mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2025-10-24 02:24:33 -04:00
f2b7d9dc1c
The following adds the Aerohive HiveAP-330 Access Point to LEDE under
the mpc85xx/p1020 subtarget.
Hardware:
- SoC: Freescale P1020NSE2DFB
- NAND: Intel JS28F512M29EWH 64MB
- Memory: 2x ProMOS V59C1G01168QBJ3 128MB (Total of 256MB)
- 2.4GHz WiFi: Atheros AR9390-AL1A
- 5.0GHz WiFi: Atheros AR9390-AL1A
- Eth1: Atheros AR8035-A PoE
- Eth2: Atheros AR8035-A
- TPM: Atmel AT97SC3204
- LED Driver: TI LP5521
Flashing:
1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter a
password of administrator or AhNf?d@ta06 if prompted.
2. Once in U-Boot, tftp boot the initramfs image:
dhcp;
tftpboot 0x1000000 192.168.1.101:lede-
mpc85xx-p1020-hiveap-330-initramfs.zImage;
tftpboot 0x6000000 192.168.1.101:lede-mpc85xx-p1020-hiveap-330.fdt;
bootm 0x1000000 - 0x6000000;
3. Once booted, scp over the sysupgrade file and sysupgrade the device
to flash LEDE to the NAND.
sysupgrade /tmp/lede-mpc85xx-p1020-hiveap-330-sysupgrade.img
Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
110 lines
2.1 KiB
Bash
Executable File
110 lines
2.1 KiB
Bash
Executable File
#
|
|
# Copyright (C) 2011 OpenWrt.org
|
|
#
|
|
|
|
PART_NAME=firmware
|
|
|
|
get_magic_long_at() {
|
|
(get_image "$1" | dd bs=4 count=1 skip="$2" | hexdump -v -n 4 -e '1/1 "%02x"') 2>/dev/null
|
|
}
|
|
|
|
tplink_get_hwid() {
|
|
local part
|
|
|
|
part=$(find_mtd_part u-boot)
|
|
[ -z "$part" ] && return 1
|
|
|
|
dd if=$part bs=4 count=1 skip=81728 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
|
|
}
|
|
|
|
tplink_get_image_hwid() {
|
|
get_image "$@" | dd bs=4 count=1 skip=16 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
|
|
}
|
|
|
|
tplink_get_image_boot_size() {
|
|
get_image "$@" | dd bs=4 count=1 skip=37 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
|
|
}
|
|
|
|
platform_check_image() {
|
|
local board=$(board_name)
|
|
local magic="$(get_magic_long "$1")"
|
|
|
|
[ "$#" -gt 1 ] && return 1
|
|
|
|
case $board in
|
|
hiveap-330)
|
|
local init_magic=$(get_magic_long_at "$1" "65536")
|
|
local root_magic=$(get_magic_long_at "$1" "131072")
|
|
local kernel_magic=$(get_magic_long_at "$1" "10551296")
|
|
|
|
[ "$magic" != "d00dfeed" ] && {
|
|
echo "Invalid dtb image type."
|
|
return 1
|
|
}
|
|
[ "$init_magic" != "27051956" ] && {
|
|
echo "Invalid initramfs image type."
|
|
return 1
|
|
}
|
|
[ "$root_magic" != "68737173" ] && {
|
|
echo "Invalid rootfs image type."
|
|
return 1
|
|
}
|
|
[ "$kernel_magic" != "27051956" ] && {
|
|
echo "Invalid kernel image type."
|
|
return 1
|
|
}
|
|
return 0
|
|
;;
|
|
tl-wdr4900-v1)
|
|
[ "$magic" != "01000000" ] && {
|
|
echo "Invalid image type."
|
|
return 1
|
|
}
|
|
|
|
local hwid
|
|
local imageid
|
|
|
|
hwid=$(tplink_get_hwid)
|
|
imageid=$(tplink_get_image_hwid "$1")
|
|
|
|
[ "$hwid" != "$imageid" ] && {
|
|
echo "Invalid image, hardware ID mismatch, hw:$hwid image:$imageid."
|
|
return 1
|
|
}
|
|
|
|
local boot_size
|
|
|
|
boot_size=$(tplink_get_image_boot_size "$1")
|
|
[ "$boot_size" != "00000000" ] && {
|
|
echo "Invalid image, it contains a bootloader."
|
|
return 1
|
|
}
|
|
|
|
return 0
|
|
;;
|
|
esac
|
|
|
|
echo "Sysupgrade is not yet supported on $board."
|
|
return 1
|
|
}
|
|
|
|
platform_do_upgrade() {
|
|
local board=$(board_name)
|
|
|
|
case "$board" in
|
|
*)
|
|
default_do_upgrade "$ARGV"
|
|
;;
|
|
esac
|
|
}
|
|
|
|
disable_watchdog() {
|
|
killall watchdog
|
|
( ps | grep -v 'grep' | grep '/dev/watchdog' ) && {
|
|
echo 'Could not disable watchdog'
|
|
return 1
|
|
}
|
|
}
|
|
|
|
append sysupgrade_pre_upgrade disable_watchdog
|