openwrt-mirror

mirror of git://git.openwrt.org/openwrt/openwrt.git synced 2025-12-08 05:32:09 -05:00

Go to file

John Crispin bd164f233c mpc85xx: add 3.14 kernel support for mpc85xx platform This patch adds 3.14 kernel support for the mpc85xx platform. Works fine here with a TL-WDR4900 which seems to be the only supported device using this platform. There might be differences depending on HW version, therefore I'd ask others to test too. Changes to 3.10 missing config options added to 3.14 config file patch 001: rebased patch 100: rebased patch 110: rebased patch 120: rebased patch 130: rebased patch 140: minor adjustment patch 200: removed, change went upstream patch 210: rebased patch 220: removed, change went upstream patch 750: new, fixes an issue with ethernet port autoneg being disabled due to changes in kernel phy handling Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 43308		2014-11-19 09:20:55 +00:00
config	config: use PARTUUID by default on x86_64	2014-10-27 14:35:39 +00:00
docs	docs: update remaining references to functions.sh	2012-12-20 15:29:33 +00:00
include	kernel: update kernel 3.18 to rc4	2014-11-10 22:51:30 +00:00
package	ralink: merge the mt7620a/n subtargets	2014-11-19 09:19:38 +00:00
scripts	scripts/om-fwupgradecfg-gen.sh: add support for the MR900	2014-11-14 16:54:23 +00:00
target	mpc85xx: add 3.14 kernel support for mpc85xx platform	2014-11-19 09:20:55 +00:00
toolchain	toolchain: fix mips64 musl linker names	2014-10-24 00:15:58 +00:00
tools	ramips: add support for A5-V11 board (resubmit)	2014-10-29 11:01:17 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	add git-src to .gitignore	2014-01-12 12:06:39 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	move menuconfig options into separate files	2013-11-22 14:30:40 +00:00
feeds.conf.default	feeds: switch LuCI to Github repo	2014-10-09 21:27:26 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	Revert "build: use ONESHELL to speed up scanning and the toplevel makefile"	2014-10-22 10:47:26 +00:00
README	Add 'subversion' build dependency to README	2014-08-31 12:06:32 +00:00
rules.mk	rules.mk: reduce shexport to one line to allow it to be put in a target context	2014-10-22 08:57:20 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org