Jonas Gorski d24d5412ff b53: widen stp state mask to 3 bits (instead of 2) ... At least on my b53 chip, the mask is 3 bits wide, and because of this some STP states are not set properly and discarded when read. Maybe for some other chips it makes sense to have just 2 bits width, but I don't have other versions around to test/validate. If that's the case then maybe we could add another STP state mask. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45937		2015-06-10 09:21:31 +00:00
..
adm5120	adm5120: fix subtarget dependency for kmod-pata-rb153-cf	2015-05-28 09:06:28 +00:00
adm8668	adm8668: drop 3.14	2015-04-11 10:28:06 +00:00
ar7	ar7: fix imagebuilder	2015-05-28 13:45:33 +00:00
ar71xx	kernel: remove NAND flash related kmod-* packages	2015-06-07 07:22:11 +00:00
arm64	arm64: use common image prefix	2015-05-27 14:57:38 +00:00
at91	at91: fix imagebuilder	2015-05-28 13:25:21 +00:00
ath25	ath25: set myself as maintainer	2015-03-13 03:02:34 +00:00
au1000	au1000: add a missing dependency to the pcmcia module	2015-06-01 06:03:52 +00:00
bcm53xx	bcm53xx: backport the latest 4.2 ARM BCM5302X patches	2015-06-07 14:41:05 +00:00
brcm47xx	brcm47xx: refresh kernel config	2015-06-07 10:09:10 +00:00
brcm63xx	brcm63xx: fix livebox image generation	2015-06-02 10:23:45 +00:00
brcm2708	brcm2708: fix imagebuilder	2015-05-29 11:28:54 +00:00
cns3xxx	cns3xxx: use common image prefix	2015-05-27 15:18:29 +00:00
gemini	gemini: fix imagebuilder	2015-05-29 11:28:33 +00:00
generic	b53: widen stp state mask to 3 bits (instead of 2)	2015-06-10 09:21:31 +00:00
imx6	kernel: update 3.18 to 3.18.14	2015-05-21 19:32:46 +00:00
ipq806x	kernel: move a symbol from the ipq806x config to generic to prevent it from being nuked by make kernel_oldconfig	2015-06-07 07:32:35 +00:00
ixp4xx	ixp4xx: use usb-*-pci where appropriate	2015-05-29 14:39:12 +00:00
kirkwood	kirkwood: disable TSO on the ethernet device by default, fixes data corruption issues (#19735)	2015-05-27 14:56:13 +00:00
lantiq	lantiq: Backport gpio-stp-xway to fix the highest bits of the PHY LEDs	2015-06-05 14:11:51 +00:00
malta	malta: add default network configuration	2015-05-31 17:45:43 +00:00
mcs814x	kernel: update 3.18 to 3.18.14	2015-05-21 19:32:46 +00:00
mpc85xx	mpc85xx: TL-WDR4900: Fix port 6 being shown as up (10MBit/half) in LUCI/swconfig	2015-05-25 21:15:37 +00:00
mvebu	mvebu: make flashing more safe	2015-05-27 19:03:22 +00:00
mxs	mxs: fix imagebuilder	2015-05-29 08:42:50 +00:00
netlogic	netlogic: copy initramfs image to $(BIN_DIR)	2015-04-23 22:31:36 +00:00
octeon	octeon: fix imagebuilder	2015-05-29 11:28:20 +00:00
omap	omap: use common image prefix	2015-05-27 15:34:30 +00:00
omap24xx	omap24xx: Add basic config for linux-4.0	2015-03-19 18:45:32 +00:00
orion	kernel: disable INET_LRO by default	2015-04-28 13:31:08 +00:00
oxnas	kernel: update 3.18 to 3.18.14	2015-05-21 19:32:46 +00:00
ppc40x	ppc40x: upgrade to 3.18	2015-04-12 20:48:13 +00:00
ppc44x	ppc44x: use the mtdsplit framework for the Taishan	2015-03-11 12:20:03 +00:00
pxa	kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED	2015-03-06 07:56:34 +00:00
ramips	ramips: fix Power LED handling for WHR-300HP2, WHR-600D, WHR-1166D	2015-06-08 12:51:13 +00:00
rb532	kernel: update 3.18 to 3.18.14	2015-05-21 19:32:46 +00:00
realview	realview: use common image prefix	2015-05-27 15:34:38 +00:00
sunxi	sunxi: correct default package selection, fixes imagebuilder	2015-05-29 13:55:26 +00:00
uml	uml: remove linux 3.14 support	2015-03-28 13:20:52 +00:00
x86	x86/64: add e1000e to the default packages	2015-05-29 08:20:58 +00:00
xburst	xburst: fix imagebuilder	2015-05-28 12:25:45 +00:00
Makefile