d4ac26ec49
Current version of rtl8366-smi module only supports Realtek switch
managment via two gpio lines. This adds Realtek switch
management via mii_bus. Tested on a Tp-link Archer C2 v1 (Mediatek
SoC mt7620a based)
dts-file configuration should look like this:
rtl8367rb {
compatible = "realtek,rtl8367b";
realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
mii-bus = <&mdio0>;
};
ðernet {
status = "okay";
mtd-mac-address = <&rom 0xf100>;
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
port@5 {
status = "okay";
mediatek,fixed-link = <1000 1 1 1>;
phy-mode = "rgmii";
};
mdio0: mdio-bus {
status = "okay";
};
};
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
Signed-off-by: Franz Flasch <franz.flasch@gmx.at>
161 lines
4.9 KiB
C
161 lines
4.9 KiB
C
/*
|
|
* Realtek RTL8366 SMI interface driver defines
|
|
*
|
|
* Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#ifndef _RTL8366_SMI_H
|
|
#define _RTL8366_SMI_H
|
|
|
|
#include <linux/phy.h>
|
|
#include <linux/switch.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reset.h>
|
|
|
|
struct rtl8366_smi_ops;
|
|
struct rtl8366_vlan_ops;
|
|
struct mii_bus;
|
|
struct dentry;
|
|
struct inode;
|
|
struct file;
|
|
|
|
struct rtl8366_mib_counter {
|
|
unsigned base;
|
|
unsigned offset;
|
|
unsigned length;
|
|
const char *name;
|
|
};
|
|
|
|
struct rtl8366_smi {
|
|
struct device *parent;
|
|
unsigned int gpio_sda;
|
|
unsigned int gpio_sck;
|
|
void (*hw_reset)(struct rtl8366_smi *smi, bool active);
|
|
unsigned int clk_delay; /* ns */
|
|
u8 cmd_read;
|
|
u8 cmd_write;
|
|
spinlock_t lock;
|
|
struct mii_bus *mii_bus;
|
|
int mii_irq[PHY_MAX_ADDR];
|
|
struct switch_dev sw_dev;
|
|
|
|
unsigned int cpu_port;
|
|
unsigned int num_ports;
|
|
unsigned int num_vlan_mc;
|
|
unsigned int num_mib_counters;
|
|
struct rtl8366_mib_counter *mib_counters;
|
|
|
|
struct rtl8366_smi_ops *ops;
|
|
|
|
int vlan_enabled;
|
|
int vlan4k_enabled;
|
|
|
|
char buf[4096];
|
|
|
|
struct reset_control *reset;
|
|
|
|
#ifdef CONFIG_RTL8366_SMI_DEBUG_FS
|
|
struct dentry *debugfs_root;
|
|
u16 dbg_reg;
|
|
u8 dbg_vlan_4k_page;
|
|
#endif
|
|
struct mii_bus *ext_mbus;
|
|
};
|
|
|
|
struct rtl8366_vlan_mc {
|
|
u16 vid;
|
|
u16 untag;
|
|
u16 member;
|
|
u8 fid;
|
|
u8 priority;
|
|
};
|
|
|
|
struct rtl8366_vlan_4k {
|
|
u16 vid;
|
|
u16 untag;
|
|
u16 member;
|
|
u8 fid;
|
|
};
|
|
|
|
struct rtl8366_smi_ops {
|
|
int (*detect)(struct rtl8366_smi *smi);
|
|
int (*reset_chip)(struct rtl8366_smi *smi);
|
|
int (*setup)(struct rtl8366_smi *smi);
|
|
|
|
int (*mii_read)(struct mii_bus *bus, int addr, int reg);
|
|
int (*mii_write)(struct mii_bus *bus, int addr, int reg, u16 val);
|
|
|
|
int (*get_vlan_mc)(struct rtl8366_smi *smi, u32 index,
|
|
struct rtl8366_vlan_mc *vlanmc);
|
|
int (*set_vlan_mc)(struct rtl8366_smi *smi, u32 index,
|
|
const struct rtl8366_vlan_mc *vlanmc);
|
|
int (*get_vlan_4k)(struct rtl8366_smi *smi, u32 vid,
|
|
struct rtl8366_vlan_4k *vlan4k);
|
|
int (*set_vlan_4k)(struct rtl8366_smi *smi,
|
|
const struct rtl8366_vlan_4k *vlan4k);
|
|
int (*get_mc_index)(struct rtl8366_smi *smi, int port, int *val);
|
|
int (*set_mc_index)(struct rtl8366_smi *smi, int port, int index);
|
|
int (*get_mib_counter)(struct rtl8366_smi *smi, int counter,
|
|
int port, unsigned long long *val);
|
|
int (*is_vlan_valid)(struct rtl8366_smi *smi, unsigned vlan);
|
|
int (*enable_vlan)(struct rtl8366_smi *smi, int enable);
|
|
int (*enable_vlan4k)(struct rtl8366_smi *smi, int enable);
|
|
int (*enable_port)(struct rtl8366_smi *smi, int port, int enable);
|
|
};
|
|
|
|
struct rtl8366_smi *rtl8366_smi_alloc(struct device *parent);
|
|
int rtl8366_smi_init(struct rtl8366_smi *smi);
|
|
void rtl8366_smi_cleanup(struct rtl8366_smi *smi);
|
|
int rtl8366_smi_write_reg(struct rtl8366_smi *smi, u32 addr, u32 data);
|
|
int rtl8366_smi_write_reg_noack(struct rtl8366_smi *smi, u32 addr, u32 data);
|
|
int rtl8366_smi_read_reg(struct rtl8366_smi *smi, u32 addr, u32 *data);
|
|
int rtl8366_smi_rmwr(struct rtl8366_smi *smi, u32 addr, u32 mask, u32 data);
|
|
|
|
int rtl8366_reset_vlan(struct rtl8366_smi *smi);
|
|
int rtl8366_enable_vlan(struct rtl8366_smi *smi, int enable);
|
|
int rtl8366_enable_all_ports(struct rtl8366_smi *smi, int enable);
|
|
|
|
#ifdef CONFIG_RTL8366_SMI_DEBUG_FS
|
|
int rtl8366_debugfs_open(struct inode *inode, struct file *file);
|
|
#endif
|
|
|
|
static inline struct rtl8366_smi *sw_to_rtl8366_smi(struct switch_dev *sw)
|
|
{
|
|
return container_of(sw, struct rtl8366_smi, sw_dev);
|
|
}
|
|
|
|
int rtl8366_sw_reset_switch(struct switch_dev *dev);
|
|
int rtl8366_sw_get_port_pvid(struct switch_dev *dev, int port, int *val);
|
|
int rtl8366_sw_set_port_pvid(struct switch_dev *dev, int port, int val);
|
|
int rtl8366_sw_get_port_mib(struct switch_dev *dev,
|
|
const struct switch_attr *attr,
|
|
struct switch_val *val);
|
|
int rtl8366_sw_get_vlan_info(struct switch_dev *dev,
|
|
const struct switch_attr *attr,
|
|
struct switch_val *val);
|
|
int rtl8366_sw_get_vlan_fid(struct switch_dev *dev,
|
|
const struct switch_attr *attr,
|
|
struct switch_val *val);
|
|
int rtl8366_sw_set_vlan_fid(struct switch_dev *dev,
|
|
const struct switch_attr *attr,
|
|
struct switch_val *val);
|
|
int rtl8366_sw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val);
|
|
int rtl8366_sw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val);
|
|
int rtl8366_sw_get_vlan_enable(struct switch_dev *dev,
|
|
const struct switch_attr *attr,
|
|
struct switch_val *val);
|
|
int rtl8366_sw_set_vlan_enable(struct switch_dev *dev,
|
|
const struct switch_attr *attr,
|
|
struct switch_val *val);
|
|
int rtl8366_sw_get_port_stats(struct switch_dev *dev, int port,
|
|
struct switch_port_stats *stats,
|
|
int txb_id, int rxb_id);
|
|
|
|
struct rtl8366_smi* rtl8366_smi_probe(struct platform_device *pdev);
|
|
|
|
#endif /* _RTL8366_SMI_H */
|