Mathias Kresin e4d9217fe5 ramips: improve BDCOM WAP2100-SK support ... Use the generic board detection instead of the target specific one as all recent additions are doing. Setup the USB led via devicetree (a58535771f) and include the required driver by default. Merge the led userspace setting with an existing identical case. Use the wps led for boot status indication. Move the partitions into a partition table node (6031ab345d) and drop needless labels. Drop misplaced cells properties (53624c1702). Cleanup the pinmux and only switch pins to gpio functions which a referenced as gpio in the dts. Match the maximum image size with the size of the firmware partition. Signed-off-by: Mathias Kresin <dev@kresin.me>		2018-11-26 15:54:22 +01:00
..
base-files	ramips: improve BDCOM WAP2100-SK support	2018-11-26 15:54:22 +01:00
dts	ramips: improve BDCOM WAP2100-SK support	2018-11-26 15:54:22 +01:00
files-4.14/drivers	ramips: mt7620: add force use of mdio-mode	2018-11-26 12:16:52 +01:00
image	ramips: improve BDCOM WAP2100-SK support	2018-11-26 15:54:22 +01:00
mt76x8	treewide: use wpad-basic for not small flash targets	2018-10-16 15:07:41 +01:00
mt7620	ramips: add support for Lava LR-25G001	2018-11-26 12:16:52 +01:00
mt7621	ramips: refresh mt7621 kernel config	2018-10-15 12:54:12 +02:00
patches-4.14	ralink: fix mt7620 nd_sd pinmux	2018-11-26 15:54:22 +01:00
rt288x	kernel: only optimized for size if small_flash	2018-07-12 18:15:32 +02:00
rt305x	kernel: only optimized for size if small_flash	2018-07-12 18:15:32 +02:00
rt3883	kernel: only optimized for size if small_flash	2018-07-12 18:15:32 +02:00
Makefile	ramips: switch to linux 4.14	2018-04-06 18:07:43 +02:00
modules.mk	ramips: rename pwm kernel module	2018-04-08 12:35:33 +02:00