52459ebf77
ATF mvebu is required for building a functional bootloader for A7K/A8K and A37xx platforms. uDPU device is added as the first target. A3700 platform has a wide range of settings which can be used per device, so options are defined under the Device sections. Platform also required WTP (recovery) tools and mv-ddr package for the DDR topology configuration. 32-bit cross compiler is used for building the WTMI image. After the build, flash-image.bin can be used with the bubt command from the u-boot shell to flash the new version of u-boot. Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
This is the buildsystem for the OpenWrt Linux distribution.
To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.
You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.
1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default
2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/
3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.
4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.
Sunshine!
Your OpenWrt Community
http://www.openwrt.org