INAGAKI Hiroshi 5c11258297 ramips: add support for I-O DATA WN-AC733GR3 ... I-O DATA WN-AC733GR3 is a 2.4/5 GHz band 11ac router, based on MediaTek MT7620A. Specification - SoC : MediaTek MT7620A - RAM : DDR2 64 MiB - Flash : SPI-NOR 8 MiB - WLAN : 2.4/5 GHz - 2.4 GHz : MT7620A (SoC), 2T2R - 5 GHz : MT7610E, 1T1R - Ethernet : 10/100/1000 Mbps (RTL8367RB) - LED/key : 4x/4x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J1: Vcc, RX, GND, TX from LED side - 57600n8 Flash instruction using factory image: 1. Boot WN-AC733GR3 normaly 2. Access to "http://192.168.0.1/" and open firmware update page ("ファームウェア") 3. Select the OpenWrt factory image and click update ("更新") button to perform firmware update 4. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>		2019-03-21 00:57:20 +01:00
..
imagebuilder	IB: include SUPPORTED_DEVICES in 'make info' output	2019-03-11 05:32:29 +01:00
linux	ramips: add support for I-O DATA WN-AC733GR3	2019-03-21 00:57:20 +01:00
sdk	sdk: find kernel modules when KDIR is a symlink	2018-11-29 09:36:14 +01:00
toolchain	merge: etc: update remaining files	2017-12-08 19:41:18 +01:00
Config.in	build: add support for enabling the rootfs/boot partition size option via target feature	2018-09-03 12:06:24 +02:00
Makefile	build: make <subdir>/install opt-in, use it for target/ only	2017-02-09 13:51:35 +01:00