Florian Fainelli 2d3ed6dc2d fix T-Com Speedport W 500V default config ...

The device is called SPW500V, not SP500W.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 25431

2011-02-09 13:09:02 +00:00

..

base-files

fix T-Com Speedport W 500V default config

2011-02-09 13:09:02 +00:00

files/arch/mips/include/asm/mach-bcm63xx

Added OpenWRT-specific field to imagetag so that we can record the real root length, so that when the CRC fixup is applied and the root length is recorded as zero we can still calculate the rootfs mtd partition size.

2010-12-26 04:18:13 +00:00

image

Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network.

2010-12-10 18:59:58 +00:00

patches-2.6.35

fix build of brcm-wl

2011-02-08 13:46:12 +00:00

profiles

Profiles: GW6X00: Replace ext2 module with ext4 as ext2 and 3 are going away. Remove kmod-loop as the need for it has been superseded by block-extroot, and remove kmod-fs-vfat as it takes space and is rarely needed.

2010-12-08 00:40:31 +00:00

base-files.mk

bcm63xx: Add defconfigs.

2010-11-28 22:04:19 +00:00

config-2.6.35

restore kernel oldconfig

2010-10-17 14:09:24 +00:00

Makefile

Profiles: Make buttons and led modules included by default so that failsafe will work in the case of builds for releases.

2010-12-08 00:40:28 +00:00

modules.mk

massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950

2010-07-12 14:06:13 +00:00