John Crispin e60cb01c45 lantiq: ARV752DPW: fix reboot loop caused by wrong GPIO setting ... The GPIO buttons of ARV752DPW are active low. Treating them as active high caused a reboot loop as a reset-button press is detected by gpio-button-hotplug/gpio-keys-polled on startup. This fixes: https://dev.openwrt.org/ticket/12642 Signed-off-by: Rafael Gieschke <rafael@gieschke.de> SVN-Revision: 36783		2013-05-30 16:01:06 +00:00
..
ase	add linux-v3.7	2012-12-15 01:59:45 +00:00
base-files	lantiq: Fix ar8216 switch configuration	2013-05-30 16:00:59 +00:00
dts	lantiq: ARV752DPW: fix reboot loop caused by wrong GPIO setting	2013-05-30 16:01:06 +00:00
falcon	fix falcon profile	2012-12-16 10:03:23 +00:00
files/firmware/lantiq	move GPHY FW blobs to non versioned folder	2013-03-14 18:42:21 +00:00
image	lantiq: move dts files to thir own folder	2013-04-25 19:03:32 +00:00
patches-3.7	fixes NO_XIP on CFI0001 flash	2013-03-12 13:53:08 +00:00
patches-3.8	lantiq: wifi calibration from MTD	2013-05-30 16:00:32 +00:00
svip_be	generic: move GENERIC_PWM symbol into the generic config	2012-09-13 06:38:31 +00:00
svip_le	target: refresh all target configs with kconfig.pl	2012-10-29 10:11:05 +00:00
xway	add VG3503J support	2013-04-11 19:18:07 +00:00
base-files.mk	lantiq: add runtime generation of /etc/config/network	2011-11-15 18:21:00 +00:00
config-3.7	kernel: move CONFIG_MIPS_SEAD3 to generic	2013-05-12 21:41:55 +00:00
config-default	kernel: move CONFIG_MIPS_SEAD3 to generic	2013-05-12 21:41:55 +00:00
Makefile	kernel: update linux 3.8 to 3.8.13	2013-05-26 16:02:31 +00:00
modules.mk	fix i2c-lantiq module	2012-12-16 10:03:18 +00:00