OpenWrt v25.12.0-rc5: adjust config defaults

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

config/Config-kernel.in

@@ -1181,6 +1181,7 @@ config KERNEL_NET_L3_MASTER_DEV
 config KERNEL_DCB
 	bool "Data Center Bridging support"
 	default y if TARGET_armsr_armv8
+	default y if TARGET_microchipsw
 	default y if TARGET_x86_64
 	help
 	  This enables support for configuring Data Center Bridging (DCB)

feeds.conf.default

@@ -1,8 +1,5 @@
-src-git packages https://git.openwrt.org/feed/packages.git
-src-git luci https://git.openwrt.org/project/luci.git
-src-git routing https://git.openwrt.org/feed/routing.git
-src-git telephony https://git.openwrt.org/feed/telephony.git
-src-git video https://github.com/openwrt/video.git
-#src-git targets https://github.com/openwrt/targets.git
-#src-git oldpackages http://git.openwrt.org/packages.git
-#src-link custom /usr/src/openwrt/custom-feed
+src-git packages https://git.openwrt.org/feed/packages.git^f1aecb34330f0c92da61919ca8afc109034f867b
+src-git luci https://git.openwrt.org/project/luci.git^355a432ef90e34a56661dd1d998b203ae8a76283
+src-git routing https://git.openwrt.org/feed/routing.git^5a276c7e3a647299f0bbf9cd0ee92800f8ba9cf8
+src-git telephony https://git.openwrt.org/feed/telephony.git^2618106d5846a4a542fdf5809f0d3ed228ce439b
+src-git video https://github.com/openwrt/video.git^094bf58da6682f895255a35a84349a79dab4bf95

include/cmake.mk

@@ -89,8 +89,8 @@ endif
 define Build/Configure/Default
 	mkdir -p $(CMAKE_BINARY_DIR)
 	(cd $(CMAKE_BINARY_DIR); \
-		CFLAGS="$(TARGET_CFLAGS) $(EXTRA_CFLAGS)" \
-		CXXFLAGS="$(TARGET_CXXFLAGS) $(EXTRA_CXXFLAGS)" \
+		CFLAGS="$(TARGET_CFLAGS) $(EXTRA_CFLAGS) $(TARGET_CPPFLAGS) $(EXTRA_CPPFLAGS)" \
+		CXXFLAGS="$(TARGET_CXXFLAGS) $(EXTRA_CXXFLAGS) $(TARGET_CPPFLAGS) $(EXTRA_CPPFLAGS)" \
 		LDFLAGS="$(TARGET_LDFLAGS) $(EXTRA_LDFLAGS)" \
 		cmake \
 			--no-warn-unused-cli \

include/image.mk

@@ -41,6 +41,9 @@ KDIR=$(KERNEL_BUILD_DIR)
 KDIR_TMP=$(KDIR)/tmp
 DTS_DIR:=$(LINUX_DIR)/arch/$(LINUX_KARCH)/boot/dts
 
+ifeq ($(EXTRA_IMAGE_NAME),)
+EXTRA_IMAGE_NAME:=$(call qstrip,$(CONFIG_EXTRA_IMAGE_NAME))
+endif
 IMG_PREFIX_EXTRA:=$(if $(EXTRA_IMAGE_NAME),$(call sanitize,$(EXTRA_IMAGE_NAME))-)
 IMG_PREFIX_VERNUM:=$(if $(CONFIG_VERSION_FILENAMES),$(call sanitize,$(VERSION_NUMBER))-)
 IMG_PREFIX_VERCODE:=$(if $(CONFIG_VERSION_CODE_FILENAMES),$(call sanitize,$(VERSION_CODE))-)
@@ -114,6 +117,7 @@ fs-types-$(CONFIG_TARGET_ROOTFS_JFFS2_NAND) += $(addprefix jffs2-nand-,$(NAND_BL
 fs-types-$(CONFIG_TARGET_ROOTFS_EXT4FS) += ext4
 fs-types-$(CONFIG_TARGET_ROOTFS_UBIFS) += ubifs
 fs-types-$(CONFIG_TARGET_ROOTFS_EROFS) += erofs
+fs-types-$(CONFIG_TARGET_ROOTFS_TARGZ) += targz
 fs-subtypes-$(CONFIG_TARGET_ROOTFS_JFFS2) += $(addsuffix -raw,$(addprefix jffs2-,$(JFFS2_BLOCKSIZE)))
 
 TARGET_FILESYSTEMS := $(fs-types-y)
@@ -326,6 +330,12 @@ define Image/mkfs/erofs
 		$@ $(call mkfs_target_dir,$(1))
 endef
 
+define Image/mkfs/targz
+	$(TAR) -cp --numeric-owner --owner=0 --group=0 --mode=a-s --sort=name \
+		$(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+		-C $(call mkfs_target_dir,$(1)) . | gzip -9n > $@
+endef
+
 define Image/Manifest
 	$(if $(CONFIG_USE_APK), \
 		$(call apk,$(TARGET_DIR_ORIG)) list --quiet --manifest --no-network \

include/kernel.mk

@@ -306,4 +306,3 @@ kernel_patchver_ge=$(call kernel_version_cmp,-ge,$(KERNEL_PATCHVER),$(1))
 kernel_patchver_eq=$(call kernel_version_cmp,-eq,$(KERNEL_PATCHVER),$(1))
 kernel_patchver_le=$(call kernel_version_cmp,-le,$(KERNEL_PATCHVER),$(1))
 kernel_patchver_lt=$(call kernel_version_cmp,-lt,$(KERNEL_PATCHVER),$(1))
-

include/package-pack.mk

@@ -78,6 +78,196 @@ define FixupDependencies
   $(call AddDependency,$(1),$$(DEPS))
 endef
 
+# Format dependencies and extra dependencies
+#
+# ABI-version EXTRA_DEPENDS so dependencies can be correctly looked up using the
+# existing semantics without the ABI specified. This is needed since ABI-
+# versioned libraries don't provide `${package_name}=${package_version}`, so
+# that same library but with different ABI versions can be installed side by
+# side.
+#
+# Remove duplicate dependencies when EXTRA_DEPENDS specifies a versioned one
+# that is already in DEPENDS.
+#
+# 1: list of dependencies
+# 2: list of extra dependencies
+define FormatDepends
+$(strip
+  $(eval _COMMA_SEP := __COMMA_SEP__)
+  $(eval _SPACE_SEP := __SPACE_SEP__)
+  $(eval _DEPENDS := $(1))
+  $(eval _EXTRA_DEPENDS_ABI := )
+  $(eval _DEP_ITEMS := $(subst $(_COMMA_SEP),$(space),$(subst $(space),$(_SPACE_SEP),$(subst $(comma),$(_COMMA_SEP),$(2)))))
+
+  $(foreach dep,$(_DEP_ITEMS),
+    $(eval _EXTRA_DEP := )
+    $(eval _CUR_DEP := $(subst $(_SPACE_SEP),$(space),$(strip $(dep))))
+    $(eval _PKG_NAME := $(word 1,$(_CUR_DEP)))
+    $(if $(findstring $(paren_left), $(_PKG_NAME)),
+      $(error "Unsupported extra dependency format: no space before '(': $(_CUR_DEP)"))
+    )
+    $(eval _ABI_SUFFIX := $(call GetABISuffix,$(_PKG_NAME)))
+    $(eval _PKG_NAME_ABI := $(_PKG_NAME)$(_ABI_SUFFIX))
+    $(eval _VERSION_CONSTRAINT := $(word 2,$(_CUR_DEP)))
+    $(if $(_VERSION_CONSTRAINT),
+      $(eval _EXTRA_DEP := $(_PKG_NAME_ABI) $(_VERSION_CONSTRAINT)),
+      $(error "Extra dependencies must have version constraints. $(_PKG_NAME) seems to be unversioned.")
+    )
+    $(if $(and $(_EXTRA_DEPENDS_ABI),$(_EXTRA_DEP)),
+      $(eval _EXTRA_DEPENDS_ABI := $(_EXTRA_DEPENDS_ABI)$(comma)$(_EXTRA_DEP)),
+      $(eval _EXTRA_DEPENDS_ABI := $(_EXTRA_DEP))
+    )
+    $(if $(_DEPENDS),
+      $(eval _DEPENDS := $(filter-out $(_PKG_NAME_ABI),$(_DEPENDS)))
+    )
+  )
+
+  $(eval _DEPENDS := $(call mergelist,$(_DEPENDS)))
+  $(_EXTRA_DEPENDS_ABI)$(if $(_DEPENDS),$(comma) $(_DEPENDS))
+)
+endef
+
+# Format provide and add ABI and version if it's not a virtual provide marked
+# with an @.
+#
+# Same as for the base package name, if ABI version is set, provide both
+# unversioned provide and one with ABI version and version.
+#
+# 1: provide name
+# 2: provide version
+# 3: (optional) ABI version
+define AddProvide
+$(strip
+  $(if $(filter @%,$(1)),
+    $(patsubst @%,%,$(1)),
+    $(if $(3),
+      $(1) $(1)$(call FormatABISuffix,$(1),$(3))=$(2),
+      $(1)=$(2)
+    )
+  )
+)
+endef
+
+# Remove virtual provides prefix and self. apk doesn't like it when packages
+# specify a redundant provide pointing to self.
+#
+# 1: package name
+# 2: list of provides
+define SanitizeProvides
+$(filter-out $(1),$(patsubst @%,%,$(2)))
+endef
+
+# Format provides both for apk and control
+#
+# - If ABI version is defined:
+#   - package is named `${package_name}${ABI_version}`
+#     if a `package_name` ends in a number, the `ABI_version` will be prefixed
+#     with a - sign, e.g.: libsqlite3-0
+#   - package implicitly provides
+#     `${package_name}${ABI_version}=${package_version}`
+#     this implies that only one version of a package per ABI can be installed
+#     at the same time
+#   - additionally provide `${package_name}` so multiple packages can be looked
+#     up by its base name
+#   - for each `provides`:
+#     - provide `${provide}${ABI_version}=${package_version}`
+#       this implies that only one version of a provide can be installed at the
+#       same time
+#     - if a `provide` ends in a number, the `ABI_version` will be prefixed with
+#       a - sign, e.g.: provide1-0
+#     - additionally provide `${provide}` so multiple packages can be looked up
+#       by its base name
+#
+# - else if ABI version is _not_ defined
+#   - package is named `${package_name}`
+#   - package implicitly provides `${package_name}=${package_version}`
+#     this implies that only one version of a package can be installed at the
+#     same time
+#   - for each `provides`, provide `${provide}=${package_version}` this implies
+#     that only one version of a provide can be installed at the same time
+#
+# - Both with and without an ABI, if a provide starts with an @, treat it as a
+#   virtual provide, that doesn't own the name by not appending version.
+#   Multiple packages with the same virtual provides can be installed
+#   side-by-side.
+#
+# - apk doesn't like it when packages specify a redundant provide pointing to
+#   self. Filter it out, but keep virtual self provides, in the form of
+#   @(kmod-)?${package_name}-any.
+#
+# - Packages implicitly add a virtual @${package_name}-any provide in Package,
+#   which implies that kmods, which are also packages, will have a virtual
+#   @kmod-${package_name}-any provide.
+#
+# - Aside from the two aforementioned implicit provides, packages are expected
+#   to manage their provides themselves.
+#
+# - When multiple variants inside the same package have the same provide, a
+#   default variant must be set using DEFAULT_VARIANT:=1.
+#
+# - Cross-package provides must be virtual and a default variant must be set. If
+#   different packages provide the same versioned (i.e. non-virtual) provide the
+#   package with a higher version will be preferred, which results in unintended
+#   behavior, because the order might change with package updates.
+#
+#   Example:
+#   - both uclient-fetch and wget provide wget
+#   - wget doesn't have a default variant called wget that would provide an
+#     implicit @wget-any
+#     - add wget to PROVIDES for both wget-ssl and wget-nossl variants so they
+#       can't be installed at the same time
+#     - add @wget-any to both packages so packages outside of wget can provide
+#       it
+#   - uclient-fetch has only one variant
+#     - add @wget-any to PROVIDES
+#     - mark uclient-fetch as the default variant using DEFAULT_VARIANT:=1
+#   - switch wget consumer that don't depend on a specific version like apk to
+#     depend on @wget-any
+#
+# - Alternatives don't affect the packaging.
+#
+# 1: package name
+# 2: package version
+# 3: ABI version
+# 4: list of provides
+define FormatProvides
+$(strip \
+  $(if $(call FormatABISuffix,$(1),$(3)), \
+    $(1) $(foreach provide, \
+      $(filter-out $(1),$(4)), \
+      $(call AddProvide,$(provide),$(2),$(3)) \
+    ), \
+    $(foreach provide, \
+      $(filter-out $(1),$(4)), \
+      $(call AddProvide,$(provide),$(2)) \
+    ) \
+  ) \
+)
+endef
+
+# Get apk provider priority
+#
+# - if a package is marked as a default variant, set it to 100.
+#
+# - if a package has an ABI version defined, set it to 10.
+#   The enables packages with an ABI version to be installed by their base name
+#   instead of a name and an ABI version, e.g.:
+#   libfoo3, where 3 is the ABI version can be installed by just libfoo.
+#   This affects manual installation only, as the dependency resolution takes
+#   care of ABI versions.
+#
+# - otherwise return nothing, i.e. package will have the default priority 0.
+#
+# 1: Default variant
+# 2: ABI version
+define GetProviderPriority
+$(strip
+  $(if $(1),100,
+    $(if $(2),10)
+  )
+)
+endef
+
 ifneq ($(PKG_NAME),toolchain)
   define CheckDependencies
 	@( \
@@ -191,17 +381,33 @@ endif
     $(STAGING_DIR_ROOT)/stamp/.$(1)_installed: $(PKG_BUILD_DIR)/.pkgdir/$(1).installed
 	mkdir -p $(STAGING_DIR_ROOT)/stamp
 	$(if $(ABI_VERSION),echo '$(ABI_VERSION)' | cmp -s - $(PKG_INFO_DIR)/$(1).version || { \
+		mkdir -p $(PKG_INFO_DIR); \
 		echo '$(ABI_VERSION)' > $(PKG_INFO_DIR)/$(1).version; \
-		$(foreach pkg,$(filter-out $(1),$(PROVIDES)), \
+		$(foreach pkg,$(call SanitizeProvides,$(1),$(PROVIDES)), \
 			cp $(PKG_INFO_DIR)/$(1).version $(PKG_INFO_DIR)/$(pkg).version; \
 		) \
 	} )
 	$(call locked,$(CP) $(PKG_BUILD_DIR)/.pkgdir/$(1)/. $(STAGING_DIR_ROOT)/,root-copy)
 	touch $$@
 
-    Package/$(1)/DEPENDS := $$(call mergelist,$$(foreach dep,$$(filter-out @%,$$(IDEPEND_$(1))),$$(dep)$$(call GetABISuffix,$$(dep))))
+    Package/$(1)/DEPENDS := $$(foreach dep,$$(filter-out @%,$$(IDEPEND_$(1))),$$(dep)$$(call GetABISuffix,$$(dep)))
     ifneq ($$(EXTRA_DEPENDS),)
-      Package/$(1)/DEPENDS := $$(EXTRA_DEPENDS)$$(if $$(Package/$(1)/DEPENDS),$$(comma) $$(Package/$(1)/DEPENDS))
+      ifeq ($(CONFIG_USE_APK),)
+        Package/$(1)/DEPENDS := $$(call mergelist,$$(Package/$(1)/DEPENDS))
+        Package/$(1)/DEPENDS := $$(EXTRA_DEPENDS)$$(if $$(Package/$(1)/DEPENDS),$$(comma) $$(Package/$(1)/DEPENDS))
+      else
+        Package/$(1)/DEPENDS := $$(call FormatDepends,$$(Package/$(1)/DEPENDS),$$(EXTRA_DEPENDS))
+      endif
+    else
+      Package/$(1)/DEPENDS := $$(call mergelist,$$(Package/$(1)/DEPENDS))
+    endif
+
+    ifeq ($(CONFIG_USE_APK),)
+      Package/$(1)/PROVIDES := $$(patsubst @%,%,$(PROVIDES))
+      Package/$(1)/PROVIDES := $$(filter-out $(1)$$(ABIV_$(1)),$$(Package/$(1)/PROVIDES)$$(if $$(ABIV_$(1)), $(1) $$(foreach provide,$$(Package/$(1)/PROVIDES),$$(provide)$$(ABIV_$(1)))))
+    else
+      Package/$(1)/PROVIDES := $$(call FormatProvides,$(1),$(VERSION),$(ABI_VERSION),$(PROVIDES))
+      Package/$(1)/PRIORITY := $$(call GetProviderPriority,$(DEFAULT_VARIANT),$(ABI_VERSION))
     endif
 
 $(_define) Package/$(1)/CONTROL
@@ -209,7 +415,7 @@ Package: $(1)$$(ABIV_$(1))
 Version: $(VERSION)
 $$(call addfield,Depends,$$(Package/$(1)/DEPENDS)
 )$$(call addfield,Conflicts,$$(call mergelist,$(CONFLICTS))
-)$$(call addfield,Provides,$$(call mergelist,$$(filter-out $(1)$$(ABIV_$(1)),$(PROVIDES)$$(if $$(ABIV_$(1)), $(1) $(foreach provide,$(PROVIDES),$(provide)$$(ABIV_$(1))))))
+)$$(call addfield,Provides,$$(call mergelist,$$(Package/$(1)/PROVIDES))
 )$$(call addfield,Alternatives,$$(call mergelist,$(ALTERNATIVES))
 )$$(call addfield,Source,$(SOURCE)
 )$$(call addfield,SourceName,$(PKG_NAME)
@@ -253,7 +459,7 @@ endif
 			fi; \
 		done; $(Package/$(1)/extra_provides) \
 	) | sort -u > $(PKG_INFO_DIR)/$(1).provides
-	$(if $(PROVIDES),@for pkg in $(filter-out $(1),$(PROVIDES)); do cp $(PKG_INFO_DIR)/$(1).provides $(PKG_INFO_DIR)/$$$$pkg.provides; done)
+	$(if $(PROVIDES),@for pkg in $(call SanitizeProvides,$(1),$(PROVIDES)); do cp $(PKG_INFO_DIR)/$(1).provides $(PKG_INFO_DIR)/$$$$pkg.provides; done)
 	$(CheckDependencies)
 
 	$(RSTRIP) $$(IDIR_$(1))
@@ -320,24 +526,24 @@ else
 		echo "[ -s "\$$$${IPKG_INSTROOT}/lib/functions.sh" ] || exit 0"; \
 		echo ". \$$$${IPKG_INSTROOT}/lib/functions.sh"; \
 		echo 'export root="$$$${IPKG_INSTROOT}"'; \
-		echo 'export pkgname="$(1)"'; \
+		echo 'export pkgname="$(1)$$(ABIV_$(1))"'; \
 		echo "add_group_and_user"; \
 		echo "default_postinst"; \
-		[ ! -f $$(ADIR_$(1))/postinst-pkg ] || sed -z 's/^\s*#!/#!/' "$$(ADIR_$(1))/postinst-pkg"; \
+		[ ! -f $$(ADIR_$(1))/postinst-pkg ] || sed '/^\s*#!/d' "$$(ADIR_$(1))/postinst-pkg"; \
 	) > $$(ADIR_$(1))/post-install;
 
     ifdef Package/$(1)/preinst
 	( \
 		echo "#!/bin/sh"; \
 		echo 'export PKG_UPGRADE=1'; \
-		[ ! -f $$(ADIR_$(1))/preinst ] || sed -z 's/^\s*#!/#!/' "$$(ADIR_$(1))/preinst"; \
+		[ ! -f $$(ADIR_$(1))/preinst ] || sed '/^\s*#!/d' "$$(ADIR_$(1))/preinst"; \
 	) > $$(ADIR_$(1))/pre-upgrade;
     endif
 
 	( \
 		echo "#!/bin/sh"; \
 		echo 'export PKG_UPGRADE=1'; \
-		[ ! -f $$(ADIR_$(1))/post-install ] || sed -z 's/^\s*#!/#!/' "$$(ADIR_$(1))/post-install"; \
+		[ ! -f $$(ADIR_$(1))/post-install ] || sed '/^\s*#!/d' "$$(ADIR_$(1))/post-install"; \
 	) > $$(ADIR_$(1))/post-upgrade;
 
 	( \
@@ -345,34 +551,34 @@ else
 		echo "[ -s "\$$$${IPKG_INSTROOT}/lib/functions.sh" ] || exit 0"; \
 		echo ". \$$$${IPKG_INSTROOT}/lib/functions.sh"; \
 		echo 'export root="$$$${IPKG_INSTROOT}"'; \
-		echo 'export pkgname="$(1)"'; \
+		echo 'export pkgname="$(1)$$(ABIV_$(1))"'; \
 		echo "default_prerm"; \
-		[ ! -f $$(ADIR_$(1))/prerm-pkg ] || sed -z 's/^\s*#!/#!/' "$$(ADIR_$(1))/prerm-pkg"; \
+		[ ! -f $$(ADIR_$(1))/prerm-pkg ] || sed '/^\s*#!/d' "$$(ADIR_$(1))/prerm-pkg"; \
 	) > $$(ADIR_$(1))/pre-deinstall;
 
 	[ ! -f $$(ADIR_$(1))/postrm ] || sed -zi 's/^\s*#!/#!/' "$$(ADIR_$(1))/postrm";
 
-	if [ -n "$(USERID)" ]; then echo $(USERID) > $$(IDIR_$(1))/lib/apk/packages/$(1).rusers; fi;
-	if [ -n "$(ALTERNATIVES)" ]; then echo $(ALTERNATIVES) > $$(IDIR_$(1))/lib/apk/packages/$(1).alternatives; fi;
-	(cd $$(IDIR_$(1)) && find . -type f,l -printf "/%P\n" | sort > $(TMP_DIR)/$(1).list && mv $(TMP_DIR)/$(1).list $$(IDIR_$(1))/lib/apk/packages/$(1).list)
+	if [ -n "$(USERID)" ]; then echo $(USERID) > $$(IDIR_$(1))/lib/apk/packages/$(1)$$(ABIV_$(1)).rusers; fi;
+	if [ -n "$(ALTERNATIVES)" ]; then echo $(ALTERNATIVES) > $$(IDIR_$(1))/lib/apk/packages/$(1)$$(ABIV_$(1)).alternatives; fi;
+	(cd $$(IDIR_$(1)) && find . -type f,l -printf "/%P\n" | sort > $(TMP_DIR)/$(1).list && mv $(TMP_DIR)/$(1).list $$(IDIR_$(1))/lib/apk/packages/$(1)$$(ABIV_$(1)).list)
 	# Move conffiles to IDIR and build conffiles_static with csums
 	if [ -f $$(ADIR_$(1))/conffiles ]; then \
-		mv -f $$(ADIR_$(1))/conffiles $$(IDIR_$(1))/lib/apk/packages/$(1).conffiles; \
-		for file in $$$$(cat $$(IDIR_$(1))/lib/apk/packages/$(1).conffiles); do \
+		mv -f $$(ADIR_$(1))/conffiles $$(IDIR_$(1))/lib/apk/packages/$(1)$$(ABIV_$(1)).conffiles; \
+		for file in $$$$(cat $$(IDIR_$(1))/lib/apk/packages/$(1)$$(ABIV_$(1)).conffiles); do \
 			[ -f $$(IDIR_$(1))/$$$$file ] || continue; \
 			csum=$$$$($(MKHASH) sha256 $$(IDIR_$(1))/$$$$file); \
-			echo $$$$file $$$$csum >> $$(IDIR_$(1))/lib/apk/packages/$(1).conffiles_static; \
+			echo $$$$file $$$$csum >> $$(IDIR_$(1))/lib/apk/packages/$(1)$$(ABIV_$(1)).conffiles_static; \
 		done; \
 	fi
 
 	# Some package (base-files) manually append stuff to conffiles
 	# Append stuff from it and delete the CONTROL directory since everything else should be migrated
 	if [ -f $$(IDIR_$(1))/CONTROL/conffiles ]; then \
-		echo $$$$(IDIR_$(1))/CONTROL/conffiles >> $$(IDIR_$(1))/lib/apk/packages/$(1).conffiles; \
+		echo $$$$(IDIR_$(1))/CONTROL/conffiles >> $$(IDIR_$(1))/lib/apk/packages/$(1)$$(ABIV_$(1)).conffiles; \
 		for file in $$$$(cat $$(IDIR_$(1))/CONTROL/conffiles); do \
 			[ -f $$(IDIR_$(1))/$$$$file ] || continue; \
 			csum=$$$$($(MKHASH) sha256 $$(IDIR_$(1))/$$$$file); \
-			echo $$$$file $$$$csum >> $$(IDIR_$(1))/lib/apk/packages/$(1).conffiles_static; \
+			echo $$$$file $$$$csum >> $$(IDIR_$(1))/lib/apk/packages/$(1)$$(ABIV_$(1)).conffiles_static; \
 		done; \
 		rm -rf $$(IDIR_$(1))/CONTROL/conffiles; \
 	fi
@@ -394,17 +600,8 @@ else
 	  --info "origin:$(SOURCE)" \
 	  --info "url:$(URL)" \
 	  --info "maintainer:$(MAINTAINER)" \
-	  --info "provides:$$(foreach prov,\
-			$$(filter-out $(1)$$(ABIV_$(1)), \
-			$(PROVIDES)$$(if $$(ABIV_$(1)), \
-				$(1)=$(VERSION) $(foreach provide, \
-					$(PROVIDES), \
-					$(provide)$$(ABIV_$(1))=$(VERSION) \
-				) \
-			) \
-		), \
-		$$(prov) )" \
-	  $(if $(DEFAULT_VARIANT),--info "provider-priority:100",$(if $(PROVIDES),--info "provider-priority:1")) \
+	  $$(if $$(Package/$(1)/PROVIDES),--info "provides:$$(Package/$(1)/PROVIDES)") \
+	  $$(if $$(Package/$(1)/PRIORITY),--info "provider-priority:$$(Package/$(1)/PRIORITY)") \
 	  $$(APK_SCRIPTS_$(1)) \
 	  --info "depends:$$(foreach depends,$$(subst $$(comma),$$(space),$$(subst $$(space),,$$(subst $$(paren_right),,$$(subst $$(paren_left),,$$(Package/$(1)/DEPENDS))))),$$(depends))" \
 	  --files "$$(IDIR_$(1))" \

include/package.mk

@@ -332,6 +332,13 @@ define BuildPackage
   $(eval $(Package/Default))
   $(eval $(Package/$(1)))
 
+  # Add an implicit self-provide. apk can't handle self provides, be it
+  # versioned or virtual, so opt for a suffix instead. This allows several
+  # variants to provide the same virtual package without adding extra provides
+  # to the default one, e.g. wget implicitly provides wget-any and is marked as
+  # default, so wget-ssl can explicitly provide @wget-any as well.
+  $(eval PROVIDES:=$(strip @$(1)-any $(PROVIDES)))
+
 ifdef DESCRIPTION
 $$(error DESCRIPTION:= is obsolete, use Package/PKG_NAME/description)
 endif

include/version.mk

@@ -27,13 +27,13 @@ PKG_CONFIG_DEPENDS += \
 sanitize = $(call tolower,$(subst _,-,$(subst $(space),-,$(1))))
 
 VERSION_NUMBER:=$(call qstrip,$(CONFIG_VERSION_NUMBER))
-VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),SNAPSHOT)
+VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),25.12.0-rc5)
 
 VERSION_CODE:=$(call qstrip,$(CONFIG_VERSION_CODE))
-VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),$(REVISION))
+VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),r32673-482ba7230a)
 
 VERSION_REPO:=$(call qstrip,$(CONFIG_VERSION_REPO))
-VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/snapshots)
+VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/releases/25.12.0-rc5)
 
 VERSION_DIST:=$(call qstrip,$(CONFIG_VERSION_DIST))
 VERSION_DIST:=$(if $(VERSION_DIST),$(VERSION_DIST),OpenWrt)

package/Makefile

@@ -129,6 +129,7 @@ $(curdir)/index: FORCE
 	@echo Generating package index...
 ifneq ($(CONFIG_USE_APK),)
 	@for d in $(PACKAGE_SUBDIRS); do \
+		set -e; \
 		mkdir -p $$d; \
 		cd $$d || continue; \
 		ls *.apk >/dev/null 2>&1 || continue; \

package/base-files/files/etc/uci-defaults/14_network-generate-duid

@@ -1,4 +1,4 @@
-[ "$(uci -q get network.globals.dhcp_default_duid)" != "auto" ] && exit 0
+[ "$(uci -q get network.globals.dhcp_default_duid || echo "auto")" != "auto" ] && exit 0
 
 uci -q batch <<-EOF >/dev/null
 	# DUID-UUID - RFC6355

package/base-files/files/etc/uci-defaults/15_migrate-time-zonename

@@ -0,0 +1,6 @@
+zonename="$(uci -q get system.@system[0].zonename)"
+case "$zonename" in
+        *[[:space:]]*) uci set system.@system[0].zonename="${zonename// /_}" ;;
+esac
+
+exit 0

package/base-files/files/lib/functions.sh

@@ -382,7 +382,7 @@ default_postinst() {
 			uci commit
 		fi
 
-		rm -f /tmp/luci-indexcache
+		rm -f /tmp/luci-indexcache.*
 	fi
 
 	if [ -f "$root/usr/lib/opkg/info/${pkgname}.postinst-pkg" ]; then

package/base-files/files/lib/functions/network.sh

@@ -24,6 +24,17 @@ __network_ifstatus() {
 	eval "$__tmp"
 }
 
+# determine the IAID of the given logical interface
+# 1: destination variable
+# 2: interface
+network_generate_iface_iaid() {
+	local __iaid
+
+	__iaid=$(printf '%s' "$2" | md5sum | cut -c 1-8)
+
+	export "$1=$__iaid"
+}
+
 # determine first IPv4 address of given logical interface
 # 1: destination variable
 # 2: interface

package/base-files/image-config.in

@@ -5,6 +5,14 @@
 # See /LICENSE for more information.
 #
 
+config EXTRA_IMAGE_NAME
+	string
+	prompt "Extra image filename" if IMAGEOPT
+	default ""
+	help
+		Add this to the output image filenames, to distinguish between
+		different builds for the same hardware type.
+
 config TARGET_DEFAULT_LAN_IP_FROM_PREINIT
 	bool "Use preinit IP configuration as default LAN IP" if IMAGEOPT
 	default n
@@ -190,7 +198,7 @@ if VERSIONOPT
 	config VERSION_REPO
 		string
 		prompt "Release repository"
-		default "https://downloads.openwrt.org/snapshots"
+		default "https://downloads.openwrt.org/releases/25.12.0-rc5"
 		help
 			This is the repository address embedded in the image, it defaults
 			to the trunk snapshot repo; the url may contain the following placeholders:
@@ -272,7 +280,7 @@ if VERSIONOPT
 	config VERSION_CODE_FILENAMES
 		bool
 		prompt "Revision code in filenames"
-		default y
+		default n
 		help
 			Enable this to include the revision identifier or the configured
 			version code into the firmware image, SDK- and Image Builder archive

package/boot/arm-trusted-firmware-mediatek/Makefile

@@ -30,6 +30,7 @@ define Trusted-Firmware-A/Default
   BOOT_DEVICE:=
   DDR3_FLYBY:=
   DDR3_FREQ_1866:=
+  DDR4_4BG_MODE:=
   DDR_TYPE:=
   NAND_TYPE:=
   BOARD_QFN:=
@@ -139,6 +140,14 @@ define Trusted-Firmware-A/mt7622-sdmmc-2ddr
   DDR3_FLYBY:=1
 endef
 
+define Trusted-Firmware-A/mt7981-nor-ddr4
+  NAME:=MediaTek MT7981 (SPI-NOR, DDR4)
+  BOOT_DEVICE:=nor
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7981
+  DDR_TYPE:=ddr4
+endef
+
 define Trusted-Firmware-A/mt7981-ram-ddr4
   NAME:=MediaTek MT7981 (RAM, DDR4)
   BOOT_DEVICE:=ram
@@ -158,6 +167,14 @@ define Trusted-Firmware-A/mt7981-emmc-ddr4
   DDR_TYPE:=ddr4
 endef
 
+define Trusted-Firmware-A/mt7981-sdmmc-ddr4
+  NAME:=MediaTek MT7981 (SD card, DDR4)
+  BOOT_DEVICE:=sdmmc
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7981
+  DDR_TYPE:=ddr4
+endef
+
 define Trusted-Firmware-A/mt7981-spim-nand-ddr4
   NAME:=MediaTek MT7981 (SPI-NAND via SPIM, DDR4)
   BOOT_DEVICE:=spim-nand
@@ -186,14 +203,6 @@ define Trusted-Firmware-A/mt7981-ram-ddr3
   DEFAULT:=TARGET_mediatek_filogic
 endef
 
-define Trusted-Firmware-A/mt7981-nor-ddr4
-  NAME:=MediaTek MT7981 (SPI-NOR, DDR4)
-  BOOT_DEVICE:=nor
-  BUILD_SUBTARGET:=filogic
-  PLAT:=mt7981
-  DDR_TYPE:=ddr4
-endef
-
 define Trusted-Firmware-A/mt7981-emmc-ddr3
   NAME:=MediaTek MT7981 (eMMC, DDR3)
   BOOT_DEVICE:=emmc
@@ -244,8 +253,17 @@ define Trusted-Firmware-A/mt7981-spim-nand-ddr3-1866mhz
   DDR3_FREQ_1866:=1
 endef
 
-define Trusted-Firmware-A/mt7981-cudy-tr3000-v1
-  NAME:=Cudy TR3000 v1 (SPI-NAND via SPIM, DDR3)
+define Trusted-Firmware-A/mt7981-spim-nand-ubi-ddr4
+  NAME:=MediaTek MT7981 (SPI-NAND via SPIM, DDR4)
+  BOOT_DEVICE:=spim-nand
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7981
+  DDR_TYPE:=ddr4
+  USE_UBI:=1
+endef
+
+define Trusted-Firmware-A/mt7981-cudy-ddr3
+  NAME:=Cudy (SPI-NAND via SPIM, DDR3)
   BOOT_DEVICE:=spim-nand
   BUILD_SUBTARGET:=filogic
   PLAT:=mt7981
@@ -265,15 +283,6 @@ define Trusted-Firmware-A/mt7986-ram-ddr4
   DEFAULT:=TARGET_mediatek_filogic
 endef
 
-define Trusted-Firmware-A/mt7981-spim-nand-ubi-ddr4
-  NAME:=MediaTek MT7981 (SPI-NAND via SPIM, DDR4)
-  BOOT_DEVICE:=spim-nand
-  BUILD_SUBTARGET:=filogic
-  PLAT:=mt7981
-  DDR_TYPE:=ddr4
-  USE_UBI:=1
-endef
-
 define Trusted-Firmware-A/mt7986-nor-ddr4
   NAME:=MediaTek MT7986 (SPI-NOR, DDR4)
   BOOT_DEVICE:=nor
@@ -399,7 +408,14 @@ define Trusted-Firmware-A/mt7987-emmc-comb
   BOOT_DEVICE:=emmc
   BUILD_SUBTARGET:=filogic
   PLAT:=mt7987
-  DRAM_USE_COMB:=1
+endef
+
+define Trusted-Firmware-A/mt7987-emmc-ddr4-4bg
+  NAME:=MediaTek MT7987 (eMMC, DDR4 4GB)
+  BOOT_DEVICE:=emmc
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7987
+  DDR4_4BG_MODE:=1
 endef
 
 define Trusted-Firmware-A/mt7987-nor-comb
@@ -407,7 +423,6 @@ define Trusted-Firmware-A/mt7987-nor-comb
   BOOT_DEVICE:=nor
   BUILD_SUBTARGET:=filogic
   PLAT:=mt7987
-  DRAM_USE_COMB:=1
 endef
 
 define Trusted-Firmware-A/mt7987-sdmmc-comb
@@ -415,7 +430,22 @@ define Trusted-Firmware-A/mt7987-sdmmc-comb
   BOOT_DEVICE:=sdmmc
   BUILD_SUBTARGET:=filogic
   PLAT:=mt7987
-  DRAM_USE_COMB:=1
+endef
+
+define Trusted-Firmware-A/mt7987-sdmmc-ddr4-4bg
+  NAME:=MediaTek MT7987 (SD card, DDR4 4GB)
+  BOOT_DEVICE:=sdmmc
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7987
+  DDR4_4BG_MODE:=1
+endef
+
+define Trusted-Firmware-A/mt7987-spim-nand0
+  NAME:=MediaTek MT7987 (SPI-NAND via SPIM)
+  BOOT_DEVICE:=spim-nand
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7987
+  SPIM_CTRL:=0
 endef
 
 define Trusted-Firmware-A/mt7987-spim-nand0-ubi-comb
@@ -423,7 +453,6 @@ define Trusted-Firmware-A/mt7987-spim-nand0-ubi-comb
   BOOT_DEVICE:=spim-nand
   BUILD_SUBTARGET:=filogic
   PLAT:=mt7987
-  DRAM_USE_COMB:=1
   USE_UBI:=1
   SPIM_CTRL:=0
 endef
@@ -433,7 +462,6 @@ define Trusted-Firmware-A/mt7987-spim-nand2-ubi-comb
   BOOT_DEVICE:=spim-nand
   BUILD_SUBTARGET:=filogic
   PLAT:=mt7987
-  DRAM_USE_COMB:=1
   USE_UBI:=1
   SPIM_CTRL:=2
 endef
@@ -443,7 +471,6 @@ define Trusted-Firmware-A/mt7987-ram-comb
   BOOT_DEVICE:=ram
   BUILD_SUBTARGET:=filogic
   PLAT:=mt7987
-  DRAM_USE_COMB:=1
   RAM_BOOT_UART_DL:=1
   HIDDEN:=
   DEFAULT:=TARGET_mediatek_filogic
@@ -643,8 +670,9 @@ TFA_TARGETS:= \
 	mt7981-spim-nand-ubi-ddr4 \
 	mt7981-ram-ddr4 \
 	mt7981-emmc-ddr4 \
+	mt7981-sdmmc-ddr4 \
 	mt7981-spim-nand-ddr4 \
-	mt7981-cudy-tr3000-v1 \
+	mt7981-cudy-ddr3 \
 	mt7986-ram-ddr3 \
 	mt7986-emmc-ddr3 \
 	mt7986-nor-ddr3 \
@@ -661,8 +689,11 @@ TFA_TARGETS:= \
 	mt7986-spim-nand-ubi-ddr4 \
 	mt7986-spim-nand-4k-ddr4 \
 	mt7987-emmc-comb \
+	mt7987-emmc-ddr4-4bg \
 	mt7987-nor-comb \
 	mt7987-sdmmc-comb \
+	mt7987-sdmmc-ddr4-4bg \
+	mt7987-spim-nand0 \
 	mt7987-spim-nand0-ubi-comb \
 	mt7987-spim-nand2-ubi-comb \
 	mt7987-ram-comb \
@@ -696,6 +727,7 @@ TFA_MAKE_FLAGS += \
 	HAVE_DRAM_OBJ_FILE=yes \
 	$(if $(DDR3_FLYBY),DDR3_FLYBY=1) \
 	$(if $(DDR3_FREQ_1866),DDR3_FREQ_1866=1) \
+	$(if $(DDR4_4BG_MODE),DDR4_4BG_MODE=1) \
 	$(if $(DRAM_USE_COMB),DRAM_USE_COMB=1) \
 	$(if $(RAM_BOOT_UART_DL),RAM_BOOT_UART_DL=1) \
 	$(if $(USE_UBI),UBI=1 $(if $(findstring mt7622,$(PLAT)),OVERRIDE_UBI_START_ADDR=0x80000)) \

package/boot/arm-trusted-firmware-microchipsw/Makefile

@@ -5,10 +5,11 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=https://github.com/microchip-ung/arm-trusted-firmware.git
-PKG_SOURCE_DATE:=2024-08-13
-PKG_SOURCE_VERSION:=67fcfcab71f78ac7d4af834c37b29f8c98dd5ff1
-PKG_MIRROR_HASH:=777c68273e84028de77750f3fe8a1219b02f01d43ce35948893ac642d8eb10d7
+PKG_SOURCE_DATE:=2026-01-07
+PKG_SOURCE_VERSION:=7696c9aaaae7c677f4c373a61a1289cba7f824aa
+PKG_MIRROR_HASH:=331548d7c73896bd5e4438c0ec9c71bbe58d3bf9a29350496ad94c382e922b9c
 
+PKG_BUILD_DEPENDS:=ruby/host
 PKG_MAINTAINER:=Robert Marko <robert.marko@sartura.hr>
 
 include $(INCLUDE_DIR)/kernel.mk
@@ -28,7 +29,17 @@ define Trusted-Firmware-A/ev23x71a
   DEPENDS:=+u-boot-ev23x71a
 endef
 
-TFA_TARGETS:= ev23x71a
+define Trusted-Firmware-A/tactical-1000
+  NAME:=Novarq Tactical 1000
+  BUILD_SUBTARGET:=lan969x
+  BUILD_DEVICES:=novarq_tactical-1000
+  PLAT:=novarq_tactical_1000_v3
+  DEPENDS:=+u-boot-tactical-1000
+endef
+
+TFA_TARGETS:= \
+	ev23x71a \
+	tactical-1000
 
 MBEDTLS_NAME:=mbedtls
 MBEDTLS_RELEASE:=2.28.10
@@ -52,17 +63,6 @@ define Build/Prepare
 	$(TAR) -C $(PKG_BUILD_DIR) -xf $(DL_DIR)/$(MBEDTLS_SOURCE)
 endef
 
-# We must not pass OPENSSL_DIR as locally built mbedtls is used
-define Build/Compile
-	+unset CC; \
-	$(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR) \
-		CROSS_COMPILE=$(TARGET_CROSS) \
-		$(if $(DTC),DTC="$(DTC)") \
-		PLAT=$(PLAT) \
-		BUILD_STRING="OpenWrt $(PKG_VERSION_PREFIX)$(PKG_VERSION)-$(PKG_RELEASE) ($(VARIANT))" \
-		$(TFA_MAKE_FLAGS)
-endef
-
 TFA_MAKE_FLAGS += \
 	MBEDTLS_DIR=$(PKG_BUILD_DIR)/$(MBEDTLS_NAME) \
 	BL33=$(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-u-boot.bin \

package/boot/arm-trusted-firmware-microchipsw/patches/0001-microchip-lan969x-add-Novarq-Tactical-1000-v3.patch

@@ -0,0 +1,171 @@
+From 190202583edb9dcab5ca49638169d08a332f0fdf Mon Sep 17 00:00:00 2001
+From: Robert Marko <robert.marko@sartura.hr>
+Date: Sun, 2 Nov 2025 16:57:45 +0100
+Subject: [PATCH] microchip: lan969x: add Novarq Tactical 1000 v3
+
+Add support for Novarq Tactical 1000 v3 board as a separate platform since
+it uses 2GB of RAM and requires a different RAM configuration.
+
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+---
+ .../fdts/lan969x-tactical-1000-v3-ddr.dtsi    | 90 +++++++++++++++++++
+ .../novarq_tactical_1000_v3_tb_fw_config.dts  | 30 +++++++
+ .../novarq_tactical_1000_v3/platform.mk       | 12 +++
+ scripts/fwu/fwu.js                            |  2 +-
+ 4 files changed, 133 insertions(+), 1 deletion(-)
+ create mode 100644 plat/microchip/lan969x/fdts/lan969x-tactical-1000-v3-ddr.dtsi
+ create mode 100644 plat/microchip/lan969x/novarq_tactical_1000_v3/fdts/novarq_tactical_1000_v3_tb_fw_config.dts
+ create mode 100644 plat/microchip/lan969x/novarq_tactical_1000_v3/platform.mk
+
+--- /dev/null
++++ b/plat/microchip/lan969x/fdts/lan969x-tactical-1000-v3-ddr.dtsi
+@@ -0,0 +1,90 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries.
++ *
++ */
++
++&ddr {
++	microchip,mem-name = "lan969x_tactical_1000_2gb 2025-11-02-13:03:23 7391dfb-dirty";
++	microchip,mem-speed = <2400>;
++	microchip,mem-size = <0x80000000>;
++	microchip,mem-bus-width = <16>;
++
++	microchip,main-reg = <
++		0x00001091	/* crcparctl1 */
++		0x00000001	/* dbictl */
++		0x00000040	/* dfimisc */
++		0x0391820f	/* dfitmg0 */
++		0x00040201	/* dfitmg1 */
++		0x40400003	/* dfiupd0 */
++		0x004000ff	/* dfiupd1 */
++		0x003f7f40	/* ecccfg0 */
++		0x00020248	/* init0 */
++		0x00e80000	/* init1 */
++		0x0c340101	/* init3 */
++		0x10180200	/* init4 */
++		0x00110000	/* init5 */
++		0x00000402	/* init6 */
++		0x00000c19	/* init7 */
++		0x81040010	/* mstr */
++		0x00000000	/* pccfg */
++		0x00000000	/* pwrctl */
++		0x00210020	/* rfshctl0 */
++		0x00000000	/* rfshctl3 */
++	>;
++
++	microchip,timing-reg = <
++		0x17131413	/* dramtmg0 */
++		0x0007051b	/* dramtmg1 */
++		0x1a000010	/* dramtmg12 */
++		0x090b0512	/* dramtmg2 */
++		0x0000400c	/* dramtmg3 */
++		0x08040409	/* dramtmg4 */
++		0x07070404	/* dramtmg5 */
++		0x07060c0b	/* dramtmg8 */
++		0x0003040d	/* dramtmg9 */
++		0x07000610	/* odtcfg */
++		0x0049014b	/* rfshtmg */
++	>;
++
++	microchip,mapping-reg = <
++		0x0000001f	/* addrmap0 */
++		0x003f0909	/* addrmap1 */
++		0x00000700	/* addrmap2 */
++		0x00000000	/* addrmap3 */
++		0x00001f1f	/* addrmap4 */
++		0x07070707	/* addrmap5 */
++		0x07070707	/* addrmap6 */
++		0x00000f07	/* addrmap7 */
++		0x00003f01	/* addrmap8 */
++	>;
++
++	microchip,phy-reg = <
++		0x0000040c	/* dcr */
++		0x0064401b	/* dsgcr */
++		0x8000b0cf	/* dtcr0 */
++		0x00010a37	/* dtcr1 */
++		0x00c01884	/* dxccr */
++		0x000010ba	/* pgcr2 */
++		0x00000000	/* schcr1 */
++		0x00079900	/* zq0pr */
++		0x10077900	/* zq1pr */
++		0x00000000	/* zq2pr */
++		0x00058f00	/* zqcr */
++	>;
++
++	microchip,phy_timing-reg = <
++		0x0827100a	/* dtpr0 */
++		0x28250018	/* dtpr1 */
++		0x000702a1	/* dtpr2 */
++		0x03000101	/* dtpr3 */
++		0x02950808	/* dtpr4 */
++		0x00361009	/* dtpr5 */
++		0x4ae25710	/* ptr0 */
++		0x74f4950e	/* ptr1 */
++		0x00083def	/* ptr2 */
++		0x2a192000	/* ptr3 */
++		0x1003a000	/* ptr4 */
++	>;
++
++};
+--- /dev/null
++++ b/plat/microchip/lan969x/novarq_tactical_1000_v3/fdts/novarq_tactical_1000_v3_tb_fw_config.dts
+@@ -0,0 +1,30 @@
++/*
++ * Copyright (c) 2022, Microchip Technology Inc. and its subsidiaries.
++ *
++ * SPDX-License-Identifier: BSD-3-Clause
++ */
++
++/dts-v1/;
++
++#include "lan969x.dtsi"
++#include "lan969x-tactical-1000-v3-ddr.dtsi"
++
++&emmc_clk {
++	clock-frequency = <100000000>;
++};
++
++&sdmmc0 {
++	status = "okay";
++	bus-width = <8>;
++};
++
++&qspi0 {
++	status = "okay";
++	spi-flash@0 {
++		compatible = "jedec,spi-nor";
++		reg = <0>;
++		spi-max-frequency = <100000000>;
++		spi-tx-bus-width = <4>;
++		spi-rx-bus-width = <4>;
++	};
++};
+--- /dev/null
++++ b/plat/microchip/lan969x/novarq_tactical_1000_v3/platform.mk
+@@ -0,0 +1,12 @@
++#
++# Copyright (c) 2021, Microchip Technology Inc. and its subsidiaries.
++#
++# SPDX-License-Identifier: BSD-3-Clause
++#
++
++include plat/microchip/lan969x/common/common.mk
++
++# This is used in lan969x code
++$(eval $(call add_define,LAN969X_ASIC))
++# This is used in common drivers
++$(eval $(call add_define,LAN966X_ASIC))
+--- a/scripts/fwu/fwu.js
++++ b/scripts/fwu/fwu.js
+@@ -91,7 +91,7 @@ const platforms = [
+ 	"ddr_diag":	ddr_diag_regs_lan969x,
+ 	"ddr_regs":	ddr_regs_lan969x,
+ 	"ddr_speed":	lan969x_speeds,
+-	"bl2u_compat":	["lan969x_a0", "lan969x_svb"],
++	"bl2u_compat":	["lan969x_a0", "lan969x_svb", "novarq_tactical_1000_v3"],
+     },
+ ];
+ 

package/boot/arm-trusted-firmware-microchipsw/patches/0002-cert_create-add-LibreSSL-3.9-compatibility.patch

@@ -0,0 +1,95 @@
+From 40166fd8d88f33c621d3cca0b936f31816f3fe2e Mon Sep 17 00:00:00 2001
+From: Robert Marko <robert.marko@sartura.hr>
+Date: Mon, 12 Jan 2026 14:40:23 +0100
+Subject: [PATCH] cert_create: add LibreSSL 3.9+ compatibility
+
+LibreSSL 3.9+ has dropped the whole support for X509V3 extensions.
+
+Generated by Gemini 3 Pro.
+
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+---
+ tools/cert_create/src/ext.c | 26 ++++++++++++++++++++++----
+ 1 file changed, 22 insertions(+), 4 deletions(-)
+
+--- a/tools/cert_create/src/ext.c
++++ b/tools/cert_create/src/ext.c
+@@ -51,15 +51,18 @@ int ext_init(void)
+ {
+ 	cmd_opt_t cmd_opt;
+ 	ext_t *ext;
++#if !defined(LIBRESSL_VERSION_NUMBER) || LIBRESSL_VERSION_NUMBER < 0x40200000L
+ 	X509V3_EXT_METHOD *m;
+-	int nid, ret;
++	int ret, nid;
++#endif
+ 	unsigned int i;
+ 
+ 	extensions = malloc((num_def_extensions * sizeof(def_extensions[0]))
+ #ifdef PDEF_EXTS
+ 			    + (num_pdef_extensions * sizeof(pdef_extensions[0]))
+ #endif
+-			    );
++		);
++
+ 	if (extensions == NULL) {
+ 		ERROR("%s:%d Failed to allocate memory.\n", __func__, __LINE__);
+ 		return 1;
+@@ -69,7 +72,7 @@ int ext_init(void)
+ 	       (num_def_extensions * sizeof(def_extensions[0])));
+ #ifdef PDEF_EXTS
+ 	memcpy(&extensions[num_def_extensions], &pdef_extensions[0],
+-		(num_pdef_extensions * sizeof(pdef_extensions[0])));
++	       (num_pdef_extensions * sizeof(pdef_extensions[0])));
+ 	num_extensions = num_def_extensions + num_pdef_extensions;
+ #else
+ 	num_extensions = num_def_extensions;
+@@ -86,11 +89,15 @@ int ext_init(void)
+ 			cmd_opt.help_msg = ext->help_msg;
+ 			cmd_opt_add(&cmd_opt);
+ 		}
++
+ 		/* Register the extension OID in OpenSSL */
+ 		if (ext->oid == NULL) {
+ 			continue;
+ 		}
++
++#if !defined(LIBRESSL_VERSION_NUMBER) || LIBRESSL_VERSION_NUMBER < 0x40200000L
+ 		nid = OBJ_create(ext->oid, ext->sn, ext->ln);
++
+ 		if (ext->alias) {
+ 			X509V3_EXT_add_alias(nid, ext->alias);
+ 		} else {
+@@ -117,7 +124,16 @@ int ext_init(void)
+ 				return 1;
+ 			}
+ 		}
++#else
++		/*
++		 * LibreSSL 4.2.0+ removed X509V3_EXT_add/alias.
++		 * We still register the OID, but ignore the returned NID
++		 * as we skip method registration.
++		 */
++		OBJ_create(ext->oid, ext->sn, ext->ln);
++#endif
+ 	}
++
+ 	return 0;
+ }
+ 
+@@ -323,12 +339,14 @@ void ext_cleanup(void)
+ 	for (i = 0; i < num_extensions; i++) {
+ 		if (extensions[i].arg != NULL) {
+ 			void *ptr = (void *)extensions[i].arg;
+-
+ 			extensions[i].arg = NULL;
+ 			free(ptr);
+ 		}
+ 	}
+ 	free(extensions);
++
++#if !defined(LIBRESSL_VERSION_NUMBER) || LIBRESSL_VERSION_NUMBER < 0x40200000L
+ 	X509V3_EXT_cleanup();
++#endif
+ }
+ 

package/boot/arm-trusted-firmware-microchipsw/patches/0003-cert_create-pass-pthread-in-LDFLAGS.patch

@@ -0,0 +1,36 @@
+From 11ff8b5e67830d5a09f39e8c1f000b0ddcf8e88f Mon Sep 17 00:00:00 2001
+From: Robert Marko <robert.marko@sartura.hr>
+Date: Mon, 12 Jan 2026 15:16:07 +0100
+Subject: [PATCH] cert_create: pass pthread in LDFLAGS
+
+OpenWrt-s LibreSSL is linked against pthread, so we have to make sure to
+pass -lpthread in LDFLAGS to avoid:
+/usr/bin/ld: /openwrt/staging_dir/host/lib/libcrypto.a(libcrypto_la-crypto_init.o): in function `OPENSSL_init_crypto':
+crypto_init.c:(.text+0x67): undefined reference to `pthread_once'
+/usr/bin/ld: /openwrt/staging_dir/host/lib/libcrypto.a(libcrypto_la-err.o): in function `ERR_load_ERR_strings':
+err.c:(.text+0x812): undefined reference to `pthread_once'
+/usr/bin/ld: /openwrt/staging_dir/host/lib/libcrypto.a(libcrypto_la-conf_sap.o): in function `OpenSSL_config':
+conf_sap.c:(.text+0xc0): undefined reference to `pthread_once'
+/usr/bin/ld: /openwrt/staging_dir/host/lib/libcrypto.a(libcrypto_la-conf_sap.o): in function `OpenSSL_no_config':
+conf_sap.c:(.text+0x107): undefined reference to `pthread_once'
+/usr/bin/ld: /openwrt/staging_dir/host/lib/libcrypto.a(libcrypto_la-err_all.o): in function `ERR_load_crypto_strings':
+err_all.c:(.text+0xa3): undefined reference to `pthread_once'
+collect2: error: ld returned 1 exit status
+make[4]: *** [Makefile:93: cert_create] Error 1
+
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+---
+ tools/cert_create/Makefile | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/tools/cert_create/Makefile
++++ b/tools/cert_create/Makefile
+@@ -79,7 +79,7 @@ INC_DIR += -I ./include -I ${PLAT_INCLUD
+ # located under the main project directory (i.e.: ${OPENSSL_DIR}, not
+ # ${OPENSSL_DIR}/lib/).
+ LIB_DIR := -L ${OPENSSL_DIR}/lib -L ${OPENSSL_DIR}
+-LIB := -lssl -lcrypto
++LIB := -lssl -lcrypto -pthread
+ 
+ HOSTCC ?= gcc
+ 

package/boot/arm-trusted-firmware-microchipsw/patches/0004-microchip-lan969x-do-not-rely-on-Ruby-shebang.patch

@@ -0,0 +1,29 @@
+From f78f934710394822a36bd74043ed93a812c1c690 Mon Sep 17 00:00:00 2001
+From: Robert Marko <robert.marko@sartura.hr>
+Date: Mon, 12 Jan 2026 15:36:35 +0100
+Subject: [PATCH] microchip: lan969x: do not rely on Ruby shebang
+
+Host Ruby build in the staging dir must be used, so we cannot rely on the
+shebang as that will fail.
+
+So, call the script via Ruby executable instead.
+
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+---
+ plat/microchip/lan969x/common/common.mk | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/plat/microchip/lan969x/common/common.mk
++++ b/plat/microchip/lan969x/common/common.mk
+@@ -218,9 +218,9 @@ FWU_HTML := ${BUILD_PLAT}/fwu.html
+ FWU_JS   := ${BUILD_PLAT}/fwu_app.js
+ 
+ ${FWU_JS}: ${BUILD_PLAT}/${FWU_FIP_NAME}
+-	./plat/microchip/scripts/mkjs.rb -p ${PLAT} -o ${FWU_JS} $<
++	$(Q)ruby ./plat/microchip/scripts/mkjs.rb -p ${PLAT} -o ${FWU_JS} $<
+ 
+ ${FWU_HTML}: ${FWU_JS}
+-	./plat/microchip/scripts/html_inline.rb -i ${BUILD_PLAT} ./scripts/fwu/serial.html > ${FWU_HTML}
++	$(Q)ruby ./plat/microchip/scripts/html_inline.rb -i ${BUILD_PLAT} ./scripts/fwu/serial.html > ${FWU_HTML}
+ 
+ all: ${FWU_HTML}

package/boot/uboot-mediatek/Makefile

@@ -231,6 +231,18 @@ define U-Boot/mt7981_abt_asr3000
   DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
 endef
 
+define U-Boot/mt7981_bazis-ax3000wm
+  NAME:=BAZIS AX3000WM
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=bazis_ax3000wm
+  UBOOT_CONFIG:=mt7981_bazis_ax3000wm
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
+endef
+
 define U-Boot/mt7981_cmcc_a10
   NAME:=CMCC A10
   BUILD_SUBTARGET:=filogic
@@ -309,9 +321,20 @@ define U-Boot/mt7981_cudy_tr3000-v1
   BUILD_DEVICES:=cudy_tr3000-v1-ubootmod
   UBOOT_CONFIG:=mt7981_cudy_tr3000-v1
   UBOOT_IMAGE:=u-boot.fip
-  BL2_BOOTDEV:=cudy-tr3000-v1
+  BL2_BOOTDEV:=cudy-ddr3
   BL2_SOC:=mt7981
-  DEPENDS:=+trusted-firmware-a-mt7981-cudy-tr3000-v1
+  DEPENDS:=+trusted-firmware-a-mt7981-cudy-ddr3
+endef
+
+define U-Boot/mt7981_cudy_wbr3000uax-v1
+  NAME:=Cudy WBR3000UAX v1
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=cudy_wbr3000uax-v1-ubootmod
+  UBOOT_CONFIG:=mt7981_cudy_wbr3000uax-v1
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=cudy-ddr3
+  BL2_SOC:=mt7981
+  DEPENDS:=+trusted-firmware-a-mt7981-cudy-ddr3
 endef
 
 define U-Boot/mt7981_glinet_gl-mt2500
@@ -422,6 +445,18 @@ define U-Boot/mt7981_netis_nx31
   DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
 endef
 
+define U-Boot/mt7981_netis_nx32u
+  NAME:=netis NX32U
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=netis_nx32u
+  UBOOT_CONFIG:=mt7981_netis_nx32u
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
+endef
+
 define U-Boot/mt7981_nokia_ea0326gmp
   NAME:=Nokia EA0326GMP
   BUILD_SUBTARGET:=filogic
@@ -870,6 +905,17 @@ define U-Boot/mt7987_bananapi_bpi-r4-lite-nor
   FIP_COMPRESS:=1
 endef
 
+define U-Boot/mt7987_routerich_be7200
+  NAME:=Routerich BE7200
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=routerich_be7200
+  UBOOT_CONFIG:=mt7987a_routerich_be7200
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand0
+  BL2_SOC:=mt7987
+  DEPENDS:=+trusted-firmware-a-mt7987-spim-nand0
+endef
+
 define U-Boot/mt7988_arcadyan_mozart
   NAME:=Arcadyan Mozart
   BUILD_SUBTARGET:=filogic
@@ -1084,6 +1130,7 @@ UBOOT_TARGETS := \
 	mt7628_ravpower_rp-wd009 \
 	mt7629_rfb \
 	mt7981_abt_asr3000 \
+	mt7981_bazis-ax3000wm \
 	mt7981_cmcc_a10 \
 	mt7981_cmcc_rax3000m-emmc-ddr3 \
 	mt7981_cmcc_rax3000m-emmc-ddr4 \
@@ -1091,6 +1138,7 @@ UBOOT_TARGETS := \
 	mt7981_cmcc_rax3000m-nand-ddr4 \
 	mt7981_comfast_cf-wr632ax \
 	mt7981_cudy_tr3000-v1 \
+	mt7981_cudy_wbr3000uax-v1 \
 	mt7981_gatonetworks_gdsp \
 	mt7981_glinet_gl-mt2500 \
 	mt7981_glinet_gl-x3000 \
@@ -1101,6 +1149,7 @@ UBOOT_TARGETS := \
 	mt7981_konka_komi-a31 \
 	mt7981_netis_nx30v2 \
 	mt7981_netis_nx31 \
+	mt7981_netis_nx32u \
 	mt7981_nokia_ea0326gmp \
 	mt7981_openwrt_one-snand \
 	mt7981_openwrt_one-nor \
@@ -1140,6 +1189,7 @@ UBOOT_TARGETS := \
 	mt7987_rfb-emmc \
 	mt7987_rfb-sd \
 	mt7987_rfb-spim-nand \
+	mt7987_routerich_be7200 \
 	mt7988_arcadyan_mozart \
 	mt7988_asus_zenwifi-bt8 \
 	mt7988_bananapi_bpi-r4-emmc \

package/boot/uboot-mediatek/patches/445-add-netis-nx32u.patch

@@ -0,0 +1,341 @@
+--- /dev/null
++++ b/configs/mt7981_netis_nx32u_defconfig
+@@ -0,0 +1,108 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7981-netis_nx32u"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_TARGET_MT7981=y
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_DEBUG_UART=y
++CONFIG_FIT=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981-netis_nx32u.dtb"
++CONFIG_LOGLEVEL=7
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_LOG=y
++# CONFIG_BOARD_INIT is not set
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_PROMPT="MT7981> "
++CONFIG_CMD_CPU=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_UUID=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_ENV_REDUNDANT=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_ENV_RELOC_GD_ENV_ADDR=y
++CONFIG_ENV_USE_DEFAULT_ENV_TEXT_FILE=y
++CONFIG_ENV_DEFAULT_ENV_TEXT_FILE="defenvs/netis_nx32u_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NETCONSOLE=y
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_CLK=y
++CONFIG_GPIO_HOG=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++# CONFIG_MMC is not set
++CONFIG_MTD=y
++CONFIG_DM_MTD=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTD_UBI_FASTMAP=y
++CONFIG_PHY_FIXED=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PHY=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_SERIAL_RX_BUFFER=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPIM=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
+--- /dev/null
++++ b/arch/arm/dts/mt7981-netis_nx32u.dts
+@@ -0,0 +1,167 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (c) 2026
++ * Author: Fil Dunsky <filipp.dunsky@gmail.com>
++ */
++
++/dts-v1/;
++#include "mt7981.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "netis NX32U";
++	compatible = "netis,nx32u", "mediatek,mt7981";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x10000000>;
++	};
++
++	keys {
++		compatible = "gpio-keys";
++
++		button-reset {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
++		};
++
++		button-mesh {
++			label = "mesh";
++			linux,code = <BTN_0>;
++			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	gpio-leds {
++		compatible = "gpio-leds";
++
++		led_internet {
++			label = "green:internet";
++			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
++		};
++
++		led_wps {
++			label = "green:wps";
++			gpios = <&pio 5 GPIO_ACTIVE_LOW>;
++		};
++
++		led_wifi2g {
++			label = "green:wifi2g";
++			gpios = <&pio 34 GPIO_ACTIVE_LOW>;
++		};
++
++		led_wifi5g {
++			label = "green:wifi5g";
++			gpios = <&pio 35 GPIO_ACTIVE_LOW>;
++		};
++
++		led_usb {
++			label = "green:usb";
++			gpios = <&pio 13 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&pio {
++	spi_flash_pins: spi0-pins-func-1 {
++		mux {
++			function = "flash";
++			groups = "spi0", "spi0_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
++		};
++
++		conf-pd {
++			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
++		};
++	};
++};
++
++&spi0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <2>;
++	sample_sel = <0>;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "BL2";
++				reg = <0x0 0x100000>;
++			};
++
++			partition@100000 {
++				label = "u-boot-env";
++				reg = <0x100000 0x80000>;
++			};
++
++			partition@160000 {
++				label = "Factory";
++				reg = <0x180000 0x200000>;
++			};
++
++			partition@380000 {
++				label = "FIP";
++				reg = <0x380000 0x200000>;
++			};
++
++			partition@580000 {
++				label = "ubi";
++				reg = <0x580000 0x7a80000>;
++			};
++		};
++	};
++};
++
++&watchdog {
++	status = "disabled";
++};
+--- /dev/null
++++ b/defenvs/netis_nx32u_env
+@@ -0,0 +1,57 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootcmd=run check_buttons ; if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-netis_nx32u-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-netis_nx32u-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-netis_nx32u-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-netis_nx32u-squashfs-sysupgrade.itb
++bootled_status=green:wps
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_status on ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_status on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led bootled_status off
++boot_recovery=led $bootled_status on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led bootled_status off
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=led $bootled_status on ; while true ; do run boot_tftp ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++check_buttons=if button reset ; then run boot_tftp ; fi
++ethaddr_factory=mtd read Factory 0x40080000 0x1e0000 0x20000 && env readmem -b ethaddr 0x4009ef20 0x6 ; setenv ethaddr_factory
++part_default=production
++part_recovery=recovery
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase FIP && mtd write FIP $loadaddr
++mtd_write_bl2=mtd erase BL2 && mtd write BL2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic || run ubi_format
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-mediatek/patches/448-add-comfast_cf-wr632ax.patch

@@ -283,7 +283,7 @@
 +bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
 +bootmenu_default=0
 +bootmenu_delay=0
-+bootmenu_title=      [0;34m( ( ( [1;39mOpenWrt[0;34m ) ) )
++bootmenu_title=      ( ( ( OpenWrt ) ) )
 +bootmenu_0=Initialize environment.=run _firstboot
 +bootmenu_0d=Run default boot command.=run boot_default
 +bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
@@ -291,8 +291,8 @@
 +bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
 +bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
 +bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
-+bootmenu_6=[31mLoad BL31+U-Boot FIP via TFTP then write to NAND.[0m=run boot_tftp_write_fip ; run bootmenu_confirm_return
-+bootmenu_7=[31mLoad BL2 preloader via TFTP then write to NAND.[0m=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
 +bootmenu_8=Reboot.=reset
 +bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
 +boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
@@ -320,4 +320,4 @@
 +_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
 +_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
 +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
-+_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       [33m$ver[0m"
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-mediatek/patches/449-add-cudy_wbr3000uax-v1.patch

@@ -0,0 +1,355 @@
+--- /dev/null
++++ b/configs/mt7981_cudy_wbr3000uax-v1_defconfig
+@@ -0,0 +1,108 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7981-cudy-wbr3000uax-v1"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_TARGET_MT7981=y
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_DEBUG_UART=y
++CONFIG_FIT=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981-cudy-wbr3000uax-v1.dtb"
++CONFIG_LOGLEVEL=7
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_LOG=y
++# CONFIG_BOARD_INIT is not set
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_PROMPT="MT7981> "
++CONFIG_CMD_CPU=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_UUID=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_ENV_REDUNDANT=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_ENV_RELOC_GD_ENV_ADDR=y
++CONFIG_ENV_USE_DEFAULT_ENV_TEXT_FILE=y
++CONFIG_ENV_DEFAULT_ENV_TEXT_FILE="defenvs/cudy_wbr3000uax-v1_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NETCONSOLE=y
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_CLK=y
++CONFIG_GPIO_HOG=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++# CONFIG_MMC is not set
++CONFIG_MTD=y
++CONFIG_DM_MTD=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTD_UBI_FASTMAP=y
++CONFIG_PHY_FIXED=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PHY=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_SERIAL_RX_BUFFER=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPIM=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
+--- /dev/null
++++ b/arch/arm/dts/mt7981-cudy-wbr3000uax-v1.dts
+@@ -0,0 +1,184 @@
++// SPDX-License-Identifier: GPL-2.0-or-later
++
++/dts-v1/;
++#include "mt7981.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "Cudy WBR3000UAX v1";
++	compatible = "mediatek,mt7981", "mediatek,mt7981-rfb";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x20000000>;
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++
++		button-reset {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
++		};
++
++		button-wps {
++			label = "wps";
++			linux,code = <KEY_WPS_BUTTON>;
++			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	gpio-leds {
++		compatible = "gpio-leds";
++
++		led_status: led_power {
++			label = "blue:power";
++			gpios = <&pio 8 GPIO_ACTIVE_LOW>;
++		};
++
++		led_wan_blue {
++			label = "blue:wan";
++			gpios = <&pio 10 GPIO_ACTIVE_LOW>;
++		};
++		
++		led_wan_red {
++			label = "red:wan";
++			gpios = <&pio 4 GPIO_ACTIVE_LOW>;
++		};
++
++		led_lan {
++			label = "blue:lan";
++			gpios = <&pio 11 GPIO_ACTIVE_LOW>;
++		};
++
++		led_wps_blue {
++			label = "blue:wps";
++			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
++		};
++
++		led_wps_red {
++			label = "red:wps";
++			gpios = <&pio 5 GPIO_ACTIVE_LOW>;
++		};
++
++		led_wifi2g {
++			label = "blue:wifi2g";
++			gpios = <&pio 6 GPIO_ACTIVE_LOW>;
++		};
++
++		led_wifi5g {
++			label = "blue:wifi5g";
++			gpios = <&pio 7 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&pio {
++	spi_flash_pins: spi0-pins-func-1 {
++		mux {
++			function = "flash";
++			groups = "spi0", "spi0_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
++		};
++
++		conf-pd {
++			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
++		};
++	};
++};
++
++&spi0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <2>;
++	sample_sel = <0>;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "bl2";
++				reg = <0x0 0x100000>;
++			};
++
++			partition@100000 {
++				label = "u-boot-env";
++				reg = <0x100000 0x80000>;
++			};
++
++			partition@180000 {
++				label = "factory";
++				reg = <0x180000 0x200000>;
++			};
++
++			partition@380000 {
++				label = "bdinfo";
++				reg = <0x380000 0x40000>;
++			};
++
++			partition@3c0000 {
++				label = "fip";
++				reg = <0x3c0000 0x200000>;
++			};
++
++			partition@5c0000 {
++				label = "ubi";
++				reg = <0x5c0000 0x7a40000>;
++				compatible = "linux,ubi";
++			};
++		};
++	};
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&watchdog {
++	status = "disabled";
++};
+--- /dev/null
++++ b/defenvs/cudy_wbr3000uax-v1_env
+@@ -0,0 +1,54 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-cudy_wbr3000uax-v1-ubootmod-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-cudy_wbr3000uax-v1-ubootmod-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-cudy_wbr3000uax-v1-ubootmod-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-cudy_wbr3000uax-v1-ubootmod-squashfs-sysupgrade.itb
++bootled_pwr=blue:power
++bootled_rec=red:wan
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic || run ubi_format
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-mediatek/patches/467-add-routerich-be7200.patch

@@ -0,0 +1,373 @@
+--- /dev/null
++++ b/configs/mt7987a_routerich_be7200_defconfig
+@@ -0,0 +1,133 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7987a-routerich_be7200"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_TARGET_MT7987=y
++CONFIG_CPU_ARMV8=y
++CONFIG_SYS_BOOTM_LEN=0x6000000
++CONFIG_SYS_LOAD_ADDR=0x48000000
++CONFIG_PRE_CON_BUF_ADDR=0x4007ef00
++CONFIG_DEBUG_UART_BASE=0x11000000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_DEBUG_UART=y
++CONFIG_FIT=y
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_DEFAULT_FDT_FILE="mt7987a-routerich_be7200"
++CONFIG_SYS_CBSIZE=512
++CONFIG_SYS_PBSIZE=1049
++CONFIG_LOGLEVEL=7
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_LOG=y
++# CONFIG_BOARD_INIT is not set
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_PROMPT="MT7987> "
++# CONFIG_BOOTM_NETBSD is not set
++# CONFIG_BOOTM_PLAN9 is not set
++# CONFIG_BOOTM_RTEMS is not set
++# CONFIG_BOOTM_VXWORKS is not set
++# CONFIG_CMD_BOOTEFI_BOOTMGR is not set
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_I2C=y
++CONFIG_CMD_MMC=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_PCI=y
++CONFIG_CMD_USB=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_UUID=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_EXT4=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++# CONFIG_CMD_XIMG is not set
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_ENV_REDUNDANT=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_ENV_USE_DEFAULT_ENV_TEXT_FILE=y
++CONFIG_ENV_DEFAULT_ENV_TEXT_FILE="defenvs/routerich_be7200_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NETCONSOLE=y
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_NETMASK=y
++CONFIG_NETMASK="255.255.255.0"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_CLK=y
++CONFIG_DM_I2C=y
++CONFIG_SYS_I2C_MTK=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++# CONFIG_MMC is not set
++CONFIG_MTD=y
++CONFIG_DM_MTD=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTD_UBI_FASTMAP=y
++CONFIG_PHY_ETHERNET_ID=y
++CONFIG_PHY_FIXED=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7987=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_MTK=y
++CONFIG_SCSI=y
++CONFIG_DM_SERIAL=y
++CONFIG_SERIAL_RX_BUFFER=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPIM=y
++CONFIG_USB=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_XHCI_MTK=y
++CONFIG_USB_STORAGE=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
+--- /dev/null
++++ b/defenvs/routerich_be7200_env
+@@ -0,0 +1,57 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x48000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootcmd=run check_buttons ; if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-routerich_be7200-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-routerich_be7200-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-routerich_be7200-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-routerich_be7200-squashfs-sysupgrade.itb
++bootled_status=blue:status
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_status on ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_status on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led bootled_status off
++boot_recovery=led $bootled_status on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led bootled_status off
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=led $bootled_status on ; while true ; do run boot_tftp ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++check_buttons=if button reset ; then run boot_tftp ; fi
++ethaddr_factory=mtd read Factory 0x40080000 0x0 0x20000 && env readmem -b ethaddr 0x40080004 0x6 ; setenv ethaddr_factory
++part_default=production
++part_recovery=recovery
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase FIP && mtd write FIP $loadaddr
++mtd_write_bl2=mtd erase BL2 && mtd write BL2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic || run ubi_format
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"
+--- /dev/null
++++ b/arch/arm/dts/mt7987a-routerich_be7200.dts
+@@ -0,0 +1,77 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (c) 2025
++ * Author: Mikhail Zhilkin <csharper2005@gmail.com>
++ */
++
++/dts-v1/;
++#include "mt7987a.dtsi"
++#include <dt-bindings/input/input.h>
++
++/ {
++	model = "Routerich BE7200";
++	compatible = "routerich,be7200",
++		     "mediatek,mt7987";
++
++	gpio-keys {
++		compatible = "gpio-keys";
++
++		button-0 {
++			label = "mesh";
++			linux,code = <KEY_WPS_BUTTON>;
++			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
++			debounce-interval = <10>;
++		};
++
++		button-1 {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
++			debounce-interval = <10>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		led-0 {
++			label = "blue:status";
++			gpios = <&pio 4 GPIO_ACTIVE_LOW>;
++		};
++
++		led-1 {
++			label = "blue:wlan5g";
++			gpios = <&pio 5 GPIO_ACTIVE_LOW>;
++		};
++
++		led-2 {
++			label = "blue:mesh";
++			gpios = <&pio 7 GPIO_ACTIVE_LOW>;
++		};
++
++		led-3 {
++			label = "red:wan";
++			gpios = <&pio 8 GPIO_ACTIVE_LOW>;
++		};
++
++		led-4 {
++			label = "blue:wan";
++			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
++		};
++
++		led-5 {
++			label = "blue:lan3";
++			gpios = <&pio 10 GPIO_ACTIVE_LOW>;
++		};
++
++		led-6 {
++			label = "blue:lan2";
++			gpios = <&pio 11 GPIO_ACTIVE_LOW>;
++		};
++
++		led-7 {
++			label = "blue:lan1";
++			gpios = <&pio 12 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
+--- a/arch/arm/dts/Makefile
++++ b/arch/arm/dts/Makefile
+@@ -1138,6 +1138,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
+ 	mt7986b-emmc-rfb.dtb \
+ 	mt7987a-emmc-rfb.dtb \
+ 	mt7987a-rfb.dtb \
++	mt7987a-routerich_be7200.dtb \
+ 	mt7987a-sd-rfb.dtb \
+ 	mt7988-rfb.dtb \
+ 	mt7988-sd-rfb.dtb \
+--- /dev/null
++++ b/arch/arm/dts/mt7987a-routerich_be7200-u-boot.dtsi
+@@ -0,0 +1,84 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (c) 2025
++ * Author: Mikhail Zhilkin <csharper2005@gmail.com>
++ */
++
++#include "mt7987a-u-boot.dtsi"
++#include "mt7987-netsys-u-boot.dtsi"
++
++/ {
++	model = "Routerich BE7200";
++	compatible = "routerich,be7200",
++		     "mediatek,mt7987";
++};
++
++&eth0 {
++	status = "okay";
++	pinctrl-names = "default";
++	pinctrl-0 = <&mdio0_pins>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "auto";
++	reset-gpios = <&pio 42 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++		pause;
++	};
++};
++
++&spi0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi0_flash_pins>;
++	#address-cells = <1>;
++	#size-cells = <0>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <2>;
++	sample_sel = <0>;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++		spi-max-frequency = <52000000>;
++		spi-rx-bus-width = <4>;
++		spi-tx-bus-width = <4>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "BL2";
++				reg = <0x0 0x100000>;
++			};
++
++			partition@100000 {
++				label = "u-boot-env (unused)";
++				reg = <0x100000 0x80000>;
++			};
++
++			partition@180000 {
++				label = "Factory";
++				reg = <0x180000 0x400000>;
++			};
++
++			partition@580000 {
++				label = "FIP";
++				reg = <0x580000 0x200000>;
++			};
++
++			partition@780000 {
++				label = "ubi";
++				reg = <0x780000 0x1f880000>;
++				compatible = "linux,ubi";
++			};
++		};
++	};
++};

package/boot/uboot-mediatek/patches/502-add-bazis-ax3000wm.patch

@@ -0,0 +1,329 @@
+--- /dev/null
++++ b/configs/mt7981_bazis_ax3000wm_defconfig
+@@ -0,0 +1,107 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7981-bazis-ax3000wm"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_TARGET_MT7981=y
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_PRE_CON_BUF_ADDR=0x4007ef00
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_DEBUG_UART=y
++CONFIG_FIT=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981-bazis-ax3000wm.dtb"
++CONFIG_LOGLEVEL=7
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_LOG=y
++# CONFIG_BOARD_INIT is not set
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_PROMPT="MT7981> "
++CONFIG_CMD_CPU=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_UUID=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_ENV_REDUNDANT=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_ENV_RELOC_GD_ENV_ADDR=y
++CONFIG_ENV_USE_DEFAULT_ENV_TEXT_FILE=y
++CONFIG_ENV_DEFAULT_ENV_TEXT_FILE="defenvs/bazis_ax3000wm_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NETCONSOLE=y
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_CLK=y
++CONFIG_GPIO_HOG=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++# CONFIG_MMC is not set
++CONFIG_MTD=y
++CONFIG_DM_MTD=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTD_UBI_FASTMAP=y
++CONFIG_PHY_FIXED=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_SERIAL_RX_BUFFER=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPIM=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
+--- /dev/null
++++ b/arch/arm/dts/mt7981-bazis-ax3000wm.dts
+@@ -0,0 +1,159 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (c) 2026
++ * Author: Fil Dunsky <filipp.dunsky@gmail.com>
++ */
++
++/dts-v1/;
++#include "mt7981.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "Bazis AX3000WM";
++	compatible = "bazis,ax3000wm", "mediatek,mt7981";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x10000000>;
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++
++		reset {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
++		};
++
++		mesh {
++			label = "mesh";
++			linux,code = <KEY_RFKILL>;
++			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		led_status: led_power {
++			label = "blue:power";
++			gpios = <&pio 13 GPIO_ACTIVE_LOW>;
++		};
++		
++		led_warning: led_fault {
++			label = "red:fault";
++			gpios = <&pio 34 GPIO_ACTIVE_LOW>;
++		};
++
++		led_status_green: led-2 {
++			label = "green:status";
++			gpios = <&pio 35 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <1>;
++	phy-mode = "gmii";
++	phy-handle = <&phy0>;
++
++	mdio {
++		phy0: ethernet-phy@0 {
++			compatible = "ethernet-phy-id03a2.9461";
++			reg = <0x0>;
++			phy-mode = "gmii";
++		};
++	};
++};
++
++&pio {
++	spi_flash_pins: spi0-pins-func-1 {
++		mux {
++			function = "flash";
++			groups = "spi0", "spi0_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
++			drive-strength = <MTK_DRIVE_4mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
++		};
++
++		conf-pd {
++			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
++			drive-strength = <MTK_DRIVE_4mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
++		};
++	};
++};
++
++&spi0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <2>;
++	sample_sel = <0>;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "BL2";
++				reg = <0x0 0x100000>;
++			};
++
++			partition@100000 {
++				label = "u-boot-env";
++				reg = <0x100000 0x80000>;
++			};
++
++			partition@180000 {
++				label = "Factory";
++				reg = <0x180000 0x200000>;
++			};
++
++			partition@380000 {
++				label = "FIP";
++				reg = <0x380000 0x200000>;
++			};
++
++			partition@580000 {
++				label = "ubi";
++				reg = <0x580000 0x7a40000>;
++			};
++		};
++	};
++};
++
++&watchdog {
++	status = "disabled";
++};
+--- /dev/null
++++ b/defenvs/bazis_ax3000wm_env
+@@ -0,0 +1,54 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-bazis_ax3000wm-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-bazis_ax3000wm-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-bazis_ax3000wm-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-bazis_ax3000wm-squashfs-sysupgrade.itb
++bootled_pwr=blue:power
++bootled_rec=red:fault
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic || run ubi_format
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-microchipsw/Makefile

@@ -27,7 +27,16 @@ define U-Boot/ev23x71a
   UBOOT_CONFIG:=mchp_lan969x
 endef
 
-UBOOT_TARGETS:= ev23x71a
+define U-Boot/tactical-1000
+  NAME:=Novarq Tactical 1000
+  BUILD_DEVICES:=novarq_tactical-1000
+  BUILD_SUBTARGET:=lan969x
+  UBOOT_CONFIG:=mchp_lan969x
+endef
+
+UBOOT_TARGETS:= \
+	ev23x71a \
+	tactical-1000
 
 define Build/InstallDev
 	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)

package/boot/uboot-microchipsw/src/board/microchip/lan969x/lan969x.env

@@ -8,3 +8,5 @@ bootargs=console=ttyAT0,115200 root=PARTLABEL=rootfs rootwait
 mmc_read_kernel=mmc read $loadaddr $part_addr 0x100 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr $part_addr $image_size
 boot_system=part start mmc 0 kernel part_addr && part size mmc 0 kernel part_size && run mmc_read_kernel && bootm
 bootcmd=run boot_system
+filesize_to_blk=setexpr cnt $filesize + 0x1ff && setexpr cnt $cnt / 0x200
+mmc_write_fip=part start mmc 0 fip part_addr && part size mmc 0 fip part_size && run filesize_to_blk && test 0x$cnt -le 0x$part_size && mmc erase fip && mmc write $loadaddr $part_addr $cnt

package/boot/uboot-mvebu/Makefile

@@ -75,12 +75,20 @@ define U-Boot/rb5009
   UBOOT_IMAGE:=u-boot.elf
 endef
 
+define U-Boot/atlas
+  NAME:=RIPE Atlas Probe v5
+  BUILD_DEVICES:=ripe_atlas-v5
+  BUILD_SUBTARGET:=cortexa53
+  UBOOT_CONFIG:=turris_mox
+endef
+
 UBOOT_TARGETS:= \
 	mox \
 	clearfog \
 	helios4 \
 	omnia \
 	espressobin \
+	atlas \
 	uDPU \
 	eDPU \
 	rb5009

package/boot/uboot-qoriq/Makefile

@@ -0,0 +1,80 @@
+#
+# Copyright (C) 2016 Jiang Yutang <jiangyutang1978@gmail.com>
+# Copyright (C) 2025 Pawel Dembicki <paweldembicki@gmail.com>
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_VERSION:=2025.01
+PKG_HASH:=cdef7d507c93f1bbd9f015ea9bc21fa074268481405501945abc6f854d5b686f
+PKG_RELEASE:=1
+
+include $(INCLUDE_DIR)/u-boot.mk
+include $(INCLUDE_DIR)/package.mk
+
+TOOLCHAIN_NAME:=openwrt-toolchain-24.10.4-mpc85xx-p2020_gcc-13.3.0_musl.Linux-x86_64
+TOOLCHAIN_FILE:=$(TOOLCHAIN_NAME).tar.zst
+TOOLCHAIN_PATH:=$(PKG_BUILD_DIR)/$(TOOLCHAIN_NAME)/toolchain-powerpc_8548_gcc-13.3.0_musl/bin
+TOOLCHAIN_CROSS_COMPILE:=powerpc-openwrt-linux-musl-
+
+define Download/uboot-qoriq-toolchain
+  FILE:=$(TOOLCHAIN_FILE)
+  URL:=https://downloads.openwrt.org/releases/24.10.4/targets/mpc85xx/p2020/
+  URL_FILE:=$(TOOLCHAIN_FILE)
+  HASH:=c16566bb3625b6c45e4184b9d37953d4c3c1dcdec1141a45df834da626d4c08d
+endef
+
+define U-Boot/Default
+  BUILD_TARGET:=qoriq
+  BUILD_SUBTARGET:=generic
+  BUILD_DEVICES:=$(1)
+  ENV_SIZE:=0x2000
+endef
+
+define U-Boot/fsl_T4240RDB-nor
+  NAME:=NXP T4240RDB NOR Boot
+  BUILD_DEVICES:=fsl_T4240RDB
+  UBOOT_CONFIG:=T4240RDB
+  UBOOT_IMAGE:=u-boot-dtb.bin
+endef
+
+define U-Boot/fsl_T4240RDB-sdboot
+  NAME:=NXP T4240RDB SD Card Boot
+  BUILD_DEVICES:=fsl_T4240RDB
+  UBOOT_CONFIG:=T4240RDB_SDCARD
+  UBOOT_IMAGE:=u-boot-with-spl-pbl.bin
+endef
+
+UBOOT_TARGETS := \
+  fsl_T4240RDB-nor \
+  fsl_T4240RDB-sdboot
+
+define Build/Prepare
+		$(Build/Prepare/Default)
+	$(TAR) -I $(STAGING_DIR_HOST)/bin/zstd -xf $(DL_DIR)/$(TOOLCHAIN_FILE) -C $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile/U-Boot
+	+$(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR) \
+		CROSS_COMPILE=$(TOOLCHAIN_PATH)/$(TOOLCHAIN_CROSS_COMPILE) \
+		$(if $(DTC),DTC="$(DTC)") \
+		$(UBOOT_MAKE_FLAGS)
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(UBOOT_IMAGE) \
+		$(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-uboot.bin
+	$(PKG_BUILD_DIR)/tools/mkenvimage -b -s $(ENV_SIZE) \
+		-o $(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-uboot-env.bin \
+		files/$(BUILD_VARIANT)-uEnv.txt
+endef
+
+define Package/u-boot/install/default
+endef
+
+$(eval $(call Download,uboot-qoriq-toolchain))
+$(eval $(call BuildPackage/U-Boot))

package/boot/uboot-qoriq/files/fsl_T4240RDB-nor-uEnv.txt

@@ -0,0 +1,8 @@
+bootm_size=0x180000000
+loadaddr=0x2000000
+fwaddr=0xe8000000
+hwconfig=fsl_ddr:ctlr_intlv=3way_4KB,bank_intlv=auto;usb1:dr_mode=host,phy_type=utmi
+nor_boot=bootm $fwaddr
+bootargs=console=ttyS0,115200
+bootcmd=echo starting OpenWrt ...;run nor_boot
+bootdelay=3

package/boot/uboot-qoriq/files/fsl_T4240RDB-sdboot-uEnv.txt

@@ -0,0 +1,7 @@
+bootm_size=0x180000000
+loadaddr=0x2000000
+hwconfig=fsl_ddr:ctlr_intlv=3way_4KB,bank_intlv=auto;usb1:dr_mode=host,phy_type=utmi
+sd_boot=ext4load mmc 0:1 $loadaddr fitImage;bootm $loadaddr
+bootargs=root=/dev/mmcblk0p2 rw rootwait rootfstype=squashfs,f2fs noinitrd console=ttyS0,115200 mtdparts=fe8000000.nor:126m(firmware-nor),1m(cortina-ucode),128k(fman),128k(u-boot-env),768k(u-boot)
+bootcmd=echo starting OpeWwrt ...;run sd_boot
+bootdelay=3

package/boot/uboot-qoriq/patches/100-mpc85xx-adjust-T4240RDB-config-for-OpenWrt.patch

@@ -0,0 +1,68 @@
+From ec36a44809e22a60fc153a4078d35c83a2bf9676 Mon Sep 17 00:00:00 2001
+From: Pawel Dembicki <paweldembicki@gmail.com>
+Date: Thu, 6 Oct 2022 15:18:38 +0200
+Subject: [PATCH] mpc85xx: adjust T4240RDB config for OpenWrt
+
+Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
+---
+ configs/T4240RDB_SDCARD_defconfig | 6 ++++--
+ include/configs/T4240RDB.h        | 6 +++++-
+ 2 files changed, 9 insertions(+), 3 deletions(-)
+
+--- a/configs/T4240RDB_SDCARD_defconfig
++++ b/configs/T4240RDB_SDCARD_defconfig
+@@ -4,7 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
+ CONFIG_SPL_LIBGENERIC_SUPPORT=y
+ CONFIG_SF_DEFAULT_SPEED=10000000
+ CONFIG_ENV_SIZE=0x2000
+-CONFIG_ENV_OFFSET=0x100000
++CONFIG_ENV_OFFSET=0x101000
+ CONFIG_DEFAULT_DEVICE_TREE="t4240rdb"
+ CONFIG_SYS_MONITOR_LEN=786432
+ CONFIG_SPL_MMC=y
+@@ -35,7 +35,7 @@ CONFIG_FIT_VERBOSE=y
+ CONFIG_RAMBOOT_PBL=y
+ CONFIG_SYS_FSL_PBL_PBI="$(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg"
+ CONFIG_SYS_FSL_PBL_RCW="$(SRCTREE)/board/freescale/t4rdb/t4_sd_rcw.cfg"
+-CONFIG_BOOTDELAY=10
++CONFIG_BOOTDELAY=1
+ CONFIG_OF_BOARD_SETUP=y
+ CONFIG_OF_STDOUT_VIA_ALIAS=y
+ CONFIG_USE_BOOTCOMMAND=y
+@@ -71,6 +71,7 @@ CONFIG_CMD_DHCP=y
+ CONFIG_CMD_MII=y
+ CONFIG_CMD_PING=y
+ CONFIG_CMD_EXT2=y
++CONFIG_CMD_EXT4=y
+ CONFIG_CMD_FAT=y
+ CONFIG_OF_CONTROL=y
+ CONFIG_ENV_OVERWRITE=y
+@@ -108,7 +109,8 @@ CONFIG_SPI_FLASH_SST=y
+ CONFIG_PHYLIB=y
+ CONFIG_PHYLIB_10G=y
+ CONFIG_PHY_CORTINA=y
+-CONFIG_CORTINA_FW_ADDR=0x77f000
++CONFIG_SYS_CORTINA_FW_IN_MMC=y
++CONFIG_CORTINA_FW_ADDR=0x200000
+ CONFIG_PHY_TERANETICS=y
+ CONFIG_PHY_VITESSE=y
+ CONFIG_DM_MDIO=y
+--- a/configs/T4240RDB_defconfig
++++ b/configs/T4240RDB_defconfig
+@@ -26,7 +26,7 @@ CONFIG_SYS_FSL_NUM_CC_PLLS=5
+ CONFIG_MP=y
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+-CONFIG_BOOTDELAY=10
++CONFIG_BOOTDELAY=1
+ CONFIG_OF_BOARD_SETUP=y
+ CONFIG_OF_STDOUT_VIA_ALIAS=y
+ CONFIG_USE_BOOTCOMMAND=y
+@@ -76,6 +76,7 @@ CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+ CONFIG_SYS_FLASH_EMPTY_INFO=y
+ CONFIG_SYS_FLASH_CFI=y
+ CONFIG_SYS_FLASH_QUIET_TEST=y
++CONFIG_SYS_MALLOC_F_LEN=0x1000
+ CONFIG_SYS_MAX_FLASH_SECT=1024
+ CONFIG_SYS_MAX_FLASH_BANKS=2
+ CONFIG_DM_SPI_FLASH=y

package/boot/uboot-qoriq/patches/900-Revert-fsl-mxc-Drop-legacy-I2c.patch

@@ -0,0 +1,44 @@
+From 7041fc96942acca920699b354e956bc4966c9b00 Mon Sep 17 00:00:00 2001
+From: Pawel Dembicki <paweldembicki@gmail.com>
+Date: Wed, 19 Nov 2025 11:58:10 +0100
+Subject: [PATCH] Revert "fsl: mxc: Drop legacy I2c"
+
+This reverts commit 98dfa70f84f036c7423f1eddf00af8ea555fed8f.
+
+It broke SDCARD boot in T4240RDB.
+
+Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
+---
+ drivers/ddr/fsl/main.c | 3 ++-
+ drivers/i2c/mxc_i2c.c  | 1 -
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/ddr/fsl/main.c
++++ b/drivers/ddr/fsl/main.c
+@@ -111,7 +111,7 @@ static int ddr_i2c_read(DEV_TYPE *dev, u
+ #if CONFIG_IS_ENABLED(DM_I2C)
+ 	ret = dm_i2c_read(dev, 0, buf, len);
+ #else
+-	ret = 0;
++	ret = i2c_read(dev->chip, addr, alen, buf, len);
+ #endif
+ 
+ 	return ret;
+@@ -162,6 +162,7 @@ static void __get_spd(generic_spd_eeprom
+ 	};
+ 	dev = &ldev;
+ 
++	i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM);
+ #endif
+ 
+ #ifdef CONFIG_SYS_FSL_DDR4
+--- a/drivers/i2c/mxc_i2c.c
++++ b/drivers/i2c/mxc_i2c.c
+@@ -619,7 +619,6 @@ int enable_i2c_clk(unsigned char enable,
+ 	__attribute__((weak, alias("__enable_i2c_clk")));
+ 
+ #if !CONFIG_IS_ENABLED(DM_I2C)
+-
+ /*
+  * Read data from I2C device
+  *

package/boot/uboot-rockchip/Makefile

@@ -174,6 +174,13 @@ define U-Boot/rk3528/Default
   TPL:=rk3528_ddr_1056MHz_v1.11.bin
 endef
 
+define U-Boot/hinlink-h28k-rk3528
+  $(U-Boot/rk3528/Default)
+  NAME:=HINLINK H28K
+  BUILD_DEVICES:= \
+    hinlink_h28k
+endef
+
 define U-Boot/radxa-e20c-rk3528
   $(U-Boot/rk3528/Default)
   NAME:=E20C
@@ -420,6 +427,7 @@ UBOOT_TARGETS := \
   rock64-rk3328 \
   rock-pi-e-rk3328 \
   rock-pi-e-v3-rk3328 \
+  hinlink-h28k-rk3528 \
   radxa-e20c-rk3528 \
   rock-2-rk3528 \
   nanopi-r3s-rk3566 \

package/boot/uboot-rockchip/patches/107-board-rockchip-add-HINLINK-H28K.patch

@@ -0,0 +1,378 @@
+From df056584b1825957ad118b6c1084aae00b1fa0b7 Mon Sep 17 00:00:00 2001
+From: Chukun Pan <amadeus@jmu.edu.cn>
+Date: Wed, 3 Dec 2025 20:03:22 +0800
+Subject: [PATCH] board: rockchip: add HINLINK H28K
+
+The HINLINK H28K is a single board computer based on the
+RK3528 SoC. Add support for the HINLINK H28K board.
+
+Features tested on HINLINK H28K:
+- SD-card boot
+- eMMC boot
+- Ethernet
+
+Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
+---
+
+--- /dev/null
++++ b/arch/arm/dts/rk3528-hinlink-h28k-u-boot.dtsi
+@@ -0,0 +1,11 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++
++#include "rk3528-u-boot.dtsi"
++
++&vdd_arm {
++	regulator-init-microvolt = <953000>;
++};
++
++&vdd_logic {
++	regulator-init-microvolt = <900000>;
++};
+--- /dev/null
++++ b/configs/hinlink-h28k-rk3528_defconfig
+@@ -0,0 +1,64 @@
++CONFIG_ARM=y
++CONFIG_SKIP_LOWLEVEL_INIT=y
++CONFIG_COUNTER_FREQUENCY=24000000
++CONFIG_ARCH_ROCKCHIP=y
++CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3528-hinlink-h28k"
++CONFIG_ROCKCHIP_RK3528=y
++CONFIG_SYS_LOAD_ADDR=0xc00800
++CONFIG_DEBUG_UART_BASE=0xFF9F0000
++CONFIG_DEBUG_UART_CLOCK=24000000
++CONFIG_DEBUG_UART=y
++CONFIG_DEFAULT_FDT_FILE="rockchip/rk3528-hinlink-h28k.dtb"
++# CONFIG_DISPLAY_CPUINFO is not set
++CONFIG_BOARD_RNG_SEED=y
++CONFIG_SPL_MAX_SIZE=0x40000
++# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
++CONFIG_CMD_MEMINFO=y
++CONFIG_CMD_MEMINFO_MAP=y
++CONFIG_CMD_ADC=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_MISC=y
++CONFIG_CMD_MMC=y
++CONFIG_CMD_USB=y
++CONFIG_CMD_ROCKUSB=y
++CONFIG_CMD_USB_MASS_STORAGE=y
++# CONFIG_CMD_SETEXPR is not set
++CONFIG_CMD_RNG=y
++CONFIG_CMD_REGULATOR=y
++# CONFIG_SPL_DOS_PARTITION is not set
++CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
++CONFIG_BUTTON=y
++CONFIG_BUTTON_ADC=y
++# CONFIG_USB_FUNCTION_FASTBOOT is not set
++CONFIG_ROCKCHIP_GPIO=y
++CONFIG_LED=y
++CONFIG_LED_GPIO=y
++CONFIG_SUPPORT_EMMC_RPMB=y
++CONFIG_MMC_DW=y
++CONFIG_MMC_DW_ROCKCHIP=y
++CONFIG_MMC_SDHCI=y
++CONFIG_MMC_SDHCI_SDMA=y
++CONFIG_MMC_SDHCI_ROCKCHIP=y
++CONFIG_PHY_REALTEK=y
++CONFIG_DM_MDIO=y
++CONFIG_DWC_ETH_QOS=y
++CONFIG_DWC_ETH_QOS_ROCKCHIP=y
++CONFIG_PHY_ROCKCHIP_INNO_USB2=y
++CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
++CONFIG_REGULATOR_PWM=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_PWM_ROCKCHIP=y
++CONFIG_BAUDRATE=1500000
++CONFIG_DEBUG_UART_SHIFT=2
++CONFIG_SYS_NS16550_MEM32=y
++CONFIG_USB=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_EHCI_GENERIC=y
++CONFIG_USB_DWC3=y
++CONFIG_USB_DWC3_GENERIC=y
++CONFIG_USB_GADGET=y
++CONFIG_USB_GADGET_DOWNLOAD=y
++CONFIG_USB_FUNCTION_ROCKUSB=y
++CONFIG_ERRNO_STR=y
+--- /dev/null
++++ b/dts/upstream/src/arm64/rockchip/rk3528-hinlink-h28k.dts
+@@ -0,0 +1,278 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++
++/dts-v1/;
++
++#include <dt-bindings/input/input.h>
++#include <dt-bindings/leds/common.h>
++#include <dt-bindings/pwm/pwm.h>
++#include "rk3528.dtsi"
++
++/ {
++	model = "HINLINK H28K";
++	compatible = "hinlink,h28k", "rockchip,rk3528";
++
++	aliases {
++		ethernet0 = &gmac1;
++		mmc0 = &sdhci;
++		mmc1 = &sdmmc;
++		serial0 = &uart0;
++	};
++
++	chosen {
++		stdout-path = "serial0:1500000n8";
++	};
++
++	keys {
++		compatible = "adc-keys";
++		io-channels = <&saradc 0>;
++		io-channel-names = "buttons";
++		keyup-threshold-microvolt = <1800000>;
++		poll-interval = <100>;
++
++		button-boot {
++			label = "BOOT";
++			linux,code = <KEY_SETUP>;
++			press-threshold-microvolt = <0>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++		pinctrl-names = "default";
++		pinctrl-0 = <&lan_led>, <&wan_led>, <&work_led>;
++
++		led-0 {
++			color = <LED_COLOR_ID_AMBER>;
++			function = LED_FUNCTION_LAN;
++			gpios = <&gpio4 RK_PC1 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "netdev";
++		};
++
++		led-1 {
++			color = <LED_COLOR_ID_BLUE>;
++			function = LED_FUNCTION_WAN;
++			gpios = <&gpio4 RK_PC0 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "netdev";
++		};
++
++		led-2 {
++			color = <LED_COLOR_ID_GREEN>;
++			function = LED_FUNCTION_STATUS;
++			gpios = <&gpio4 RK_PB7 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "default-on";
++		};
++	};
++
++	vdd_0v9: regulator-0v9-vdd {
++		compatible = "regulator-fixed";
++		regulator-name = "vdd_0v9";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <900000>;
++		regulator-max-microvolt = <900000>;
++		vin-supply = <&vcc5v0_sys>;
++	};
++
++	vcc_ddr: regulator-1v1-vcc-ddr {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc_ddr";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <1100000>;
++		regulator-max-microvolt = <1100000>;
++		vin-supply = <&vcc5v0_sys>;
++	};
++
++	vcc_1v8: regulator-1v8-vcc {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc_1v8";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <1800000>;
++		regulator-max-microvolt = <1800000>;
++		vin-supply = <&vcc_3v3>;
++	};
++
++	vcc_3v3: regulator-3v3-vcc {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc_3v3";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		vin-supply = <&vcc5v0_sys>;
++	};
++
++	vcc3v3_sd: regulator-3v3-vcc-sd {
++		compatible = "regulator-fixed";
++		gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&sdmmc_pwren_l>;
++		regulator-name = "vcc3v3_sd";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		vin-supply = <&vcc_3v3>;
++	};
++
++	vcc5v0_sys: regulator-5v0-vcc-sys {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc5v0_sys";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++	};
++
++	vccio_sd: regulator-vccio-sd {
++		compatible = "regulator-gpio";
++		gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&sdmmc_vol_ctrl_h>;
++		regulator-name = "vccio_sd";
++		regulator-min-microvolt = <1800000>;
++		regulator-max-microvolt = <3300000>;
++		states = <1800000 0x0>, <3300000 0x1>;
++		vin-supply = <&vcc5v0_sys>;
++	};
++
++	vdd_arm: regulator-vdd-arm {
++		compatible = "pwm-regulator";
++		pwms = <&pwm1 0 5000 PWM_POLARITY_INVERTED>;
++		pwm-supply = <&vcc5v0_sys>;
++		regulator-name = "vdd_arm";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <746000>;
++		regulator-max-microvolt = <1201000>;
++		regulator-settling-time-up-us = <250>;
++	};
++
++	vdd_logic: regulator-vdd-logic {
++		compatible = "pwm-regulator";
++		pwms = <&pwm2 0 5000 PWM_POLARITY_INVERTED>;
++		pwm-supply = <&vcc5v0_sys>;
++		regulator-name = "vdd_logic";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <705000>;
++		regulator-max-microvolt = <1006000>;
++		regulator-settling-time-up-us = <250>;
++	};
++};
++
++&cpu0 {
++	cpu-supply = <&vdd_arm>;
++};
++
++&cpu1 {
++	cpu-supply = <&vdd_arm>;
++};
++
++&cpu2 {
++	cpu-supply = <&vdd_arm>;
++};
++
++&cpu3 {
++	cpu-supply = <&vdd_arm>;
++};
++
++&gmac1 {
++	clock_in_out = "output";
++	phy-handle = <&rgmii_phy>;
++	phy-mode = "rgmii-id";
++	phy-supply = <&vcc_3v3>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&rgmii_miim>,
++		    <&rgmii_tx_bus2>,
++		    <&rgmii_rx_bus2>,
++		    <&rgmii_rgmii_clk>,
++		    <&rgmii_rgmii_bus>;
++	status = "okay";
++};
++
++&mdio1 {
++	rgmii_phy: ethernet-phy@1 {
++		compatible = "ethernet-phy-ieee802.3-c22";
++		reg = <0x1>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&gmac1_rstn_l>;
++		reset-assert-us = <20000>;
++		reset-deassert-us = <100000>;
++		reset-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
++	};
++};
++
++&pinctrl {
++	gmac {
++		gmac1_rstn_l: gmac1-rstn-l {
++			rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	leds {
++		lan_led: lan-led {
++			rockchip,pins = <4 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		wan_led: wan-led {
++			rockchip,pins = <4 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		work_led: work-led {
++			rockchip,pins = <4 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	sdmmc {
++		sdmmc_pwren_l: sdmmc-pwren-l {
++			rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		sdmmc_vol_ctrl_h: sdmmc-vol-ctrl-h {
++			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++};
++
++&pwm1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pwm1m0_pins>;
++	status = "okay";
++};
++
++&pwm2 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pwm2m0_pins>;
++	status = "okay";
++};
++
++&saradc {
++	vref-supply = <&vcc_1v8>;
++	status = "okay";
++};
++
++&sdhci {
++	bus-width = <8>;
++	cap-mmc-highspeed;
++	mmc-hs200-1_8v;
++	non-removable;
++	vmmc-supply = <&vcc_3v3>;
++	vqmmc-supply = <&vcc_1v8>;
++	status = "okay";
++};
++
++&sdmmc {
++	bus-width = <4>;
++	cap-sd-highspeed;
++	disable-wp;
++	sd-uhs-sdr104;
++	vmmc-supply = <&vcc3v3_sd>;
++	vqmmc-supply = <&vccio_sd>;
++	status = "okay";
++};
++
++&uart0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart0m0_xfer>;
++	status = "okay";
++};

package/boot/uboot-sunxi/Makefile

@@ -137,14 +137,14 @@ endef
 define U-Boot/OLIMEX_A13_SOM
   BUILD_SUBTARGET:=cortexa8
   NAME:=Olimex A13 SOM
-  BUILD_DEVICES:=olimex_a13-olimex-som
+  BUILD_DEVICES:=olimex_a13-olinuxino
 endef
 
 define U-Boot/licheepi_nano
   BUILD_SUBTARGET:=arm926ejs
   NAME:=LicheePi Nano
   UENV:=f1c
-  BUILD_DEVICES:=licheepi-nano
+  BUILD_DEVICES:=licheepi_licheepi-nano
 endef
 
 define U-Boot/Linksprite_pcDuino
@@ -268,7 +268,7 @@ define U-Boot/popstick
   BUILD_SUBTARGET:=arm926ejs
   NAME:=PopStick
   UENV:=f1c
-  BUILD_DEVICES:=popstick-v1.1
+  BUILD_DEVICES:=sourceparts_popstick-v1.1
 endef
 
 define U-Boot/libretech_all_h3_cc_h5
@@ -319,13 +319,13 @@ endef
 define U-Boot/bananapi_m2_plus_h3
   BUILD_SUBTARGET:=cortexa7
   NAME:=Bananapi M2 Plus H3
-  BUILD_DEVICES:=sinovoip_bananapi-m2-plus
+  BUILD_DEVICES:=sinovoip_bpi-m2-plus
 endef
 
 define U-Boot/Sinovoip_BPI_M3
   BUILD_SUBTARGET:=cortexa7
   NAME:=Bananapi M3
-  BUILD_DEVICES:=sinovoip_bananapi-m3
+  BUILD_DEVICES:=sinovoip_bpi-m3
 endef
 
 define U-Boot/sopine_baseboard
@@ -385,19 +385,19 @@ endef
 define U-Boot/Bananapi_M2_Ultra
   BUILD_SUBTARGET:=cortexa7
   NAME:=Bananapi M2 Ultra
-  BUILD_DEVICES:=sinovoip_bananapi-m2-ultra
+  BUILD_DEVICES:=sinovoip_bpi-m2-ultra
 endef
 
 define U-Boot/bananapi_m2_berry
   BUILD_SUBTARGET:=cortexa7
   NAME:=Bananapi M2 Berry
-  BUILD_DEVICES:=sinovoip_bananapi-m2-berry
+  BUILD_DEVICES:=sinovoip_bpi-m2-berry
 endef
 
 define U-Boot/bananapi_p2_zero
   BUILD_SUBTARGET:=cortexa7
   NAME:=Bananapi P2 Zero
-  BUILD_DEVICES:=sinovoip_bananapi-p2-zero
+  BUILD_DEVICES:=sinovoip_bpi-p2-zero
 endef
 
 

package/boot/uboot-tools/uboot-envtools/files/mediatek_filogic

@@ -28,6 +28,7 @@ asus,zenwifi-bt8-ubootmod|\
 cmcc,a10-ubootmod|\
 comfast,cf-wr632ax-ubootmod|\
 cudy,tr3000-v1-ubootmod|\
+cudy,wbr3000uax-v1-ubootmod|\
 h3c,magic-nx30-pro|\
 imou,hx21|\
 jcg,q30-pro|\
@@ -37,10 +38,12 @@ netcore,n60|\
 netcore,n60-pro|\
 netis,nx30v2|\
 netis,nx31|\
+netis,nx32u|\
 nokia,ea0326gmp|\
 openwrt,one|\
 qihoo,360t7|\
 routerich,ax3000-ubootmod|\
+routerich,be7200|\
 snr,snr-cpe-ax2|\
 tplink,tl-xdr4288|\
 tplink,tl-xdr6086|\
@@ -56,6 +59,7 @@ acer,predator-w6|\
 acer,predator-w6d|\
 acer,vero-w6m|\
 glinet,gl-mt2500|\
+glinet,gl-mt2500-airoha|\
 glinet,gl-mt6000|\
 glinet,gl-x3000|\
 glinet,gl-xe3000|\
@@ -134,6 +138,7 @@ teltonika,rutc50)
 	ubootenv_add_mtd "u-boot-env" "0x0" "0x10000" "0x10000"
 	;;
 tplink,archer-ax80-v1|\
+tplink,archer-ax80-v1-eu|\
 tplink,be450)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000" "8"
 	;;

package/boot/uboot-tools/uboot-envtools/files/mpc85xx

@@ -20,9 +20,13 @@ ocedo,panda)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
 	ubootenv_add_uci_config "/dev/mtd2" "0x0" "0x20000" "0x20000"
 	;;
-watchguard,firebox-t10)
+watchguard,firebox-t10|\
+watchguard,firebox-t15)
 	ubootenv_add_uci_config "$(find_mtd_part 'u-boot-env')" "0x0" "0x2000" "0x10000"
 	;;
+watchguard,xtm330)
+	ubootenv_add_uci_config "/dev/mtd4" "0x0" "0x10000" "0x10000"
+	;;
 aerohive,hiveap-330)
 	ubootenv_add_uci_config "$(find_mtd_part 'u-boot-env')" "0x0" "0x20000" "0x10000"
 	;;

package/boot/uboot-tools/uboot-envtools/files/qoriq

@@ -5,9 +5,35 @@ touch /etc/config/ubootenv
 . /lib/uboot-envtools.sh
 . /lib/functions.sh
 
+platform_get_rootfs_device() {
+    local majmin sys path
+
+    majmin="$(awk '$5=="/rom"{print $3; exit}' /proc/self/mountinfo 2>/dev/null)"
+    [ -n "$majmin" ] || exit 1
+
+    sys="/sys/dev/block/$majmin"
+    [ -e "$sys" ] || exit 1
+
+    path="$(readlink -f "$sys" 2>/dev/null)" || exit 1
+    basename "$path"
+}
+
 board=$(board_name)
 
 case "$board" in
+fsl,T4240RDB)
+	local t4240_rootfs="$(platform_get_rootfs_device)"
+	case "$t4240_rootfs" in
+		mmcblk*)
+			ubootenv_add_uci_config "/dev/mmcblk0" "0x101000" "0x2000" "0x1000"
+		;;
+		mtdblock*)
+			ubootenv_add_uci_config "/dev/mtd6" "0x0" "0x2000" "0x20000"
+		;;
+		*)
+			exit 1
+	esac
+	;;
 watchguard,firebox-m300)
 	ubootenv_add_uci_config "/dev/mtd9" "0x0" "0x2000" "0x10000"
 	;;

package/boot/uboot-tools/uboot-envtools/files/qualcommax_ipq50xx

@@ -10,7 +10,8 @@ board=$(board_name)
 case "$board" in
 cmcc,pz-l8|\
 elecom,wrc-x3000gs2|\
-iodata,wn-dax3000gr)
+iodata,wn-dax3000gr|\
+zyxel,scr50axe)
 	ubootenv_add_mtd "0:appsblenv" "0x0" "0x40000" "0x20000"
 	;;
 glinet,gl-b3000)
@@ -19,6 +20,7 @@ glinet,gl-b3000)
 linksys,mr5500|\
 linksys,mx2000|\
 linksys,mx5500|\
+linksys,mx6200|\
 linksys,spnmx56)
 	ubootenv_add_mtd "u_env" "0x0" "0x40000" "0x20000"
 	;;

package/devel/binutils/Makefile

@@ -93,6 +93,9 @@ CONFIGURE_ARGS += \
 	--without-msgpack \
 	--disable-gprofng
 
+MAKE_VARS+= \
+	CPPFLAGS="$(TARGET_CPPFLAGS)"
+
 define Build/Install
 	$(call Build/Install/Default)
 	$(MAKE) -C $(PKG_BUILD_DIR)/libiberty \

package/devel/gdb/Makefile

@@ -76,10 +76,12 @@ TARGET_LDFLAGS+= \
 	-static-libstdc++ \
 	-Wl,--gc-sections
 
+MAKE_VARS+= \
+	CPPFLAGS="$(TARGET_CPPFLAGS)"
+
 define Build/Install
 	$(MAKE) -C $(PKG_BUILD_DIR) \
 		DESTDIR="$(PKG_INSTALL_DIR)" \
-		CPPFLAGS="$(TARGET_CPPFLAGS)" \
 		install-gdb install-gdbserver
 endef
 

package/firmware/ipq-wifi/Makefile

@@ -6,9 +6,9 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/firmware/qca-wireless.git
-PKG_SOURCE_DATE:=2025-11-15
-PKG_SOURCE_VERSION:=7c6b7545f69a3ef3ddaaff68fc97e9e172117e2e
-PKG_MIRROR_HASH:=ac77840bafd111b3cc3d6cfc7a3b770fdaabb929209c38cd2109be2efd575dae
+PKG_SOURCE_DATE:=2026-01-28
+PKG_SOURCE_VERSION:=88514e5aab3e1c0dabad81c7ace815c2fa45565a
+PKG_MIRROR_HASH:=d51f25001a8cf166bc6d42372861b4290c69dae1f8aaeb9b1e5d85f4b06f8545
 PKG_FLAGS:=nonshared
 
 include $(INCLUDE_DIR)/package.mk
@@ -55,6 +55,7 @@ ALLWIFIBOARDS:= \
 	linksys_mx4200 \
 	linksys_mx5300 \
 	linksys_mx5500 \
+	linksys_mx6200 \
 	linksys_mx8500 \
 	linksys_spnmx56 \
 	linksys_whw03 \
@@ -63,6 +64,7 @@ ALLWIFIBOARDS:= \
 	netgear_lbr20 \
 	netgear_rax120v2 \
 	netgear_rbk20 \
+	netgear_rbk40 \
 	netgear_sxk80 \
 	netgear_wax214 \
 	netgear_wax218 \
@@ -79,13 +81,14 @@ ALLWIFIBOARDS:= \
 	tplink_deco-x80-5g \
 	tplink_eap610-outdoor \
 	tplink_eap620hd-v1 \
-	tplink_eap623od-hd-v1 \
+	tplink_eap623-outdoor-hd-v1 \
 	tplink_eap625-outdoor-hd-v1 \
 	tplink_eap660hd-v1 \
 	tplink_archer-c59-v1 \
 	tplink_archer-c6-v2 \
 	tplink_archer-c60-v1 \
 	tplink_archer-c60-v2 \
+	tplink_tl-wa1201-v2 \
 	wallys_dr40x9 \
 	xiaomi_aiot-ac2350 \
 	xiaomi_ax3600 \
@@ -103,7 +106,8 @@ ALLWIFIBOARDS:= \
 	zte_mf287 \
 	zte_mf287plus \
 	zyxel_nbg7815 \
-	zyxel_nwa210ax
+	zyxel_nwa210ax \
+	zyxel_scr50axe
 
 ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
 
@@ -234,6 +238,7 @@ $(eval $(call generate-ipq-wifi-package,linksys_mx2000,Linksys MX2000))
 $(eval $(call generate-ipq-wifi-package,linksys_mx4200,Linksys MX4200))
 $(eval $(call generate-ipq-wifi-package,linksys_mx5300,Linksys MX5300))
 $(eval $(call generate-ipq-wifi-package,linksys_mx5500,Linksys MX5500))
+$(eval $(call generate-ipq-wifi-package,linksys_mx6200,Linksys MX6200))
 $(eval $(call generate-ipq-wifi-package,linksys_mx8500,Linksys MX8500))
 $(eval $(call generate-ipq-wifi-package,linksys_spnmx56,Linksys SPNMX56))
 $(eval $(call generate-ipq-wifi-package,linksys_whw03,Linksys WHW03))
@@ -242,6 +247,7 @@ $(eval $(call generate-ipq-wifi-package,meraki_z3,Meraki Z3))
 $(eval $(call generate-ipq-wifi-package,netgear_lbr20,Netgear LBR20))
 $(eval $(call generate-ipq-wifi-package,netgear_rax120v2,Netgear RAX120v2))
 $(eval $(call generate-ipq-wifi-package,netgear_rbk20,Netgear RBK20))
+$(eval $(call generate-ipq-wifi-package,netgear_rbk40,Netgear RBK40))
 $(eval $(call generate-ipq-wifi-package,netgear_sxk80,Netgear SXK80))
 $(eval $(call generate-ipq-wifi-package,netgear_wax214,Netgear WAX214))
 $(eval $(call generate-ipq-wifi-package,netgear_wax218,Netgear WAX218))
@@ -258,13 +264,14 @@ $(eval $(call generate-ipq-wifi-package,spectrum_sax1v1k,Spectrum SAX1V1K))
 $(eval $(call generate-ipq-wifi-package,tplink_deco-x80-5g,TP-Link Deco X80-5G))
 $(eval $(call generate-ipq-wifi-package,tplink_eap610-outdoor,TPLink EAP610-Outdoor))
 $(eval $(call generate-ipq-wifi-package,tplink_eap620hd-v1,TP-Link EAP620 HD v1))
-$(eval $(call generate-ipq-wifi-package,tplink_eap623od-hd-v1,TP-Link EAP623-Outdoor HD v1))
+$(eval $(call generate-ipq-wifi-package,tplink_eap623-outdoor-hd-v1,TP-Link EAP623-Outdoor HD v1))
 $(eval $(call generate-ipq-wifi-package,tplink_eap625-outdoor-hd-v1,TP-Link EAP625-Outdoor HD v1))
 $(eval $(call generate-ipq-wifi-package,tplink_eap660hd-v1,TP-Link EAP660 HD v1))
 $(eval $(call generate-ipq-wifi-package,tplink_archer-c59-v1,TP-Link Archer C59 V1))
 $(eval $(call generate-ipq-wifi-package,tplink_archer-c6-v2,TP-Link Archer C6 V2))
 $(eval $(call generate-ipq-wifi-package,tplink_archer-c60-v1,TP-Link Archer C60 V1))
 $(eval $(call generate-ipq-wifi-package,tplink_archer-c60-v2,TP-Link Archer C60 V2))
+$(eval $(call generate-ipq-wifi-package,tplink_tl-wa1201-v2,TP-Link TL-WA1201 V2))
 $(eval $(call generate-ipq-wifi-package,wallys_dr40x9,Wallys DR40X9))
 $(eval $(call generate-ipq-wifi-package,xiaomi_aiot-ac2350,Xiaomi AIoT AC2350))
 $(eval $(call generate-ipq-wifi-package,xiaomi_ax3600,Xiaomi AX3600))
@@ -283,5 +290,6 @@ $(eval $(call generate-ipq-wifi-package,zte_mf287,ZTE MF287))
 $(eval $(call generate-ipq-wifi-package,zte_mf287plus,ZTE MF287Plus))
 $(eval $(call generate-ipq-wifi-package,zyxel_nbg7815,Zyxel NBG7815))
 $(eval $(call generate-ipq-wifi-package,zyxel_nwa210ax,Zyxel NWA210AX))
+$(eval $(call generate-ipq-wifi-package,zyxel_scr50axe,Zyxel SCR50AXE))
 
 $(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))

package/firmware/layerscape/fman-ucode/Makefile

@@ -24,8 +24,8 @@ define Package/layerscape-fman
   SECTION:=firmware
   CATEGORY:=Firmware
   TITLE:=NXP FMan ucode
-  DEPENDS:=@TARGET_layerscape
-  DEFAULT:=y if TARGET_layerscape_armv8_64b
+  DEPENDS:=@TARGET_layerscape||TARGET_qoriq
+  DEFAULT:=y if TARGET_layerscape_armv8_64b||TARGET_qoriq
   HIDDEN:=1
 endef
 
@@ -38,6 +38,8 @@ define Build/InstallDev
 		$(STAGING_DIR_IMAGE)/fsl_ls1043a-rdb-fman.bin
 	$(CP) $(PKG_BUILD_DIR)/fsl_fman_ucode_ls1046_r1.0_106_4_18.bin \
 		$(STAGING_DIR_IMAGE)/fsl_ls1046a-rdb-fman.bin
+	$(CP) $(PKG_BUILD_DIR)/fsl_fman_ucode_t4240_r2.0_106_4_18.bin \
+		$(STAGING_DIR_IMAGE)/fsl_t4240-rdb-fman.bin
 endef
 
 $(eval $(call BuildPackage,layerscape-fman))

package/firmware/layerscape/ls-rcw/Makefile

@@ -24,8 +24,8 @@ define Package/layerscape-rcw
   SECTION:=firmware
   CATEGORY:=Firmware
   TITLE:=NXP Layerscape RCW binaries
-  DEPENDS:=@TARGET_layerscape
-  DEFAULT:=y if TARGET_layerscape_armv7
+  DEPENDS:=@TARGET_layerscape||TARGET_qoriq
+  DEFAULT:=y if TARGET_layerscape_armv7||TARGET_qoriq
   HIDDEN:=1
 endef
 
@@ -46,7 +46,8 @@ BOARDS := \
   ls2088a-rdb \
   lx2160a-rdb \
   lx2160a-rdb-sdboot \
-  ls1021a-twr
+  ls1021a-twr \
+  T4240RDB \
 
 RCW_ls1012a-rdb         :=ls1012ardb/R_SPNH_3508/rcw_1000_default.bin
 RCW_ls1012a-frdm        :=ls1012afrdm/N_SSNP_3305/rcw_800.bin
@@ -65,6 +66,7 @@ RCW_ls2088a-rdb         :=ls2088ardb/FFFFFFFF_PP_HH_0x2a_0x41/rcw_1800.bin
 RCW_lx2160a-rdb         :=lx2160ardb_rev2/XGGFF_PP_HHHH_RR_19_5_2/rcw_2000_700_2900_19_5_2.bin
 RCW_lx2160a-rdb-sdboot  :=lx2160ardb_rev2/XGGFF_PP_HHHH_RR_19_5_2/rcw_2000_700_2900_19_5_2.bin
 RCW_ls1021a-twr         :=ls1021atwr/SSR_PNS_30/rcw_1200.bin
+RCW_T4240RDB            :=t4240rdb/SSFFPPH_27_55_1_9/rcw_27_55_1_9_1666MHz.bin
 
 define Build/InstallDev
 	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)

package/firmware/layerscape/ls-rcw/patches/0003-fix_rcw_for_t4240rdb.patch

@@ -0,0 +1,42 @@
+--- /dev/null
++++ b/t4240rdb/a008098.rcw
+@@ -0,0 +1,31 @@
++/*
++ * Work-around for erratum A-008098
++ *
++ * Description:
++ * The PCI Express controller may fail to discard a bad packet when there
++ * are excessive, correctable errors resulting in corrupted memory.
++ *
++ * Impact:
++ * While running in an environment with many correctable errors the PCI
++ * Express controller can corrupt memory.
++ *
++ * T4240RDB have only 0x100 bytes for PBI in eeprom. Unused pcie must be deleted.
++ */
++
++.pbi
++write 0x240000, 0x87000048
++write 0x240004, 0x80802040
++write 0x240000, 0x8700004c
++write 0x240004, 0x02c02000
++write 0x240000, 0x87000050
++write 0x240004, 0x00002000
++
++write 0x260000, 0x87000048
++write 0x260004, 0x80802040
++write 0x260000, 0x8700004c
++write 0x260004, 0x02c02000
++write 0x260000, 0x87000050
++write 0x260004, 0x00002000
++
++flush
++.end
+--- a/t4240rdb/SSFFPPH_27_55_1_9/rcw_27_55_1_9_1666MHz.rcw
++++ b/t4240rdb/SSFFPPH_27_55_1_9/rcw_27_55_1_9_1666MHz.rcw
+@@ -60,4 +60,4 @@ write 0x124010, 0x00000101
+ write 0x124130, 0x0000000c
+ .end
+ 
+-#include <../t4240qds/a008098.rcw>
++#include <a008098.rcw>

package/firmware/linux-firmware/intel.mk

@@ -219,7 +219,7 @@ $(eval $(call BuildPackage,iwlwifi-firmware-ax411))
 Package/iwlwifi-firmware-be200 = $(call Package/firmware-default,Intel BE200 firmware)
 define Package/iwlwifi-firmware-be200/install
 	$(INSTALL_DIR) $(1)/lib/firmware
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/intel/iwlwifi/iwlwifi-gl-c0-fm-c0-98.ucode $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/intel/iwlwifi/iwlwifi-gl-c0-fm-c0-101.ucode $(1)/lib/firmware
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/intel/iwlwifi/iwlwifi-gl-c0-fm-c0.pnvm $(1)/lib/firmware
 endef
 $(eval $(call BuildPackage,iwlwifi-firmware-be200))

package/kernel/ath10k-ct/Makefile

@@ -34,7 +34,7 @@ define KernelPackage/ath10k-ct
 	$(PKG_BUILD_DIR)/ath10k$(CT_KVER)/ath10k_pci.ko \
 	$(PKG_BUILD_DIR)/ath10k$(CT_KVER)/ath10k_core.ko
   AUTOLOAD:=$(call AutoProbe,ath10k_pci)
-  PROVIDES:=kmod-ath10k
+  PROVIDES:=@kmod-ath10k-any
   VARIANT:=regular
 endef
 

package/kernel/lantiq/vrx518_tc/patches/208-dcdp-ptm_tc-fix-rx_len_adj.patch

@@ -0,0 +1,14 @@
+Fixes leaking the ethernet FCS into the frame payload on the RX
+path.
+
+--- a/dcdp/ptm_tc.c
++++ b/dcdp/ptm_tc.c
+@@ -923,7 +923,7 @@ static void ptm_fw_init(struct ptm_ep_pr
+ 	rx_gitf_cfg.rx_inserted_bytes_1h = 0;
+ 	rx_gitf_cfg.rx_inserted_bytes_2l = 0;
+ 	rx_gitf_cfg.rx_inserted_bytes_2h = 0;
+-	rx_gitf_cfg.rx_len_adj		= -2;
++	rx_gitf_cfg.rx_len_adj		= is_bonding ? -2 : -6;
+ 	for (i = 0; i < 4; i++) {
+ 		dst_addr = __RX_GIF0_CFG_STATS_CFG +
+ 			(i * DW_SZ(rx_gitf_cfg));

package/kernel/linux/modules/crypto.mk

@@ -624,11 +624,7 @@ define KernelPackage/crypto-lib-curve25519
   FILES:= \
 	$(LINUX_DIR)/lib/crypto/libcurve25519.ko \
 	$(LINUX_DIR)/lib/crypto/libcurve25519-generic.ko
-  $(call AddDepends/crypto,+PACKAGE_kmod-crypto-kpp:kmod-crypto-kpp)
-endef
-
-define KernelPackage/crypto-lib-curve25519/config
-  imply PACKAGE_kmod-crypto-kpp
+  $(call AddDepends/crypto,+kmod-crypto-kpp)
 endef
 
 ifndef CONFIG_TARGET_uml
@@ -661,11 +657,7 @@ define KernelPackage/crypto-lib-poly1305
   KCONFIG:=CONFIG_CRYPTO_LIB_POLY1305
   HIDDEN:=1
   FILES:=$(LINUX_DIR)/lib/crypto/libpoly1305.ko
-  $(call AddDepends/crypto,+PACKAGE_kmod-crypto-hash:kmod-crypto-hash)
-endef
-
-define KernelPackage/crypto-lib-poly1305/config
-  imply PACKAGE_kmod-crypto-hash
+  $(call AddDepends/crypto,+kmod-crypto-hash)
 endef
 
 ifndef CONFIG_TARGET_uml

package/kernel/linux/modules/hwmon.mk

@@ -493,6 +493,25 @@ endef
 $(eval $(call KernelPackage,pmbus-core))
 
 
+define KernelPackage/pmbus-sensors
+  TITLE:=Generic PMBus devices monitoring support
+  KCONFIG:=CONFIG_SENSORS_PMBUS
+  FILES:=$(LINUX_DIR)/drivers/hwmon/pmbus/pmbus.ko
+  AUTOLOAD:=$(call AutoProbe,pmbus)
+  $(call AddDepends/hwmon,+kmod-pmbus-core)
+endef
+
+define KernelPackage/pmbus-sensors/description
+ Kernel modules for generic PMBus devices,
+including but not limited to ADP4000, BMR310, BMR453,
+BMR454, BMR456, BMR457, BMR458, BMR480, BMR490, BMR491, BMR492,
+MAX20796, MDT040, NCP4200, NCP4208, PDT003, PDT006, PDT012,
+TPS40400, TPS544B20, TPS544B25, TPS544C20, TPS544C25, and UDT020.
+endef
+
+$(eval $(call KernelPackage,pmbus-sensors))
+
+
 define KernelPackage/pmbus-zl6100
   TITLE:=Intersil / Zilker Labs ZL6100 hardware monitoring
   KCONFIG:=CONFIG_SENSORS_ZL6100

package/kernel/linux/modules/netdevices.mk

@@ -621,6 +621,23 @@ endef
 
 $(eval $(call KernelPackage,phy-aquantia))
 
+
+define KernelPackage/phy-motorcomm
+  SUBMENU:=$(NETWORK_DEVICES_MENU)
+  TITLE:=Motorcomm Ethernet PHYs
+  DEPENDS:=+kmod-libphy
+  KCONFIG:=CONFIG_MOTORCOMM_PHY
+  FILES:=$(LINUX_DIR)/drivers/net/phy/motorcomm.ko
+  AUTOLOAD:=$(call AutoLoad,18,motorcomm,1)
+endef
+
+define KernelPackage/phy-motorcomm/description
+  Supports the Motorcomm 8511/8521/8531/8531S/8821 Ethernet PHYs
+endef
+
+$(eval $(call KernelPackage,phy-motorcomm))
+
+
 define KernelPackage/dsa
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=Distributed Switch Architecture support
@@ -1207,6 +1224,7 @@ define KernelPackage/r8169
     CONFIG_R8169_LEDS=y
   FILES:=$(LINUX_DIR)/drivers/net/ethernet/realtek/r8169.ko
   AUTOLOAD:=$(call AutoProbe,r8169,1)
+  DEFAULT_VARIANT:=1
 endef
 
 define KernelPackage/r8169/description
@@ -2326,3 +2344,21 @@ define KernelPackage/enc28j60/description
 endef
 
 $(eval $(call KernelPackage,enc28j60))
+
+define KernelPackage/sparx5-switch
+  SUBMENU:=$(NETWORK_DEVICES_MENU)
+  TITLE:=Sparx5 switch driver
+  DEPENDS:=@TARGET_microchipsw +kmod-phylink +kmod-ptp
+  KCONFIG:= \
+  CONFIG_SPARX5_SWITCH \
+  CONFIG_LAN969X_SWITCH=y \
+  CONFIG_SPARX5_DCB=y
+  FILES:=$(LINUX_DIR)/drivers/net/ethernet/microchip/sparx5/sparx5-switch.ko
+  AUTOLOAD:=$(call AutoProbe,sparx5-switch,1)
+endef
+
+define KernelPackage/sparx5-switch/description
+  This driver supports the Sparx5 network switch device.
+endef
+
+$(eval $(call KernelPackage,sparx5-switch))

package/kernel/linux/modules/netsupport.mk

@@ -1654,3 +1654,68 @@ define KernelPackage/packet-diag
 endef
 
 $(eval $(call KernelPackage,packet-diag))
+
+define KernelPackage/team
+  SUBMENU:=$(NETWORK_SUPPORT_MENU)
+  TITLE:=Ethernet team driver
+  KCONFIG:=CONFIG_NET_TEAM
+  FILES:=$(LINUX_DIR)/drivers/net/team/team.ko
+  AUTOLOAD:=$(call AutoProbe,team)
+endef
+
+$(eval $(call KernelPackage,team))
+
+define KernelPackage/team-mode-broadcast
+  SUBMENU:=$(NETWORK_SUPPORT_MENU)
+  TITLE:=Broadcast mode support
+  DEPENDS:=kmod-team
+  KCONFIG:=CONFIG_NET_TEAM_MODE_BROADCAST
+  FILES:=$(LINUX_DIR)/drivers/net/team/team_mode_broadcast.ko
+  AUTOLOAD:=$(call AutoProbe,team_mode_broadcast)
+endef
+
+$(eval $(call KernelPackage,team-mode-broadcast))
+
+define KernelPackage/team-mode-roundrobin
+  SUBMENU:=$(NETWORK_SUPPORT_MENU)
+  TITLE:=Round-robin mode support
+  DEPENDS:=kmod-team
+  KCONFIG:=CONFIG_NET_TEAM_MODE_ROUNDROBIN
+  FILES:=$(LINUX_DIR)/drivers/net/team/team_mode_roundrobin.ko
+  AUTOLOAD:=$(call AutoProbe,team_mode_roundrobin)
+endef
+
+$(eval $(call KernelPackage,team-mode-roundrobin))
+
+define KernelPackage/team-mode-random
+  SUBMENU:=$(NETWORK_SUPPORT_MENU)
+  TITLE:=Random mode support
+  DEPENDS:=kmod-team
+  KCONFIG:=CONFIG_NET_TEAM_MODE_RANDOM
+  FILES:=$(LINUX_DIR)/drivers/net/team/team_mode_random.ko
+  AUTOLOAD:=$(call AutoProbe,team_mode_random)
+endef
+
+$(eval $(call KernelPackage,team-mode-random))
+
+define KernelPackage/team-mode-activebackup
+  SUBMENU:=$(NETWORK_SUPPORT_MENU)
+  TITLE:=Active-backup mode support
+  DEPENDS:=kmod-team
+  KCONFIG:=CONFIG_NET_TEAM_MODE_ACTIVEBACKUP
+  FILES:=$(LINUX_DIR)/drivers/net/team/team_mode_activebackup.ko
+  AUTOLOAD:=$(call AutoProbe,team_mode_activebackup)
+endef
+
+$(eval $(call KernelPackage,team-mode-activebackup))
+
+define KernelPackage/team-mode-loadbalance
+  SUBMENU:=$(NETWORK_SUPPORT_MENU)
+  TITLE:=Load-balance mode support
+  DEPENDS:=kmod-team
+  KCONFIG:=CONFIG_NET_TEAM_MODE_LOADBALANCE
+  FILES:=$(LINUX_DIR)/drivers/net/team/team_mode_loadbalance.ko
+  AUTOLOAD:=$(call AutoProbe,team_mode_loadbalance)
+endef
+
+$(eval $(call KernelPackage,team-mode-loadbalance))

package/kernel/linux/modules/other.mk

@@ -990,7 +990,7 @@ $(eval $(call KernelPackage,tpm))
 define KernelPackage/tpm-tis
   SUBMENU:=$(OTHER_MENU)
   TITLE:=TPM TIS 1.2 Interface / TPM 2.0 FIFO Interface
-	DEPENDS:= @(TARGET_x86||TARGET_armsr) +kmod-tpm
+	DEPENDS:= @(TARGET_x86||TARGET_armsr||TARGET_imx) +kmod-tpm
   KCONFIG:= CONFIG_TCG_TIS
   FILES:= \
 	$(LINUX_DIR)/drivers/char/tpm/tpm_tis.ko \
@@ -1007,6 +1007,27 @@ endef
 
 $(eval $(call KernelPackage,tpm-tis))
 
+define KernelPackage/tpm-tis-spi
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=TPM TIS 1.3 Interface SPI Interface
+	DEPENDS:= +kmod-tpm-tis +kmod-spi-dev
+  KCONFIG:= CONFIG_TCG_TIS_SPI \
+	CONFIG_TCG_TIS_SPI_CR50=n
+  FILES:= \
+	$(LINUX_DIR)/drivers/char/tpm/tpm_tis_spi.ko
+  AUTOLOAD:=$(call AutoLoad,20,tpm_tis_spi,1)
+endef
+
+define KernelPackage/tpm-tis-spi/description
+	If you have a TPM security chip which is connected to a regular,
+	non-tcg SPI master that is compliant with the
+	TCG TIS 1.3 TPM specification (TPM1.2) or the TCG PTP FIFO
+	specification (TPM2.0) say Yes and it will be accessible from
+	within Linux.
+endef
+
+$(eval $(call KernelPackage,tpm-tis-spi))
+
 define KernelPackage/tpm-i2c-atmel
   SUBMENU:=$(OTHER_MENU)
   TITLE:=TPM I2C Atmel Support

package/kernel/linux/modules/usb.mk

@@ -154,6 +154,24 @@ endef
 
 $(eval $(call KernelPackage,usb-gadget-hid))
 
+define KernelPackage/usb-gadget-fs
+  TITLE:=USB FunctionFS Gadget Support
+  KCONFIG:=CONFIG_USB_FUNCTIONFS \
+    CONFIG_USB_FUNCTIONFS_ETH=n \
+    CONFIG_USB_FUNCTIONFS_RNDIS=n
+  FILES:= \
+	  $(LINUX_DIR)/drivers/usb/gadget/legacy/g_ffs.ko \
+	  $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_fs.ko
+  AUTOLOAD:=$(call AutoLoad,52,usb_f_fs)
+  $(call AddDepends/usbgadget,+kmod-usb-lib-composite +kmod-dma-buf)
+endef
+
+define KernelPackage/usb-gadget-fs/description
+  Kernel support for USB FunctionFS Gadget.
+endef
+
+$(eval $(call KernelPackage,usb-gadget-fs))
+
 define KernelPackage/usb-gadget-ehci-debug
   TITLE:=USB EHCI debug port Gadget support
   KCONFIG:=\
@@ -1842,6 +1860,7 @@ define KernelPackage/usb3
   TITLE:=Support for USB3 controllers
   DEPENDS:= \
 	+kmod-usb-xhci-hcd \
+	+TARGET_airoha_an7581:kmod-usb-xhci-mtk \
 	+TARGET_bcm53xx:kmod-usb-bcma \
 	+TARGET_bcm53xx:kmod-phy-bcm-ns-usb3 \
 	+TARGET_ramips_mt7621:kmod-usb-xhci-mtk \

package/kernel/mac80211/Makefile

@@ -10,13 +10,13 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=mac80211
 
-PKG_VERSION:=6.18
+PKG_VERSION:=6.18.7
 PKG_RELEASE:=1
 PKG_LICENSE:=GPL-2.0-only
 PKG_LICENSE_FILES:=COPYING
 
 PKG_SOURCE_URL:=https://github.com/openwrt/backports/releases/download/backports-v$(PKG_VERSION)
-PKG_HASH:=3bd5d84b1e56cf8addff0d1e4bcf06753c51feee88c4d7925fb7b67784529436
+PKG_HASH:=623e5cf46ca8e81fd413f4f465e2580a0143e24929f9c22ce1ba7c34f2872989
 
 PKG_SOURCE:=backports-$(PKG_VERSION).tar.zst
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(if $(BUILD_VARIANT),$(PKG_NAME)-$(BUILD_VARIANT)/)backports-$(PKG_VERSION)

package/kernel/mac80211/ath.mk

@@ -265,7 +265,7 @@ This module adds support for wireless adapters based on
 Atheros USB AR9271 and AR7010 family of chipsets.
 endef
 
-define KernelPackage/ath10k
+define KernelPackage/ath10k/Default
   $(call KernelPackage/mac80211/Default)
   TITLE:=Atheros 802.11ac wireless cards support
   URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath10k
@@ -276,7 +276,12 @@ define KernelPackage/ath10k
 	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_pci.ko
   AUTOLOAD:=$(call AutoProbe,ath10k_core ath10k_pci)
   MODPARAMS.ath10k_core:=frame_mode=2
+endef
+
+define KernelPackage/ath10k
+  $(call KernelPackage/ath10k/Default)
   VARIANT:=regular
+  DEFAULT_VARIANT:=1
 endef
 
 define KernelPackage/ath10k/description
@@ -299,9 +304,10 @@ define KernelPackage/ath10k/config
 endef
 
 define KernelPackage/ath10k-smallbuffers
-  $(call KernelPackage/ath10k)
+  $(call KernelPackage/ath10k/Default)
   TITLE+= (small buffers for low-RAM devices)
   VARIANT:=smallbuffers
+  PROVIDES:=@kmod-ath10k-any
 endef
 
 define KernelPackage/ath11k

package/kernel/mac80211/patches/ath10k/921-ath10k_init_devices_synchronously.patch

@@ -14,7 +14,7 @@ Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
 
 --- a/drivers/net/wireless/ath/ath10k/core.c
 +++ b/drivers/net/wireless/ath/ath10k/core.c
-@@ -3586,6 +3586,16 @@ int ath10k_core_register(struct ath10k *
+@@ -3583,6 +3583,16 @@ int ath10k_core_register(struct ath10k *
  
  	queue_work(ar->workqueue, &ar->register_work);
  

package/kernel/mac80211/patches/ath10k/981-ath10k-adjust-tx-power-reduction-for-US-regulatory-d.patch

@@ -28,7 +28,7 @@ Forwarded: no
 
 --- a/drivers/net/wireless/ath/ath10k/mac.c
 +++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -1052,6 +1052,40 @@ static inline int ath10k_vdev_delete_syn
+@@ -1051,6 +1051,40 @@ static inline int ath10k_vdev_delete_syn
  	return 0;
  }
  
@@ -69,7 +69,7 @@ Forwarded: no
  static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id)
  {
  	struct cfg80211_chan_def *chandef = NULL;
-@@ -1084,7 +1118,8 @@ static int ath10k_monitor_vdev_start(str
+@@ -1083,7 +1117,8 @@ static int ath10k_monitor_vdev_start(str
  	arg.channel.min_power = 0;
  	arg.channel.max_power = channel->max_power * 2;
  	arg.channel.max_reg_power = channel->max_reg_power * 2;
@@ -79,7 +79,7 @@ Forwarded: no
  
  	reinit_completion(&ar->vdev_setup_done);
  	reinit_completion(&ar->vdev_delete_done);
-@@ -1530,7 +1565,8 @@ static int ath10k_vdev_start_restart(str
+@@ -1529,7 +1564,8 @@ static int ath10k_vdev_start_restart(str
  	arg.channel.min_power = 0;
  	arg.channel.max_power = chandef->chan->max_power * 2;
  	arg.channel.max_reg_power = chandef->chan->max_reg_power * 2;
@@ -89,7 +89,7 @@ Forwarded: no
  
  	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
  		arg.ssid = arvif->u.ap.ssid;
-@@ -3461,7 +3497,8 @@ static int ath10k_update_channel_list(st
+@@ -3460,7 +3496,8 @@ static int ath10k_update_channel_list(st
  			ch->min_power = 0;
  			ch->max_power = channel->max_power * 2;
  			ch->max_reg_power = channel->max_reg_power * 2;

package/kernel/mac80211/patches/ath10k/984-ath10k-Try-to-get-mac-address-from-dts.patch

@@ -18,7 +18,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
 
 --- a/drivers/net/wireless/ath/ath10k/core.c
 +++ b/drivers/net/wireless/ath/ath10k/core.c
-@@ -11,6 +11,7 @@
+@@ -10,6 +10,7 @@
  #include <linux/module.h>
  #include <linux/firmware.h>
  #include <linux/of.h>
@@ -26,7 +26,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
  #include <linux/property.h>
  #include <linux/dmi.h>
  #include <linux/ctype.h>
-@@ -3458,6 +3459,8 @@ static int ath10k_core_probe_fw(struct a
+@@ -3455,6 +3456,8 @@ static int ath10k_core_probe_fw(struct a
  
  	device_get_mac_address(ar->dev, ar->mac_addr);
  

package/kernel/mac80211/patches/ath11k/100-wifi-ath11k-use-unique-QRTR-instance-ID.patch

@@ -140,7 +140,7 @@ Signed-off-by: Robert Marko <robimarko@gmail.com>
  int ath11k_mhi_register(struct ath11k_pci *ar_pci);
 --- a/drivers/net/wireless/ath/ath11k/pci.c
 +++ b/drivers/net/wireless/ath/ath11k/pci.c
-@@ -376,13 +376,20 @@ static void ath11k_pci_sw_reset(struct a
+@@ -394,13 +394,20 @@ static void ath11k_pci_sw_reset(struct a
  static void ath11k_pci_init_qmi_ce_config(struct ath11k_base *ab)
  {
  	struct ath11k_qmi_ce_cfg *cfg = &ab->qmi.ce_cfg;

package/kernel/mac80211/patches/ath11k/924-wifi-ath11k-add-multipd-support-for-QCN6122.patch

@@ -99,7 +99,7 @@ Signed-off-by: George Moussalem <george.moussalem@outlook.com>
  	struct ath11k_targ_cap target_caps;
 --- a/drivers/net/wireless/ath/ath11k/pci.c
 +++ b/drivers/net/wireless/ath/ath11k/pci.c
-@@ -391,6 +391,8 @@ static void ath11k_pci_init_qmi_ce_confi
+@@ -409,6 +409,8 @@ static void ath11k_pci_init_qmi_ce_confi
  	} else
  		ab->qmi.service_ins_id = ab->hw_params.qmi_service_ins_id;
  

package/kernel/mac80211/patches/ath11k/932-wifi-ath11k-poll-reo-status-ipq5018.patch

@@ -1,164 +0,0 @@
-From d890c6d602307c9297df12c7d0287f9ffd26208b Mon Sep 17 00:00:00 2001
-From: Sriram R <srirrama@codeaurora.org>
-Date: Wed, 12 May 2021 19:21:09 +0530
-Subject: [PATCH] ath11k: poll reo status ring for IPQ5018
-
-Currently reo status interrupts are not received
-due to wrong mapping of the reo status interrupt
-line in IPQ5018.
-
-Hence, until the mapping is resolved in HW, use
-polling to reap the reo status ring. Rather than
-a period timer to reap the ring, the timer is
-triggered only on sending a reo command with
-status request.
-
-Without proper reaping of the ring, backpressure
-and ring full issues are seen in multi client test
-setups which leads to flooding the console with
-error messages reporting failure to send reo cmds.
-
-Can be reverted once HW solution is available.
-
-Signed-off-by: Sriram R <srirrama@codeaurora.org>
----
---- a/drivers/net/wireless/ath/ath11k/core.c
-+++ b/drivers/net/wireless/ath/ath11k/core.c
-@@ -729,6 +729,7 @@ static struct ath11k_hw_params ath11k_hw
- 		.support_fw_mac_sequence = false,
- 		.support_dual_stations = false,
- 		.pdev_suspend = false,
-+		.reo_status_poll = true,
- 	},
- 	{
- 		.name = "qca2066 hw2.1",
---- a/drivers/net/wireless/ath/ath11k/dp.c
-+++ b/drivers/net/wireless/ath/ath11k/dp.c
-@@ -350,12 +350,66 @@ void ath11k_dp_stop_shadow_timers(struct
- 	ath11k_dp_shadow_stop_timer(ab, &ab->dp.reo_cmd_timer);
- }
- 
-+static void ath11k_dp_handle_reo_status_timer(struct timer_list *timer)
-+{
-+	struct ath11k_dp *dp = from_timer(dp, timer, reo_status_timer);
-+	struct ath11k_base *ab = dp->ab;
-+
-+	spin_lock_bh(&dp->reo_cmd_lock);
-+	dp->reo_status_timer_running = false;
-+	spin_unlock_bh(&dp->reo_cmd_lock);
-+
-+	ath11k_dp_process_reo_status(ab);
-+}
-+
-+void ath11k_dp_start_reo_status_timer(struct ath11k_base *ab)
-+{
-+	struct ath11k_dp *dp = &ab->dp;
-+
-+	if (!ab->hw_params.reo_status_poll)
-+		return;
-+
-+	spin_lock_bh(&dp->reo_cmd_lock);
-+	if (dp->reo_status_timer_running) {
-+		spin_unlock_bh(&dp->reo_cmd_lock);
-+		return;
-+	}
-+	dp->reo_status_timer_running = true;
-+	spin_unlock_bh(&dp->reo_cmd_lock);
-+
-+	mod_timer(&dp->reo_status_timer, jiffies +
-+		  msecs_to_jiffies(ATH11K_REO_STATUS_POLL_TIMEOUT_MS));
-+}
-+
-+static void ath11k_dp_stop_reo_status_timer(struct ath11k_base *ab)
-+{
-+	struct ath11k_dp *dp = &ab->dp;
-+
-+	if (!ab->hw_params.reo_status_poll)
-+		return;
-+
-+	del_timer_sync(&dp->reo_status_timer);
-+	dp->reo_status_timer_running = false;
-+}
-+
-+static void ath11k_dp_init_reo_status_timer(struct ath11k_base *ab)
-+{
-+	struct ath11k_dp *dp = &ab->dp;
-+
-+	if (!ab->hw_params.reo_status_poll)
-+		return;
-+
-+	timer_setup(&dp->reo_status_timer,
-+		    ath11k_dp_handle_reo_status_timer, 0);
-+}
-+
- static void ath11k_dp_srng_common_cleanup(struct ath11k_base *ab)
- {
- 	struct ath11k_dp *dp = &ab->dp;
- 	int i;
- 
- 	ath11k_dp_stop_shadow_timers(ab);
-+	ath11k_dp_stop_reo_status_timer(ab);
- 	ath11k_dp_srng_cleanup(ab, &dp->wbm_desc_rel_ring);
- 	ath11k_dp_srng_cleanup(ab, &dp->tcl_cmd_ring);
- 	ath11k_dp_srng_cleanup(ab, &dp->tcl_status_ring);
-@@ -377,6 +431,8 @@ static int ath11k_dp_srng_common_setup(s
- 	int i, ret;
- 	u8 tcl_num, wbm_num;
- 
-+	ath11k_dp_init_reo_status_timer(ab);
-+
- 	ret = ath11k_dp_srng_setup(ab, &dp->wbm_desc_rel_ring,
- 				   HAL_SW2WBM_RELEASE, 0, 0,
- 				   DP_WBM_RELEASE_RING_SIZE);
---- a/drivers/net/wireless/ath/ath11k/dp.h
-+++ b/drivers/net/wireless/ath/ath11k/dp.h
-@@ -46,6 +46,8 @@ struct dp_rx_tid {
- #define DP_MON_PURGE_TIMEOUT_MS     100
- #define DP_MON_SERVICE_BUDGET       128
- 
-+#define ATH11K_REO_STATUS_POLL_TIMEOUT_MS 10
-+
- struct dp_reo_cache_flush_elem {
- 	struct list_head list;
- 	struct dp_rx_tid data;
-@@ -287,6 +289,10 @@ struct ath11k_dp {
- 	spinlock_t reo_cmd_lock;
- 	struct ath11k_hp_update_timer reo_cmd_timer;
- 	struct ath11k_hp_update_timer tx_ring_timer[DP_TCL_NUM_RING_MAX];
-+
-+	/* reo status timer and flags */
-+	struct timer_list reo_status_timer;
-+	bool reo_status_timer_running;
- };
- 
- /* HTT definitions */
-@@ -1690,5 +1696,6 @@ void ath11k_dp_shadow_init_timer(struct
- 				 struct ath11k_hp_update_timer *update_timer,
- 				 u32 interval, u32 ring_id);
- void ath11k_dp_stop_shadow_timers(struct ath11k_base *ab);
-+void ath11k_dp_start_reo_status_timer(struct ath11k_base *ab);
- 
- #endif
---- a/drivers/net/wireless/ath/ath11k/dp_tx.c
-+++ b/drivers/net/wireless/ath/ath11k/dp_tx.c
-@@ -788,6 +788,10 @@ int ath11k_dp_tx_send_reo_cmd(struct ath
- 	if (cmd_num == 0)
- 		return -EINVAL;
- 
-+	/* Trigger reo status polling if required */
-+	if (cmd->flag & HAL_REO_CMD_FLG_NEED_STATUS)
-+		ath11k_dp_start_reo_status_timer(ab);
-+
- 	if (!cb)
- 		return 0;
- 
---- a/drivers/net/wireless/ath/ath11k/hw.h
-+++ b/drivers/net/wireless/ath/ath11k/hw.h
-@@ -233,6 +233,7 @@ struct ath11k_hw_params {
- 	bool support_fw_mac_sequence;
- 	bool support_dual_stations;
- 	bool pdev_suspend;
-+	bool reo_status_poll;
- };
- 
- struct ath11k_hw_ops {

package/kernel/mac80211/patches/ath11k/948-wifi-ath11k-Fix-the-WMM-param-type.patch

@@ -0,0 +1,24 @@
+From c420c1f66235b5ab4fc8d94da72bd5ae6397117f Mon Sep 17 00:00:00 2001
+From: Gautham Kumar Senthilkumaran <gauthamk@qti.qualcomm.com>
+Date: Mon, 19 Jan 2026 11:55:51 +0100
+Subject: [PATCH] wifi: ath11k: Fix the WMM param type
+
+Since FW does not support the 11ax EDCA parameter in WMI TLV command.
+FW was crashing as host was sending this parameter, now changed the
+WMM parameter type as default zero before sending to FW.
+
+Fixes: b78c02f7c710 ("wifi: ath11k: add support for MU EDCA")
+Signed-off-by: Gautham Kumar Senthilkumaran <gauthamk@qti.qualcomm.com>
+Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
+
+--- a/drivers/net/wireless/ath/ath11k/wmi.c
++++ b/drivers/net/wireless/ath/ath11k/wmi.c
+@@ -2682,7 +2682,7 @@ int ath11k_wmi_send_wmm_update_cmd_tlv(s
+ 			  FIELD_PREP(WMI_TLV_LEN, sizeof(*cmd) - TLV_HDR_SIZE);
+ 
+ 	cmd->vdev_id = vdev_id;
+-	cmd->wmm_param_type = wmm_param_type;
++	cmd->wmm_param_type = WMI_WMM_PARAM_TYPE_LEGACY;
+ 
+ 	for (ac = 0; ac < WME_NUM_AC; ac++) {
+ 		switch (ac) {

package/kernel/mac80211/patches/ath12k/100-ath12k-prevent-ltssm-startup-crash.patch

@@ -5,7 +5,7 @@ But have issues on BPI-Rx boards.
 
 --- a/drivers/net/wireless/ath/ath12k/pci.c
 +++ b/drivers/net/wireless/ath/ath12k/pci.c
-@@ -279,6 +279,9 @@ static void ath12k_pci_enable_ltssm(stru
+@@ -297,6 +297,9 @@ static void ath12k_pci_enable_ltssm(stru
  	u32 val;
  	int i;
  

package/kernel/mac80211/patches/ath12k/102-wifi-ath12k-limit-WMI_SCAN_CHAN_LIST_CMDID-arg.patch

@@ -130,7 +130,7 @@ Best regards,
 
 --- a/drivers/net/wireless/ath/ath12k/wmi.c
 +++ b/drivers/net/wireless/ath/ath12k/wmi.c
-@@ -2891,6 +2891,9 @@ int ath12k_wmi_send_scan_chan_list_cmd(s
+@@ -2894,6 +2894,9 @@ int ath12k_wmi_send_scan_chan_list_cmd(s
  		max_chan_limit = (wmi->wmi_ab->max_msg_len[ar->pdev_idx] - len) /
  			sizeof(*chan_info);
  

package/kernel/mac80211/patches/ath12k/103-wifi-ath12k-fix-5GHz-operation-on-wideband-QCN.patch

@@ -124,7 +124,7 @@ Best regards,
 
 --- a/drivers/net/wireless/ath/ath12k/mac.c
 +++ b/drivers/net/wireless/ath/ath12k/mac.c
-@@ -7723,9 +7723,7 @@ static void ath12k_mac_setup_ht_vht_cap(
+@@ -7724,9 +7724,7 @@ static void ath12k_mac_setup_ht_vht_cap(
  						    rate_cap_rx_chainmask);
  	}
  

package/kernel/mac80211/patches/ath12k/200-Revert-wifi-ath12k-convert-tasklet-to-BH-workqueue-f.patch

@@ -23,7 +23,7 @@ This reverts commit cdad737160571a98cc4933a62c9f2728e965ab27.
  	struct ath12k_ce_ring *status_ring;
 --- a/drivers/net/wireless/ath/ath12k/pci.c
 +++ b/drivers/net/wireless/ath/ath12k/pci.c
-@@ -430,9 +430,9 @@ static void ath12k_pci_sync_ce_irqs(stru
+@@ -448,9 +448,9 @@ static void ath12k_pci_sync_ce_irqs(stru
  	}
  }
  
@@ -35,7 +35,7 @@ This reverts commit cdad737160571a98cc4933a62c9f2728e965ab27.
  	int irq_idx = ATH12K_PCI_IRQ_CE0_OFFSET + ce_pipe->pipe_num;
  
  	ath12k_ce_per_engine_service(ce_pipe->ab, ce_pipe->pipe_num);
-@@ -454,7 +454,7 @@ static irqreturn_t ath12k_pci_ce_interru
+@@ -472,7 +472,7 @@ static irqreturn_t ath12k_pci_ce_interru
  
  	disable_irq_nosync(ab->irq_num[irq_idx]);
  
@@ -44,7 +44,7 @@ This reverts commit cdad737160571a98cc4933a62c9f2728e965ab27.
  
  	return IRQ_HANDLED;
  }
-@@ -684,7 +684,7 @@ static int ath12k_pci_config_irq(struct
+@@ -702,7 +702,7 @@ static int ath12k_pci_config_irq(struct
  
  		irq_idx = ATH12K_PCI_IRQ_CE0_OFFSET + i;
  
@@ -53,7 +53,7 @@ This reverts commit cdad737160571a98cc4933a62c9f2728e965ab27.
  
  		ret = request_irq(irq, ath12k_pci_ce_interrupt_handler,
  				  ab_pci->irq_flags, irq_name[irq_idx],
-@@ -967,7 +967,7 @@ static void ath12k_pci_aspm_restore(stru
+@@ -985,7 +985,7 @@ static void ath12k_pci_aspm_restore(stru
  						   PCI_EXP_LNKCTL_ASPMC);
  }
  
@@ -62,7 +62,7 @@ This reverts commit cdad737160571a98cc4933a62c9f2728e965ab27.
  {
  	int i;
  
-@@ -977,7 +977,7 @@ static void ath12k_pci_cancel_workqueue(
+@@ -995,7 +995,7 @@ static void ath12k_pci_cancel_workqueue(
  		if (ath12k_ce_get_attr_flags(ab, i) & CE_ATTR_DIS_INTR)
  			continue;
  
@@ -71,7 +71,7 @@ This reverts commit cdad737160571a98cc4933a62c9f2728e965ab27.
  	}
  }
  
-@@ -985,7 +985,7 @@ static void ath12k_pci_ce_irq_disable_sy
+@@ -1003,7 +1003,7 @@ static void ath12k_pci_ce_irq_disable_sy
  {
  	ath12k_pci_ce_irqs_disable(ab);
  	ath12k_pci_sync_ce_irqs(ab);

package/kernel/mac80211/patches/build/130-backports-move-__counted_by-to-compiler_types.h-head.patch

@@ -1,64 +0,0 @@
-From b63f79524e6f30e58692bc9ee57c6e6e0dd10de4 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Wed, 10 Dec 2025 22:37:03 +0100
-Subject: [PATCH] backports: move __counted_by to compiler_types.h header
-
-Port f06e108a3dc5 ("Compiler Attributes: disable __counted_by for clang
-< 19.1.3") changes to align with new kernel version that moved the
-__counted_by to a new header file.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
----
- .../linux/compiler_attributes.h               | 15 ------------
- .../backport-include/linux/compiler_types.h   | 23 +++++++++++++++++++
- 2 files changed, 23 insertions(+), 15 deletions(-)
- create mode 100644 backport-include/linux/compiler_types.h
-
---- a/backport-include/linux/compiler_attributes.h
-+++ b/backport-include/linux/compiler_attributes.h
-@@ -31,19 +31,4 @@
- #endif
- #endif /* fallthrough */
- 
--#ifndef __counted_by
--/*
-- * Optional: only supported since gcc >= 14
-- * Optional: only supported since clang >= 17
-- *
-- *   gcc: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108896
-- * clang: https://reviews.llvm.org/D148381
-- */
--#if __has_attribute(__element_count__)
--# define __counted_by(member)		__attribute__((__element_count__(#member)))
--#else
--# define __counted_by(member)
--#endif
--#endif
--
- #endif /* _BACKPORTS_LINUX_COMPILER_ATTRIBUTES_H */
---- /dev/null
-+++ b/backport-include/linux/compiler_types.h
-@@ -0,0 +1,23 @@
-+#ifndef _BACKPORTS_LINUX_COMPILER_TYPES_H
-+#define _BACKPORTS_LINUX_COMPILER_TYPES_H 1
-+
-+#if LINUX_VERSION_IS_GEQ(6,12,1)
-+#include_next <linux/compiler_types.h>
-+#endif
-+
-+#ifndef __counted_by
-+/*
-+ * Optional: only supported since gcc >= 14
-+ * Optional: only supported since clang >= 17
-+ *
-+ *   gcc: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108896
-+ * clang: https://reviews.llvm.org/D148381
-+ */
-+#if __has_attribute(__element_count__)
-+# define __counted_by(member)		__attribute__((__element_count__(#member)))
-+#else
-+# define __counted_by(member)
-+#endif
-+#endif
-+
-+#endif /* _BACKPORTS_LINUX_COMPILER_TYPES_H */

package/kernel/mac80211/patches/build/210-wireless_netns_local_backport.patch

@@ -40,7 +40,7 @@
  		}
  
  		return err;
-@@ -1549,7 +1565,11 @@ static int cfg80211_netdev_notifier_call
+@@ -1550,7 +1566,11 @@ static int cfg80211_netdev_notifier_call
  		SET_NETDEV_DEVTYPE(dev, &wiphy_type);
  		wdev->netdev = dev;
  		/* can only change netns with wiphy */

package/kernel/mac80211/patches/subsys/110-mac80211_keep_keys_on_stop_ap.patch

@@ -9,7 +9,7 @@ Used for AP+STA support in OpenWrt - preserve AP mode keys across STA reconnect
 
 --- a/net/mac80211/cfg.c
 +++ b/net/mac80211/cfg.c
-@@ -1882,12 +1882,6 @@ static int ieee80211_stop_ap(struct wiph
+@@ -1872,12 +1872,6 @@ static int ieee80211_stop_ap(struct wiph
  
  	__sta_info_flush(sdata, true, link_id, NULL);
  

package/kernel/mac80211/patches/subsys/210-ap_scan.patch

@@ -8,7 +8,7 @@ Subject: [PATCH] mac80211: allow scans in access point mode (for site survey)
 
 --- a/net/mac80211/cfg.c
 +++ b/net/mac80211/cfg.c
-@@ -3131,6 +3131,8 @@ static int ieee80211_scan(struct wiphy *
+@@ -3121,6 +3121,8 @@ static int ieee80211_scan(struct wiphy *
  		 */
  		fallthrough;
  	case NL80211_IFTYPE_AP:

package/kernel/mac80211/patches/subsys/305-mac80211-increase-quantum-for-airtime-scheduler.patch

@@ -23,7 +23,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  
 --- a/net/mac80211/tx.c
 +++ b/net/mac80211/tx.c
-@@ -4084,7 +4084,7 @@ struct ieee80211_txq *ieee80211_next_txq
+@@ -4086,7 +4086,7 @@ struct ieee80211_txq *ieee80211_next_txq
  
  		if (deficit < 0)
  			sta->airtime[txqi->txq.ac].deficit +=
@@ -32,7 +32,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  
  		if (deficit < 0 || !aql_check) {
  			list_move_tail(&txqi->schedule_order,
-@@ -4229,7 +4229,8 @@ bool ieee80211_txq_may_transmit(struct i
+@@ -4231,7 +4231,8 @@ bool ieee80211_txq_may_transmit(struct i
  		}
  		sta = container_of(iter->txq.sta, struct sta_info, sta);
  		if (ieee80211_sta_deficit(sta, ac) < 0)
@@ -42,7 +42,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  		list_move_tail(&iter->schedule_order, &local->active_txqs[ac]);
  	}
  
-@@ -4237,7 +4238,7 @@ bool ieee80211_txq_may_transmit(struct i
+@@ -4239,7 +4240,7 @@ bool ieee80211_txq_may_transmit(struct i
  	if (sta->airtime[ac].deficit >= 0)
  		goto out;
  

package/kernel/mac80211/patches/subsys/320-mac80211-add-AQL-support-for-broadcast-packets.patch

@@ -127,7 +127,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  			atomic_add(tx_airtime,
 --- a/net/mac80211/tx.c
 +++ b/net/mac80211/tx.c
-@@ -2554,7 +2554,7 @@ static u16 ieee80211_store_ack_skb(struc
+@@ -2556,7 +2556,7 @@ static u16 ieee80211_store_ack_skb(struc
  
  		spin_lock_irqsave(&local->ack_status_lock, flags);
  		id = idr_alloc(&local->ack_status_frames, ack_skb,
@@ -136,7 +136,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  		spin_unlock_irqrestore(&local->ack_status_lock, flags);
  
  		if (id >= 0) {
-@@ -3985,20 +3985,20 @@ begin:
+@@ -3987,20 +3987,20 @@ begin:
  encap_out:
  	info->control.vif = vif;
  
@@ -167,7 +167,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	}
  
  	return skb;
-@@ -4050,6 +4050,7 @@ struct ieee80211_txq *ieee80211_next_txq
+@@ -4052,6 +4052,7 @@ struct ieee80211_txq *ieee80211_next_txq
  	struct ieee80211_txq *ret = NULL;
  	struct txq_info *txqi = NULL, *head = NULL;
  	bool found_eligible_txq = false;
@@ -175,7 +175,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  
  	spin_lock_bh(&local->active_txq_lock[ac]);
  
-@@ -4073,26 +4074,26 @@ struct ieee80211_txq *ieee80211_next_txq
+@@ -4075,26 +4076,26 @@ struct ieee80211_txq *ieee80211_next_txq
  	if (!head)
  		head = txqi;
  
@@ -214,7 +214,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	if (txqi->schedule_round == local->schedule_round[ac])
  		goto out;
  
-@@ -4159,7 +4160,8 @@ bool ieee80211_txq_airtime_check(struct
+@@ -4161,7 +4162,8 @@ bool ieee80211_txq_airtime_check(struct
  		return true;
  
  	if (!txq->sta)
@@ -224,7 +224,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  
  	if (unlikely(txq->tid == IEEE80211_NUM_TIDS))
  		return true;
-@@ -4208,15 +4210,15 @@ bool ieee80211_txq_may_transmit(struct i
+@@ -4210,15 +4212,15 @@ bool ieee80211_txq_may_transmit(struct i
  
  	spin_lock_bh(&local->active_txq_lock[ac]);
  

package/kernel/mac80211/patches/subsys/350-mac80211-allow-scanning-while-on-radar-channel.patch

@@ -1,6 +1,6 @@
 --- a/net/mac80211/cfg.c
 +++ b/net/mac80211/cfg.c
-@@ -3825,6 +3825,27 @@ static bool ieee80211_is_scan_ongoing(st
+@@ -3815,6 +3815,27 @@ static bool ieee80211_is_scan_ongoing(st
  	return false;
  }
  
@@ -28,7 +28,7 @@
  static int ieee80211_start_radar_detection(struct wiphy *wiphy,
  					   struct net_device *dev,
  					   struct cfg80211_chan_def *chandef,
-@@ -3838,7 +3859,7 @@ static int ieee80211_start_radar_detecti
+@@ -3828,7 +3849,7 @@ static int ieee80211_start_radar_detecti
  
  	lockdep_assert_wiphy(local->hw.wiphy);
  
@@ -37,7 +37,7 @@
  		return -EBUSY;
  
  	link_data = sdata_dereference(sdata->link[link_id], sdata);
-@@ -4330,7 +4351,7 @@ __ieee80211_channel_switch(struct wiphy
+@@ -4320,7 +4341,7 @@ __ieee80211_channel_switch(struct wiphy
  
  	lockdep_assert_wiphy(local->hw.wiphy);
  
@@ -387,7 +387,7 @@
   * the suspend->resume cycle. Since we can't check each caller
 --- a/net/wireless/util.c
 +++ b/net/wireless/util.c
-@@ -2964,6 +2964,9 @@ bool cfg80211_radio_chandef_valid(const
+@@ -2943,6 +2943,9 @@ bool cfg80211_radio_chandef_valid(const
  {
  	u32 freq, width;
  

package/kernel/mac80211/patches/subsys/370-wifi-mac80211-add-MLO-support-to-ieee80211_probe_cli.patch

@@ -9,7 +9,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 
 --- a/net/mac80211/cfg.c
 +++ b/net/mac80211/cfg.c
-@@ -4594,7 +4594,9 @@ static int ieee80211_probe_client(struct
+@@ -4584,7 +4584,9 @@ static int ieee80211_probe_client(struct
  	struct ieee80211_tx_info *info;
  	struct sta_info *sta;
  	struct ieee80211_chanctx_conf *chanctx_conf;
@@ -19,7 +19,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	int ret;
  
  	/* the lock is needed to assign the cookie later */
-@@ -4609,7 +4611,23 @@ static int ieee80211_probe_client(struct
+@@ -4599,7 +4601,23 @@ static int ieee80211_probe_client(struct
  
  	qos = sta->sta.wme;
  
@@ -44,7 +44,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	if (WARN_ON(!chanctx_conf)) {
  		ret = -EINVAL;
  		goto unlock;
-@@ -4641,14 +4659,15 @@ static int ieee80211_probe_client(struct
+@@ -4631,14 +4649,15 @@ static int ieee80211_probe_client(struct
  	nullfunc->frame_control = fc;
  	nullfunc->duration_id = 0;
  	memcpy(nullfunc->addr1, sta->sta.addr, ETH_ALEN);

package/kernel/mt76/patches/0002-wifi-mt76-mt7996-fix-crash-in-mt7996_tx_prepare_skb.patch

@@ -0,0 +1,25 @@
+From f473d66ab595d5f37aedc868bfe407da0a1245c8 Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Wed, 12 Nov 2025 16:32:44 +0000
+Subject: wifi: mt76: mt7996: fix crash in mt7996_tx_prepare_skb
+
+Add missing NULL pointer check. In mesh mode, sta can be NULL even for
+qosdata frames.
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+Upstream: https://github.com/openwrt/mt76/commit/f473d66ab595d5f37aedc868bfe407da0a1245c8
+---
+ mt7996/mac.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/mt7996/mac.c
++++ b/mt7996/mac.c
+@@ -1061,7 +1061,7 @@ int mt7996_tx_prepare_skb(struct mt76_de
+ 	if (!wcid)
+ 		wcid = &dev->mt76.global_wcid;
+ 
+-	if ((is_8023 || ieee80211_is_data_qos(hdr->frame_control)) && sta->mlo &&
++	if ((is_8023 || ieee80211_is_data_qos(hdr->frame_control)) && sta && sta->mlo &&
+ 	    likely(tx_info->skb->protocol != cpu_to_be16(ETH_P_PAE))) {
+ 		u8 tid = tx_info->skb->priority & IEEE80211_QOS_CTL_TID_MASK;
+ 

package/kernel/r8101/Makefile

@@ -21,7 +21,7 @@ define KernelPackage/r8101
   DEPENDS:=@PCI_SUPPORT +kmod-libphy
   FILES:=$(PKG_BUILD_DIR)/src/r8101.ko
   AUTOLOAD:=$(call AutoProbe,r8101,1)
-  PROVIDES:=kmod-r8169
+  PROVIDES:=@kmod-r8169-any
 endef
 
 define Build/Compile

package/kernel/r8125/Makefile

@@ -21,7 +21,7 @@ define KernelPackage/r8125
   DEPENDS:=@PCI_SUPPORT +kmod-libphy
   FILES:=$(PKG_BUILD_DIR)/src/r8125.ko
   AUTOLOAD:=$(call AutoProbe,r8125,1)
-  PROVIDES:=kmod-r8169
+  PROVIDES:=@kmod-r8169-any
   VARIANT:=regular
   PKG_MAKE_FLAGS += CONFIG_ASPM=n
 endef

package/kernel/r8126/Makefile

@@ -21,7 +21,7 @@ define KernelPackage/r8126
   DEPENDS:=@PCI_SUPPORT +kmod-libphy
   FILES:=$(PKG_BUILD_DIR)/src/r8126.ko
   AUTOLOAD:=$(call AutoProbe,r8126,1)
-  PROVIDES:=kmod-r8169
+  PROVIDES:=@kmod-r8169-any
   VARIANT:=regular
 endef
 

package/kernel/r8127/Makefile

@@ -21,7 +21,7 @@ define KernelPackage/r8127
   DEPENDS:=@PCI_SUPPORT +kmod-libphy
   FILES:=$(PKG_BUILD_DIR)/src/r8127.ko
   AUTOLOAD:=$(call AutoProbe,r8127,1)
-  PROVIDES:=kmod-r8169
+  PROVIDES:=@kmod-r8169-any
   VARIANT:=regular
 endef
 

package/kernel/r8168/Makefile

@@ -21,7 +21,7 @@ define KernelPackage/r8168
   DEPENDS:=@PCI_SUPPORT +kmod-libphy
   FILES:=$(PKG_BUILD_DIR)/src/r8168.ko
   AUTOLOAD:=$(call AutoProbe,r8168,1)
-  PROVIDES:=kmod-r8169
+  PROVIDES:=@kmod-r8169-any
   VARIANT:=regular
 endef
 

package/kernel/rtl8812au-ct/Makefile

@@ -28,7 +28,7 @@ define KernelPackage/rtl8812au-ct
   FILES:=\
 	$(PKG_BUILD_DIR)/rtl8812au.ko
   AUTOLOAD:=$(call AutoProbe,rtl8812au)
-  PROVIDES:=kmod-rtl8812au
+  PROVIDES:=@kmod-rtl8812au-any
 endef
 
 NOSTDINC_FLAGS := \

package/libs/elfutils/Makefile

@@ -51,7 +51,6 @@ define Package/libelf
   $(call Package/elfutils/Default)
   DEPENDS:=$(INTL_DEPENDS) +zlib
   TITLE+= (libelf)
-  PROVIDES:=libelf1
 endef
 
 ifeq ($(CONFIG_BUILD_NLS),y)

package/libs/libcap/Makefile

@@ -6,12 +6,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libcap
-PKG_VERSION:=2.77
+PKG_VERSION:=2.69
 PKG_RELEASE:=1
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
 PKG_SOURCE_URL:=@KERNEL/linux/libs/security/linux-privs/libcap2
-PKG_HASH:=897bc18b44afc26c70e78cead3dbb31e154acc24bee085a5a09079a88dbf6f52
+PKG_HASH:=f311f8f3dad84699d0566d1d6f7ec943a9298b28f714cae3c931dfd57492d7eb
 
 PKG_MAINTAINER:=Paul Wassi <p.wassi@gmx.at>
 PKG_LICENSE:=GPL-2.0-only
@@ -66,6 +66,7 @@ MAKE_FLAGS += \
     BUILD_CC="$(CC)" \
     BUILD_CFLAGS="$(FPIC) -I$(PKG_BUILD_DIR)/libcap/include" \
     CFLAGS="$(TARGET_CFLAGS)" \
+    TARGET_CPPFLAGS="$(TARGET_CPPFLAGS)" \
     LD="$(TARGET_CC) -Wl,-x -shared" \
     LDFLAGS="$(TARGET_LDFLAGS)" \
     INDENT="| true" \

package/libs/libcap/patches/002-fix-CPPFLAGS.patch

@@ -0,0 +1,15 @@
+Add variable to extend the CPPFLAGS. When specifying CPPFLAGS, it will 
+replace CPPFLAGS. When giving TARGET_CPPFLAGS it is added to the 
+CPPFLAGS.
+
+--- a/Make.Rules
++++ b/Make.Rules
+@@ -83,7 +83,7 @@ WARNINGS=-Wall -Wwrite-strings -Wpointer
+ COPTS ?= -O2
+ CFLAGS ?= $(COPTS) $(DEBUG)
+ CFLAGS += $(WARNINGS)
+-CPPFLAGS += -Dlinux $(DEFINES) $(LIBCAP_INCLUDES)
++CPPFLAGS += $(TARGET_CPPFLAGS) -Dlinux $(DEFINES) $(LIBCAP_INCLUDES)
+ LDFLAGS ?= # -g
+ 
+ BUILD_CC ?= $(CC)

package/libs/libcap/patches/003-Revert-libcap-Add-build-ldflags-to-_makenames-rule.patch

@@ -1,27 +0,0 @@
-From 542d7d86ecd2129dd5fe7e5b31ba307304f5b319 Mon Sep 17 00:00:00 2001
-From: "Andrew G. Morgan" <morgan@kernel.org>
-Date: Mon, 10 Nov 2025 18:26:34 -0800
-Subject: [PATCH] Revert "libcap: Add build ldflags to _makenames rule"
-
-This reverts commit c3ddf45d9afaab85d3b7db0dc7bfd1aafb8fde50.
-
-The details of what this broke are here:
-
-  https://bugzilla.kernel.org/show_bug.cgi?id=220691#c2
-
-Signed-off-by: Andrew G. Morgan <morgan@kernel.org>
----
- libcap/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/libcap/Makefile
-+++ b/libcap/Makefile
-@@ -80,7 +80,7 @@ $(PSXTITLE).pc: $(PSXTITLE).pc.in
- 		$< >$@
- 
- _makenames: _makenames.c cap_names.list.h
--	$(BUILD_CC) $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $< -o $@ $(BUILD_LDFLAGS)
-+	$(BUILD_CC) $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $< -o $@
- 
- cap_names.h: _makenames
- 	./_makenames > cap_names.h

package/libs/libpcap/Makefile

@@ -8,12 +8,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libpcap
-PKG_VERSION:=1.10.5
-PKG_RELEASE:=3
+PKG_VERSION:=1.10.6
+PKG_RELEASE:=1
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=https://www.tcpdump.org/release/
-PKG_HASH:=37ced90a19a302a7f32e458224a00c365c117905c2cd35ac544b6880a81488f0
+PKG_HASH:=872dd11337fe1ab02ad9d4fee047c9da244d695c6ddf34e2ebb733efd4ed8aa9
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 PKG_LICENSE:=BSD-3-Clause

package/libs/libpcap/patches/001-Add-support-for-Realtek-Ethertype-DSA-data.patch

@@ -1,28 +0,0 @@
-From fcb2cbc3a306afcf7785a60a74dbea431e609d76 Mon Sep 17 00:00:00 2001
-From: Luiz Angelo Daros de Luca <luizluca@gmail.com>
-Date: Thu, 6 Jan 2022 15:51:54 -0300
-Subject: [PATCH 1/2] Add support for Realtek (Ethertype) DSA data
-
-Realtek switchtag rtl4a (4 bytes long, protocol 0xA) and rtl8_4 (8 bytes
-long, protocol 0x04) are Ethertype DSA tags, inserted in the Ethernet
-header similar to an 802.1Q tag. Both shares the same Ethertype 0x8899
-as other Realtek proprietary protocols.
-
-Realtek switchtag rtl8_4t is identical to rtl8_4 but positioned before
-the CRC, at the end of the Ethernet frame.
----
- pcap-linux.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/pcap-linux.c
-+++ b/pcap-linux.c
-@@ -5281,6 +5281,9 @@ static struct dsa_proto {
- 	{ "brcm-prepend", DLT_DSA_TAG_BRCM_PREPEND },
- 	{ "dsa", DLT_DSA_TAG_DSA },
- 	{ "edsa", DLT_DSA_TAG_EDSA },
-+	{ "rtl4a", DLT_EN10MB },
-+	{ "rtl8_4", DLT_EN10MB },
-+	{ "rtl8_4t", DLT_EN10MB },
- };
- 
- static int

package/libs/libpcap/patches/002-Linux-handle-other-DSA-tags.patch

@@ -1,322 +0,0 @@
-From 7d298976beff0cce310fb53a430f82b53f43a394 Mon Sep 17 00:00:00 2001
-From: Guy Harris <gharris@sonic.net>
-Date: Fri, 14 Feb 2025 19:12:24 -0800
-Subject: [PATCH 2/2] Linux: handle other DSA tags.
-
-Many of those entries need their own LINKTYPE_/DLT_? values, including
-tcpdump and Wireshark support for same, but at least this lets you see
-raw hex data from a capture.
-
-Fixes #1367.
-
-Supercedes #1451.
----
- pcap-linux.c | 284 ++++++++++++++++++++++++++++++++++++++++++++++++++-
- 1 file changed, 280 insertions(+), 4 deletions(-)
-
---- a/pcap-linux.c
-+++ b/pcap-linux.c
-@@ -5267,23 +5267,299 @@ iface_get_offload(pcap_t *handle _U_)
- }
- #endif /* SIOCETHTOOL */
- 
-+/*
-+ * As per
-+ *
-+ *    https://www.kernel.org/doc/html/latest/networking/dsa/dsa.html#switch-tagging-protocols
-+ *
-+ * Type 1 means that the tag is prepended to the Ethernet packet.
-+ * LINKTYPE_ETHERNET/DLT_EN10MB doesn't work, as it would try to
-+ * dissect the tag data as the Ethernet header.  These should get
-+ * their own LINKTYPE_DLT_ values.
-+ *
-+ * Type 2 means that the tag is inserted into the Ethernet header
-+ * after the source address and before the type/length field.
-+ *
-+ * Type 3 means that tag is a packet trailer.  LINKTYPE_ETHERNET/DLT_EN10MB
-+ * works,  unless the next-layer protocol has no length field of its own,
-+ * so that the tag might be treated as part of the payload. These should
-+ * get their own LINKTYPE_/DLT_ values.
-+ *
-+ * If you get an "unsupported DSA tag" error, please add the tag to here,
-+ * complete with a full comment indicating whether it's type 1, 2, or 3,
-+ * and, for type 2, indicating whether it has an Ethertype and, if so
-+ * what that type is, and whether it's registered with the IEEE or is
-+ * self-assigned. Also, point to *something* that indicates the format
-+ * of the tag.
-+ */
- static struct dsa_proto {
- 	const char *name;
- 	bpf_u_int32 linktype;
- } dsa_protos[] = {
- 	/*
--	 * None is special and indicates that the interface does not have
--	 * any tagging protocol configured, and is therefore a standard
--	 * Ethernet interface.
-+	 * Type 1. See
-+	 *
-+	 *    https://elixir.bootlin.com/linux/v6.13.2/source/net/dsa/tag_ar9331.c
-+	 */
-+	{ "ar9331", DLT_EN10MB },
-+
-+	/*
-+	 * Type 2, without an Ethertype at the beginning,
-+	 * assigned a LINKTYPE_/DLT_ value.
- 	 */
--	{ "none", DLT_EN10MB },
- 	{ "brcm", DLT_DSA_TAG_BRCM },
-+
-+	/*
-+	 * Type 2, with Ethertype 0x8874, assigned to Broadcom.
-+	 *
-+	 * This doies not require a LINKTYPE_/DLT_ value, it
-+	 * just requires that Ethertype 0x8874 be dissected
-+	 * properly.
-+	 */
-+	{ "brcm-legacy", DLT_EN10MB },
-+
-+	/*
-+	 * Type 1.
-+	 */
- 	{ "brcm-prepend", DLT_DSA_TAG_BRCM_PREPEND },
-+
-+	/*
-+	 * Type 2, without an Etherype at he beginning,
-+	 * assigned a LINKTYPE_/DLT_ value.
-+	 */
- 	{ "dsa", DLT_DSA_TAG_DSA },
-+
-+	/*
-+	 * Type 2, with an Ethertype field, but without
-+	 * an assigned Ethertype value that can be relied
-+	 * on; assigned a LINKTYPE_/DLT_ value.
-+	 */
- 	{ "edsa", DLT_DSA_TAG_EDSA },
-+
-+	/*
-+	 * Type 1, with different transmit and receive headers,
-+	 * so can't really be handled well with the current
-+	 * libpcap API and with pcap files.  Use DLT_LINUX_SLL,
-+	 * to get the direction?
-+	 *
-+	 * See
-+	 *
-+	 *    https://elixir.bootlin.com/linux/v6.13.2/source/net/dsa/tag_gswip.c
-+	 */
-+	{ "gswip", DLT_EN10MB },
-+
-+	/*
-+	 * Type 3. See
-+	 *
-+	 *    https://elixir.bootlin.com/linux/v6.13.2/source/net/dsa/tag_hellcreek.c
-+	 */
-+	{ "hellcreek", DLT_EN10MB },
-+
-+	/*
-+	 * Type 3, with different transmit and receive headers,
-+	 * so can't really be handled well with the current
-+	 * libpcap API and with pcap files.  Use DLT_LINUX_SLL,
-+	 * to get the direction?
-+	 *
-+	 * See
-+	 *
-+	 *    https://elixir.bootlin.com/linux/v6.13.2/source/net/dsa/tag_ksz.c#L102
-+	 */
-+	{ "ksz8795", DLT_EN10MB },
-+
-+	/*
-+	 * Type 3, with different transmit and receive headers,
-+	 * so can't really be handled well with the current
-+	 * libpcap API and with pcap files.  Use DLT_LINUX_SLL,
-+	 * to get the direction?
-+	 *
-+	 * See
-+	 *
-+	 *    https://elixir.bootlin.com/linux/v6.13.2/source/net/dsa/tag_ksz.c#L160
-+	 */
-+	{ "ksz9477", DLT_EN10MB },
-+
-+	/*
-+	 * Type 3, with different transmit and receive headers,
-+	 * so can't really be handled well with the current
-+	 * libpcap API and with pcap files.  Use DLT_LINUX_SLL,
-+	 * to get the direction?
-+	 *
-+	 * See
-+	 *
-+	 *    https://elixir.bootlin.com/linux/v6.13.2/source/net/dsa/tag_ksz.c#L341
-+	 */
-+	{ "ksz9893", DLT_EN10MB },
-+
-+	/*
-+	 * Type 3, with different transmit and receive headers,
-+	 * so can't really be handled well with the current
-+	 * libpcap API and with pcap files.  Use DLT_LINUX_SLL,
-+	 * to get the direction?
-+	 *
-+	 * See
-+	 *
-+	 *    https://elixir.bootlin.com/linux/v6.13.2/source/net/dsa/tag_ksz.c#L386
-+	 */
-+	{ "lan937x", DLT_EN10MB },
-+
-+	/*
-+	 * Type 2, with Ethertype 0x8100; the VID can be interpreted
-+	 * as per
-+	 *
-+	 *    https://elixir.bootlin.com/linux/v6.13.2/source/net/dsa/tag_lan9303.c#L24
-+	 *
-+	 * so giving its own LINKTYPE_/DLT_ value would allow a
-+	 * dissector to do so.
-+	 */
-+	{ "lan9303", DLT_EN10MB },
-+
-+	/*
-+	 * Type 2, without an Etherype at he beginning,
-+	 * should be assigned a LINKTYPE_/DLT_ value.
-+	 *
-+	 * See
-+	 *
-+	 *    https://elixir.bootlin.com/linux/v6.13.2/source/net/dsa/tag_mtk.c#L15
-+	 */
-+	{ "mtk", DLT_EN10MB },
-+
-+	/*
-+	 * None is special and indicates that the interface does not have
-+	 * any tagging protocol configured, and is therefore a standard
-+	 * Ethernet interface.
-+	 */
-+	{ "none", DLT_EN10MB },
-+
-+	/*
-+	 * Type 1.
-+	 *
-+	 * See
-+	 *
-+	 *    https://elixir.bootlin.com/linux/v6.13.2/source/net/dsa/tag_ocelot.c
-+	 */
-+	{ "ocelot", DLT_EN10MB },
-+
-+	/*
-+	 * Type 1.
-+	 *
-+	 * See
-+	 *
-+	 *    https://elixir.bootlin.com/linux/v6.13.2/source/net/dsa/tag_ocelot.c
-+	 */
-+	{ "seville", DLT_EN10MB },
-+
-+	/*
-+	 * Type 2, with Ethertype 0x8100; the VID can be interpreted
-+	 * as per
-+	 *
-+	 *    https://elixir.bootlin.com/linux/v6.13.2/source/net/dsa/tag_8021q.c#L15
-+	 *
-+	 * so giving its own LINKTYPE_/DLT_ value would allow a
-+	 * dissector to do so.
-+	 */
-+	{ "ocelot-8021q", DLT_EN10MB },
-+
-+	/*
-+	 * Type 2, without an Etherype at he beginning,
-+	 * should be assigned a LINKTYPE_/DLT_ value.
-+	 *
-+	 * See
-+	 *
-+	 *    https://elixir.bootlin.com/linux/v6.13.2/source/net/dsa/tag_qca.c
-+	 */
-+	{ "qca", DLT_EN10MB },
-+
-+	/*
-+	 * Type 2, with Ethertype 0x8899, assigned to Realtek;
-+	 * they use it for several on-the-Ethernet protocols
-+	 * as well, but there are fields that allow the two
-+	 * tag formats, and all the protocols in question,
-+	 * to be distinguiished from one another.
-+	 *
-+	 * This doies not require a LINKTYPE_/DLT_ value, it
-+	 * just requires that Ethertype 0x8899 be dissected
-+	 * properly.
-+	 *
-+	 * See
-+	 *
-+	 *    https://elixir.bootlin.com/linux/v6.13.2/source/net/dsa/tag_rtl4_a.c
-+	 *
-+	 *    http://realtek.info/pdf/rtl8306sd%28m%29_datasheet_1.1.pdf
-+	 *
-+	 * and various pages in tcpdump's print-realtek.c and Wireshark's
-+	 * epan/dissectors/packet-realtek.c for the other protocols.
-+	 */
- 	{ "rtl4a", DLT_EN10MB },
-+
-+	/*
-+	 * Type 2, with Ethertype 0x8899, assigned to Realtek;
-+	 * see above.
-+	 */
- 	{ "rtl8_4", DLT_EN10MB },
-+
-+	/*
-+	 * Type 3, with the same tag format as rtl8_4.
-+	 */
- 	{ "rtl8_4t", DLT_EN10MB },
-+
-+	/*
-+	 * Type 2, with Ethertype 0xe001; that's probably
-+	 * self-assigned, so this really should ahve its
-+	 * own LINKTYPE_/DLT_ value.
-+	 *
-+	 * See
-+	 *
-+	 *    https://elixir.bootlin.com/linux/v6.13.2/source/net/dsa/tag_rzn1_a5psw.c
-+	 */
-+	{ "a5psw", DLT_EN10MB },
-+
-+	/*
-+	 * Type 2, with Ethertype 0x8100 or the self-assigned
-+	 * 0xdadb, so this really should ahve its own
-+	 * LINKTYPE_/DLT_ value; that would also allow the
-+	 * VID of the tag to be dissected as per
-+	 *
-+	 *    https://elixir.bootlin.com/linux/v6.13.2/source/net/dsa/tag_8021q.c#L15
-+	 */
-+	{ "sja1105", DLT_EN10MB },
-+
-+	/*
-+	 * Type "none of the above", with both a header and trailer,
-+	 * with different transmit and receive tags.  Has
-+	 * Ethertype 0xdadc, which is probably self-assigned.
-+	 * This should really have its own LINKTYPE_/DLT_ value.
-+	 */
-+	{ "sja1110", DLT_EN10MB },
-+
-+	/*
-+	 * Type 3, as the name suggests.
-+	 *
-+	 * See
-+	 *
-+	 *    https://elixir.bootlin.com/linux/v6.13.2/source/net/dsa/tag_trailer.c
-+	 */
-+	{ "trailer", DLT_EN10MB },
-+
-+	/*
-+	 * Type 2, with Ethertype 0x8100; the VID can be interpreted
-+	 * as per
-+	 *
-+	 *    https://elixir.bootlin.com/linux/v6.13.2/source/net/dsa/tag_8021q.c#L15
-+	 *
-+	 * so giving its own LINKTYPE_/DLT_ value would allow a
-+	 * dissector to do so.
-+	 */
-+	{ "vsc73xx-8021q", DLT_EN10MB },
-+
-+	/*
-+	 * Type 3.
-+	 *
-+	 * See
-+	 *
-+	 *    https://elixir.bootlin.com/linux/v6.13.2/source/net/dsa/tag_xrs700x.c
-+	 */
-+	{ "xrs700x", DLT_EN10MB },
- };
- 
- static int

package/libs/libpcap/patches/100-no-openssl.patch

@@ -1,6 +1,6 @@
 --- a/CMakeLists.txt
 +++ b/CMakeLists.txt
-@@ -1441,7 +1441,6 @@ if(ENABLE_REMOTE)
+@@ -1470,7 +1470,6 @@ if(ENABLE_REMOTE)
    #
    # OpenSSL/libressl.
    #

package/libs/libpcap/patches/102-skip-manpages.patch

@@ -9,7 +9,7 @@ Subject: [PATCH] skip manpages
 
 --- a/CMakeLists.txt
 +++ b/CMakeLists.txt
-@@ -3548,57 +3548,6 @@ if(NOT MSVC)
+@@ -3575,57 +3575,6 @@ if(NOT MSVC)
      if(MINGW)
          find_program(LINK_EXECUTABLE ln)
      endif(MINGW)

package/libs/libpcap/patches/300-Add-support-for-B.A.T.M.A.N.-Advanced.patch

@@ -220,7 +220,7 @@ Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
  #endif
 --- a/gencode.c
 +++ b/gencode.c
-@@ -58,6 +58,8 @@
+@@ -51,6 +51,8 @@
  #include "sunatmpos.h"
  #include "pflog.h"
  #include "ppp.h"
@@ -229,7 +229,7 @@ Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
  #include "pcap/sll.h"
  #include "pcap/ipnet.h"
  #include "arcnet.h"
-@@ -9704,6 +9706,168 @@ gen_geneve(compiler_state_t *cstate, bpf
+@@ -9846,6 +9848,168 @@ gen_geneve(compiler_state_t *cstate, bpf
  	return b1;
  }
  
@@ -412,7 +412,7 @@ Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
  struct block *gen_atmtype_abbrev(compiler_state_t *, int);
 --- a/grammar.y.in
 +++ b/grammar.y.in
-@@ -383,6 +383,7 @@ DIAG_OFF_BISON_BYACC
+@@ -370,6 +370,7 @@ DIAG_OFF_BISON_BYACC
  %type	<i>	mtp2type
  %type	<blk>	mtp3field
  %type	<blk>	mtp3fieldvalue mtp3value mtp3listvalue
@@ -420,7 +420,7 @@ Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
  
  
  %token  DST SRC HOST GATEWAY
-@@ -401,7 +402,7 @@ DIAG_OFF_BISON_BYACC
+@@ -388,7 +389,7 @@ DIAG_OFF_BISON_BYACC
  %token  LEN
  %token  IPV6 ICMPV6 AH ESP
  %token	VLAN MPLS
@@ -429,7 +429,7 @@ Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
  %token  ISO ESIS CLNP ISIS L1 L2 IIH LSP SNP CSNP PSNP
  %token  STP
  %token  IPX
-@@ -698,11 +699,40 @@ other:	  pqual TK_BROADCAST	{ CHECK_PTR_
+@@ -685,11 +686,40 @@ other:	  pqual TK_BROADCAST	{ CHECK_PTR_
  	| PPPOES		{ CHECK_PTR_VAL(($$ = gen_pppoes(cstate, 0, 0))); }
  	| GENEVE pnum		{ CHECK_PTR_VAL(($$ = gen_geneve(cstate, $2, 1))); }
  	| GENEVE		{ CHECK_PTR_VAL(($$ = gen_geneve(cstate, 0, 0))); }
@@ -472,7 +472,7 @@ Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
  	| PF_RNR NUM		{ CHECK_PTR_VAL(($$ = gen_pf_rnr(cstate, $2))); }
 --- a/nametoaddr.c
 +++ b/nametoaddr.c
-@@ -134,8 +134,12 @@
+@@ -109,8 +109,12 @@
  
  #include "diag-control.h"
  
@@ -485,7 +485,7 @@ Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
  #include "nametoaddr.h"
  
  #include "thread-local.h"
-@@ -597,6 +601,7 @@ PCAP_API_DEF struct eproto eproto_db[] =
+@@ -572,6 +576,7 @@ PCAP_API_DEF struct eproto eproto_db[] =
  	{ "moprc", ETHERTYPE_MOPRC },
  	{ "rarp", ETHERTYPE_REVARP },
  	{ "sca", ETHERTYPE_SCA },
@@ -493,7 +493,7 @@ Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
  	{ (char *)0, 0 }
  };
  
-@@ -631,6 +636,60 @@ pcap_nametollc(const char *s)
+@@ -606,6 +611,60 @@ pcap_nametollc(const char *s)
  
  	while (p->s != 0) {
  		if (strcmp(p->s, s) == 0)
@@ -632,7 +632,7 @@ Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
   * If a protocol is unknown, PROTO_UNDEF is returned.
 --- a/scanner.l
 +++ b/scanner.l
-@@ -365,6 +365,7 @@ mpls		return MPLS;
+@@ -343,6 +343,7 @@ mpls		return MPLS;
  pppoed		return PPPOED;
  pppoes		return PPPOES;
  geneve		return GENEVE;

package/libs/libubox/Makefile

@@ -5,9 +5,9 @@ PKG_RELEASE=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/libubox.git
-PKG_MIRROR_HASH:=59cebd566db9013497e2094011f37eef9dcf5b3399b81be3e7c5217d646b82ee
-PKG_SOURCE_DATE:=2025-12-08
-PKG_SOURCE_VERSION:=7928f1711703767b0ac5ce916c7231d0e1af1ca2
+PKG_MIRROR_HASH:=fb43a86d13bbbf16d47358caa2fe7eec3b802e3a57ba5142520add159469c927
+PKG_SOURCE_DATE:=2026-02-13
+PKG_SOURCE_VERSION:=1aa36ee774c8db4d7a396903e0d2e1fb79ee8bf1
 PKG_ABI_VERSION:=$(call abi_version_str,$(PKG_SOURCE_DATE))
 CMAKE_INSTALL:=1
 

package/libs/openssl/Makefile

@@ -8,7 +8,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=openssl
-PKG_VERSION:=3.5.4
+PKG_VERSION:=3.5.5
 PKG_RELEASE:=1
 PKG_BUILD_FLAGS:=no-mips16 gc-sections no-lto
 
@@ -21,7 +21,7 @@ PKG_SOURCE_URL:= \
 	https://www.openssl.org/source/old/$(PKG_BASE)/ \
 	https://github.com/openssl/openssl/releases/download/$(PKG_NAME)-$(PKG_VERSION)/
 
-PKG_HASH:=967311f84955316969bdb1d8d4b983718ef42338639c621ec4c34fddef355e99
+PKG_HASH:=b28c91532a8b65a1f983b4c28b7488174e4a01008e29ce8e69bd789f28bc2a89
 
 PKG_LICENSE:=Apache-2.0
 PKG_LICENSE_FILES:=LICENSE.txt

package/libs/openssl/patches/010-fix-aes-gcm-siv-cipher.patch

@@ -43,7 +43,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 --- a/providers/implementations/ciphers/cipher_aes_siv.c
 +++ b/providers/implementations/ciphers/cipher_aes_siv.c
 @@ -114,6 +114,7 @@ static int siv_cipher(void *vctx, unsign
-                       size_t outsize, const unsigned char *in, size_t inl)
+     size_t outsize, const unsigned char *in, size_t inl)
  {
      PROV_AES_SIV_CTX *ctx = (PROV_AES_SIV_CTX *)vctx;
 +    static const unsigned char empty;

package/libs/openssl/patches/140-allow-prefer-chacha20.patch

@@ -16,9 +16,9 @@ Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
 
 --- a/ssl/ssl_ciph.c
 +++ b/ssl/ssl_ciph.c
-@@ -1488,11 +1488,29 @@ STACK_OF(SSL_CIPHER) *ssl_create_cipher_
+@@ -1471,11 +1471,29 @@ STACK_OF(SSL_CIPHER) *ssl_create_cipher_
      ssl_cipher_apply_rule(0, SSL_kECDHE, 0, 0, 0, 0, 0, CIPHER_DEL, -1, &head,
-                           &tail);
+         &tail);
  
 +    /*
 +     * If OPENSSL_PREFER_CHACHA_OVER_GCM is defined, ChaCha20_Poly1305
@@ -33,20 +33,20 @@ Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
 +
 +#ifdef OPENSSL_PREFER_CHACHA_OVER_GCM
 +    ssl_cipher_apply_rule(0, 0, 0, SSL_CHACHA20, 0, 0, 0, CIPHER_ADD, -1,
-+                          &head, &tail);
++        &head, &tail);
 +    ssl_cipher_apply_rule(0, 0, 0, SSL_AESGCM, 0, 0, 0, CIPHER_ADD, -1,
-+                          &head, &tail);
++        &head, &tail);
 +#else
      /* Within each strength group, we prefer GCM over CHACHA... */
      ssl_cipher_apply_rule(0, 0, 0, SSL_AESGCM, 0, 0, 0, CIPHER_ADD, -1,
-                           &head, &tail);
+         &head, &tail);
      ssl_cipher_apply_rule(0, 0, 0, SSL_CHACHA20, 0, 0, 0, CIPHER_ADD, -1,
-                           &head, &tail);
+         &head, &tail);
 +#endif
  
      /*
       * ...and generally, our preferred cipher is AES.
-@@ -1547,7 +1565,7 @@ STACK_OF(SSL_CIPHER) *ssl_create_cipher_
+@@ -1530,7 +1548,7 @@ STACK_OF(SSL_CIPHER) *ssl_create_cipher_
       * Within each group, ciphers remain sorted by strength and previous
       * preference, i.e.,
       * 1) ECDHE > DHE
@@ -55,7 +55,7 @@ Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
       * 3) AES > rest
       * 4) TLS 1.2 > legacy
       *
-@@ -2246,7 +2264,13 @@ const char *OSSL_default_cipher_list(voi
+@@ -2232,7 +2250,13 @@ const char *OSSL_default_cipher_list(voi
   */
  const char *OSSL_default_ciphersuites(void)
  {
@@ -71,22 +71,22 @@ Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
  }
 --- a/include/openssl/ssl.h.in
 +++ b/include/openssl/ssl.h.in
-@@ -199,9 +199,15 @@ extern "C" {
+@@ -201,9 +201,15 @@ extern "C" {
   * DEPRECATED IN 3.0.0, in favor of OSSL_default_ciphersuites()
   * Update both macro and function simultaneously
   */
--#  define TLS_DEFAULT_CIPHERSUITES "TLS_AES_256_GCM_SHA384:" \
--                                   "TLS_CHACHA20_POLY1305_SHA256:" \
--                                   "TLS_AES_128_GCM_SHA256"
-+#  ifdef OPENSSL_PREFER_CHACHA_OVER_GCM
-+#   define TLS_DEFAULT_CIPHERSUITES "TLS_CHACHA20_POLY1305_SHA256:" \
-+                                    "TLS_AES_256_GCM_SHA384:" \
-+                                    "TLS_AES_128_GCM_SHA256"
-+#  else
-+#   define TLS_DEFAULT_CIPHERSUITES "TLS_AES_256_GCM_SHA384:" \
-+                                    "TLS_CHACHA20_POLY1305_SHA256:" \
-+                                    "TLS_AES_128_GCM_SHA256"
-+#  endif
- # endif
+-#define TLS_DEFAULT_CIPHERSUITES "TLS_AES_256_GCM_SHA384:"       \
+-                                 "TLS_CHACHA20_POLY1305_SHA256:" \
+-                                 "TLS_AES_128_GCM_SHA256"
++#ifdef OPENSSL_PREFER_CHACHA_OVER_GCM
++    #define TLS_DEFAULT_CIPHERSUITES "TLS_CHACHA20_POLY1305_SHA256:" \
++                                     "TLS_AES_256_GCM_SHA384:"       \
++                                     "TLS_AES_128_GCM_SHA256"
++#else
++    #define TLS_DEFAULT_CIPHERSUITES "TLS_AES_256_GCM_SHA384:"       \
++                                     "TLS_CHACHA20_POLY1305_SHA256:" \
++                                     "TLS_AES_128_GCM_SHA256"
++#endif
+ #endif
  /*
   * As of OpenSSL 1.0.0, ssl_create_cipher_list() in ssl/ssl_ciph.c always

package/libs/openssl/patches/500-e_devcrypto-default-to-not-use-digests-in-engine.patch

@@ -21,21 +21,21 @@ Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
 
 --- a/engines/e_devcrypto.c
 +++ b/engines/e_devcrypto.c
-@@ -906,7 +906,7 @@ static void prepare_digest_methods(void)
+@@ -887,7 +887,7 @@ static void prepare_digest_methods(void)
      for (i = 0, known_digest_nids_amount = 0; i < OSSL_NELEM(digest_data);
-          i++) {
+         i++) {
  
 -        selected_digests[i] = 1;
 +        selected_digests[i] = 0;
  
          /*
           * Check that the digest is usable
-@@ -1120,7 +1120,7 @@ static const ENGINE_CMD_DEFN devcrypto_c
+@@ -1096,7 +1096,7 @@ static const ENGINE_CMD_DEFN devcrypto_c
  #ifdef IMPLEMENT_DIGEST
-    {DEVCRYPTO_CMD_DIGESTS,
-     "DIGESTS",
--    "either ALL, NONE, or a comma-separated list of digests to enable [default=ALL]",
-+    "either ALL, NONE, or a comma-separated list of digests to enable [default=NONE]",
-     ENGINE_CMD_FLAG_STRING},
+     { DEVCRYPTO_CMD_DIGESTS,
+         "DIGESTS",
+-        "either ALL, NONE, or a comma-separated list of digests to enable [default=ALL]",
++        "either ALL, NONE, or a comma-separated list of digests to enable [default=NONE]",
+         ENGINE_CMD_FLAG_STRING },
  #endif
  

package/libs/openssl/patches/510-e_devcrypto-ignore-error-when-closing-session.patch

@@ -10,12 +10,11 @@ Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
 
 --- a/engines/e_devcrypto.c
 +++ b/engines/e_devcrypto.c
-@@ -212,9 +212,8 @@ static int cipher_init(EVP_CIPHER_CTX *c
+@@ -211,8 +211,8 @@ static int cipher_init(EVP_CIPHER_CTX *c
      int ret;
  
      /* cleanup a previous session */
--    if (cipher_ctx->sess.ses != 0 &&
--        clean_devcrypto_session(&cipher_ctx->sess) == 0)
+-    if (cipher_ctx->sess.ses != 0 && clean_devcrypto_session(&cipher_ctx->sess) == 0)
 -        return 0;
 +    if (cipher_ctx->sess.ses != 0)
 +        clean_devcrypto_session(&cipher_ctx->sess);