openwrt/target/linux/x86
Tomasz Maciej Nowak 55b808e0c4 x86: image: add test module to bootloader
It was previously added in 546fced, which was part of "intel-microcode:
load as early as possible" series.
Unfortunately the conditionals added to GRUB config caused error on boot,
because on sysupgrade, bootloader is not updated and is left with old
features/modules. Since this module is needed for early microcode load
and transition to this needs to be done step by step, enable the test
module now, so that every newly created image has it already embedded.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-02-17 18:22:40 +01:00
..
64 x86: Add support for kernel 4.19 2019-01-12 22:40:36 +01:00
base-files x86: make sysupgrade.tgz reachable again 2018-12-03 07:38:20 +01:00
generic x86: Add support for kernel 4.19 2019-01-12 22:40:36 +01:00
geode x86: Add support for kernel 4.19 2019-01-12 22:40:36 +01:00
image x86: image: add test module to bootloader 2019-02-17 18:22:40 +01:00
legacy x86: Add support for kernel 4.19 2019-01-12 22:40:36 +01:00
patches-4.14 x86: Add support for kernel 4.14 2017-12-16 22:16:07 +01:00
patches-4.19 x86: Add support for kernel 4.19 2019-01-12 22:40:36 +01:00
config-4.14 x86: Refresh kernel 4.14 configuration 2019-01-12 22:40:12 +01:00
config-4.19 x86: Add support for kernel 4.19 2019-01-12 22:40:36 +01:00
Makefile x86: Use kernel 4.14 by default 2018-02-18 19:51:58 +01:00
modules.mk x86: add kernel module for sp5100_tco watchdog 2017-01-16 20:40:13 +01:00