openwrt/package/boot/uboot-envtools/files
Michal Cieslakiewicz f85d56bb03 ath79: add support for Netgear WNR2200
This patch adds ath79 support for Netgear WNR2200.
Router was previously supported by ar71xx target only (8 MiB variant).
Netgear WNR2200 has two flash versions - 8MiB sold in EU, US etc. and
16 MiB for Russia and China markets. Apart from flash size both variants
share the same hardware specification.

Specification
=============
  * Description: Netgear WNR2200
  * Loader: U-boot
  * SOC: Atheros AR7241 (360 MHz)
  * RAM: 64 MiB
  * Flash: 8 MiB or 16 MiB (SPI NOR)
	- U-boot binary: 256 KiB
	- U-boot environment: 64 KiB
	- Firmware: 7808 KiB or 16000 KiB
	- ART: 64 KiB
  * Ethernet: 4 x 10/100 LAN + 1 x 10/100 WAN
  * Wireless: 2.4 GHz b/g/n (Atheros AR9287)
  * USB: yes, 1 x USB 2.0
  * Buttons:
	- Reset
	- WiFi (rfkill)
	- WPS
  * LEDs:
	- Power (amber/green)
	- WAN (amber/green)
	- WLAN (blue)
	- 4 x LAN (amber/green)
	- WPS (green)
  * UART: 4-pin connector JP1, 3.3V (Vcc, TX, RX, GND), 115200 8N1
  * Power supply: DC 12V 1.5A
  * MAC addresses: LAN on case label, WAN +1, WLAN +2

Installation
============
  * TFTP recovery
  * TFTP via U-boot prompt
  * sysupgrade
  * Web interface

Test build configuration
========================
CONFIG_TARGET_ath79=y
CONFIG_TARGET_ath79_generic=y
CONFIG_TARGET_ath79_generic_DEVICE_netgear_wnr2200-8m=y
CONFIG_ALL_KMODS=y
CONFIG_DEVEL=y
CONFIG_CCACHE=y
CONFIG_COLLECT_KERNEL_DEBUG=y
CONFIG_IMAGEOPT=y
CONFIG_KERNEL_DEBUG_INFO=y
CONFIG_KERNEL_DEBUG_KERNEL=y

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
2019-11-01 21:14:55 +01:00
..
apm821xx apm821xx: add support for the Netgear WNDAP620 and WNDAP660 2018-11-26 12:05:46 +01:00
ar71xx uboot-envtools: Add domywifi dw33d support 2019-01-02 22:24:52 +01:00
ath79 ath79: add support for Netgear WNR2200 2019-11-01 21:14:55 +01:00
cns3xxx treewide: use the generic board_name function 2017-07-15 23:13:34 +02:00
imx6 uboot-envtools: remove erasesize from MMC config 2019-10-21 12:28:03 +02:00
ipq40xx ipq40xx: Add support for Linksys EA8300 (Dallas) 2019-05-18 13:43:54 +02:00
ipq806x uboot-envtools: adds r7800 uboot env support 2018-10-07 02:12:06 +02:00
kirkwood kirkwood: add support for Iomega Storcenter ix2-200 2018-07-30 15:21:00 +02:00
lantiq lantiq: use the compatible string as board name 2017-12-16 23:33:56 +01:00
layerscape uboot-envtools: add configuration for Traverse LS1043 boards. 2018-07-30 10:53:57 +02:00
mpc85xx mpc85xx: add support for OCEDO Panda 2019-01-26 17:10:19 +01:00
mvebu mvebu: uDPU: add sysupgrade support 2019-08-24 23:11:15 +02:00
mxs uboot-envtools: fix configuration for I2SE Duckbills 2018-12-18 20:17:22 +01:00
oxnas uboot-envtools: fix fw_env.config for ox820/stg-212 2019-04-11 19:21:55 +02:00
pistachio pistachio: remove custom board detection override 2017-03-22 11:43:22 +01:00
ramips uboot-envtools: Apply ramips device renames 2019-07-10 17:36:29 +02:00
uboot-envtools.sh