David Bauer fbbad9a9a6 ath79: force SGMII SerDes mode to MAC operation ... The mode on the SGMII SerDes on the QCA9563 is 1000 Base-X by default. This only allows for 1000 Mbit/s links, however when used with an SGMII PHY in 100 Mbit/s link mode, the link remains dead. This strictly has nothing to do with the SerDes calibration, however it is done at the same point in the QCA reference U-Boot which is the blueprint for everything happening here. As the current state is more or less a hack, this should be fine. This fixes the issues outlined above on a TP-Link EAP-225 Outdoor. Reported-by: Tom Herbers <freifunk@tomherbers.de> Tested-by: Tom Herbers <freifunk@tomherbers.de> Signed-off-by: David Bauer <mail@david-bauer.net>		2021-04-13 00:32:56 +02:00
..
base-files/etc/hotplug.d/ieee80211	ath79: add WiFi migration for AR913x	2020-09-28 16:23:03 +02:00
dts	ath79: mikrotik: enable 2nd USB on RouterBOARD 922UAGS-5HPacD	2021-04-12 13:18:30 +02:00
files	ath79: force SGMII SerDes mode to MAC operation	2021-04-13 00:32:56 +02:00
generic	ath79: consolidate testing kernel	2021-04-10 19:28:04 +02:00
image	ath79: add factory.bin for ALLNET ALL-WAP02860AC	2021-04-08 09:20:59 +02:00
mikrotik	ath79: consolidate testing kernel	2021-04-10 19:28:04 +02:00
nand	ath79: consolidate testing kernel	2021-04-10 19:28:04 +02:00
patches-5.4	ath79: force SGMII SerDes mode to MAC operation	2021-04-13 00:32:56 +02:00
patches-5.10	kernel: backport 5.13 mtd partitioning changes	2021-03-29 08:46:17 +02:00
tiny	ath79: consolidate testing kernel	2021-04-10 19:28:04 +02:00
config-5.4	ath79: enable Regulator support for target	2021-02-22 00:57:25 +01:00
config-5.10	ath79: enable AT803X PHY for kernel 5.10	2021-03-05 00:03:57 +01:00
Makefile	ath79: consolidate testing kernel	2021-04-10 19:28:04 +02:00
modules.mk