The USB port on Mikrotik RB750UP isn’t detected. This patch provides a fix. Tested and working. Signed-off-by: João Chaínho <joaochainho@gmail.com>
		
			
				
	
	
		
			350 lines
		
	
	
		
			8.7 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			350 lines
		
	
	
		
			8.7 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 *  MikroTik RouterBOARD 750/750GL support
 | 
						|
 *
 | 
						|
 *  Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
 | 
						|
 *
 | 
						|
 *  This program is free software; you can redistribute it and/or modify it
 | 
						|
 *  under the terms of the GNU General Public License version 2 as published
 | 
						|
 *  by the Free Software Foundation.
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/export.h>
 | 
						|
#include <linux/pci.h>
 | 
						|
#include <linux/ath9k_platform.h>
 | 
						|
#include <linux/platform_device.h>
 | 
						|
#include <linux/phy.h>
 | 
						|
#include <linux/ar8216_platform.h>
 | 
						|
#include <linux/rle.h>
 | 
						|
#include <linux/routerboot.h>
 | 
						|
 | 
						|
#include <asm/mach-ath79/ar71xx_regs.h>
 | 
						|
#include <asm/mach-ath79/ath79.h>
 | 
						|
#include <asm/mach-ath79/irq.h>
 | 
						|
#include <asm/mach-ath79/mach-rb750.h>
 | 
						|
 | 
						|
#include "common.h"
 | 
						|
#include "dev-ap9x-pci.h"
 | 
						|
#include "dev-usb.h"
 | 
						|
#include "dev-eth.h"
 | 
						|
#include "machtypes.h"
 | 
						|
#include "routerboot.h"
 | 
						|
 | 
						|
static struct rb750_led_data rb750_leds[] = {
 | 
						|
	{
 | 
						|
		.name		= "rb750:green:act",
 | 
						|
		.mask		= RB750_LED_ACT,
 | 
						|
		.active_low	= 1,
 | 
						|
	}, {
 | 
						|
		.name		= "rb750:green:port1",
 | 
						|
		.mask		= RB750_LED_PORT5,
 | 
						|
		.active_low	= 1,
 | 
						|
	}, {
 | 
						|
		.name		= "rb750:green:port2",
 | 
						|
		.mask		= RB750_LED_PORT4,
 | 
						|
		.active_low	= 1,
 | 
						|
	}, {
 | 
						|
		.name		= "rb750:green:port3",
 | 
						|
		.mask		= RB750_LED_PORT3,
 | 
						|
		.active_low	= 1,
 | 
						|
	}, {
 | 
						|
		.name		= "rb750:green:port4",
 | 
						|
		.mask		= RB750_LED_PORT2,
 | 
						|
		.active_low	= 1,
 | 
						|
	}, {
 | 
						|
		.name		= "rb750:green:port5",
 | 
						|
		.mask		= RB750_LED_PORT1,
 | 
						|
		.active_low	= 1,
 | 
						|
	}
 | 
						|
};
 | 
						|
 | 
						|
static struct rb750_led_data rb750gr3_leds[] = {
 | 
						|
	{
 | 
						|
		.name		= "rb750:green:act",
 | 
						|
		.mask		= RB7XX_LED_ACT,
 | 
						|
		.active_low	= 1,
 | 
						|
	},
 | 
						|
};
 | 
						|
 | 
						|
static struct rb750_led_platform_data rb750_leds_data;
 | 
						|
static struct platform_device rb750_leds_device = {
 | 
						|
	.name	= "leds-rb750",
 | 
						|
	.dev	= {
 | 
						|
		.platform_data = &rb750_leds_data,
 | 
						|
	}
 | 
						|
};
 | 
						|
 | 
						|
static struct rb7xx_nand_platform_data rb750_nand_data;
 | 
						|
static struct platform_device rb750_nand_device = {
 | 
						|
	.name	= "rb750-nand",
 | 
						|
	.id	= -1,
 | 
						|
	.dev	= {
 | 
						|
		.platform_data = &rb750_nand_data,
 | 
						|
	}
 | 
						|
};
 | 
						|
 | 
						|
static void rb750_latch_change(u32 mask_clr, u32 mask_set)
 | 
						|
{
 | 
						|
	static DEFINE_SPINLOCK(lock);
 | 
						|
	static u32 latch_set = RB750_LED_BITS | RB750_LVC573_LE;
 | 
						|
	static u32 latch_oe;
 | 
						|
	static u32 latch_clr;
 | 
						|
	unsigned long flags;
 | 
						|
	u32 t;
 | 
						|
 | 
						|
	spin_lock_irqsave(&lock, flags);
 | 
						|
 | 
						|
	if ((mask_clr & BIT(31)) != 0 &&
 | 
						|
	    (latch_set & RB750_LVC573_LE) == 0) {
 | 
						|
		goto unlock;
 | 
						|
	}
 | 
						|
 | 
						|
	latch_set = (latch_set | mask_set) & ~mask_clr;
 | 
						|
	latch_clr = (latch_clr | mask_clr) & ~mask_set;
 | 
						|
 | 
						|
	if (latch_oe == 0)
 | 
						|
		latch_oe = __raw_readl(ath79_gpio_base + AR71XX_GPIO_REG_OE);
 | 
						|
 | 
						|
	if (likely(latch_set & RB750_LVC573_LE)) {
 | 
						|
		void __iomem *base = ath79_gpio_base;
 | 
						|
 | 
						|
		t = __raw_readl(base + AR71XX_GPIO_REG_OE);
 | 
						|
		t |= mask_clr | latch_oe | mask_set;
 | 
						|
 | 
						|
		__raw_writel(t, base + AR71XX_GPIO_REG_OE);
 | 
						|
		__raw_writel(latch_clr, base + AR71XX_GPIO_REG_CLEAR);
 | 
						|
		__raw_writel(latch_set, base + AR71XX_GPIO_REG_SET);
 | 
						|
	} else if (mask_clr & RB750_LVC573_LE) {
 | 
						|
		void __iomem *base = ath79_gpio_base;
 | 
						|
 | 
						|
		latch_oe = __raw_readl(base + AR71XX_GPIO_REG_OE);
 | 
						|
		__raw_writel(RB750_LVC573_LE, base + AR71XX_GPIO_REG_CLEAR);
 | 
						|
		/* flush write */
 | 
						|
		__raw_readl(base + AR71XX_GPIO_REG_CLEAR);
 | 
						|
	}
 | 
						|
 | 
						|
unlock:
 | 
						|
	spin_unlock_irqrestore(&lock, flags);
 | 
						|
}
 | 
						|
 | 
						|
static void rb750_nand_enable_pins(void)
 | 
						|
{
 | 
						|
	rb750_latch_change(RB750_LVC573_LE, 0);
 | 
						|
	ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
 | 
						|
				  AR724X_GPIO_FUNC_SPI_EN);
 | 
						|
}
 | 
						|
 | 
						|
static void rb750_nand_disable_pins(void)
 | 
						|
{
 | 
						|
	ath79_gpio_function_setup(AR724X_GPIO_FUNC_SPI_EN,
 | 
						|
				  AR724X_GPIO_FUNC_JTAG_DISABLE);
 | 
						|
	rb750_latch_change(0, RB750_LVC573_LE);
 | 
						|
}
 | 
						|
 | 
						|
static void __init rb750_setup(void)
 | 
						|
{
 | 
						|
	ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
 | 
						|
				     AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
 | 
						|
				     AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
 | 
						|
				     AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
 | 
						|
				     AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
 | 
						|
 | 
						|
	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
 | 
						|
	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
 | 
						|
 | 
						|
	ath79_register_mdio(0, 0x0);
 | 
						|
 | 
						|
	/* LAN ports */
 | 
						|
	ath79_register_eth(1);
 | 
						|
 | 
						|
	/* WAN port */
 | 
						|
	ath79_register_eth(0);
 | 
						|
 | 
						|
	rb750_leds_data.num_leds = ARRAY_SIZE(rb750_leds);
 | 
						|
	rb750_leds_data.leds = rb750_leds;
 | 
						|
	rb750_leds_data.latch_change = rb750_latch_change;
 | 
						|
	platform_device_register(&rb750_leds_device);
 | 
						|
 | 
						|
	rb750_nand_data.nce_line = RB750_NAND_NCE;
 | 
						|
	rb750_nand_data.enable_pins = rb750_nand_enable_pins;
 | 
						|
	rb750_nand_data.disable_pins = rb750_nand_disable_pins;
 | 
						|
	rb750_nand_data.latch_change = rb750_latch_change;
 | 
						|
	platform_device_register(&rb750_nand_device);
 | 
						|
 | 
						|
	/* USB */
 | 
						|
	ath79_register_usb();
 | 
						|
}
 | 
						|
 | 
						|
MIPS_MACHINE(ATH79_MACH_RB_750, "750i", "MikroTik RouterBOARD 750",
 | 
						|
	     rb750_setup);
 | 
						|
 | 
						|
static struct ar8327_pad_cfg rb750gr3_ar8327_pad0_cfg = {
 | 
						|
	.mode = AR8327_PAD_MAC_RGMII,
 | 
						|
	.txclk_delay_en = true,
 | 
						|
	.rxclk_delay_en = true,
 | 
						|
	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
 | 
						|
	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
 | 
						|
};
 | 
						|
 | 
						|
static struct ar8327_platform_data rb750gr3_ar8327_data = {
 | 
						|
	.pad0_cfg = &rb750gr3_ar8327_pad0_cfg,
 | 
						|
	.port0_cfg = {
 | 
						|
		.force_link = 1,
 | 
						|
		.speed = AR8327_PORT_SPEED_1000,
 | 
						|
		.duplex = 1,
 | 
						|
		.txpause = 1,
 | 
						|
		.rxpause = 1,
 | 
						|
	}
 | 
						|
};
 | 
						|
 | 
						|
static struct mdio_board_info rb750g3_mdio_info[] = {
 | 
						|
	{
 | 
						|
		.bus_id = "ag71xx-mdio.0",
 | 
						|
		.phy_addr = 0,
 | 
						|
		.platform_data = &rb750gr3_ar8327_data,
 | 
						|
	},
 | 
						|
};
 | 
						|
 | 
						|
static void rb750gr3_nand_enable_pins(void)
 | 
						|
{
 | 
						|
	ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
 | 
						|
				  AR724X_GPIO_FUNC_SPI_EN |
 | 
						|
				  AR724X_GPIO_FUNC_SPI_CS_EN2);
 | 
						|
}
 | 
						|
 | 
						|
static void rb750gr3_nand_disable_pins(void)
 | 
						|
{
 | 
						|
	ath79_gpio_function_setup(AR724X_GPIO_FUNC_SPI_EN |
 | 
						|
				  AR724X_GPIO_FUNC_SPI_CS_EN2,
 | 
						|
				  AR724X_GPIO_FUNC_JTAG_DISABLE);
 | 
						|
}
 | 
						|
 | 
						|
static void rb750gr3_latch_change(u32 mask_clr, u32 mask_set)
 | 
						|
{
 | 
						|
	static DEFINE_SPINLOCK(lock);
 | 
						|
	static u32 latch_set = RB7XX_LED_ACT;
 | 
						|
	static u32 latch_clr;
 | 
						|
	void __iomem *base = ath79_gpio_base;
 | 
						|
	unsigned long flags;
 | 
						|
	u32 t;
 | 
						|
 | 
						|
	spin_lock_irqsave(&lock, flags);
 | 
						|
 | 
						|
	latch_set = (latch_set | mask_set) & ~mask_clr;
 | 
						|
	latch_clr = (latch_clr | mask_clr) & ~mask_set;
 | 
						|
 | 
						|
	mask_set = latch_set & (RB7XX_USB_POWERON | RB7XX_MONITOR);
 | 
						|
	mask_clr = latch_clr & (RB7XX_USB_POWERON | RB7XX_MONITOR);
 | 
						|
 | 
						|
	if ((latch_set ^ RB7XX_LED_ACT) & RB7XX_LED_ACT) {
 | 
						|
		/* enable output mode */
 | 
						|
		t = __raw_readl(base + AR71XX_GPIO_REG_OE);
 | 
						|
		t |= RB7XX_LED_ACT;
 | 
						|
		__raw_writel(t, base + AR71XX_GPIO_REG_OE);
 | 
						|
 | 
						|
		mask_clr |= RB7XX_LED_ACT;
 | 
						|
	} else {
 | 
						|
		/* disable output mode */
 | 
						|
		t = __raw_readl(base + AR71XX_GPIO_REG_OE);
 | 
						|
		t &= ~RB7XX_LED_ACT;
 | 
						|
		__raw_writel(t, base + AR71XX_GPIO_REG_OE);
 | 
						|
	}
 | 
						|
 | 
						|
	__raw_writel(mask_set, base + AR71XX_GPIO_REG_SET);
 | 
						|
	__raw_writel(mask_clr, base + AR71XX_GPIO_REG_CLEAR);
 | 
						|
 | 
						|
	spin_unlock_irqrestore(&lock, flags);
 | 
						|
}
 | 
						|
 | 
						|
static void __init rb750gr3_setup(void)
 | 
						|
{
 | 
						|
	ath79_register_mdio(0, 0x0);
 | 
						|
	mdiobus_register_board_info(rb750g3_mdio_info,
 | 
						|
				    ARRAY_SIZE(rb750g3_mdio_info));
 | 
						|
 | 
						|
	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
 | 
						|
	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
 | 
						|
	ath79_eth0_data.phy_mask = BIT(0);
 | 
						|
	ath79_eth0_pll_data.pll_1000 = 0x62000000;
 | 
						|
 | 
						|
	ath79_register_eth(0);
 | 
						|
 | 
						|
	rb750_leds_data.num_leds = ARRAY_SIZE(rb750gr3_leds);
 | 
						|
	rb750_leds_data.leds = rb750gr3_leds;
 | 
						|
	rb750_leds_data.latch_change = rb750gr3_latch_change;
 | 
						|
	platform_device_register(&rb750_leds_device);
 | 
						|
 | 
						|
	rb750_nand_data.nce_line = RB7XX_NAND_NCE;
 | 
						|
	rb750_nand_data.enable_pins = rb750gr3_nand_enable_pins;
 | 
						|
	rb750_nand_data.disable_pins = rb750gr3_nand_disable_pins;
 | 
						|
	rb750_nand_data.latch_change = rb750gr3_latch_change;
 | 
						|
	platform_device_register(&rb750_nand_device);
 | 
						|
}
 | 
						|
 | 
						|
MIPS_MACHINE(ATH79_MACH_RB_750G_R3, "750Gr3", "MikroTik RouterBOARD 750GL",
 | 
						|
	     rb750gr3_setup);
 | 
						|
 | 
						|
#define RB751_HARDCONFIG	0x1f00b000
 | 
						|
#define RB751_HARDCONFIG_SIZE	0x1000
 | 
						|
 | 
						|
static void __init rb751_wlan_setup(void)
 | 
						|
{
 | 
						|
	u8 *hardconfig = (u8 *) KSEG1ADDR(RB751_HARDCONFIG);
 | 
						|
	struct ath9k_platform_data *wmac_data;
 | 
						|
	u16 tag_len;
 | 
						|
	u8 *tag;
 | 
						|
	u16 mac_len;
 | 
						|
	u8 *mac;
 | 
						|
	int err;
 | 
						|
 | 
						|
	wmac_data = ap9x_pci_get_wmac_data(0);
 | 
						|
	if (!wmac_data) {
 | 
						|
		pr_err("rb75x: unable to get address of wlan data\n");
 | 
						|
		return;
 | 
						|
	}
 | 
						|
 | 
						|
	ap9x_pci_setup_wmac_led_pin(0, 9);
 | 
						|
 | 
						|
	err = routerboot_find_tag(hardconfig, RB751_HARDCONFIG_SIZE,
 | 
						|
				  RB_ID_WLAN_DATA, &tag, &tag_len);
 | 
						|
	if (err) {
 | 
						|
		pr_err("rb75x: no calibration data found\n");
 | 
						|
		return;
 | 
						|
	}
 | 
						|
 | 
						|
	err = rle_decode(tag, tag_len, (unsigned char *) wmac_data->eeprom_data,
 | 
						|
			 sizeof(wmac_data->eeprom_data), NULL, NULL);
 | 
						|
	if (err) {
 | 
						|
		pr_err("rb75x: unable to decode wlan eeprom data\n");
 | 
						|
		return;
 | 
						|
	}
 | 
						|
 | 
						|
	err = routerboot_find_tag(hardconfig, RB751_HARDCONFIG_SIZE,
 | 
						|
                                 RB_ID_MAC_ADDRESS_PACK, &mac, &mac_len);
 | 
						|
	if (err) {
 | 
						|
		pr_err("rb75x: no mac address found\n");
 | 
						|
		return;
 | 
						|
	}
 | 
						|
 | 
						|
	ap91_pci_init(NULL, mac);
 | 
						|
}
 | 
						|
 | 
						|
static void __init rb751_setup(void)
 | 
						|
{
 | 
						|
	rb750_setup();
 | 
						|
	ath79_register_usb();
 | 
						|
	rb751_wlan_setup();
 | 
						|
}
 | 
						|
 | 
						|
MIPS_MACHINE(ATH79_MACH_RB_751, "751", "MikroTik RouterBOARD 751",
 | 
						|
	     rb751_setup);
 | 
						|
 | 
						|
static void __init rb751g_setup(void)
 | 
						|
{
 | 
						|
	rb750gr3_setup();
 | 
						|
	ath79_register_usb();
 | 
						|
	rb751_wlan_setup();
 | 
						|
}
 | 
						|
 | 
						|
MIPS_MACHINE(ATH79_MACH_RB_751G, "751g", "MikroTik RouterBOARD 751G",
 | 
						|
	     rb751g_setup);
 |