Tobias Welz 816973f42a ramips: enable flashing WizFi630S via OEM firmware ... WIZnet WizFi630s board name is written slightly different it its OEM OpenWrt firmware. This causes an incompatibility warning during flashing with sysupgrade. This patch is adding the vendor board name to the supported devices list to avoid this warning. For initial flashing you can use sysupgrade via command line or luci beside of TFTP. Do not keep the OEM configuration during sysupgrade. Signed-off-by: Tobias Welz <tw@wiznet.eu>		2020-08-05 23:08:03 +02:00
..
base-files/etc	treewide: drop shebang from non-executable target files	2020-06-16 14:26:33 +02:00
dts	ramips: remove doublet entry in WizFi630S dts file	2020-08-05 12:10:15 +02:00
files/drivers	ramips: add arl_table support for MT7530	2020-07-17 11:00:33 +02:00
image	ramips: enable flashing WizFi630S via OEM firmware	2020-08-05 23:08:03 +02:00
mt76x8	ramips: add support for TP-Link RE200 v3	2020-08-03 23:34:34 +02:00
mt7620	ramips: switch MT7620 subtarget to 5.4	2020-07-22 17:20:38 +02:00
mt7621	target: replace remaining occurrences of ifconfig with ip	2020-08-03 10:42:04 +02:00
patches-4.14	kernel: Update kernel 4.14 to version 4.14.187	2020-07-04 21:12:42 +02:00
patches-5.4	kernel: bump 5.4 to 5.4.52	2020-07-17 11:00:33 +02:00
rt288x	ramips: remove default switch setup in 02_network	2020-05-19 19:03:02 +08:00
rt305x	ramips: improve LED support for D-Link DIR-615 D series	2020-07-21 11:59:17 +02:00
rt3883	treewide: drop shebang from non-executable target files	2020-06-16 14:26:33 +02:00
Makefile	ramips: add 5.4 as testing kernel	2020-04-12 22:27:18 +08:00
modules.mk	ramips: fix path for dma-ralink and mtk-hsdma	2020-04-05 18:16:17 +08:00