
CONFIG_RAMIPS_WDT=y
|
||||
CONFIG_RT305X_MACH_ALL0256N=y
|
||||
CONFIG_RT305X_MACH_ARGUS_ATP52B=y
|
||||
CONFIG_RT305X_MACH_BC2=y
|
||||
CONFIG_RT305X_MACH_DIR_300_REVB=y
|
||||
CONFIG_RT305X_MACH_ESR_9753=y
|
||||
CONFIG_RT305X_MACH_F5D8235_V2=y
|
||||
CONFIG_RT305X_MACH_FONERA20N=y
|
||||
CONFIG_RT305X_MACH_HW550_3G=y
|
||||
CONFIG_RT305X_MACH_MOFI3500_3GN=y
|
||||
CONFIG_RT305X_MACH_NBG_419N=y
|
||||
CONFIG_RT305X_MACH_NW718=y
|
||||
CONFIG_RT305X_MACH_OMNI_EMB=y
|
||||
CONFIG_RT305X_MACH_PWH2004=y
|
||||
CONFIG_RT305X_MACH_RT_G32_REVB=y
|
||||
CONFIG_RT305X_MACH_SL_R7205=y
|
||||
CONFIG_RT305X_MACH_V22RW_2X2=y
|
||||
CONFIG_RT305X_MACH_W502U=y
|
||||
CONFIG_RT305X_MACH_WCR150GN=y
|
||||
CONFIG_RT305X_MACH_WHR_G300N=y
|
||||
CONFIG_RT305X_MACH_WL341V3=y
|
||||
CONFIG_RT305X_MACH_WL351=y
|
||||
CONFIG_RT305X_MACH_WR512_3GN=y
|
||||
CONFIG_RT305X_MACH_WR6202=y
|
||||
# CONFIG_SCSI_DMA is not set
|
||||
CONFIG_SERIAL_8250_NR_UARTS=4
|
||||
CONFIG_SERIAL_8250_RT288X=y
|
||||
# CONFIG_SLAB is not set
|
||||
CONFIG_SLUB=y
|
||||
CONFIG_SOC_RT305X=y
|
||||
CONFIG_SPI=y
|
||||
# CONFIG_SPI_BITBANG is not set
|
||||
# CONFIG_SPI_GPIO is not set
|
||||
CONFIG_SPI_MASTER=y
|
||||
CONFIG_SPI_RAMIPS=y
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
|
||||
CONFIG_SYS_HAS_EARLY_PRINTK=y
|
||||
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
||||
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
||||
# CONFIG_USB_ARCH_HAS_EHCI is not set
|
||||
# CONFIG_USB_ARCH_HAS_OHCI is not set
|
||||
CONFIG_USB_SUPPORT=y
|
||||
CONFIG_XZ_DEC=y
|
||||
CONFIG_ZONE_DMA_FLAG=0
|
||||
@ -1,115 +0,0 @@
|
||||
# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
||||
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
|
||||
CONFIG_ARCH_POPULATES_NODE_MAP=y
|
||||
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||
CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
# CONFIG_ATH79 is not set
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_CEVT_R4K=y
|
||||
CONFIG_CEVT_R4K_LIB=y
|
||||
CONFIG_CMDLINE="console=ttyS1,57600 rootfstype=squashfs,jffs2"
|
||||
CONFIG_CMDLINE_BOOL=y
|
||||
# CONFIG_CMDLINE_OVERRIDE is not set
|
||||
CONFIG_CPU_HAS_PREFETCH=y
|
||||
CONFIG_CPU_HAS_SYNC=y
|
||||
CONFIG_CPU_LITTLE_ENDIAN=y
|
||||
CONFIG_CPU_MIPS32=y
|
||||
# CONFIG_CPU_MIPS32_R1 is not set
|
||||
CONFIG_CPU_MIPS32_R2=y
|
||||
CONFIG_CPU_MIPSR2=y
|
||||
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
||||
CONFIG_CSRC_R4K=y
|
||||
CONFIG_CSRC_R4K_LIB=y
|
||||
CONFIG_DECOMPRESS_LZMA=y
|
||||
CONFIG_DMA_NONCOHERENT=y
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
CONFIG_GENERIC_ATOMIC64=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
||||
CONFIG_GENERIC_CMOS_UPDATE=y
|
||||
CONFIG_GENERIC_FIND_LAST_BIT=y
|
||||
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
CONFIG_GENERIC_IRQ_SHOW=y
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_HARDWARE_WATCHPOINTS=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
CONFIG_HAVE_ARCH_JUMP_LABEL=y
|
||||
CONFIG_HAVE_ARCH_KGDB=y
|
||||
CONFIG_HAVE_C_RECORDMCOUNT=y
|
||||
CONFIG_HAVE_DMA_API_DEBUG=y
|
||||
CONFIG_HAVE_DMA_ATTRS=y
|
||||
CONFIG_HAVE_DYNAMIC_FTRACE=y
|
||||
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
|
||||
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
|
||||
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
||||
CONFIG_HAVE_GENERIC_HARDIRQS=y
|
||||
CONFIG_HAVE_IDE=y
|
||||
CONFIG_HAVE_IRQ_WORK=y
|
||||
CONFIG_HAVE_OPROFILE=y
|
||||
CONFIG_HAVE_PERF_EVENTS=y
|
||||
CONFIG_HW_HAS_PCI=y
|
||||
CONFIG_HW_RANDOM=m
|
||||
CONFIG_IMAGE_CMDLINE_HACK=y
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_IRQ_CPU=y
|
||||
# CONFIG_LEDS_GPIO is not set
|
||||
CONFIG_MACH_NO_WESTBRIDGE=y
|
||||
# CONFIG_MII is not set
|
||||
# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
|
||||
CONFIG_MIPS=y
|
||||
CONFIG_MIPS_L1_CACHE_SHIFT=5
|
||||
CONFIG_MIPS_MACHINE=y
|
||||
CONFIG_MIPS_MT_DISABLED=y
|
||||
CONFIG_MIPS_RALINK=y
|
||||
CONFIG_MIPS_RAMIPS_NET=y
|
||||
# CONFIG_MTD_CFI_INTELEXT is not set
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_NEED_DMA_MAP_STATE=y
|
||||
CONFIG_NEED_PER_CPU_KM=y
|
||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
CONFIG_PERF_USE_VMALLOC=y
|
||||
CONFIG_PHYLIB=y
|
||||
# CONFIG_PREEMPT_RCU is not set
|
||||
# CONFIG_QUOTACTL is not set
|
||||
CONFIG_RALINK_DEV_GPIO_BUTTONS=y
|
||||
CONFIG_RALINK_DEV_GPIO_LEDS=y
|
||||
# CONFIG_RALINK_RT288X is not set
|
||||
# CONFIG_RALINK_RT305X is not set
|
||||
CONFIG_RALINK_RT3883=y
|
||||
# CONFIG_RAMIPS_ETH_DEBUG is not set
|
||||
CONFIG_RAMIPS_WDT=y
|
||||
CONFIG_RT3883_MACH_RT_N56U=y
|
||||
CONFIG_RTL8366_SMI=y
|
||||
CONFIG_RTL8367_PHY=y
|
||||
# CONFIG_SCSI_DMA is not set
|
||||
CONFIG_SERIAL_8250_NR_UARTS=4
|
||||
CONFIG_SERIAL_8250_RT288X=y
|
||||
# CONFIG_SLAB is not set
|
||||
CONFIG_SLUB=y
|
||||
CONFIG_SOC_RT3883=y
|
||||
CONFIG_SWCONFIG=y
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
|
||||
CONFIG_SYS_HAS_EARLY_PRINTK=y
|
||||
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
||||
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
||||
CONFIG_USB_SUPPORT=y
|
||||
CONFIG_XZ_DEC=y
|
||||
CONFIG_ZONE_DMA_FLAG=0
|
||||
Loading…
Reference in New Issue
Block a user