David Bauer fcd247d02b ath79: add correct phy-mode for QCA9563 boards ... The TP-Link RE450 as well as the UniFi AC series missed the phy-mode property. Because of this, the incorrect MII phy-mode from the root dtsi was used. With Kernel 5.4, this leads to problems when used with a AR8033 PHY. The bootloader seems to leave the fiber pages selected. As there's not switch to copper pages happening in at803x_config_init due to the incorrect phy-mode, the new at803x_read_status will interpret the status of the SGMII side as the status of the copper side. Signed-off-by: David Bauer <mail@david-bauer.net>		2020-03-15 00:08:14 +01:00
..
base-files	ath79: move mikrotik-caldata.sh to target base-files	2020-02-17 20:23:59 +01:00
dts	ath79: add correct phy-mode for QCA9563 boards	2020-03-15 00:08:14 +01:00
files	ath79: use downstream ag71xx for Kernel 5.4	2020-03-13 20:43:57 +01:00
generic	ath79: fix port order on TP-Link Archer C60 v1/v2	2020-03-11 16:09:16 +01:00
image	kernel: make kmod-i2c-core selected by dependent modules	2020-03-13 15:40:43 +01:00
nand	ath79: add back NAND symbols to NAND target	2020-03-12 20:27:36 +01:00
patches-4.19	kernel: bump 4.19 to 4.19.106	2020-02-24 19:11:36 +01:00
patches-5.4	ath79: use downstream ag71xx for Kernel 5.4	2020-03-13 20:43:57 +01:00
tiny	ath79: add support for TP-Link TL-WR740N v5	2020-03-13 13:53:12 +01:00
config-4.19	ath79: add new ar934x spi driver	2020-02-06 22:53:03 +08:00
config-5.4	ath79: use downstream ag71xx for Kernel 5.4	2020-03-13 20:43:57 +01:00
Makefile	ath79: add support for kernel 5.4	2020-02-28 17:50:46 +01:00
modules.mk	ath79: add new OF only target for QCA MIPS silicon	2018-05-07 08:06:51 +02:00