hurricos/openwrt-mirror
1
0
Fork 0
mirror of git://git.openwrt.org/openwrt/openwrt.git synced 2025-11-03 22:44:27 -05:00
Code Issues Projects Releases Wiki Activity

brcm63xx: update bmips patches with upstream submission

Browse Source 
Update bmips cleanup patches with upstream submission and backport a few
bmips fixes.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39267
This commit is contained in:
Jonas Gorski 2014-01-13 12:13:05 +00:00
parent d9a20b6f46
commit d8ac24b325
23 changed files with 683 additions and 268 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
target/linux/brcm63xx/config-3.10
View File

@ -37,13 +37,13 @@ CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=t
CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE_BOOL=y
# CONFIG_CMDLINE_OVERRIDE is not set # CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_CPU_BIG_ENDIAN=y CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_BMIPS is not set CONFIG_CPU_BMIPS=y
CONFIG_CPU_BMIPS32_3300=y
CONFIG_CPU_BMIPS4350=y
CONFIG_CPU_GENERIC_DUMP_TLB=y CONFIG_CPU_GENERIC_DUMP_TLB=y
CONFIG_CPU_HAS_PREFETCH=y CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_MIPS32=y CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPS32_R1=y
CONFIG_CPU_MIPSR1=y
CONFIG_CPU_R4K_CACHE_TLB=y CONFIG_CPU_R4K_CACHE_TLB=y
CONFIG_CPU_R4K_FPU=y CONFIG_CPU_R4K_FPU=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
@ -65,7 +65,6 @@ CONFIG_GPIO_74X164=y
CONFIG_GPIO_DEVRES=y CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_SYSFS=y CONFIG_GPIO_SYSFS=y
# CONFIG_HAMRADIO is not set # CONFIG_HAMRADIO is not set
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y CONFIG_HAS_IOPORT=y
@ -172,17 +171,19 @@ CONFIG_SSB_SPROM=y
CONFIG_SWAP_IO_SPACE=y CONFIG_SWAP_IO_SPACE=y
CONFIG_SWCONFIG=y CONFIG_SWCONFIG=y
CONFIG_SYS_HAS_CPU_BMIPS=y CONFIG_SYS_HAS_CPU_BMIPS=y
CONFIG_SYS_HAS_CPU_BMIPS3300=y CONFIG_SYS_HAS_CPU_BMIPS32_3300=y
CONFIG_SYS_HAS_CPU_BMIPS4350=y CONFIG_SYS_HAS_CPU_BMIPS4350=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_EARLY_PRINTK=y CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y
CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_TICK_CPU_ACCOUNTING=y CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_UIDGID_CONVERTED=y CONFIG_UIDGID_CONVERTED=y
CONFIG_USB_ARCH_HAS_XHCI=y CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y CONFIG_USB_SUPPORT=y
CONFIG_VM_EVENT_COUNTERS=y CONFIG_VM_EVENT_COUNTERS=y
CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_WEAK_ORDERING=y
CONFIG_ZONE_DMA_FLAG=0 CONFIG_ZONE_DMA_FLAG=0

37
target/linux/brcm63xx/patches-3.10/056-MIPS-BMIPS-Fix-thinko-to-release-slave-TP-from-reset.patch Normal file
View File

@ -0,0 +1,37 @@
From 976f39b139cdd06a88a5aadd8202b0c30cac9cda Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Wed, 17 Jul 2013 17:56:31 +0000
Subject: [PATCH] MIPS: BMIPS: Fix thinko to release slave TP from reset
Commit 4df715aa ["MIPS: BMIPS: support booting from physical CPU other
than 0"] introduced a thinko which will prevents slave CPUs from being
released from reset on systems where we boot from TP0. The problem is
that we are checking whether the slave CPU logical CPU map is 0, which
is never true for systems booting from TP0, so we do not release the
slave TP from reset and we are just stuck. Fix this by properly checking
that the CPU we intend to boot really is the physical slave CPU (logical
and physical value being 1).
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: blogic@openwrt.org
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Cc: Florian Fainelli <florian@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/5598/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/kernel/smp-bmips.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/kernel/smp-bmips.c
+++ b/arch/mips/kernel/smp-bmips.c
@@ -173,7 +173,7 @@ static void bmips_boot_secondary(int cpu
else {
#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
/* Reset slave TP1 if booting from TP0 */
- if (cpu_logical_map(cpu) == 0)
+ if (cpu_logical_map(cpu) == 1)
set_c0_brcm_cmt_ctrl(0x01);
#elif defined(CONFIG_CPU_BMIPS5000)
if (cpu & 0x01)

41
target/linux/brcm63xx/patches-3.10/057-MIPS-BMIPS-do-not-change-interrupt-routing-depending.patch Normal file
View File

@ -0,0 +1,41 @@
From c4091d3fbbed922a3641e5e749655e49cc0d4dee Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Wed, 24 Jul 2013 17:12:10 +0100
Subject: [PATCH] MIPS: BMIPS: do not change interrupt routing depending on
boot CPU
Commit 4df715aa ("MIPS: BMIPS: support booting from physical CPU other
than 0") changed the interupt routing when we are booting from physical
CPU 0, but the settings are actually correct if we are booting from
physical CPU 0 or CPU 1. Revert that specific change.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Cc: blogic@openwrt.org
Patchwork: https://patchwork.linux-mips.org/patch/5622/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/kernel/smp-bmips.c | 8 +-------
1 file changed, 1 insertion(+), 7 deletions(-)
--- a/arch/mips/kernel/smp-bmips.c
+++ b/arch/mips/kernel/smp-bmips.c
@@ -79,15 +79,9 @@ static void __init bmips_smp_setup(void)
* MIPS interrupts 0,1 (SW INT 0,1) cross over to the other thread
* MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output
* MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output
- *
- * If booting from TP1, leave the existing CMT interrupt routing
- * such that TP0 responds to SW1 and TP1 responds to SW0.
*/
- if (boot_cpu == 0)
- change_c0_brcm_cmt_intr(0xf8018000,
+ change_c0_brcm_cmt_intr(0xf8018000,
(0x02 << 27) | (0x03 << 15));
- else
- change_c0_brcm_cmt_intr(0xf8018000, (0x1d << 27));
/* single core, 2 threads (2 pipelines) */
max_cpus = 2;

58
target/linux/brcm63xx/patches-3.10/058-MIPS-BMIPS-fix-slave-CPU-booting-when-physical-CPU-i.patch Normal file
View File

@ -0,0 +1,58 @@
From ff5fadaff39180dc0b652753b5614a564711be29 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Wed, 24 Jul 2013 17:12:11 +0100
Subject: [PATCH] MIPS: BMIPS: fix slave CPU booting when physical CPU is not 0
The current BMIPS SMP code assumes that the slave CPU is physical and
logical CPU 1, but on some systems such as BCM3368, the slave CPU is
physical CPU0. Fix the code to read the physical CPU (thread ID) we are
running this code on, and adjust the relocation vector address based on
it. This allows bringing up the second CPU on BCM3368 for instance.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Cc: blogic@openwrt.org
Patchwork: https://patchwork.linux-mips.org/patch/5621/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/kernel/bmips_vec.S | 6 +++++-
arch/mips/kernel/smp-bmips.c | 10 ++++++++--
2 files changed, 13 insertions(+), 3 deletions(-)
--- a/arch/mips/kernel/bmips_vec.S
+++ b/arch/mips/kernel/bmips_vec.S
@@ -56,7 +56,11 @@ LEAF(bmips_smp_movevec)
/* set up CPU1 CBR; move BASE to 0xa000_0000 */
li k0, 0xff400000
mtc0 k0, $22, 6
- li k1, CKSEG1 | BMIPS_RELO_VECTOR_CONTROL_1
+ /* set up relocation vector address based on thread ID */
+ mfc0 k1, $22, 3
+ srl k1, 16
+ andi k1, 0x8000
+ or k1, CKSEG1 | BMIPS_RELO_VECTOR_CONTROL_0
or k0, k1
li k1, 0xa0080000
sw k1, 0(k0)
--- a/arch/mips/kernel/smp-bmips.c
+++ b/arch/mips/kernel/smp-bmips.c
@@ -196,9 +196,15 @@ static void bmips_init_secondary(void)
#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
void __iomem *cbr = BMIPS_GET_CBR();
unsigned long old_vec;
+ unsigned long relo_vector;
+ int boot_cpu;
- old_vec = __raw_readl(cbr + BMIPS_RELO_VECTOR_CONTROL_1);
- __raw_writel(old_vec & ~0x20000000, cbr + BMIPS_RELO_VECTOR_CONTROL_1);
+ boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
+ relo_vector = boot_cpu ? BMIPS_RELO_VECTOR_CONTROL_0 :
+ BMIPS_RELO_VECTOR_CONTROL_1;
+
+ old_vec = __raw_readl(cbr + relo_vector);
+ __raw_writel(old_vec & ~0x20000000, cbr + relo_vector);
clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0);
#elif defined(CONFIG_CPU_BMIPS5000)

48
target/linux/brcm63xx/patches-3.10/059-MIPS-BMIPS-fix-hardware-interrupt-routing-for-boot-C.patch Normal file
View File

@ -0,0 +1,48 @@
From fcfa66de8a2f0631a65a2cec0f6149dafd36ec81 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Mon, 5 Aug 2013 11:50:25 +0100
Subject: [PATCH] MIPS: BMIPS: fix hardware interrupt routing for boot CPU != 0
The hardware interrupt routing for boot CPU != 0 is wrong because it
will route all the hardware interrupts to TP0 which is not the one we
booted from. Fix this by properly checking which boot CPU we are booting
from and updating the right interrupt mask for the boot CPU. This fixes
booting on BCM3368 with bmips_smp_emabled = 0.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: blogic@openwrt.org
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Patchwork: https://patchwork.linux-mips.org/patch/5650/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/kernel/smp-bmips.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/arch/mips/kernel/smp-bmips.c
+++ b/arch/mips/kernel/smp-bmips.c
@@ -66,6 +66,8 @@ static void __init bmips_smp_setup(void)
int i, cpu = 1, boot_cpu = 0;
#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
+ int cpu_hw_intr;
+
/* arbitration priority */
clear_c0_brcm_cmt_ctrl(0x30);
@@ -80,8 +82,12 @@ static void __init bmips_smp_setup(void)
* MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output
* MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output
*/
- change_c0_brcm_cmt_intr(0xf8018000,
- (0x02 << 27) | (0x03 << 15));
+ if (boot_cpu == 0)
+ cpu_hw_intr = 0x02;
+ else
+ cpu_hw_intr = 0x1d;
+
+ change_c0_brcm_cmt_intr(0xf8018000, (cpu_hw_intr << 27) | (0x03 << 15));
/* single core, 2 threads (2 pipelines) */
max_cpus = 2;

8
target/linux/brcm63xx/patches-3.10/109-MIPS-BCM63XX-disable-SMP-also-on-BCM3368.patch → target/linux/brcm63xx/patches-3.10/060-MIPS-BCM63XX-disable-SMP-also-on-BCM3368.patch
View File

@ -1,20 +1,20 @@
From 32d4b03c0aedb96022e86a67a560f6eaf488200a Mon Sep 17 00:00:00 2001 From 8bd8f46cbc709974b26396aa440133db4484015e Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org> From: Jonas Gorski <jogo@openwrt.org>
Date: Fri, 28 Jun 2013 00:25:13 +0200 Date: Fri, 28 Jun 2013 00:25:13 +0200
Subject: [PATCH 10/10] MIPS: BCM63XX: disable SMP also on BCM3368 Subject: [PATCH V2 01/13] MIPS: BCM63XX: disable SMP also on BCM3368
BCM3368 has the same shared TLB as BCM6358. BCM3368 has the same shared TLB as BCM6358.
Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Jonas Gorski <jogo@openwrt.org>
--- ---
arch/mips/bcm63xx/prom.c | 8 ++++---- arch/mips/bcm63xx/prom.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-) 1 file changed, 4 insertions(+), 4 deletions(-)
--- a/arch/mips/bcm63xx/prom.c --- a/arch/mips/bcm63xx/prom.c
+++ b/arch/mips/bcm63xx/prom.c +++ b/arch/mips/bcm63xx/prom.c
@@ -64,9 +64,9 @@ void __init prom_init(void) @@ -64,9 +64,9 @@ void __init prom_init(void)
register_smp_ops(&bmips_smp_ops);
if (cpu_is_bmips4350()) {
/* /*
- * BCM6328 might not have its second CPU enabled, while BCM6358 - * BCM6328 might not have its second CPU enabled, while BCM6358
- * needs special handling for its shared TLB, so disable SMP - * needs special handling for its shared TLB, so disable SMP

6
target/linux/brcm63xx/patches-3.10/101-MIPS-allow-asm-cpu.h-to-be-included-from-assembly.patch → target/linux/brcm63xx/patches-3.10/061-MIPS-allow-asm-cpu.h-to-be-included-from-assembly.patch
View File

@ -1,13 +1,13 @@
From 520f4bf75026cc60ba47946331966fb670b39cb0 Mon Sep 17 00:00:00 2001 From 72a1c3ad0392d7b42bf50e6ecade63a775166c73 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org> From: Jonas Gorski <jogo@openwrt.org>
Date: Thu, 27 Jun 2013 21:32:41 +0200 Date: Thu, 27 Jun 2013 21:32:41 +0200
Subject: [PATCH 02/10] MIPS: allow asm/cpu.h to be included from assembly Subject: [PATCH V2 02/13] MIPS: allow asm/cpu.h to be included from assembly
Add guards around the enum to allow including cpu.h from assembly. Add guards around the enum to allow including cpu.h from assembly.
Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Jonas Gorski <jogo@openwrt.org>
--- ---
arch/mips/include/asm/cpu.h | 3 +++ arch/mips/include/asm/cpu.h | 3 +++
1 file changed, 3 insertions(+) 1 file changed, 3 insertions(+)
--- a/arch/mips/include/asm/cpu.h --- a/arch/mips/include/asm/cpu.h

304
target/linux/brcm63xx/patches-3.10/103-MIPS-bmips-change-compile-time-checks-to-runtime-che.patch → target/linux/brcm63xx/patches-3.10/062-MIPS-BMIPS-change-compile-time-checks-to-runtime-che.patch
View File

@ -1,19 +1,52 @@
From 12594762fcbec024cb424c9b77efb28402651667 Mon Sep 17 00:00:00 2001 From 7d790bd6cab314462a29ba194e243b8b1d529524 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org> From: Jonas Gorski <jogo@openwrt.org>
Date: Thu, 27 Jun 2013 21:33:56 +0200 Date: Thu, 27 Jun 2013 21:33:56 +0200
Subject: [PATCH 04/10] MIPS: bmips: change compile time checks to runtime Subject: [PATCH V2 03/13] MIPS: BMIPS: change compile time checks to runtime
checks checks
Allow building for all bmips cpus at the same time by changing ifdefs Allow building for all bmips cpus at the same time by changing ifdefs
to checks for the cpu type, or adding appropriate checks to the to checks for the cpu type, or adding appropriate checks to the
assembly. assembly.
Since BMIPS43XX and BMIPS5000 require different IPI implementations,
split the SMP ops into one for each, so the runtime overhead is only
at registration time for them.
Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Jonas Gorski <jogo@openwrt.org>
--- ---
arch/mips/kernel/bmips_vec.S | 55 +++++++--- V1 -> V2:
arch/mips/kernel/smp-bmips.c | 241 ++++++++++++++++++++++-------------------- * use switch (cpu_type()) instead of if () else if () ...
2 files changed, 172 insertions(+), 124 deletions(-) * split the smp ops into bmips43xx and bmips5000
arch/mips/bcm63xx/prom.c | 2 +-
arch/mips/include/asm/bmips.h | 3 +-
arch/mips/kernel/bmips_vec.S | 55 ++++++--
arch/mips/kernel/smp-bmips.c | 312 +++++++++++++++++++++++++-----------------
4 files changed, 235 insertions(+), 137 deletions(-)
--- a/arch/mips/bcm63xx/prom.c
+++ b/arch/mips/bcm63xx/prom.c
@@ -61,7 +61,7 @@ void __init prom_init(void)
if (IS_ENABLED(CONFIG_CPU_BMIPS4350) && IS_ENABLED(CONFIG_SMP)) {
/* set up SMP */
- register_smp_ops(&bmips_smp_ops);
+ register_smp_ops(&bmips43xx_smp_ops);
/*
* BCM6328 might not have its second CPU enabled, while BCM3368
--- a/arch/mips/include/asm/bmips.h
+++ b/arch/mips/include/asm/bmips.h
@@ -47,7 +47,8 @@
#include <linux/cpumask.h>
#include <asm/r4kcache.h>
-extern struct plat_smp_ops bmips_smp_ops;
+extern struct plat_smp_ops bmips43xx_smp_ops;
+extern struct plat_smp_ops bmips5000_smp_ops;
extern char bmips_reset_nmi_vec;
extern char bmips_reset_nmi_vec_end;
extern char bmips_smp_movevec;
--- a/arch/mips/kernel/bmips_vec.S --- a/arch/mips/kernel/bmips_vec.S
+++ b/arch/mips/kernel/bmips_vec.S +++ b/arch/mips/kernel/bmips_vec.S
@@ -13,6 +13,7 @@ @@ -13,6 +13,7 @@
@ -24,7 +57,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
#include <asm/regdef.h> #include <asm/regdef.h>
#include <asm/mipsregs.h> #include <asm/mipsregs.h>
#include <asm/stackframe.h> #include <asm/stackframe.h>
@@ -89,12 +90,18 @@ NESTED(bmips_reset_nmi_vec, PT_SIZE, sp) @@ -93,12 +94,18 @@ NESTED(bmips_reset_nmi_vec, PT_SIZE, sp)
beqz k0, bmips_smp_entry beqz k0, bmips_smp_entry
#if defined(CONFIG_CPU_BMIPS5000) #if defined(CONFIG_CPU_BMIPS5000)
@ -44,7 +77,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
#endif /* CONFIG_SMP */ #endif /* CONFIG_SMP */
/* nope, it's just a regular NMI */ /* nope, it's just a regular NMI */
@@ -137,7 +144,12 @@ bmips_smp_entry: @@ -141,7 +148,12 @@ bmips_smp_entry:
xori k0, 0x04 xori k0, 0x04
mtc0 k0, CP0_CONFIG mtc0 k0, CP0_CONFIG
@ -57,7 +90,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
/* initialize CPU1's local I-cache */ /* initialize CPU1's local I-cache */
li k0, 0x80000000 li k0, 0x80000000
li k1, 0x80010000 li k1, 0x80010000
@@ -148,14 +160,21 @@ bmips_smp_entry: @@ -152,14 +164,21 @@ bmips_smp_entry:
1: cache Index_Store_Tag_I, 0(k0) 1: cache Index_Store_Tag_I, 0(k0)
addiu k0, 16 addiu k0, 16
bne k0, k1, 1b bne k0, k1, 1b
@ -82,7 +115,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
/* jump back to kseg0 in case we need to remap the kseg1 area */ /* jump back to kseg0 in case we need to remap the kseg1 area */
la k0, 1f la k0, 1f
jr k0 jr k0
@@ -221,8 +240,18 @@ END(bmips_smp_int_vec) @@ -225,8 +244,18 @@ END(bmips_smp_int_vec)
LEAF(bmips_enable_xks01) LEAF(bmips_enable_xks01)
#if defined(CONFIG_XKS01) #if defined(CONFIG_XKS01)
@ -102,7 +135,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
mfc0 t0, $22, 3 mfc0 t0, $22, 3
li t1, 0x1ff0 li t1, 0x1ff0
li t2, (1 << 12) | (1 << 9) li t2, (1 << 12) | (1 << 9)
@@ -231,7 +260,13 @@ LEAF(bmips_enable_xks01) @@ -235,7 +264,13 @@ LEAF(bmips_enable_xks01)
or t0, t2 or t0, t2
mtc0 t0, $22, 3 mtc0 t0, $22, 3
BARRIER BARRIER
@ -117,7 +150,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
mfc0 t0, $22, 5 mfc0 t0, $22, 5
li t1, 0x01ff li t1, 0x01ff
li t2, (1 << 8) | (1 << 5) li t2, (1 << 8) | (1 << 5)
@@ -240,12 +275,8 @@ LEAF(bmips_enable_xks01) @@ -244,12 +279,8 @@ LEAF(bmips_enable_xks01)
or t0, t2 or t0, t2
mtc0 t0, $22, 5 mtc0 t0, $22, 5
BARRIER BARRIER
@ -134,24 +167,27 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
jr ra jr ra
--- a/arch/mips/kernel/smp-bmips.c --- a/arch/mips/kernel/smp-bmips.c
+++ b/arch/mips/kernel/smp-bmips.c +++ b/arch/mips/kernel/smp-bmips.c
@@ -49,8 +49,11 @@ cpumask_t bmips_booted_mask; @@ -49,8 +49,10 @@ cpumask_t bmips_booted_mask;
unsigned long bmips_smp_boot_sp; unsigned long bmips_smp_boot_sp;
unsigned long bmips_smp_boot_gp; unsigned long bmips_smp_boot_gp;
-static void bmips_send_ipi_single(int cpu, unsigned int action);
-static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id);
+static void bmips43xx_send_ipi_single(int cpu, unsigned int action); +static void bmips43xx_send_ipi_single(int cpu, unsigned int action);
+static void bmips5000_send_ipi_single(int cpu, unsigned int action); +static void bmips5000_send_ipi_single(int cpu, unsigned int action);
static void bmips_send_ipi_single(int cpu, unsigned int action);
-static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id);
+static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id); +static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id);
+static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id); +static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id);
/* SW interrupts 0,1 are used for interprocessor signaling */ /* SW interrupts 0,1 are used for interprocessor signaling */
#define IPI0_IRQ (MIPS_CPU_IRQ_BASE + 0) #define IPI0_IRQ (MIPS_CPU_IRQ_BASE + 0)
@@ -65,48 +68,49 @@ static void __init bmips_smp_setup(void) @@ -64,49 +66,58 @@ static irqreturn_t bmips_ipi_interrupt(i
static void __init bmips_smp_setup(void)
{ {
int i, cpu = 1, boot_cpu = 0; int i, cpu = 1, boot_cpu = 0;
-
-#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380) -#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
int cpu_hw_intr;
- /* arbitration priority */ - /* arbitration priority */
- clear_c0_brcm_cmt_ctrl(0x30); - clear_c0_brcm_cmt_ctrl(0x30);
- -
@ -165,13 +201,28 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
- * MIPS interrupts 0,1 (SW INT 0,1) cross over to the other thread - * MIPS interrupts 0,1 (SW INT 0,1) cross over to the other thread
- * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output - * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output
- * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output - * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output
- *
- * If booting from TP1, leave the existing CMT interrupt routing
- * such that TP0 responds to SW1 and TP1 responds to SW0.
- */ - */
- if (boot_cpu == 0) - if (boot_cpu == 0)
- change_c0_brcm_cmt_intr(0xf8018000, - cpu_hw_intr = 0x02;
+ if (cpu_is_bmips4350() || cpu_is_bmips4380()) { - else
- cpu_hw_intr = 0x1d;
-
- change_c0_brcm_cmt_intr(0xf8018000, (cpu_hw_intr << 27) | (0x03 << 15));
-
- /* single core, 2 threads (2 pipelines) */
- max_cpus = 2;
-#elif defined(CONFIG_CPU_BMIPS5000)
- /* enable raceless SW interrupts */
- set_c0_brcm_config(0x03 << 22);
-
- /* route HW interrupt 0 to CPU0, HW interrupt 1 to CPU1 */
- change_c0_brcm_mode(0x1f << 27, 0x02 << 27);
-
- /* N cores, 2 threads per core */
- max_cpus = (((read_c0_brcm_config() >> 6) & 0x03) + 1) << 1;
+ switch (current_cpu_type()) {
+ case CPU_BMIPS4350:
+ case CPU_BMIPS4380:
+ /* arbitration priority */ + /* arbitration priority */
+ clear_c0_brcm_cmt_ctrl(0x30); + clear_c0_brcm_cmt_ctrl(0x30);
+ +
@ -186,37 +237,20 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+ * thread + * thread
+ * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output + * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output
+ * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output + * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output
+ *
+ * If booting from TP1, leave the existing CMT interrupt routing
+ * such that TP0 responds to SW1 and TP1 responds to SW0.
+ */ + */
+ if (boot_cpu == 0) + if (boot_cpu == 0)
+ change_c0_brcm_cmt_intr(0xf8018000, + cpu_hw_intr = 0x02;
(0x02 << 27) | (0x03 << 15));
- else
- change_c0_brcm_cmt_intr(0xf8018000, (0x1d << 27));
-
- /* single core, 2 threads (2 pipelines) */
- max_cpus = 2;
-#elif defined(CONFIG_CPU_BMIPS5000)
- /* enable raceless SW interrupts */
- set_c0_brcm_config(0x03 << 22);
-
- /* route HW interrupt 0 to CPU0, HW interrupt 1 to CPU1 */
- change_c0_brcm_mode(0x1f << 27, 0x02 << 27);
+ else + else
+ change_c0_brcm_cmt_intr(0xf8018000, (0x1d << 27)); + cpu_hw_intr = 0x1d;
+
- /* N cores, 2 threads per core */ + change_c0_brcm_cmt_intr(0xf8018000,
- max_cpus = (((read_c0_brcm_config() >> 6) & 0x03) + 1) << 1; + (cpu_hw_intr << 27) | (0x03 << 15));
- +
- /* clear any pending SW interrupts */
- for (i = 0; i < max_cpus; i++) {
- write_c0_brcm_action(ACTION_CLR_IPI(i, 0));
- write_c0_brcm_action(ACTION_CLR_IPI(i, 1));
+ /* single core, 2 threads (2 pipelines) */ + /* single core, 2 threads (2 pipelines) */
+ max_cpus = 2; + max_cpus = 2;
+ } else if (cpu_is_bmips5000()) { +
+ break;
+ case CPU_BMIPS5000:
+ /* enable raceless SW interrupts */ + /* enable raceless SW interrupts */
+ set_c0_brcm_config(0x03 << 22); + set_c0_brcm_config(0x03 << 22);
+ +
@ -231,38 +265,61 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+ write_c0_brcm_action(ACTION_CLR_IPI(i, 0)); + write_c0_brcm_action(ACTION_CLR_IPI(i, 0));
+ write_c0_brcm_action(ACTION_CLR_IPI(i, 1)); + write_c0_brcm_action(ACTION_CLR_IPI(i, 1));
+ } + }
- /* clear any pending SW interrupts */
- for (i = 0; i < max_cpus; i++) {
- write_c0_brcm_action(ACTION_CLR_IPI(i, 0));
- write_c0_brcm_action(ACTION_CLR_IPI(i, 1));
+ break;
+ default:
+ max_cpus = 1;
} }
-#endif -#endif
if (!bmips_smp_enabled) if (!bmips_smp_enabled)
max_cpus = 1; max_cpus = 1;
@@ -134,6 +138,15 @@ static void __init bmips_smp_setup(void) @@ -134,6 +145,20 @@ static void __init bmips_smp_setup(void)
*/ */
static void bmips_prepare_cpus(unsigned int max_cpus) static void bmips_prepare_cpus(unsigned int max_cpus)
{ {
+ irqreturn_t (*bmips_ipi_interrupt)(int irq, void *dev_id); + irqreturn_t (*bmips_ipi_interrupt)(int irq, void *dev_id);
+ +
+ if (cpu_is_bmips4350() || cpu_is_bmips4380()) + switch (current_cpu_type()) {
+ case CPU_BMIPS4350:
+ case CPU_BMIPS4380:
+ bmips_ipi_interrupt = bmips43xx_ipi_interrupt; + bmips_ipi_interrupt = bmips43xx_ipi_interrupt;
+ else if (cpu_is_bmips5000()) + break;
+ case CPU_BMIPS5000:
+ bmips_ipi_interrupt = bmips5000_ipi_interrupt; + bmips_ipi_interrupt = bmips5000_ipi_interrupt;
+ else + break;
+ default:
+ return; + return;
+ }
+ +
if (request_irq(IPI0_IRQ, bmips_ipi_interrupt, IRQF_PERCPU, if (request_irq(IPI0_IRQ, bmips_ipi_interrupt, IRQF_PERCPU,
"smp_ipi0", NULL)) "smp_ipi0", NULL))
panic("Can't request IPI0 interrupt\n"); panic("Can't request IPI0 interrupt\n");
@@ -168,26 +181,26 @@ static void bmips_boot_secondary(int cpu @@ -168,26 +193,39 @@ static void bmips_boot_secondary(int cpu
pr_info("SMP: Booting CPU%d...\n", cpu); pr_info("SMP: Booting CPU%d...\n", cpu);
- if (cpumask_test_cpu(cpu, &bmips_booted_mask)) - if (cpumask_test_cpu(cpu, &bmips_booted_mask))
- bmips_send_ipi_single(cpu, 0);
+ if (cpumask_test_cpu(cpu, &bmips_booted_mask)) { + if (cpumask_test_cpu(cpu, &bmips_booted_mask)) {
bmips_send_ipi_single(cpu, 0); + switch (current_cpu_type()) {
- else { + case CPU_BMIPS4350:
+ case CPU_BMIPS4380:
+ bmips43xx_send_ipi_single(cpu, 0);
+ break;
+ case CPU_BMIPS5000:
+ bmips5000_send_ipi_single(cpu, 0);
+ break;
+ }
+ }
else {
-#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380) -#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
- /* Reset slave TP1 if booting from TP0 */ - /* Reset slave TP1 if booting from TP0 */
- if (cpu_logical_map(cpu) == 0) - if (cpu_logical_map(cpu) == 1)
- set_c0_brcm_cmt_ctrl(0x01); - set_c0_brcm_cmt_ctrl(0x01);
-#elif defined(CONFIG_CPU_BMIPS5000) -#elif defined(CONFIG_CPU_BMIPS5000)
- if (cpu & 0x01) - if (cpu & 0x01)
@ -275,12 +332,14 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
- bmips_write_zscm_reg(0x210, 0xc0000000); - bmips_write_zscm_reg(0x210, 0xc0000000);
- udelay(10); - udelay(10);
- bmips_write_zscm_reg(0x210, 0x00); - bmips_write_zscm_reg(0x210, 0x00);
+ } else { + switch (current_cpu_type()) {
+ if (cpu_is_bmips4350() || cpu_is_bmips4380()) { + case CPU_BMIPS4350:
+ case CPU_BMIPS4380:
+ /* Reset slave TP1 if booting from TP0 */ + /* Reset slave TP1 if booting from TP0 */
+ if (cpu_logical_map(cpu) == 0) + if (cpu_logical_map(cpu) == 1)
+ set_c0_brcm_cmt_ctrl(0x01); + set_c0_brcm_cmt_ctrl(0x01);
+ } else if (cpu_is_bmips5000()) { + break;
+ case CPU_BMIPS5000:
+ if (cpu & 0x01) + if (cpu & 0x01)
+ write_c0_brcm_action(ACTION_BOOT_THREAD(cpu)); + write_c0_brcm_action(ACTION_BOOT_THREAD(cpu));
+ else { + else {
@ -292,47 +351,61 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+ udelay(10); + udelay(10);
+ bmips_write_zscm_reg(0x210, 0x00); + bmips_write_zscm_reg(0x210, 0x00);
+ } + }
+ break;
} }
-#endif -#endif
cpumask_set_cpu(cpu, &bmips_booted_mask); cpumask_set_cpu(cpu, &bmips_booted_mask);
} }
} }
@@ -199,20 +212,21 @@ static void bmips_init_secondary(void) @@ -199,26 +237,32 @@ static void bmips_init_secondary(void)
{ {
/* move NMI vector to kseg0, in case XKS01 is enabled */ /* move NMI vector to kseg0, in case XKS01 is enabled */
-#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380) -#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
- void __iomem *cbr = BMIPS_GET_CBR(); - void __iomem *cbr = BMIPS_GET_CBR();
- unsigned long old_vec; + void __iomem *cbr;
unsigned long old_vec;
unsigned long relo_vector;
int boot_cpu;
- boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
- relo_vector = boot_cpu ? BMIPS_RELO_VECTOR_CONTROL_0 :
- BMIPS_RELO_VECTOR_CONTROL_1;
- -
- old_vec = __raw_readl(cbr + BMIPS_RELO_VECTOR_CONTROL_1); - old_vec = __raw_readl(cbr + relo_vector);
- __raw_writel(old_vec & ~0x20000000, cbr + BMIPS_RELO_VECTOR_CONTROL_1); - __raw_writel(old_vec & ~0x20000000, cbr + relo_vector);
- -
- clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0); - clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0);
-#elif defined(CONFIG_CPU_BMIPS5000) -#elif defined(CONFIG_CPU_BMIPS5000)
- write_c0_brcm_bootvec(read_c0_brcm_bootvec() & - write_c0_brcm_bootvec(read_c0_brcm_bootvec() &
- (smp_processor_id() & 0x01 ? ~0x20000000 : ~0x2000)); - (smp_processor_id() & 0x01 ? ~0x20000000 : ~0x2000));
+ if (cpu_is_bmips4350() || cpu_is_bmips4380()) { + switch (current_cpu_type()) {
+ void __iomem *cbr = BMIPS_GET_CBR(); + case CPU_BMIPS4350:
+ unsigned long old_vec; + case CPU_BMIPS4380:
+ cbr = BMIPS_GET_CBR();
+ +
+ old_vec = __raw_readl(cbr + BMIPS_RELO_VECTOR_CONTROL_1); + boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
+ __raw_writel(old_vec & ~0x20000000, + relo_vector = boot_cpu ? BMIPS_RELO_VECTOR_CONTROL_0 :
+ cbr + BMIPS_RELO_VECTOR_CONTROL_1); + BMIPS_RELO_VECTOR_CONTROL_1;
+
+ old_vec = __raw_readl(cbr + relo_vector);
+ __raw_writel(old_vec & ~0x20000000, cbr + relo_vector);
+ +
+ clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0); + clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0);
+ } else if (cpu_is_bmips5000()) { + break;
+ case CPU_BMIPS5000:
+ write_c0_brcm_bootvec(read_c0_brcm_bootvec() & + write_c0_brcm_bootvec(read_c0_brcm_bootvec() &
+ (smp_processor_id() & 0x01 ? ~0x20000000 : ~0x2000)); + (smp_processor_id() & 0x01 ? ~0x20000000 : ~0x2000));
- write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0)); - write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0));
-#endif -#endif
+ write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0)); + write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0));
+ break;
+ } + }
} }
/* /*
@@ -237,8 +251,6 @@ static void bmips_cpus_done(void) @@ -243,8 +287,6 @@ static void bmips_cpus_done(void)
{ {
} }
@ -341,7 +414,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
/* /*
* BMIPS5000 raceless IPIs * BMIPS5000 raceless IPIs
* *
@@ -247,12 +259,12 @@ static void bmips_cpus_done(void) @@ -253,12 +295,12 @@ static void bmips_cpus_done(void)
* IPI1 is used for SMP_CALL_FUNCTION * IPI1 is used for SMP_CALL_FUNCTION
*/ */
@ -356,16 +429,23 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
{ {
int action = irq - IPI0_IRQ; int action = irq - IPI0_IRQ;
@@ -266,8 +278,6 @@ static irqreturn_t bmips_ipi_interrupt(i @@ -272,7 +314,14 @@ static irqreturn_t bmips_ipi_interrupt(i
return IRQ_HANDLED; return IRQ_HANDLED;
} }
-#else -#else
- +static void bmips5000_send_ipi_mask(const struct cpumask *mask,
+ unsigned int action)
+{
+ unsigned int i;
+
+ for_each_cpu(i, mask)
+ bmips5000_send_ipi_single(i, action);
+}
/* /*
* BMIPS43xx racey IPIs * BMIPS43xx racey IPIs
* @@ -287,7 +336,7 @@ static irqreturn_t bmips_ipi_interrupt(i
@@ -281,7 +291,7 @@ static irqreturn_t bmips_ipi_interrupt(i
static DEFINE_SPINLOCK(ipi_lock); static DEFINE_SPINLOCK(ipi_lock);
static DEFINE_PER_CPU(int, ipi_action_mask); static DEFINE_PER_CPU(int, ipi_action_mask);
@ -374,7 +454,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
{ {
unsigned long flags; unsigned long flags;
@@ -292,7 +302,7 @@ static void bmips_send_ipi_single(int cp @@ -298,7 +347,7 @@ static void bmips_send_ipi_single(int cp
spin_unlock_irqrestore(&ipi_lock, flags); spin_unlock_irqrestore(&ipi_lock, flags);
} }
@ -383,22 +463,59 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
{ {
unsigned long flags; unsigned long flags;
int action, cpu = irq - IPI0_IRQ; int action, cpu = irq - IPI0_IRQ;
@@ -311,7 +321,13 @@ static irqreturn_t bmips_ipi_interrupt(i @@ -317,15 +366,13 @@ static irqreturn_t bmips_ipi_interrupt(i
return IRQ_HANDLED; return IRQ_HANDLED;
} }
-#endif /* BMIPS type */ -#endif /* BMIPS type */
+static void bmips_send_ipi_single(int cpu, unsigned int action) -
+{ -static void bmips_send_ipi_mask(const struct cpumask *mask,
+ if (cpu_is_bmips4350() || cpu_is_bmips4380()) +static void bmips43xx_send_ipi_mask(const struct cpumask *mask,
+ bmips43xx_send_ipi_single(cpu, action);
+ else if (cpu_is_bmips5000())
+ bmips5000_send_ipi_single(cpu, action);
+}
static void bmips_send_ipi_mask(const struct cpumask *mask,
unsigned int action) unsigned int action)
@@ -421,43 +437,44 @@ void __cpuinit bmips_ebase_setup(void) {
unsigned int i;
for_each_cpu(i, mask)
- bmips_send_ipi_single(i, action);
+ bmips43xx_send_ipi_single(i, action);
}
#ifdef CONFIG_HOTPLUG_CPU
@@ -381,15 +428,30 @@ void __ref play_dead(void)
#endif /* CONFIG_HOTPLUG_CPU */
-struct plat_smp_ops bmips_smp_ops = {
+struct plat_smp_ops bmips43xx_smp_ops = {
+ .smp_setup = bmips_smp_setup,
+ .prepare_cpus = bmips_prepare_cpus,
+ .boot_secondary = bmips_boot_secondary,
+ .smp_finish = bmips_smp_finish,
+ .init_secondary = bmips_init_secondary,
+ .cpus_done = bmips_cpus_done,
+ .send_ipi_single = bmips43xx_send_ipi_single,
+ .send_ipi_mask = bmips43xx_send_ipi_mask,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_disable = bmips_cpu_disable,
+ .cpu_die = bmips_cpu_die,
+#endif
+};
+
+struct plat_smp_ops bmips5000_smp_ops = {
.smp_setup = bmips_smp_setup,
.prepare_cpus = bmips_prepare_cpus,
.boot_secondary = bmips_boot_secondary,
.smp_finish = bmips_smp_finish,
.init_secondary = bmips_init_secondary,
.cpus_done = bmips_cpus_done,
- .send_ipi_single = bmips_send_ipi_single,
- .send_ipi_mask = bmips_send_ipi_mask,
+ .send_ipi_single = bmips5000_send_ipi_single,
+ .send_ipi_mask = bmips5000_send_ipi_mask,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_disable = bmips_cpu_disable,
.cpu_die = bmips_cpu_die,
@@ -427,43 +489,47 @@ void __cpuinit bmips_ebase_setup(void)
BUG_ON(ebase != CKSEG0); BUG_ON(ebase != CKSEG0);
@ -439,7 +556,8 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
-#else -#else
- return; - return;
-#endif -#endif
+ if (cpu_is_bmips4350()) { + switch (current_cpu_type()) {
+ case CPU_BMIPS4350:
+ /* + /*
+ * BMIPS4350 cannot relocate the normal vectors, but it + * BMIPS4350 cannot relocate the normal vectors, but it
+ * can relocate the BEV=1 vectors. So CPU1 starts up at + * can relocate the BEV=1 vectors. So CPU1 starts up at
@ -454,7 +572,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+ &bmips_smp_int_vec, 0x80); + &bmips_smp_int_vec, 0x80);
+ __sync(); + __sync();
+ return; + return;
+ } else if (cpu_is_bmips4380()) { + case CPU_BMIPS4380:
+ /* + /*
+ * 0x8000_0000: reset/NMI (initially in kseg1) + * 0x8000_0000: reset/NMI (initially in kseg1)
+ * 0x8000_0400: normal vectors + * 0x8000_0400: normal vectors
@ -463,7 +581,8 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+ cbr = BMIPS_GET_CBR(); + cbr = BMIPS_GET_CBR();
+ __raw_writel(0x80080800, cbr + BMIPS_RELO_VECTOR_CONTROL_0); + __raw_writel(0x80080800, cbr + BMIPS_RELO_VECTOR_CONTROL_0);
+ __raw_writel(0xa0080800, cbr + BMIPS_RELO_VECTOR_CONTROL_1); + __raw_writel(0xa0080800, cbr + BMIPS_RELO_VECTOR_CONTROL_1);
+ } else if (cpu_is_bmips5000()) { + break;
+ case CPU_BMIPS5000:
+ /* + /*
+ * 0x8000_0000: reset/NMI (initially in kseg1) + * 0x8000_0000: reset/NMI (initially in kseg1)
+ * 0x8000_1000: normal vectors + * 0x8000_1000: normal vectors
@ -473,7 +592,8 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+ write_c0_ebase(new_ebase); + write_c0_ebase(new_ebase);
+ if (max_cpus > 2) + if (max_cpus > 2)
+ bmips_write_zscm_reg(0xa0, 0xa008a008); + bmips_write_zscm_reg(0xa0, 0xa008a008);
+ } else { + break;
+ default:
+ return; + return;
+ } + }
+ +

45
target/linux/brcm63xx/patches-3.10/104-MIPS-bmips-merge-CPU-options-into-one-option.patch → target/linux/brcm63xx/patches-3.10/063-MIPS-BMIPS-merge-CPU-options-into-one-option.patch
View File

@ -1,31 +1,27 @@
From 1ecac776e6c652e3059d4f4d9dd8369e89ebef81 Mon Sep 17 00:00:00 2001 From 81d6f5e024884ce904b7bd36fec60291d751df48 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org> From: Jonas Gorski <jogo@openwrt.org>
Date: Thu, 27 Jun 2013 23:57:20 +0200 Date: Thu, 27 Jun 2013 23:57:20 +0200
Subject: [PATCH 05/10] MIPS: bmips: merge CPU options into one option Subject: [PATCH V2 04/13] MIPS: BMIPS: merge CPU options into one option
Instead of treating each flavour as an exclusive CPU to select, make Instead of treating each flavour as an exclusive CPU to select, make
BMIPS the only option and let SYS_HAS_CPU_BMIPS* decide for which BMIPS the only option and let SYS_HAS_CPU_BMIPS* decide for which
flavours to include support. flavours to include support.
Run tested on BMIPS3300 and BMIPS4350, only build tested for BMIPS4380 Run tested on BMIPS3300 and BMIPS4350, only build tested for BMIPS4380
and BMISP5000. and BMIPS5000.
Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Jonas Gorski <jogo@openwrt.org>
--- ---
arch/mips/Kconfig | 77 +++++++++++++++++++++++++---------------------------- V1 -> V2:
1 file changed, 36 insertions(+), 41 deletions(-) * Let the SYS_HAS_CPU_BMIPS* symbols select SYS_HAS_CPU_BMIPS instead of
requiring users to select it
arch/mips/Kconfig | 80 +++++++++++++++++++++++++++----------------------------
1 file changed, 39 insertions(+), 41 deletions(-)
--- a/arch/mips/Kconfig --- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig +++ b/arch/mips/Kconfig
@@ -130,6 +130,7 @@ config BCM63XX @@ -1453,41 +1453,21 @@ config CPU_CAVIUM_OCTEON
select DMA_NONCOHERENT
select IRQ_CPU
select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_CPU_BMIPS
select SYS_HAS_CPU_BMIPS4350 if !BCM63XX_CPU_6338 && !BCM63XX_CPU_6345 && !BCM63XX_CPU_6348
select NR_CPUS_DEFAULT_2
select SYS_SUPPORTS_32BIT_KERNEL
@@ -1453,41 +1454,21 @@ config CPU_CAVIUM_OCTEON
can have up to 16 Mips64v2 cores and 8 integrated gigabit ethernets. can have up to 16 Mips64v2 cores and 8 integrated gigabit ethernets.
Full details can be found at http://www.caviumnetworks.com. Full details can be found at http://www.caviumnetworks.com.
@ -68,7 +64,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+ select CPU_MIPS32 + select CPU_MIPS32
+ select CPU_BMIPS3300 if SYS_HAS_CPU_BMIPS3300 + select CPU_BMIPS3300 if SYS_HAS_CPU_BMIPS3300
+ select CPU_BMIPS4350 if SYS_HAS_CPU_BMIPS4350 + select CPU_BMIPS4350 if SYS_HAS_CPU_BMIPS4350
+ select CPU_BMIPS4350 if SYS_HAS_CPU_BMIPS4380 + select CPU_BMIPS4380 if SYS_HAS_CPU_BMIPS4380
+ select CPU_BMIPS5000 if SYS_HAS_CPU_BMIPS5000 + select CPU_BMIPS5000 if SYS_HAS_CPU_BMIPS5000
+ select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_32BIT_KERNEL
+ select DMA_NONCOHERENT + select DMA_NONCOHERENT
@ -81,7 +77,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
config CPU_XLR config CPU_XLR
bool "Netlogic XLR SoC" bool "Netlogic XLR SoC"
@@ -1568,14 +1549,25 @@ config CPU_LOONGSON1 @@ -1568,14 +1548,25 @@ config CPU_LOONGSON1
select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM select CPU_SUPPORTS_HIGHMEM
@ -114,7 +110,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
config SYS_HAS_CPU_LOONGSON2E config SYS_HAS_CPU_LOONGSON2E
bool bool
@@ -1649,6 +1641,9 @@ config SYS_HAS_CPU_SB1 @@ -1649,17 +1640,24 @@ config SYS_HAS_CPU_SB1
config SYS_HAS_CPU_CAVIUM_OCTEON config SYS_HAS_CPU_CAVIUM_OCTEON
bool bool
@ -123,4 +119,19 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+ +
config SYS_HAS_CPU_BMIPS3300 config SYS_HAS_CPU_BMIPS3300
bool bool
+ select SYS_HAS_CPU_BMIPS
config SYS_HAS_CPU_BMIPS4350
bool
+ select SYS_HAS_CPU_BMIPS
config SYS_HAS_CPU_BMIPS4380
bool
+ select SYS_HAS_CPU_BMIPS
config SYS_HAS_CPU_BMIPS5000
bool
+ select SYS_HAS_CPU_BMIPS
config SYS_HAS_CPU_XLR
bool

30
target/linux/brcm63xx/patches-3.10/064-MIPS-BMIPS-select-CPU_SUPPORTS_HIGHMEM.patch Normal file
View File

@ -0,0 +1,30 @@
From 89d4a38dde99a6b141e90860fca594a9ac66336b Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Tue, 16 Jul 2013 14:02:57 +0200
Subject: [PATCH V2 05/13] MIPS: BMIPS: select CPU_SUPPORTS_HIGHMEM
All BMIPS CPUs support HIGHMEM, so it should be selected by CPU_BMIPS.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
---
arch/mips/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1466,6 +1466,7 @@ config CPU_BMIPS
select IRQ_CPU
select SWAP_IO_SPACE
select WEAK_ORDERING
+ select CPU_SUPPORTS_HIGHMEM
help
Support for BMIPS3300/4350/4380 and BMIPS5000 processors.
@@ -1563,7 +1564,6 @@ config CPU_BMIPS4380
config CPU_BMIPS5000
bool
- select CPU_SUPPORTS_HIGHMEM
select MIPS_CPU_SCACHE
select SYS_SUPPORTS_SMP
select SYS_SUPPORTS_HOTPLUG_CPU

22
target/linux/brcm63xx/patches-3.10/065-MIPS-BMIPS-select-CPU_HAS_PREFETCH.patch Normal file
View File

@ -0,0 +1,22 @@
From 58827e709eb7a2e0899260893a5c9c58eb0c5db1 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Tue, 16 Jul 2013 14:04:40 +0200
Subject: [PATCH V2 06/13] MIPS: BMIPS: select CPU_HAS_PREFETCH
As they are MIPS32 CPUs they do support the prefetch opcode.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
---
arch/mips/Kconfig | 1 +
1 file changed, 1 insertion(+)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1467,6 +1467,7 @@ config CPU_BMIPS
select SWAP_IO_SPACE
select WEAK_ORDERING
select CPU_SUPPORTS_HIGHMEM
+ select CPU_HAS_PREFETCH
help
Support for BMIPS3300/4350/4380 and BMIPS5000 processors.

52
target/linux/brcm63xx/patches-3.10/066-MIPS-BMIPS-extend-BMIPS3300-to-include-BMIPS32.patch Normal file
View File

@ -0,0 +1,52 @@
From e742d5b77ec18926293ec5d101470522f67ee159 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Thu, 15 Aug 2013 12:10:11 +0200
Subject: [PATCH V2 07/13] MIPS: BMIPS: extend BMIPS3300 to include BMIPS32
Codewise there is no difference between these two, so it does not make
sense to treat them differently. Also chip families having one of these
tend to have the other.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
---
arch/mips/Kconfig | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1457,7 +1457,7 @@ config CPU_BMIPS
bool "Broadcom BMIPS"
depends on SYS_HAS_CPU_BMIPS
select CPU_MIPS32
- select CPU_BMIPS3300 if SYS_HAS_CPU_BMIPS3300
+ select CPU_BMIPS32_3300 if SYS_HAS_CPU_BMIPS32_3300
select CPU_BMIPS4350 if SYS_HAS_CPU_BMIPS4350
select CPU_BMIPS4380 if SYS_HAS_CPU_BMIPS4380
select CPU_BMIPS5000 if SYS_HAS_CPU_BMIPS5000
@@ -1469,7 +1469,7 @@ config CPU_BMIPS
select CPU_SUPPORTS_HIGHMEM
select CPU_HAS_PREFETCH
help
- Support for BMIPS3300/4350/4380 and BMIPS5000 processors.
+ Support for BMIPS32/3300/4350/4380 and BMIPS5000 processors.
config CPU_XLR
bool "Netlogic XLR SoC"
@@ -1550,7 +1550,7 @@ config CPU_LOONGSON1
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
-config CPU_BMIPS3300
+config CPU_BMIPS32_3300
bool
config CPU_BMIPS4350
@@ -1644,7 +1644,7 @@ config SYS_HAS_CPU_CAVIUM_OCTEON
config SYS_HAS_CPU_BMIPS
bool
-config SYS_HAS_CPU_BMIPS3300
+config SYS_HAS_CPU_BMIPS32_3300
bool
select SYS_HAS_CPU_BMIPS

77
target/linux/brcm63xx/patches-3.10/067-MIPS-BMIPS-add-a-smp-ops-registration-helper.patch Normal file
View File

@ -0,0 +1,77 @@
From 0b135a3e8f344061ed0aa66e2514627dd7aa946f Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Sun, 23 Jun 2013 14:04:51 +0200
Subject: [PATCH V2 08/13] MIPS: BMIPS: add a smp ops registration helper
Add a helper similar to the generic register_XXX_smp_ops() for bmips.
Register SMP UP ops in case of BMIPS32/3300.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
---
V1 -> V2:
* use SMP_UP (ops) in case of BMIPS32_3300
arch/mips/Kconfig | 1 +
arch/mips/bcm63xx/prom.c | 2 +-
arch/mips/include/asm/bmips.h | 26 ++++++++++++++++++++++++++
3 files changed, 28 insertions(+), 1 deletion(-)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1551,6 +1551,7 @@ config CPU_LOONGSON1
select CPU_SUPPORTS_HIGHMEM
config CPU_BMIPS32_3300
+ select SMP_UP if SMP
bool
config CPU_BMIPS4350
--- a/arch/mips/bcm63xx/prom.c
+++ b/arch/mips/bcm63xx/prom.c
@@ -61,7 +61,7 @@ void __init prom_init(void)
if (IS_ENABLED(CONFIG_CPU_BMIPS4350) && IS_ENABLED(CONFIG_SMP)) {
/* set up SMP */
- register_smp_ops(&bmips43xx_smp_ops);
+ register_bmips_smp_ops();
/*
* BCM6328 might not have its second CPU enabled, while BCM3368
--- a/arch/mips/include/asm/bmips.h
+++ b/arch/mips/include/asm/bmips.h
@@ -46,9 +46,35 @@
#include <linux/cpumask.h>
#include <asm/r4kcache.h>
+#include <asm/smp-ops.h>
extern struct plat_smp_ops bmips43xx_smp_ops;
extern struct plat_smp_ops bmips5000_smp_ops;
+
+static inline int register_bmips_smp_ops(void)
+{
+#if IS_ENABLED(CONFIG_CPU_BMIPS) && IS_ENABLED(CONFIG_SMP)
+ switch (current_cpu_type()) {
+ case CPU_BMIPS32:
+ case CPU_BMIPS3300:
+ return register_up_smp_ops();
+ case CPU_BMIPS4350:
+ case CPU_BMIPS4380:
+ register_smp_ops(&bmips43xx_smp_ops);
+ break;
+ case CPU_BMIPS5000:
+ register_smp_ops(&bmips5000_smp_ops);
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ return 0;
+#else
+ return -ENODEV;
+#endif
+}
+
extern char bmips_reset_nmi_vec;
extern char bmips_reset_nmi_vec_end;
extern char bmips_smp_movevec;

27
target/linux/brcm63xx/patches-3.10/068-MIPS-BCM63XX-always-register-bmips-smp-ops.patch Normal file
View File

@ -0,0 +1,27 @@
From 08181bee8ee375225129d086656c567022becf41 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Fri, 28 Jun 2013 00:08:16 +0200
Subject: [PATCH V2 09/13] MIPS: BCM63XX: always register bmips smp ops
Use the return value for guarding further SMP setup.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
---
arch/mips/bcm63xx/prom.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
--- a/arch/mips/bcm63xx/prom.c
+++ b/arch/mips/bcm63xx/prom.c
@@ -59,10 +59,8 @@ void __init prom_init(void)
/* do low level board init */
board_prom_init();
- if (IS_ENABLED(CONFIG_CPU_BMIPS4350) && IS_ENABLED(CONFIG_SMP)) {
- /* set up SMP */
- register_bmips_smp_ops();
-
+ /* set up SMP */
+ if (!register_bmips_smp_ops()) {
/*
* BCM6328 might not have its second CPU enabled, while BCM3368
* and BCM6358 need special handling for their shared TLB, so

20
target/linux/brcm63xx/patches-3.10/105-MIPS-BCM63XX-let-the-individual-SoCs-select-the-appr.patch → target/linux/brcm63xx/patches-3.10/069-MIPS-BCM63XX-let-the-individual-SoCs-select-the-appr.patch
View File

@ -1,7 +1,7 @@
From 9d1e9d7abd2f2d067169fb0c62e34cf080bbd7a1 Mon Sep 17 00:00:00 2001 From 949b88531a779af4f6456ff43d3de2d4f74e44ee Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org> From: Jonas Gorski <jogo@openwrt.org>
Date: Sun, 23 Jun 2013 12:25:49 +0200 Date: Sun, 23 Jun 2013 12:25:49 +0200
Subject: [PATCH 06/10] MIPS: BCM63XX: let the individual SoCs select the Subject: [PATCH V2 10/13] MIPS: BCM63XX: let the individual SoCs select the
appropriate CPUs appropriate CPUs
Let each supported chip select the appropirate SYS_HAS_CPU_BMIPS* Let each supported chip select the appropirate SYS_HAS_CPU_BMIPS*
@ -9,19 +9,17 @@ option for its embedded processor, so support will be conditionally
included. included.
Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Jonas Gorski <jogo@openwrt.org>
fix bmips selection
--- ---
arch/mips/Kconfig | 1 - arch/mips/Kconfig | 1 -
arch/mips/bcm63xx/Kconfig | 8 ++++++++ arch/mips/bcm63xx/Kconfig | 8 ++++++++
2 files changed, 8 insertions(+), 1 deletion(-) 2 files changed, 8 insertions(+), 1 deletion(-)
--- a/arch/mips/Kconfig --- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig +++ b/arch/mips/Kconfig
@@ -131,7 +131,6 @@ config BCM63XX @@ -130,7 +130,6 @@ config BCM63XX
select DMA_NONCOHERENT
select IRQ_CPU select IRQ_CPU
select SYS_HAS_CPU_MIPS32_R1 select SYS_HAS_CPU_MIPS32_R1
select SYS_HAS_CPU_BMIPS
- select SYS_HAS_CPU_BMIPS4350 if !BCM63XX_CPU_6338 && !BCM63XX_CPU_6345 && !BCM63XX_CPU_6348 - select SYS_HAS_CPU_BMIPS4350 if !BCM63XX_CPU_6338 && !BCM63XX_CPU_6345 && !BCM63XX_CPU_6348
select NR_CPUS_DEFAULT_2 select NR_CPUS_DEFAULT_2
select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_32BIT_KERNEL
@ -42,16 +40,16 @@ fix bmips selection
config BCM63XX_CPU_6338 config BCM63XX_CPU_6338
bool "support 6338 CPU" bool "support 6338 CPU"
+ select SYS_HAS_CPU_BMIPS3300 + select SYS_HAS_CPU_BMIPS32_3300
select HW_HAS_PCI select HW_HAS_PCI
config BCM63XX_CPU_6345 config BCM63XX_CPU_6345
bool "support 6345 CPU" bool "support 6345 CPU"
+ select SYS_HAS_CPU_BMIPS3300 + select SYS_HAS_CPU_BMIPS32_3300
config BCM63XX_CPU_6348 config BCM63XX_CPU_6348
bool "support 6348 CPU" bool "support 6348 CPU"
+ select SYS_HAS_CPU_BMIPS3300 + select SYS_HAS_CPU_BMIPS32_3300
select HW_HAS_PCI select HW_HAS_PCI
config BCM63XX_CPU_6358 config BCM63XX_CPU_6358

24
target/linux/brcm63xx/patches-3.10/071-MIPS-BCM63XX-drop-SYS_HAS_CPU_MIPS32R1.patch Normal file
View File

@ -0,0 +1,24 @@
From c6c4897703d825c9efea6d9a708aaa080c8c3177 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Thu, 17 Oct 2013 13:16:08 +0200
Subject: [PATCH V2 13/13] MIPS: BCM63XX: drop SYS_HAS_CPU_MIPS32R1
All MIPS cores on BCM63XX identify as Broadcom, not MIPS, so no need
to support non-broadcom MIPS CPUs. This also ensures that CPU_BMIPS
is always selected.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
---
arch/mips/Kconfig | 1 -
1 file changed, 1 deletion(-)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -129,7 +129,6 @@ config BCM63XX
select CSRC_R4K
select DMA_NONCOHERENT
select IRQ_CPU
- select SYS_HAS_CPU_MIPS32_R1
select NR_CPUS_DEFAULT_2
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN

4
target/linux/brcm63xx/patches-3.10/100-MIPS-bmips-fix-compilation-for-BMIPS5000.patch
View File

@ -21,7 +21,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
--- a/arch/mips/include/asm/bmips.h --- a/arch/mips/include/asm/bmips.h
+++ b/arch/mips/include/asm/bmips.h +++ b/arch/mips/include/asm/bmips.h
@@ -70,15 +70,15 @@ static inline unsigned long bmips_read_z @@ -97,15 +97,15 @@ static inline unsigned long bmips_read_z
".set noreorder\n" ".set noreorder\n"
"cache %1, 0(%2)\n" "cache %1, 0(%2)\n"
"sync\n" "sync\n"
@ -45,7 +45,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
".set pop\n" ".set pop\n"
: "=&r" (ret) : "=&r" (ret)
: "i" (Index_Load_Tag_S), "r" (ZSCM_REG_BASE + offset) : "i" (Index_Load_Tag_S), "r" (ZSCM_REG_BASE + offset)
@@ -92,13 +92,13 @@ static inline void bmips_write_zscm_reg( @@ -119,13 +119,13 @@ static inline void bmips_write_zscm_reg(
".set push\n" ".set push\n"
".set noreorder\n" ".set noreorder\n"
"mtc0 %0, $28, 3\n" "mtc0 %0, $28, 3\n"

36
target/linux/brcm63xx/patches-3.10/102-MIPS-bmips-add-macros-for-testing-the-current-bmips-.patch
View File

@ -1,36 +0,0 @@
From 971b8b3d5101b3bb868e63f3eb96fe69b7110c61 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Thu, 27 Jun 2013 12:40:15 +0200
Subject: [PATCH 03/10] MIPS: bmips: add macros for testing the current bmips
CPU
Makes it easy to make code conditionally compiled for supported CPUs
without directly relying on #ifdefs.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
---
arch/mips/include/asm/bmips.h | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/arch/mips/include/asm/bmips.h
+++ b/arch/mips/include/asm/bmips.h
@@ -45,8 +45,19 @@
#if !defined(__ASSEMBLY__)
#include <linux/cpumask.h>
+#include <asm/cpu-features.h>
#include <asm/r4kcache.h>
+#define cpu_is_bmips32() (current_cpu_type() == CPU_BMIPS32)
+#define cpu_is_bmips3300() (IS_ENABLED(CONFIG_CPU_BMIPS3300) && \
+ current_cpu_type() == CPU_BMIPS3300)
+#define cpu_is_bmips4350() (IS_ENABLED(CONFIG_CPU_BMIPS4350) && \
+ current_cpu_type() == CPU_BMIPS4350)
+#define cpu_is_bmips4380() (IS_ENABLED(CONFIG_CPU_BMIPS4380) && \
+ current_cpu_type() == CPU_BMIPS4380)
+#define cpu_is_bmips5000() (IS_ENABLED(CONFIG_CPU_BMIPS5000) && \
+ current_cpu_type() == CPU_BMIPS5000)
+
extern struct plat_smp_ops bmips_smp_ops;
extern char bmips_reset_nmi_vec;
extern char bmips_reset_nmi_vec_end;

42
target/linux/brcm63xx/patches-3.10/106-MIPS-bmips-add-a-helper-function-for-registering-smp.patch
View File

@ -1,42 +0,0 @@
From aa15ac91faccc3bf01a29670b1f9ae1945cea056 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Sun, 23 Jun 2013 14:04:51 +0200
Subject: [PATCH 07/10] MIPS: bmips: add a helper function for registering smp
ops
Add a helper similar to the generic register_XXX_smp_ops() for bmips.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
---
arch/mips/include/asm/bmips.h | 13 +++++++++++++
1 file changed, 13 insertions(+)
--- a/arch/mips/include/asm/bmips.h
+++ b/arch/mips/include/asm/bmips.h
@@ -47,6 +47,7 @@
#include <linux/cpumask.h>
#include <asm/cpu-features.h>
#include <asm/r4kcache.h>
+#include <asm/smp-ops.h>
#define cpu_is_bmips32() (current_cpu_type() == CPU_BMIPS32)
#define cpu_is_bmips3300() (IS_ENABLED(CONFIG_CPU_BMIPS3300) && \
@@ -59,6 +60,18 @@
current_cpu_type() == CPU_BMIPS5000)
extern struct plat_smp_ops bmips_smp_ops;
+
+static inline int register_bmips_smp_ops(void)
+{
+#ifdef CONFIG_CPU_BMIPS
+ register_smp_ops(&bmips_smp_ops);
+
+ return 0;
+#else
+ return -ENODEV;
+#endif
+}
+
extern char bmips_reset_nmi_vec;
extern char bmips_reset_nmi_vec_end;
extern char bmips_smp_movevec;

26
target/linux/brcm63xx/patches-3.10/107-MIPS-BCM63XX-always-register-bmips-smp-ops.patch
View File

@ -1,26 +0,0 @@
From c489eace9492d1b8bedb314bdef169e719161bff Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Fri, 28 Jun 2013 00:08:16 +0200
Subject: [PATCH 08/10] MIPS: BCM63XX: always register bmips smp ops
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
---
arch/mips/bcm63xx/prom.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/mips/bcm63xx/prom.c
+++ b/arch/mips/bcm63xx/prom.c
@@ -59,10 +59,10 @@ void __init prom_init(void)
/* do low level board init */
board_prom_init();
- if (IS_ENABLED(CONFIG_CPU_BMIPS4350) && IS_ENABLED(CONFIG_SMP)) {
- /* set up SMP */
- register_smp_ops(&bmips_smp_ops);
+ /* set up SMP */
+ register_bmips_smp_ops();
+ if (IS_ENABLED(CONFIG_CPU_BMIPS4350) && IS_ENABLED(CONFIG_SMP)) {
/*
* BCM6328 might not have its second CPU enabled, while BCM6358
* needs special handling for its shared TLB, so disable SMP

21
target/linux/brcm63xx/patches-3.10/108-MIPS-BCM63XX-change-the-guard-to-a-BMIPS4350-check.patch
View File

@ -1,21 +0,0 @@
From 3a862fd3cc4f477ad2232370abfceca1ec2145ae Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Fri, 28 Jun 2013 00:10:07 +0200
Subject: [PATCH 09/10] MIPS: BCM63XX: change the guard to a BMIPS4350 check
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
---
arch/mips/bcm63xx/prom.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/bcm63xx/prom.c
+++ b/arch/mips/bcm63xx/prom.c
@@ -62,7 +62,7 @@ void __init prom_init(void)
/* set up SMP */
register_bmips_smp_ops();
- if (IS_ENABLED(CONFIG_CPU_BMIPS4350) && IS_ENABLED(CONFIG_SMP)) {
+ if (cpu_is_bmips4350()) {
/*
* BCM6328 might not have its second CPU enabled, while BCM6358
* needs special handling for its shared TLB, so disable SMP

2
target/linux/brcm63xx/patches-3.10/114-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch
View File

@ -36,7 +36,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
bool "support 6338 CPU" bool "support 6338 CPU"
@@ -24,21 +31,25 @@ config BCM63XX_CPU_6348 @@ -24,21 +31,25 @@ config BCM63XX_CPU_6348
bool "support 6348 CPU" bool "support 6348 CPU"
select SYS_HAS_CPU_BMIPS3300 select SYS_HAS_CPU_BMIPS32_3300
select HW_HAS_PCI select HW_HAS_PCI
+ select BCM63XX_OHCI + select BCM63XX_OHCI

8
target/linux/brcm63xx/smp/config-default
View File

@ -1,7 +1,3 @@
CONFIG_CPU_BMIPS=y
CONFIG_CPU_BMIPS3300=y
CONFIG_CPU_BMIPS4350=y
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_RMAP=y CONFIG_CPU_RMAP=y
# CONFIG_KEXEC is not set # CONFIG_KEXEC is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y CONFIG_MUTEX_SPIN_ON_OWNER=y
@ -10,10 +6,8 @@ CONFIG_RCU_STALL_COMMON=y
CONFIG_RFS_ACCEL=y CONFIG_RFS_ACCEL=y
CONFIG_RPS=y CONFIG_RPS=y
CONFIG_SMP=y CONFIG_SMP=y
CONFIG_SMP_UP=y
CONFIG_STOP_MACHINE=y CONFIG_STOP_MACHINE=y
CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y
CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_TREE_RCU=y CONFIG_TREE_RCU=y
CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_WEAK_ORDERING=y
CONFIG_XPS=y CONFIG_XPS=y