mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2025-11-04 06:54:27 -05:00
c98819a9e6
The "/dts-v1/;" identifier is supposed to be present once at the top of a device tree file after the includes have been processed. Like done for other targets recently, put the dts-v1 statement into the top-level SoC-based DTSI files, and remove all other occurences. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
118 lines
2.0 KiB
Plaintext
118 lines
2.0 KiB
Plaintext
#include "bcm6328.dtsi"
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/ {
|
|
model = "NuCom R5010UN v2";
|
|
compatible = "nucom,r5010un-v2", "brcm,bcm6328";
|
|
|
|
aliases {
|
|
led-boot = &led_power_green;
|
|
led-failsafe = &led_power_green;
|
|
led-running = &led_power_green;
|
|
led-upgrade = &led_power_green;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys-polled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
poll-interval = <20>;
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&pinctrl 23 1>;
|
|
linux,code = <KEY_RESTART>;
|
|
debounce-interval = <60>;
|
|
};
|
|
|
|
wps {
|
|
label = "wps";
|
|
gpios = <&pinctrl 24 1>;
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
debounce-interval = <60>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
inet_green {
|
|
label = "green:inet";
|
|
gpios = <&pinctrl 1 1>;
|
|
};
|
|
inet_fail_red {
|
|
label = "red:inet-fail";
|
|
gpios = <&pinctrl 2 1>;
|
|
};
|
|
dsl_red {
|
|
label = "green:dsl";
|
|
gpios = <&pinctrl 3 1>;
|
|
};
|
|
led_power_green: power_green {
|
|
label = "green:power";
|
|
gpios = <&pinctrl 4 1>;
|
|
default-state = "on";
|
|
};
|
|
power_fail_red {
|
|
label = "red:power-fail";
|
|
gpios = <&pinctrl 5 1>;
|
|
};
|
|
wps_green {
|
|
label = "green:wps";
|
|
gpios = <&pinctrl 10 1>;
|
|
};
|
|
usb_green {
|
|
label = "green:usb";
|
|
gpios = <&pinctrl 11 1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&hsspi {
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
spi-max-frequency = <16666667>;
|
|
spi-tx-bus-width = <2>;
|
|
spi-rx-bus-width = <2>;
|
|
reg = <0>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
reg = <0x000000 0x010000>;
|
|
label = "cfe";
|
|
read-only;
|
|
};
|
|
|
|
partition@10000 {
|
|
reg = <0x010000 0xfe0000>;
|
|
label = "linux";
|
|
compatible = "brcm,bcm963xx-imagetag";
|
|
};
|
|
|
|
partition@ff0000 {
|
|
reg = <0xff0000 0x010000>;
|
|
label = "nvram";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|