d2b8ccb1c0
Hardware
--------
SoC: Atheros AR7161
RAM: Samsung K4H511638D-UCCC
2x 64M DDR1
SPI: Micron M25P128 (16M)
WiFi: Atheros AR9160 bgn
Atheros AR9160 an
ETH: Broadcom BCM5481
LED: Power (Green/Red)
ETH (Green / Blue / Yellow)
(PHY-controlled)
WiFi 5 (Green / Blue)
WiFi 2 (Green / Blue)
BTN: Reset
Serial: Cisco-Style RJ45 - 115200 8N1
Installation
------------
1. Download the OpenWrt initramfs-image. Place it into a TFTP server
root directory and rename it to 1401A8C0.img. Configure the TFTP
server to listen at 192.168.1.66/24.
2. Connect the TFTP server to the access point.
3. Connect to the serial console of the access point. Attach power and
interrupt the boot procedure when prompted (bootdelay is 1 second).
4. Configure the U-Boot environment for booting OpenWrt from Ram and
flash:
$ setenv boot_openwrt 'setenv bootargs; bootm 0xbf080000'
$ setenv ramboot_openwrt 'setenv serverip 192.168.1.66;
tftpboot; bootm'
$ saveenv
5. Load OpenWrt into memory:
$ run ramboot_openwrt
Wait for the image to boot.
6. Transfer the OpenWrt sysupgrade image to the device. Write the image
to flash using sysupgrade:
$ sysupgrade -n /path/to/openwrt-sysuograde.bin
Signed-off-by: David Bauer <mail@david-bauer.net>
24 lines
557 B
Plaintext
24 lines
557 B
Plaintext
CONFIG_AT803X_PHY=y
|
|
CONFIG_BROADCOM_PHY=y
|
|
CONFIG_GPIO_WATCHDOG=y
|
|
CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
|
|
CONFIG_INTEL_XWAY_PHY=y
|
|
CONFIG_IP17XX_PHY=y
|
|
CONFIG_LEDS_RESET=y
|
|
CONFIG_MARVELL_PHY=y
|
|
CONFIG_MICREL_PHY=y
|
|
CONFIG_MTD_REDBOOT_PARTS=y
|
|
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3
|
|
CONFIG_MTD_SPLIT_EVA_FW=y
|
|
CONFIG_MTD_SPLIT_MINOR_FW=y
|
|
CONFIG_PHY_AR7100_USB=y
|
|
CONFIG_PHY_AR7200_USB=y
|
|
CONFIG_REGULATOR=y
|
|
CONFIG_REGULATOR_FIXED_VOLTAGE=y
|
|
CONFIG_RTL8366RB_PHY=y
|
|
CONFIG_RTL8366S_PHY=y
|
|
CONFIG_RTL8366_SMI=y
|
|
CONFIG_RTL8367_PHY=y
|
|
CONFIG_VITESSE_PHY=y
|
|
CONFIG_WATCHDOG_CORE=y
|