mirror of
				git://git.openwrt.org/openwrt/openwrt.git
				synced 2025-11-03 14:34:27 -05:00 
			
		
		
		
	This patch is rather a cosmetic patch. It fixes the following issues: * Demote the unknown device message to debug level to not spam the log. * Fix the version print of the unknown device message. * Output the 'attach' message only when attaching as switch driver, not when attaching as phy driver. * Correctly return NET_RX_DROP when dropping packets. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> Cc: bacfire@openwrt.org SVN-Revision: 20773
		
			
				
	
	
		
			840 lines
		
	
	
		
			19 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			840 lines
		
	
	
		
			19 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * ar8216.c: AR8216 switch driver
 | 
						|
 *
 | 
						|
 * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
 | 
						|
 *
 | 
						|
 * This program is free software; you can redistribute it and/or
 | 
						|
 * modify it under the terms of the GNU General Public License
 | 
						|
 * as published by the Free Software Foundation; either version 2
 | 
						|
 * of the License, or (at your option) any later version.
 | 
						|
 *
 | 
						|
 * This program is distributed in the hope that it will be useful,
 | 
						|
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 | 
						|
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 | 
						|
 * GNU General Public License for more details.
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/if.h>
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/init.h>
 | 
						|
#include <linux/list.h>
 | 
						|
#include <linux/if_ether.h>
 | 
						|
#include <linux/skbuff.h>
 | 
						|
#include <linux/netdevice.h>
 | 
						|
#include <linux/netlink.h>
 | 
						|
#include <linux/bitops.h>
 | 
						|
#include <net/genetlink.h>
 | 
						|
#include <linux/switch.h>
 | 
						|
#include <linux/delay.h>
 | 
						|
#include <linux/phy.h>
 | 
						|
#include <linux/netdevice.h>
 | 
						|
#include <linux/etherdevice.h>
 | 
						|
#include "ar8216.h"
 | 
						|
 | 
						|
/* size of the vlan table */
 | 
						|
#define AR8X16_MAX_VLANS	128
 | 
						|
#define AR8X16_PROBE_RETRIES	10
 | 
						|
 | 
						|
struct ar8216_priv {
 | 
						|
	struct switch_dev dev;
 | 
						|
	struct phy_device *phy;
 | 
						|
	u32 (*read)(struct ar8216_priv *priv, int reg);
 | 
						|
	void (*write)(struct ar8216_priv *priv, int reg, u32 val);
 | 
						|
	const struct net_device_ops *ndo_old;
 | 
						|
	struct net_device_ops ndo;
 | 
						|
	struct mutex reg_mutex;
 | 
						|
	int chip;
 | 
						|
 | 
						|
	/* all fields below are cleared on reset */
 | 
						|
	bool vlan;
 | 
						|
	u16 vlan_id[AR8X16_MAX_VLANS];
 | 
						|
	u8 vlan_table[AR8X16_MAX_VLANS];
 | 
						|
	u8 vlan_tagged;
 | 
						|
	u16 pvid[AR8216_NUM_PORTS];
 | 
						|
};
 | 
						|
static struct switch_dev athdev;
 | 
						|
 | 
						|
#define to_ar8216(_dev) container_of(_dev, struct ar8216_priv, dev)
 | 
						|
 | 
						|
static inline void
 | 
						|
split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
 | 
						|
{
 | 
						|
	regaddr >>= 1;
 | 
						|
	*r1 = regaddr & 0x1e;
 | 
						|
 | 
						|
	regaddr >>= 5;
 | 
						|
	*r2 = regaddr & 0x7;
 | 
						|
 | 
						|
	regaddr >>= 3;
 | 
						|
	*page = regaddr & 0x1ff;
 | 
						|
}
 | 
						|
 | 
						|
static u32
 | 
						|
ar8216_mii_read(struct ar8216_priv *priv, int reg)
 | 
						|
{
 | 
						|
	struct phy_device *phy = priv->phy;
 | 
						|
	u16 r1, r2, page;
 | 
						|
	u16 lo, hi;
 | 
						|
 | 
						|
	split_addr((u32) reg, &r1, &r2, &page);
 | 
						|
	phy->bus->write(phy->bus, 0x18, 0, page);
 | 
						|
	msleep(1); /* wait for the page switch to propagate */
 | 
						|
	lo = phy->bus->read(phy->bus, 0x10 | r2, r1);
 | 
						|
	hi = phy->bus->read(phy->bus, 0x10 | r2, r1 + 1);
 | 
						|
 | 
						|
	return (hi << 16) | lo;
 | 
						|
}
 | 
						|
 | 
						|
static void
 | 
						|
ar8216_mii_write(struct ar8216_priv *priv, int reg, u32 val)
 | 
						|
{
 | 
						|
	struct phy_device *phy = priv->phy;
 | 
						|
	u16 r1, r2, r3;
 | 
						|
	u16 lo, hi;
 | 
						|
 | 
						|
	split_addr((u32) reg, &r1, &r2, &r3);
 | 
						|
	phy->bus->write(phy->bus, 0x18, 0, r3);
 | 
						|
	msleep(1); /* wait for the page switch to propagate */
 | 
						|
 | 
						|
	lo = val & 0xffff;
 | 
						|
	hi = (u16) (val >> 16);
 | 
						|
	phy->bus->write(phy->bus, 0x10 | r2, r1 + 1, hi);
 | 
						|
	phy->bus->write(phy->bus, 0x10 | r2, r1, lo);
 | 
						|
}
 | 
						|
 | 
						|
static u32
 | 
						|
ar8216_rmw(struct ar8216_priv *priv, int reg, u32 mask, u32 val)
 | 
						|
{
 | 
						|
	u32 v;
 | 
						|
 | 
						|
	v = priv->read(priv, reg);
 | 
						|
	v &= ~mask;
 | 
						|
	v |= val;
 | 
						|
	priv->write(priv, reg, v);
 | 
						|
 | 
						|
	return v;
 | 
						|
}
 | 
						|
 | 
						|
static inline int
 | 
						|
ar8216_id_chip(struct ar8216_priv *priv)
 | 
						|
{
 | 
						|
	u32 val;
 | 
						|
	u16 id;
 | 
						|
	int i;
 | 
						|
 | 
						|
	val = ar8216_mii_read(priv, AR8216_REG_CTRL);
 | 
						|
	if (val == ~0)
 | 
						|
		return UNKNOWN;
 | 
						|
 | 
						|
	id = val & (AR8216_CTRL_REVISION | AR8216_CTRL_VERSION);
 | 
						|
	for (i = 0; i < AR8X16_PROBE_RETRIES; i++) {
 | 
						|
		u16 t;
 | 
						|
 | 
						|
		val = ar8216_mii_read(priv, AR8216_REG_CTRL);
 | 
						|
		if (val == ~0)
 | 
						|
			return UNKNOWN;
 | 
						|
 | 
						|
		t = val & (AR8216_CTRL_REVISION | AR8216_CTRL_VERSION);
 | 
						|
		if (t != id)
 | 
						|
			return UNKNOWN;
 | 
						|
	}
 | 
						|
 | 
						|
	switch (id) {
 | 
						|
	case 0x0101:
 | 
						|
		return AR8216;
 | 
						|
	case 0x1001:
 | 
						|
		return AR8316;
 | 
						|
	default:
 | 
						|
		printk(KERN_DEBUG
 | 
						|
			"ar8216: Unknown Atheros device [ver=%d, rev=%d, phy_id=%04x%04x]\n",
 | 
						|
			(int)(id >> AR8216_CTRL_VERSION_S),
 | 
						|
			(int)(id & AR8216_CTRL_REVISION),
 | 
						|
			priv->phy->bus->read(priv->phy->bus, priv->phy->addr, 2),
 | 
						|
			priv->phy->bus->read(priv->phy->bus, priv->phy->addr, 3));
 | 
						|
 | 
						|
		return UNKNOWN;
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
ar8216_set_vlan(struct switch_dev *dev, const struct switch_attr *attr,
 | 
						|
                struct switch_val *val)
 | 
						|
{
 | 
						|
	struct ar8216_priv *priv = to_ar8216(dev);
 | 
						|
	priv->vlan = !!val->value.i;
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
ar8216_get_vlan(struct switch_dev *dev, const struct switch_attr *attr,
 | 
						|
                struct switch_val *val)
 | 
						|
{
 | 
						|
	struct ar8216_priv *priv = to_ar8216(dev);
 | 
						|
	val->value.i = priv->vlan;
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
 | 
						|
static int
 | 
						|
ar8216_set_pvid(struct switch_dev *dev, int port, int vlan)
 | 
						|
{
 | 
						|
	struct ar8216_priv *priv = to_ar8216(dev);
 | 
						|
 | 
						|
	/* make sure no invalid PVIDs get set */
 | 
						|
 | 
						|
	if (vlan >= dev->vlans)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	priv->pvid[port] = vlan;
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
ar8216_get_pvid(struct switch_dev *dev, int port, int *vlan)
 | 
						|
{
 | 
						|
	struct ar8216_priv *priv = to_ar8216(dev);
 | 
						|
	*vlan = priv->pvid[port];
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
ar8216_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
 | 
						|
                struct switch_val *val)
 | 
						|
{
 | 
						|
	struct ar8216_priv *priv = to_ar8216(dev);
 | 
						|
	priv->vlan_id[val->port_vlan] = val->value.i;
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
ar8216_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
 | 
						|
                struct switch_val *val)
 | 
						|
{
 | 
						|
	struct ar8216_priv *priv = to_ar8216(dev);
 | 
						|
	val->value.i = priv->vlan_id[val->port_vlan];
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
 | 
						|
static int
 | 
						|
ar8216_mangle_tx(struct sk_buff *skb, struct net_device *dev)
 | 
						|
{
 | 
						|
	struct ar8216_priv *priv = dev->phy_ptr;
 | 
						|
	unsigned char *buf;
 | 
						|
 | 
						|
    if (unlikely(!priv))
 | 
						|
        goto error;
 | 
						|
 | 
						|
	if (!priv->vlan)
 | 
						|
		goto send;
 | 
						|
 | 
						|
	if (unlikely(skb_headroom(skb) < 2)) {
 | 
						|
		if (pskb_expand_head(skb, 2, 0, GFP_ATOMIC) < 0)
 | 
						|
			goto error;
 | 
						|
	}
 | 
						|
 | 
						|
	buf = skb_push(skb, 2);
 | 
						|
	buf[0] = 0x10;
 | 
						|
	buf[1] = 0x80;
 | 
						|
 | 
						|
send:
 | 
						|
	return priv->ndo_old->ndo_start_xmit(skb, dev);
 | 
						|
 | 
						|
error:
 | 
						|
	dev_kfree_skb_any(skb);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
ar8216_mangle_rx(struct sk_buff *skb, int napi)
 | 
						|
{
 | 
						|
	struct ar8216_priv *priv;
 | 
						|
	struct net_device *dev;
 | 
						|
	unsigned char *buf;
 | 
						|
	int port, vlan;
 | 
						|
 | 
						|
	dev = skb->dev;
 | 
						|
	if (!dev)
 | 
						|
		goto error;
 | 
						|
 | 
						|
	priv = dev->phy_ptr;
 | 
						|
	if (!priv)
 | 
						|
		goto error;
 | 
						|
 | 
						|
	/* don't strip the header if vlan mode is disabled */
 | 
						|
	if (!priv->vlan)
 | 
						|
		goto recv;
 | 
						|
 | 
						|
	/* strip header, get vlan id */
 | 
						|
	buf = skb->data;
 | 
						|
	skb_pull(skb, 2);
 | 
						|
 | 
						|
	/* check for vlan header presence */
 | 
						|
	if ((buf[12 + 2] != 0x81) || (buf[13 + 2] != 0x00))
 | 
						|
		goto recv;
 | 
						|
 | 
						|
	port = buf[0] & 0xf;
 | 
						|
 | 
						|
	/* no need to fix up packets coming from a tagged source */
 | 
						|
	if (priv->vlan_tagged & (1 << port))
 | 
						|
		goto recv;
 | 
						|
 | 
						|
	/* lookup port vid from local table, the switch passes an invalid vlan id */
 | 
						|
	vlan = priv->vlan_id[priv->pvid[port]];
 | 
						|
 | 
						|
	buf[14 + 2] &= 0xf0;
 | 
						|
	buf[14 + 2] |= vlan >> 8;
 | 
						|
	buf[15 + 2] = vlan & 0xff;
 | 
						|
 | 
						|
recv:
 | 
						|
	skb->protocol = eth_type_trans(skb, skb->dev);
 | 
						|
 | 
						|
	if (napi)
 | 
						|
		return netif_receive_skb(skb);
 | 
						|
	else
 | 
						|
		return netif_rx(skb);
 | 
						|
 | 
						|
error:
 | 
						|
	/* no vlan? eat the packet! */
 | 
						|
	dev_kfree_skb_any(skb);
 | 
						|
	return NET_RX_DROP;
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
ar8216_netif_rx(struct sk_buff *skb)
 | 
						|
{
 | 
						|
	return ar8216_mangle_rx(skb, 0);
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
ar8216_netif_receive_skb(struct sk_buff *skb)
 | 
						|
{
 | 
						|
	return ar8216_mangle_rx(skb, 1);
 | 
						|
}
 | 
						|
 | 
						|
 | 
						|
static struct switch_attr ar8216_globals[] = {
 | 
						|
	{
 | 
						|
		.type = SWITCH_TYPE_INT,
 | 
						|
		.name = "enable_vlan",
 | 
						|
		.description = "Enable VLAN mode",
 | 
						|
		.set = ar8216_set_vlan,
 | 
						|
		.get = ar8216_get_vlan,
 | 
						|
		.max = 1
 | 
						|
	},
 | 
						|
};
 | 
						|
 | 
						|
static struct switch_attr ar8216_port[] = {
 | 
						|
};
 | 
						|
 | 
						|
static struct switch_attr ar8216_vlan[] = {
 | 
						|
	{
 | 
						|
		.type = SWITCH_TYPE_INT,
 | 
						|
		.name = "pvid",
 | 
						|
		.description = "VLAN ID",
 | 
						|
		.set = ar8216_set_vid,
 | 
						|
		.get = ar8216_get_vid,
 | 
						|
		.max = 4094,
 | 
						|
	},
 | 
						|
};
 | 
						|
 | 
						|
 | 
						|
static int
 | 
						|
ar8216_get_ports(struct switch_dev *dev, struct switch_val *val)
 | 
						|
{
 | 
						|
	struct ar8216_priv *priv = to_ar8216(dev);
 | 
						|
	u8 ports = priv->vlan_table[val->port_vlan];
 | 
						|
	int i;
 | 
						|
 | 
						|
	val->len = 0;
 | 
						|
	for (i = 0; i < AR8216_NUM_PORTS; i++) {
 | 
						|
		struct switch_port *p;
 | 
						|
 | 
						|
		if (!(ports & (1 << i)))
 | 
						|
			continue;
 | 
						|
 | 
						|
		p = &val->value.ports[val->len++];
 | 
						|
		p->id = i;
 | 
						|
		if (priv->vlan_tagged & (1 << i))
 | 
						|
			p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
 | 
						|
		else
 | 
						|
			p->flags = 0;
 | 
						|
	}
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
ar8216_set_ports(struct switch_dev *dev, struct switch_val *val)
 | 
						|
{
 | 
						|
	struct ar8216_priv *priv = to_ar8216(dev);
 | 
						|
	u8 *vt = &priv->vlan_table[val->port_vlan];
 | 
						|
	int i, j;
 | 
						|
 | 
						|
	*vt = 0;
 | 
						|
	for (i = 0; i < val->len; i++) {
 | 
						|
		struct switch_port *p = &val->value.ports[i];
 | 
						|
 | 
						|
		if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
 | 
						|
			priv->vlan_tagged |= (1 << p->id);
 | 
						|
		else {
 | 
						|
			priv->vlan_tagged &= ~(1 << p->id);
 | 
						|
			priv->pvid[p->id] = val->port_vlan;
 | 
						|
 | 
						|
			/* make sure that an untagged port does not
 | 
						|
			 * appear in other vlans */
 | 
						|
			for (j = 0; j < AR8X16_MAX_VLANS; j++) {
 | 
						|
				if (j == val->port_vlan)
 | 
						|
					continue;
 | 
						|
				priv->vlan_table[j] &= ~(1 << p->id);
 | 
						|
			}
 | 
						|
		}
 | 
						|
 | 
						|
		*vt |= 1 << p->id;
 | 
						|
	}
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
ar8216_wait_bit(struct ar8216_priv *priv, int reg, u32 mask, u32 val)
 | 
						|
{
 | 
						|
	int timeout = 20;
 | 
						|
 | 
						|
	while ((priv->read(priv, reg) & mask) != val) {
 | 
						|
		if (timeout-- <= 0) {
 | 
						|
			printk(KERN_ERR "ar8216: timeout waiting for operation to complete\n");
 | 
						|
			return 1;
 | 
						|
		}
 | 
						|
	}
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void
 | 
						|
ar8216_vtu_op(struct ar8216_priv *priv, u32 op, u32 val)
 | 
						|
{
 | 
						|
	if (ar8216_wait_bit(priv, AR8216_REG_VTU, AR8216_VTU_ACTIVE, 0))
 | 
						|
		return;
 | 
						|
	if ((op & AR8216_VTU_OP) == AR8216_VTU_OP_LOAD) {
 | 
						|
		val &= AR8216_VTUDATA_MEMBER;
 | 
						|
		val |= AR8216_VTUDATA_VALID;
 | 
						|
		priv->write(priv, AR8216_REG_VTU_DATA, val);
 | 
						|
	}
 | 
						|
	op |= AR8216_VTU_ACTIVE;
 | 
						|
	priv->write(priv, AR8216_REG_VTU, op);
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
ar8216_hw_apply(struct switch_dev *dev)
 | 
						|
{
 | 
						|
	struct ar8216_priv *priv = to_ar8216(dev);
 | 
						|
	u8 portmask[AR8216_NUM_PORTS];
 | 
						|
	int i, j;
 | 
						|
 | 
						|
	mutex_lock(&priv->reg_mutex);
 | 
						|
	/* flush all vlan translation unit entries */
 | 
						|
	ar8216_vtu_op(priv, AR8216_VTU_OP_FLUSH, 0);
 | 
						|
 | 
						|
	memset(portmask, 0, sizeof(portmask));
 | 
						|
	if (priv->vlan) {
 | 
						|
		/* calculate the port destination masks and load vlans
 | 
						|
		 * into the vlan translation unit */
 | 
						|
		for (j = 0; j < AR8X16_MAX_VLANS; j++) {
 | 
						|
			u8 vp = priv->vlan_table[j];
 | 
						|
 | 
						|
			if (!vp)
 | 
						|
				continue;
 | 
						|
 | 
						|
			for (i = 0; i < AR8216_NUM_PORTS; i++) {
 | 
						|
				u8 mask = (1 << i);
 | 
						|
				if (vp & mask)
 | 
						|
					portmask[i] |= vp & ~mask;
 | 
						|
			}
 | 
						|
 | 
						|
			ar8216_vtu_op(priv,
 | 
						|
				AR8216_VTU_OP_LOAD |
 | 
						|
				(priv->vlan_id[j] << AR8216_VTU_VID_S),
 | 
						|
				priv->vlan_table[j]);
 | 
						|
		}
 | 
						|
	} else {
 | 
						|
		/* vlan disabled:
 | 
						|
		 * isolate all ports, but connect them to the cpu port */
 | 
						|
		for (i = 0; i < AR8216_NUM_PORTS; i++) {
 | 
						|
			if (i == AR8216_PORT_CPU)
 | 
						|
				continue;
 | 
						|
 | 
						|
			portmask[i] = 1 << AR8216_PORT_CPU;
 | 
						|
			portmask[AR8216_PORT_CPU] |= (1 << i);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	/* update the port destination mask registers and tag settings */
 | 
						|
	for (i = 0; i < AR8216_NUM_PORTS; i++) {
 | 
						|
		int egress, ingress;
 | 
						|
		int pvid;
 | 
						|
 | 
						|
		if (priv->vlan) {
 | 
						|
			pvid = priv->vlan_id[priv->pvid[i]];
 | 
						|
		} else {
 | 
						|
			pvid = i;
 | 
						|
		}
 | 
						|
 | 
						|
		if (priv->vlan && (priv->vlan_tagged & (1 << i))) {
 | 
						|
			egress = AR8216_OUT_ADD_VLAN;
 | 
						|
		} else {
 | 
						|
			egress = AR8216_OUT_STRIP_VLAN;
 | 
						|
		}
 | 
						|
		if (priv->vlan) {
 | 
						|
			ingress = AR8216_IN_SECURE;
 | 
						|
		} else {
 | 
						|
			ingress = AR8216_IN_PORT_ONLY;
 | 
						|
		}
 | 
						|
 | 
						|
		ar8216_rmw(priv, AR8216_REG_PORT_CTRL(i),
 | 
						|
			AR8216_PORT_CTRL_LEARN | AR8216_PORT_CTRL_VLAN_MODE |
 | 
						|
			AR8216_PORT_CTRL_SINGLE_VLAN | AR8216_PORT_CTRL_STATE |
 | 
						|
			AR8216_PORT_CTRL_HEADER | AR8216_PORT_CTRL_LEARN_LOCK,
 | 
						|
			AR8216_PORT_CTRL_LEARN |
 | 
						|
			  (priv->vlan && i == AR8216_PORT_CPU && (priv->chip == AR8216) ?
 | 
						|
			   AR8216_PORT_CTRL_HEADER : 0) |
 | 
						|
			  (egress << AR8216_PORT_CTRL_VLAN_MODE_S) |
 | 
						|
			  (AR8216_PORT_STATE_FORWARD << AR8216_PORT_CTRL_STATE_S));
 | 
						|
 | 
						|
		ar8216_rmw(priv, AR8216_REG_PORT_VLAN(i),
 | 
						|
			AR8216_PORT_VLAN_DEST_PORTS | AR8216_PORT_VLAN_MODE |
 | 
						|
			  AR8216_PORT_VLAN_DEFAULT_ID,
 | 
						|
			(portmask[i] << AR8216_PORT_VLAN_DEST_PORTS_S) |
 | 
						|
			  (ingress << AR8216_PORT_VLAN_MODE_S) |
 | 
						|
			  (pvid << AR8216_PORT_VLAN_DEFAULT_ID_S));
 | 
						|
	}
 | 
						|
	mutex_unlock(&priv->reg_mutex);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
ar8316_hw_init(struct ar8216_priv *priv) {
 | 
						|
	static int initialized;
 | 
						|
	int i;
 | 
						|
	u32 val;
 | 
						|
	struct mii_bus *bus;
 | 
						|
 | 
						|
	if (initialized)
 | 
						|
		return 0;
 | 
						|
 | 
						|
	val = priv->read(priv, 0x8);
 | 
						|
 | 
						|
	if (priv->phy->interface == PHY_INTERFACE_MODE_RGMII) {
 | 
						|
		/* value taken from Ubiquiti RouterStation Pro */
 | 
						|
		if (val == 0x81461bea) {
 | 
						|
			/* switch already intialized by bootloader */
 | 
						|
			initialized = true;
 | 
						|
			return 0;
 | 
						|
		}
 | 
						|
		priv->write(priv, 0x8, 0x81461bea);
 | 
						|
	} else if (priv->phy->interface == PHY_INTERFACE_MODE_GMII) {
 | 
						|
		/* value taken from AVM Fritz!Box 7390 sources */
 | 
						|
		if (val == 0x010e5b71) {
 | 
						|
			/* switch already initialized by bootloader */
 | 
						|
			initialized = true;
 | 
						|
			return 0;
 | 
						|
		}
 | 
						|
		priv->write(priv, 0x8, 0x010e5b71);
 | 
						|
	} else {
 | 
						|
		/* no known value for phy interface */
 | 
						|
		printk(KERN_ERR "ar8316: unsupported mii mode: %d.\n",
 | 
						|
			priv->phy->interface);
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	/* standard atheros magic */
 | 
						|
	priv->write(priv, 0x38, 0xc000050e);
 | 
						|
 | 
						|
	/* Initialize the ports */
 | 
						|
	bus = priv->phy->bus;
 | 
						|
	for (i = 0; i < 5; i++) {
 | 
						|
		if ((i == 4) &&
 | 
						|
			priv->phy->interface == PHY_INTERFACE_MODE_RGMII) {
 | 
						|
			/* work around for phy4 rgmii mode */
 | 
						|
			bus->write(bus, i, MII_ATH_DBG_ADDR, 0x12);
 | 
						|
			bus->write(bus, i, MII_ATH_DBG_DATA, 0x480c);
 | 
						|
			/* rx delay */
 | 
						|
			bus->write(bus, i, MII_ATH_DBG_ADDR, 0x0);
 | 
						|
			bus->write(bus, i, MII_ATH_DBG_DATA, 0x824e);
 | 
						|
			/* tx delay */
 | 
						|
			bus->write(bus, i, MII_ATH_DBG_ADDR, 0x5);
 | 
						|
			bus->write(bus, i, MII_ATH_DBG_DATA, 0x3d47);
 | 
						|
			msleep(1000);
 | 
						|
		}
 | 
						|
 | 
						|
		/* initialize the port itself */
 | 
						|
		bus->write(bus, i, MII_ADVERTISE,
 | 
						|
			ADVERTISE_ALL | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
 | 
						|
		bus->write(bus, i, MII_CTRL1000, ADVERTISE_1000FULL);
 | 
						|
		bus->write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
 | 
						|
		msleep(1000);
 | 
						|
	}
 | 
						|
	initialized = true;
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
ar8216_reset_switch(struct switch_dev *dev)
 | 
						|
{
 | 
						|
	struct ar8216_priv *priv = to_ar8216(dev);
 | 
						|
	int i;
 | 
						|
 | 
						|
	mutex_lock(&priv->reg_mutex);
 | 
						|
	memset(&priv->vlan, 0, sizeof(struct ar8216_priv) -
 | 
						|
		offsetof(struct ar8216_priv, vlan));
 | 
						|
	for (i = 0; i < AR8X16_MAX_VLANS; i++) {
 | 
						|
		priv->vlan_id[i] = i;
 | 
						|
	}
 | 
						|
	for (i = 0; i < AR8216_NUM_PORTS; i++) {
 | 
						|
		/* Enable port learning and tx */
 | 
						|
		priv->write(priv, AR8216_REG_PORT_CTRL(i),
 | 
						|
			AR8216_PORT_CTRL_LEARN |
 | 
						|
			(4 << AR8216_PORT_CTRL_STATE_S));
 | 
						|
 | 
						|
		priv->write(priv, AR8216_REG_PORT_VLAN(i), 0);
 | 
						|
 | 
						|
		/* Configure all PHYs */
 | 
						|
		if (i == AR8216_PORT_CPU) {
 | 
						|
			priv->write(priv, AR8216_REG_PORT_STATUS(i),
 | 
						|
				AR8216_PORT_STATUS_LINK_UP |
 | 
						|
				((priv->chip == AR8316) ?
 | 
						|
					AR8216_PORT_SPEED_1000M : AR8216_PORT_SPEED_100M) |
 | 
						|
				AR8216_PORT_STATUS_TXMAC |
 | 
						|
				AR8216_PORT_STATUS_RXMAC |
 | 
						|
				((priv->chip == AR8316) ? AR8216_PORT_STATUS_RXFLOW : 0) |
 | 
						|
				((priv->chip == AR8316) ? AR8216_PORT_STATUS_TXFLOW : 0) |
 | 
						|
				AR8216_PORT_STATUS_DUPLEX);
 | 
						|
		} else {
 | 
						|
			priv->write(priv, AR8216_REG_PORT_STATUS(i),
 | 
						|
				AR8216_PORT_STATUS_LINK_AUTO);
 | 
						|
		}
 | 
						|
	}
 | 
						|
	/* XXX: undocumented magic from atheros, required! */
 | 
						|
	priv->write(priv, 0x38, 0xc000050e);
 | 
						|
 | 
						|
	if (priv->chip == AR8216) {
 | 
						|
		ar8216_rmw(priv, AR8216_REG_GLOBAL_CTRL,
 | 
						|
			AR8216_GCTRL_MTU, 1518 + 8 + 2);
 | 
						|
	} else if (priv->chip == AR8316) {
 | 
						|
		/* enable jumbo frames */
 | 
						|
		ar8216_rmw(priv, AR8216_REG_GLOBAL_CTRL,
 | 
						|
			AR8316_GCTRL_MTU, 9018 + 8 + 2);
 | 
						|
	}
 | 
						|
 | 
						|
	if (priv->chip == AR8316) {
 | 
						|
		/* enable cpu port to receive multicast and broadcast frames */
 | 
						|
		priv->write(priv, AR8216_REG_FLOOD_MASK, 0x003f003f);
 | 
						|
	}
 | 
						|
	mutex_unlock(&priv->reg_mutex);
 | 
						|
	return ar8216_hw_apply(dev);
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
ar8216_config_init(struct phy_device *pdev)
 | 
						|
{
 | 
						|
	struct ar8216_priv *priv;
 | 
						|
	struct net_device *dev = pdev->attached_dev;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	priv = kzalloc(sizeof(struct ar8216_priv), GFP_KERNEL);
 | 
						|
	if (priv == NULL)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	priv->phy = pdev;
 | 
						|
 | 
						|
	priv->chip = ar8216_id_chip(priv);
 | 
						|
 | 
						|
	if (pdev->addr == 0)
 | 
						|
		printk(KERN_INFO "%s: AR%d switch driver attached.\n",
 | 
						|
			pdev->attached_dev->name, priv->chip);
 | 
						|
 | 
						|
 | 
						|
	if (pdev->addr != 0) {
 | 
						|
		if (priv->chip == AR8316) {
 | 
						|
			pdev->supported |= SUPPORTED_1000baseT_Full;
 | 
						|
			pdev->advertising |= ADVERTISED_1000baseT_Full;
 | 
						|
		}
 | 
						|
		kfree(priv);
 | 
						|
		return 0;
 | 
						|
	}
 | 
						|
 | 
						|
	pdev->supported = priv->chip == AR8316 ?
 | 
						|
		SUPPORTED_1000baseT_Full : SUPPORTED_100baseT_Full;
 | 
						|
	pdev->advertising = pdev->supported;
 | 
						|
 | 
						|
	mutex_init(&priv->reg_mutex);
 | 
						|
	priv->read = ar8216_mii_read;
 | 
						|
	priv->write = ar8216_mii_write;
 | 
						|
	memcpy(&priv->dev, &athdev, sizeof(struct switch_dev));
 | 
						|
	pdev->priv = priv;
 | 
						|
 | 
						|
	if (priv->chip == AR8316) {
 | 
						|
		priv->dev.name = "Atheros AR8316";
 | 
						|
		priv->dev.vlans = AR8X16_MAX_VLANS;
 | 
						|
		/* port 5 connected to the other mac, therefore unusable */
 | 
						|
		priv->dev.ports = (AR8216_NUM_PORTS - 1);
 | 
						|
	}
 | 
						|
 | 
						|
	if ((ret = register_switch(&priv->dev, pdev->attached_dev)) < 0) {
 | 
						|
		kfree(priv);
 | 
						|
		goto done;
 | 
						|
	}
 | 
						|
 | 
						|
	if (priv->chip == AR8316) {
 | 
						|
		ret = ar8316_hw_init(priv);
 | 
						|
		if (ret) {
 | 
						|
			kfree(priv);
 | 
						|
			goto done;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	ret = ar8216_reset_switch(&priv->dev);
 | 
						|
	if (ret) {
 | 
						|
		kfree(priv);
 | 
						|
		goto done;
 | 
						|
	}
 | 
						|
 | 
						|
	dev->phy_ptr = priv;
 | 
						|
 | 
						|
	/* VID fixup only needed on ar8216 */
 | 
						|
	if (pdev->addr == 0 && priv->chip == AR8216) {
 | 
						|
		pdev->pkt_align = 2;
 | 
						|
		pdev->netif_receive_skb = ar8216_netif_receive_skb;
 | 
						|
		pdev->netif_rx = ar8216_netif_rx;
 | 
						|
		priv->ndo_old = dev->netdev_ops;
 | 
						|
		memcpy(&priv->ndo, priv->ndo_old, sizeof(struct net_device_ops));
 | 
						|
		priv->ndo.ndo_start_xmit = ar8216_mangle_tx;
 | 
						|
		dev->netdev_ops = &priv->ndo;
 | 
						|
	}
 | 
						|
 | 
						|
done:
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
ar8216_read_status(struct phy_device *phydev)
 | 
						|
{
 | 
						|
	struct ar8216_priv *priv = phydev->priv;
 | 
						|
	int ret;
 | 
						|
	if (phydev->addr != 0) {
 | 
						|
		return genphy_read_status(phydev);
 | 
						|
	}
 | 
						|
 | 
						|
	phydev->speed = priv->chip == AR8316 ? SPEED_1000 : SPEED_100;
 | 
						|
	phydev->duplex = DUPLEX_FULL;
 | 
						|
	phydev->link = 1;
 | 
						|
 | 
						|
	/* flush the address translation unit */
 | 
						|
	mutex_lock(&priv->reg_mutex);
 | 
						|
	ret = ar8216_wait_bit(priv, AR8216_REG_ATU, AR8216_ATU_ACTIVE, 0);
 | 
						|
 | 
						|
	if (!ret)
 | 
						|
		priv->write(priv, AR8216_REG_ATU, AR8216_ATU_OP_FLUSH);
 | 
						|
	else
 | 
						|
		ret = -ETIMEDOUT;
 | 
						|
	mutex_unlock(&priv->reg_mutex);
 | 
						|
 | 
						|
	phydev->state = PHY_RUNNING;
 | 
						|
	netif_carrier_on(phydev->attached_dev);
 | 
						|
	phydev->adjust_link(phydev->attached_dev);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
ar8216_config_aneg(struct phy_device *phydev)
 | 
						|
{
 | 
						|
	if (phydev->addr == 0)
 | 
						|
		return 0;
 | 
						|
 | 
						|
	return genphy_config_aneg(phydev);
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
ar8216_probe(struct phy_device *pdev)
 | 
						|
{
 | 
						|
	struct ar8216_priv priv;
 | 
						|
	u16 chip;
 | 
						|
 | 
						|
	priv.phy = pdev;
 | 
						|
	chip = ar8216_id_chip(&priv);
 | 
						|
	if (chip == UNKNOWN)
 | 
						|
		return -ENODEV;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void
 | 
						|
ar8216_remove(struct phy_device *pdev)
 | 
						|
{
 | 
						|
	struct ar8216_priv *priv = pdev->priv;
 | 
						|
	struct net_device *dev = pdev->attached_dev;
 | 
						|
 | 
						|
	if (!priv)
 | 
						|
		return;
 | 
						|
 | 
						|
	if (priv->ndo_old && dev)
 | 
						|
		dev->netdev_ops = priv->ndo_old;
 | 
						|
	if (pdev->addr == 0)
 | 
						|
		unregister_switch(&priv->dev);
 | 
						|
	kfree(priv);
 | 
						|
}
 | 
						|
 | 
						|
/* template */
 | 
						|
static struct switch_dev athdev = {
 | 
						|
	.name = "Atheros AR8216",
 | 
						|
	.cpu_port = AR8216_PORT_CPU,
 | 
						|
	.ports = AR8216_NUM_PORTS,
 | 
						|
	.vlans = AR8216_NUM_VLANS,
 | 
						|
	.attr_global = {
 | 
						|
		.attr = ar8216_globals,
 | 
						|
		.n_attr = ARRAY_SIZE(ar8216_globals),
 | 
						|
	},
 | 
						|
	.attr_port = {
 | 
						|
		.attr = ar8216_port,
 | 
						|
		.n_attr = ARRAY_SIZE(ar8216_port),
 | 
						|
	},
 | 
						|
	.attr_vlan = {
 | 
						|
		.attr = ar8216_vlan,
 | 
						|
		.n_attr = ARRAY_SIZE(ar8216_vlan),
 | 
						|
	},
 | 
						|
	.get_port_pvid = ar8216_get_pvid,
 | 
						|
	.set_port_pvid = ar8216_set_pvid,
 | 
						|
	.get_vlan_ports = ar8216_get_ports,
 | 
						|
	.set_vlan_ports = ar8216_set_ports,
 | 
						|
	.apply_config = ar8216_hw_apply,
 | 
						|
	.reset_switch = ar8216_reset_switch,
 | 
						|
};
 | 
						|
 | 
						|
static struct phy_driver ar8216_driver = {
 | 
						|
	.phy_id		= 0x004d0000,
 | 
						|
	.name		= "Atheros AR8216/AR8316",
 | 
						|
	.phy_id_mask	= 0xffff0000,
 | 
						|
	.features	= PHY_BASIC_FEATURES,
 | 
						|
	.probe		= ar8216_probe,
 | 
						|
	.remove		= ar8216_remove,
 | 
						|
	.config_init	= &ar8216_config_init,
 | 
						|
	.config_aneg	= &ar8216_config_aneg,
 | 
						|
	.read_status	= &ar8216_read_status,
 | 
						|
	.driver		= { .owner = THIS_MODULE },
 | 
						|
};
 | 
						|
 | 
						|
int __init
 | 
						|
ar8216_init(void)
 | 
						|
{
 | 
						|
	return phy_driver_register(&ar8216_driver);
 | 
						|
}
 | 
						|
 | 
						|
void __exit
 | 
						|
ar8216_exit(void)
 | 
						|
{
 | 
						|
	phy_driver_unregister(&ar8216_driver);
 | 
						|
}
 | 
						|
 | 
						|
module_init(ar8216_init);
 | 
						|
module_exit(ar8216_exit);
 | 
						|
MODULE_LICENSE("GPL");
 | 
						|
 |