Daniel Dickinson
|
fe5d55977e
|
tools/firmware-utils/imagetag: Fixed Pirelli Alice Gate CRC calculation in imagetag (was invalid strings in bcm_tag.h). Closes #7120
SVN-Revision: 20850
|
2010-04-14 00:45:48 +00:00 |
|
Florian Fainelli
|
2a4fb82289
|
flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore.
SVN-Revision: 20652
|
2010-04-01 21:20:43 +00:00 |
|
Florian Fainelli
|
dad85cddac
|
move bcm_tag.h out of the flashmap patch so that user-land tools can re-use it
SVN-Revision: 20548
|
2010-03-28 18:11:06 +00:00 |
|
Florian Fainelli
|
b8d99458ff
|
move files to files-2.6.30, to ease newer kernel integration
SVN-Revision: 19471
|
2010-01-31 21:00:50 +00:00 |
|
Daniel Dickinson
|
022594b0ed
|
brcm63xx: Fix gpio-buttons and add LED and buttons for Tecom IGW6200 and Comtrend CT-5261
SVN-Revision: 19361
|
2010-01-28 16:54:00 +00:00 |
|
Daniel Dickinson
|
f623119680
|
Fix typo in AGPF_S0 reset button definition
SVN-Revision: 19160
|
2010-01-16 03:13:56 +00:00 |
|
Claudio Mignanti
|
b031e14bf0
|
bcm63xx: add gpio leds to alice gate
SVN-Revision: 19152
|
2010-01-15 13:30:46 +00:00 |
|
Florian Fainelli
|
0adbdf6409
|
add support for the RTA1025W_16 board (#5979)
SVN-Revision: 18476
|
2009-11-22 14:53:20 +00:00 |
|
Nicolas Thill
|
f22156bf9e
|
brcm63xx: fix cardbus support with BCM6358 (closes: #5918)
SVN-Revision: 17935
|
2009-10-05 20:40:05 +00:00 |
|
Florian Fainelli
|
b9c0291e32
|
prevent gpio-buttons registration failure
SVN-Revision: 17542
|
2009-09-08 15:24:06 +00:00 |
|
Florian Fainelli
|
8ceff55a08
|
fix typos against the gpio buttons driver (#5804)
SVN-Revision: 17538
|
2009-09-07 18:17:45 +00:00 |
|
Florian Fainelli
|
65fa1debda
|
add infrastructure to register gpio-input reset button
SVN-Revision: 17526
|
2009-09-06 13:54:17 +00:00 |
|
Florian Fainelli
|
294ec33e47
|
fix reboot hang on bcm6345, thanks AndyI
SVN-Revision: 17465
|
2009-09-02 08:32:00 +00:00 |
|
Florian Fainelli
|
3fd180eb53
|
add missing patch which fakes a cardbus controller on top of PCI, thanks SGDA
SVN-Revision: 17234
|
2009-08-12 08:41:47 +00:00 |
|
Florian Fainelli
|
dd8b0f9fb9
|
more bcm63xx definition fixes, thanks AndyI
SVN-Revision: 17227
|
2009-08-11 18:50:07 +00:00 |
|
Florian Fainelli
|
85698765da
|
add support for the Pirelli AG226G board (#5337)
SVN-Revision: 17190
|
2009-08-09 10:19:47 +00:00 |
|
Florian Fainelli
|
5138aa203e
|
bcm6345 fixes from AndyI
SVN-Revision: 17153
|
2009-08-06 20:33:42 +00:00 |
|
Florian Fainelli
|
48c1634d3e
|
fix off-by-one maximum timeout in the wathchdog default counter for bcm6345, thanks AndyI
SVN-Revision: 17149
|
2009-08-06 18:53:44 +00:00 |
|
Florian Fainelli
|
dd78f746a5
|
disable watchdog for bcm6345 until it gets fixed
SVN-Revision: 17148
|
2009-08-06 18:44:20 +00:00 |
|
Florian Fainelli
|
e58d0f346d
|
more bcm6345 fixes and definitions, thanks to AndyI
SVN-Revision: 17066
|
2009-07-31 20:15:43 +00:00 |
|
Florian Fainelli
|
9887dc6100
|
add experimental support for 2.6.28.10, tested on bcm6338
SVN-Revision: 17054
|
2009-07-30 21:29:25 +00:00 |
|
Florian Fainelli
|
dabf5e71a6
|
fix typo for the flash start address on bcm6345
SVN-Revision: 17032
|
2009-07-27 22:31:28 +00:00 |
|
Florian Fainelli
|
ecad504c39
|
register GPIO-connected LEDs for known boards
SVN-Revision: 16887
|
2009-07-18 00:40:23 +00:00 |
|
Florian Fainelli
|
d0fdf2c5ed
|
fix comment only valid for bcm6345
SVN-Revision: 16881
|
2009-07-17 15:57:09 +00:00 |
|
Florian Fainelli
|
0bda624fc7
|
add the infrastructure to use a MPI/GPIO connected VoIP DSP
SVN-Revision: 16650
|
2009-07-01 21:00:41 +00:00 |
|
Florian Fainelli
|
8a8943671a
|
fixes for the bcm6338 clocks, thanks Maxime
SVN-Revision: 16640
|
2009-07-01 13:49:20 +00:00 |
|
Florian Fainelli
|
5a7c5b2d36
|
a couple of more fixes to get 6345 booting up to the console handover
SVN-Revision: 16636
|
2009-06-30 13:45:49 +00:00 |
|
Florian Fainelli
|
8179904540
|
shared DMA zone is twice smaller on 6338
SVN-Revision: 16608
|
2009-06-28 20:06:44 +00:00 |
|
Florian Fainelli
|
8813961e86
|
bcm6338 can support PCI since it has MPI
SVN-Revision: 16592
|
2009-06-27 21:43:55 +00:00 |
|
Florian Fainelli
|
ca5de76ed3
|
more fixes for bcm6338, no need not to prevent reads from MPI registers now that we have it defined correctly
SVN-Revision: 16589
|
2009-06-27 20:32:43 +00:00 |
|
Florian Fainelli
|
d02d75ba02
|
fix the flash address comment and register the flash device again with its proper physical address on 6338/6345
SVN-Revision: 16587
|
2009-06-27 18:58:00 +00:00 |
|
Florian Fainelli
|
0bb3a46217
|
fix a stupid typo preventing the board from being detected
SVN-Revision: 16586
|
2009-06-27 18:30:45 +00:00 |
|
Florian Fainelli
|
bcc1dd7f99
|
prevent bcm6338 and bcm6345 from crashing very early
SVN-Revision: 16585
|
2009-06-27 18:23:58 +00:00 |
|
Florian Fainelli
|
7da8855c79
|
only register fallback sprom and enable PCI if we actually have support for PCI
SVN-Revision: 16581
|
2009-06-27 16:17:18 +00:00 |
|
Florian Fainelli
|
13a8ed9ca0
|
more missing register definitions for bcm6338
SVN-Revision: 16579
|
2009-06-27 15:51:27 +00:00 |
|
Florian Fainelli
|
287a2c0ba9
|
more bcm6338 and bcm6345 related fixes
SVN-Revision: 16568
|
2009-06-26 12:34:35 +00:00 |
|
Florian Fainelli
|
8c4137900c
|
define bcm6338 SDRAM base register and make sure that the right CPU id will be used to detect a bcm6338
SVN-Revision: 16567
|
2009-06-26 11:08:12 +00:00 |
|
Florian Fainelli
|
e86e91380a
|
add board definitions for the bcm6338w
SVN-Revision: 16565
|
2009-06-26 10:27:13 +00:00 |
|
Florian Fainelli
|
287a0efd68
|
be SMP safe even with gpiolib
SVN-Revision: 16331
|
2009-06-04 10:02:23 +00:00 |
|
Florian Fainelli
|
9013e936ed
|
cache gpio values in gpio_set
SVN-Revision: 16330
|
2009-06-04 10:01:55 +00:00 |
|
Florian Fainelli
|
1208ffaedb
|
use the correct number of GPIOs for bcm6358
SVN-Revision: 16329
|
2009-06-04 10:01:03 +00:00 |
|
Florian Fainelli
|
c95420f06d
|
register gpiochip earlier, allowing gpio-based runtime detection to be performed in board_init callback
SVN-Revision: 16328
|
2009-06-04 09:59:28 +00:00 |
|
Florian Fainelli
|
9485c3e834
|
register gpiodev
SVN-Revision: 15509
|
2009-04-30 14:09:01 +00:00 |
|
Florian Fainelli
|
501ebb4f74
|
enable all blocks on 6338 and uart clock on 6345
SVN-Revision: 14957
|
2009-03-21 10:50:44 +00:00 |
|
Florian Fainelli
|
0972ee5331
|
add support for bcm6345 SoC, needs testing
SVN-Revision: 14953
|
2009-03-20 15:08:02 +00:00 |
|
Florian Fainelli
|
32c29f1aaf
|
fix SPI register switch and prepare for UDC, thanks to Henk Vergonet (#4783)
SVN-Revision: 14914
|
2009-03-17 11:28:54 +00:00 |
|
Florian Fainelli
|
6495fa36ea
|
add support for AGPF-S0 (Pirelli Alice Gate VoIP 2 Plus Wi-Fi) #4366
SVN-Revision: 14850
|
2009-03-12 08:54:04 +00:00 |
|
Florian Fainelli
|
8065eb4a55
|
do not duplicate fifo_size, since RX and TX fifo sizes are the same, request_mem_region on the registers
SVN-Revision: 14848
|
2009-03-11 10:32:44 +00:00 |
|
Florian Fainelli
|
1bcf5d0de6
|
fix typo for the bcm6338 spi IRQ, change platform driver name and make the SPI irq be fetchable by platform driver initialization code
SVN-Revision: 14790
|
2009-03-08 12:43:13 +00:00 |
|
Florian Fainelli
|
bf7f2939c2
|
compile and register SPI controller device
SVN-Revision: 14789
|
2009-03-08 12:18:26 +00:00 |
|