mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2025-10-30 13:34:27 -04:00
d6f187f938
YunCore T830 is a simple N300 router with 5-port FE switch, detachable antennas and USB 2.0 port. Specification: - 650/597/216 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 5x 10/100 Mbps Ethernet - 2T2R 2.4 GHz (QCA9531), with ext. PA (SKY65174-21) and LNA - two external, detachable antennas (RP-SMA) - 1x USB 2.0 - 8x LED (7 driven by GPIO) - 1x button (reset) - DC jack for main power input (12 V) - UART and JTAG headers on PCB Flash instruction: 1. First, gain root access to the device, following below steps: - Login into web gui (default password/IP: admin/192.168.188.253). - Go to "Advanced" -> "Management" -> "System" and download backup of configuration (bakfile.bin). - Open the file as tar.gz archive, edit/update "shadow" file and change hash of root password to something known. - Repack the archive, rename it back to "bakfile.bin" and use to restore configuration of the device. - After that, device will reboot and can be accessed over SSH. 2. Then, install OpenWrt: - Login over SSH and issue command: fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000" - Upload "sysupgrade" image and install it (only if previous command succeeded) with command: "sysupgrade -n -F openwrt-...". Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
128 lines
3.0 KiB
C
128 lines
3.0 KiB
C
/*
|
|
* YunCore T830 board support
|
|
*
|
|
* Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/gpio.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <asm/mach-ath79/ath79.h>
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-usb.h"
|
|
#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
|
|
#define T830_GPIO_LED_LAN1 16
|
|
#define T830_GPIO_LED_LAN2 15
|
|
#define T830_GPIO_LED_LAN3 14
|
|
#define T830_GPIO_LED_LAN4 11
|
|
#define T830_GPIO_LED_USB 13
|
|
#define T830_GPIO_LED_WAN 4
|
|
#define T830_GPIO_LED_WLAN 12
|
|
|
|
#define T830_GPIO_BTN_RESET 17
|
|
|
|
#define T830_KEYS_POLL_INTERVAL 20 /* msec */
|
|
#define T830_KEYS_DEBOUNCE_INTERVAL (3 * T830_KEYS_POLL_INTERVAL)
|
|
|
|
#define T830_WMAC_CALDATA_OFFSET 0x1000
|
|
|
|
static struct gpio_led t830_gpio_leds[] __initdata = {
|
|
{
|
|
.name = "t830:green:lan1",
|
|
.gpio = T830_GPIO_LED_LAN1,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "t830:green:lan2",
|
|
.gpio = T830_GPIO_LED_LAN2,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "t830:green:lan3",
|
|
.gpio = T830_GPIO_LED_LAN3,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "t830:green:lan4",
|
|
.gpio = T830_GPIO_LED_LAN4,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "t830:green:usb",
|
|
.gpio = T830_GPIO_LED_USB,
|
|
.active_low = 1,
|
|
.default_state = LEDS_GPIO_DEFSTATE_KEEP,
|
|
}, {
|
|
.name = "t830:green:wan",
|
|
.gpio = T830_GPIO_LED_WAN,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "t830:green:wlan",
|
|
.gpio = T830_GPIO_LED_WLAN,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_button t830_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "reset",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = T830_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = T830_GPIO_BTN_RESET,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static void __init t830_setup(void)
|
|
{
|
|
u8 *art = (u8 *) KSEG1ADDR(0x1fff1000);
|
|
u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
|
|
ath79_register_m25p80(NULL);
|
|
|
|
ath79_setup_ar933x_phy4_switch(false, false);
|
|
|
|
ath79_register_mdio(0, 0x0);
|
|
|
|
ath79_switch_data.phy4_mii_en = 1;
|
|
ath79_switch_data.phy_poll_mask |= BIT(4);
|
|
|
|
/* LAN */
|
|
ath79_eth1_data.duplex = DUPLEX_FULL;
|
|
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
|
ath79_init_mac(ath79_eth1_data.mac_addr, mac + 6, 0);
|
|
ath79_register_eth(1);
|
|
|
|
/* WAN */
|
|
ath79_eth0_data.duplex = DUPLEX_FULL;
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
|
ath79_eth0_data.phy_mask = BIT(4);
|
|
ath79_eth0_data.speed = SPEED_100;
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
|
|
ath79_register_eth(0);
|
|
|
|
ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
|
|
AR934X_GPIO_FUNC_CLK_OBS4_EN);
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(t830_gpio_leds),
|
|
t830_gpio_leds);
|
|
|
|
ath79_register_gpio_keys_polled(-1, T830_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(t830_gpio_keys),
|
|
t830_gpio_keys);
|
|
|
|
ath79_register_usb();
|
|
ath79_register_wmac(art, NULL);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_T830, "T830", "YunCore T830", t830_setup);
|