mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2025-11-02 22:14:26 -05:00
ea8d140b25
Buffalo WSR-2533DHPLS is a 2.4/5 GHz band 11ac router, based on MediaTek
MT7621A.
Very similar to Buffalo WSR-2533DHPL, but with NAND, different GPIO
and TRX partitions.
Specification:
- SoC : MediaTek MT7621AT
- RAM : DDR3 256 MiB (Samsung K4B2G1646F-BYMA)
- Flash : RAW-NAND 128 MiB
(Winbond W29N01HV or KIOXIA TC58BVG0S3HTAI0)
- WLAN : 2.4/5 GHz (2x MediaTek MT7615N)
- Ethernet : 10/100/1000 Mbps
- Switch : MediaTek MT7530 (SoC) 4 ports
- LED/keys : 8x/6x (2x buttons, 1x slide-switch)
- UART : through-hole on PCB (J4)
- arrangement : 3.3V, GND, TX, RX from triangle-mark
- settings : 115200n8
- Power : 12VDC 1.5A
Flash instruction using factory.bin image:
1. boot WSR-2533DHPLS normally with "Router" mode
2. access to the WebI ("http://192.168.11.1/") on the device and open
firmware update page
("管理" -> "ファームウェア更新")
3. select the OpenWrt factory.bin image and click update ("更新実行")
button
Attention: do not use "factory-uboot.bin" image
4. Wait ~120 seconds to complete flashing
Flash instruction using initramfs image:
1. prepare the TFTP server with the initramfs image renamed to
"linux.trx-recovery" and IP address "192.168.11.2"
2. press the "AOSS" button while powering on the WSR-2533DHPLS
3. after 10 seconds, release the "AOSS" button, WSR-2533DHPLS downloads
the initramfs image and boot with it automatically
4. on the initramfs image, download the factory-uboot.bin image to the
device and perform sysupgrade with it and "-F" option
5. wait ~120 seconds to complete flashing
Notes:
- The embedded addresses in eeprom data in Factory partition have
Buffalo's OUI, but they don't match with the actual addresses
assigned to wlan devices. So fixup addresses by the user-space
script.
root@localhost:/# hexdump -C /dev/mtdblock3 | grep "^0000[08]000\s"
00000000 15 76 a0 00 88 57 ee bc 01 a8 15 76 c3 14 00 80 |.v...W.....v....|
00008000 15 76 a0 00 88 57 ee bc 01 f8 15 76 c3 14 00 80 |.v...W.....v....|
See "MAC addresses" below for actual addresses.
- There are 2x factory*.bin images for different purposes.
- factory.bin : for flashing on OEM WebUI
- factory-uboot.bin: for flashing on OEM bootloader or initramfs image
factory-uboot.bin is useful for recoverying the device, or refreshing
when the kernel partition is expanded in the future. sysupgrade on
this device accepts factory-uboot.bin with option "-F", but on that
situation, user configurations won't be kept, so it's not for normal
use.
MAC addresses:
LAN : 90:96:F3:xx:xx:30 (board_data, "mac" (text))
WAN : 90:96:F3:xx:xx:30 (board_data, "mac" (text))
2.4 GHz: 90:96:F3:xx:xx:31
5 GHz : 90:96:F3:xx:xx:38
[original work]
Signed-off-by: Audun-Marius Gangstø <audun@gangsto.org>
[convert to ubi, fix/improve DT, add sysupgrade support]
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
83 lines
1.4 KiB
Plaintext
83 lines
1.4 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "mt7621_buffalo_wsr-2533dhplx.dtsi"
|
|
|
|
/ {
|
|
compatible = "buffalo,wsr-2533dhpls", "mediatek,mt7621-soc";
|
|
model = "Buffalo WSR-2533DHPLS";
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,115200n8 ubi.block=0,rootfs root=/dev/ubiblock0_0";
|
|
};
|
|
};
|
|
|
|
&nand {
|
|
status = "okay";
|
|
|
|
mediatek,nmbm;
|
|
/*
|
|
* - u-boot - (kernel (6MiB, in "firmware"))
|
|
* - Kernel2 - WTB
|
|
*/
|
|
mediatek,bmt-remap-range = <0x0 0x780000>,
|
|
<0x1980000 0x5b00000>;
|
|
};
|
|
|
|
&partitions {
|
|
partition@100000 {
|
|
label = "factory";
|
|
reg = <0x100000 0x80000>;
|
|
read-only;
|
|
|
|
nvmem-layout {
|
|
compatible = "fixed-layout";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
eeprom_factory_0: eeprom@0 {
|
|
reg = <0x0 0x4da8>;
|
|
};
|
|
|
|
eeprom_factory_8000: eeprom@8000 {
|
|
reg = <0x8000 0x4da8>;
|
|
};
|
|
};
|
|
};
|
|
|
|
partition@180000 {
|
|
compatible = "brcm,trx";
|
|
brcm,trx-magic = <0x534c4844>;
|
|
label = "firmware";
|
|
reg = <0x180000 0x1800000>;
|
|
};
|
|
|
|
partition@1980000 {
|
|
label = "Kernel2";
|
|
reg = <0x1980000 0x1800000>;
|
|
};
|
|
|
|
partition@3180000 {
|
|
label = "glbcfg";
|
|
reg = <0x3180000 0x200000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@3380000 {
|
|
label = "board_data";
|
|
reg = <0x3380000 0x200000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@3580000 {
|
|
label = "debug_log";
|
|
reg = <0x3580000 0x900000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@3e80000 {
|
|
label = "WTB";
|
|
reg = <0x3e80000 0x3600000>;
|
|
read-only;
|
|
};
|
|
};
|