hurricos/openwrt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
481d0281d8
openwrt/target/linux/bcm63xx/image/bcm63xx_nand.mk
Daniel González Cabanelas ff2c96333f bcm63xx: add support for the Sercomm H500-s 
Sercomm H500-s is an xDSL dual band wireless router based on Broadcom
BCM63167 SoC.

Hardware:
   SoC:          Broadcom BCM63167
   CPU:          BMIPS4350 V8.0, 400 MHz, 2 cores
   Flash:        NAND 128 MiB
   RAM:          DDR3 128 MiB
   Ethernet:     4x 10/100/1000 Mbps
   Switch:       BCM53134S
   Wireless:     802.11b/g/n: BCM435f (integrated)
                 802.11ac:    Quantenna QT3740BC (onboard SoC)
   USB:          1x 2.0
   LEDs/Buttons: 11x / 2x

Flash instruction, web UI:
  1. Reset to defaults using the reset button if the admin password is
     unknown
  2. Login into the web UI as admin.
     Address:  http://192.168.0.1
     User:     admin
     Password: VF-ESVodafone-H-500-s or l033i-h500s
  3. Go to Settings -> Firmware Update, and select the Openwrt factory
     firmware
  4. Update the firmware.
  5. Wait until it finish, the device will reboot with Openwrt installed
     on the alternative image partitions keeping the stock firmware in
     the former.

Notes:
  - The patch also adds support for the lowi version. Only the factory
    firmware is different.
  - The integrated Wifi in the Broadcom Soc isn't still supported.
  - The Quantenna 802.11ac wifi works ok, but needs to be configured with
    the Quantenna client application. It can't be configured with Luci
    nor any iw command since it's a separated subsystem linked via
    ethernet.
  - The BCM53134S external switch is managed via MDIO which isn't
    supported in this target. Therefore it will behave as a dumb switch.

Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
2020-06-07 20:26:17 +02:00

206 lines
6.3 KiB
Makefile
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#
# BCM63XX NAND Profiles
#
DEVICE_VARS += CFE_PART_FLAGS CFE_PART_ID
DEVICE_VARS += CFE_RAM_FILE
DEVICE_VARS += CFE_RAM_JFFS2_NAME CFE_RAM_JFFS2_PAD
DEVICE_VARS += CFE_WFI_CHIP_ID CFE_WFI_FLASH_TYPE
DEVICE_VARS += CFE_WFI_FLAGS CFE_WFI_VERSION
DEVICE_VARS += SERCOMM_PID SERCOMM_VERSION
# CFE expects a single JFFS2 partition with cferam and kernel. However,
# it's possible to fool CFE into properly loading both cferam and kernel
# from two different JFFS2 partitions by adding dummy files (see
# cfe-jffs2-cferam and cfe-jffs2-kernel).
# Separate JFFS2 partitions allow upgrading openwrt without reflashing cferam
# JFFS2 partition, which is much safer in case anything goes wrong.
define Device/bcm63xx-nand
FILESYSTEMS := squashfs ubifs
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | cfe-jffs2-kernel
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-lzma elf
IMAGES := cfe.bin sysupgrade.bin
IMAGE/cfe.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | cfe-jffs2-cferam | append-ubi | cfe-wfi-tag
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
KERNEL_SIZE := 5120k
CFE_PART_FLAGS :=
CFE_PART_ID :=
CFE_RAM_FILE :=
CFE_RAM_JFFS2_NAME :=
CFE_RAM_JFFS2_PAD :=
CFE_WFI_VERSION :=
CFE_WFI_CHIP_ID = 0x$$(CHIP_ID)
CFE_WFI_FLASH_TYPE :=
CFE_WFI_FLAGS :=
UBINIZE_OPTS := -E 5
DEVICE_PACKAGES += nand-utils
SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
endef
define Device/sercomm-nand
$(Device/bcm63xx-nand)
IMAGES := factory.img sysupgrade.bin
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | cfe-sercomm-part | gzip | cfe-sercomm-load | cfe-sercomm-crypto
SERCOM_PID :=
SERCOMM_VERSION :=
endef
### Comtrend ###
define Device/comtrend_vg-8050
$(Device/bcm63xx-nand)
DEVICE_VENDOR := Comtrend
DEVICE_MODEL := VG-8050
CHIP_ID := 63268
SOC := bcm63169
CFE_RAM_FILE := comtrend,vg-8050/cferam.000
CFE_RAM_JFFS2_NAME := cferam.000
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
VID_HDR_OFFSET := 2048
DEVICE_PACKAGES += $(USB2_PACKAGES)
CFE_WFI_VERSION := 0x5732
CFE_WFI_FLASH_TYPE := 3
endef
TARGET_DEVICES += comtrend_vg-8050
define Device/comtrend_vr-3032u
$(Device/bcm63xx-nand)
DEVICE_VENDOR := Comtrend
DEVICE_MODEL := VR-3032u
CHIP_ID := 63268
SOC := bcm63168
CFE_RAM_FILE := comtrend,vr-3032u/cferam.000
CFE_RAM_JFFS2_NAME := cferam.000
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
VID_HDR_OFFSET := 2048
DEVICE_PACKAGES += $(USB2_PACKAGES)
CFE_WFI_VERSION := 0x5732
CFE_WFI_FLASH_TYPE := 3
endef
TARGET_DEVICES += comtrend_vr-3032u
### Huawei ###
define Device/huawei_hg253s-v2
$(Device/bcm63xx-nand)
IMAGES := flash.bin sysupgrade.bin
IMAGE/flash.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | cfe-jffs2-cferam | append-ubi
DEVICE_VENDOR := Huawei
DEVICE_MODEL := HG253s
DEVICE_VARIANT := v2
CHIP_ID := 6362
CFE_PART_FLAGS := 1
CFE_PART_ID := 0x0001EFEE
CFE_RAM_FILE := huawei,hg253s-v2/cferam.000
CFE_RAM_JFFS2_NAME := cferam.000
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
VID_HDR_OFFSET := 2048
DEVICE_PACKAGES += $(USB2_PACKAGES)
CFE_WFI_FLASH_TYPE := 3
endef
TARGET_DEVICES += huawei_hg253s-v2
### Netgear ###
define Device/netgear_dgnd3700-v2
$(Device/bcm63xx-nand)
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := DGND3700
DEVICE_VARIANT := v2
CHIP_ID := 6362
CFE_RAM_FILE := netgear,dgnd3700-v2/cferam
CFE_RAM_JFFS2_NAME := cferam
CFE_RAM_JFFS2_PAD := 496k
BLOCKSIZE := 16k
PAGESIZE := 512
DEVICE_PACKAGES += $(B43_PACKAGES) $(USB2_PACKAGES)
CFE_WFI_VERSION := 0x5731
CFE_WFI_FLASH_TYPE := 2
endef
TARGET_DEVICES += netgear_dgnd3700-v2
### Sercomm ###
define Device/sercomm_ad1018
$(Device/sercomm-nand)
DEVICE_VENDOR := Sercomm
DEVICE_MODEL := AD1018
CHIP_ID := 6328
CFE_RAM_FILE := sercomm,ad1018/cferam
CFE_RAM_JFFS2_NAME := cferam
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
VID_HDR_OFFSET := 2048
DEVICE_PACKAGES += $(B43_PACKAGES) $(USB2_PACKAGES)
CFE_WFI_FLASH_TYPE := 3
CFE_WFI_VERSION := 0x5731
SERCOMM_PID := \
30 30 30 30 30 30 30 31 34 31 35 31 35 33 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 33 30 31 33 30 30 30 30 30 30 30 30 \
0D 0A 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SERCOMM_VERSION := 1001
endef
TARGET_DEVICES += sercomm_ad1018
define Device/sercomm_h500-s-lowi
$(Device/sercomm-nand)
DEVICE_VENDOR := Sercomm
DEVICE_MODEL := H500-s
DEVICE_VARIANT := lowi
DEVICE_LOADADDR := $(KERNEL_LOADADDR)
KERNEL := kernel-bin | append-dtb | lzma | cfe-jffs2-kernel
CHIP_ID := 63268
SOC := bcm63167
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
VID_HDR_OFFSET := 2048
DEVICE_PACKAGES += $(USB2_PACKAGES)
SERCOMM_PID := \
30 30 30 30 30 30 30 31 34 33 34 62 33 31 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 33 33 30 35 30 30 30 30 30 30 30 30 \
0D 0A 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SERCOMM_VERSION := 1001
endef
TARGET_DEVICES += sercomm_h500-s-lowi
define Device/sercomm_h500-s-vfes
$(Device/sercomm-nand)
DEVICE_VENDOR := Sercomm
DEVICE_MODEL := H500-s
DEVICE_VARIANT := vfes
DEVICE_LOADADDR := $(KERNEL_LOADADDR)
KERNEL := kernel-bin | append-dtb | lzma | cfe-jffs2-kernel
CHIP_ID := 63268
SOC := bcm63167
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
VID_HDR_OFFSET := 2048
DEVICE_PACKAGES += $(USB2_PACKAGES)
SERCOMM_PID := \
30 30 30 30 30 30 30 31 34 32 35 38 34 62 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 33 34 31 37 30 30 30 30 30 30 30 30 \
0D 0A 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SERCOMM_VERSION := 1001
endef
TARGET_DEVICES += sercomm_h500-s-vfes
Reference in New Issue View Git Blame Copy Permalink