mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2025-12-14 16:42:10 -05:00
401c0a03f1
The Zyxel NWA210AX is a wall- and ceiling-mountable access point (AP). Hardware specifications: - SoC: Qualcomm IPQ8071A - RAM: 1 GB (Samsung K4A8G165WC-BCTD) - Flash: 8 MB (Winbond W25Q64DW), 256 MB (Winbond W29N02GZ) - Ethernet: 1x 2.5 Gbps RJ45 port (QCA8081), 1x 1 Gbps RJ45 port (AR8033) - WiFi: 2.4 GHz 802.11ax/b/g/n (QCN5024), 5 GHz 802.11 ac/ax/n (QCN5054) - Power: DC 12V/PoE 802.3at - Button: Reset - LEDs: Multicolour red/green/blue/white via LP5562 Installation/flashing instructions: 1. In OEM web interface navigate to gear icon → System → SSH and enable SSH. 2. Log in via SSH (username/password are the same as for the web interface). 3. Run "debug dual-image show". 4. Verify that output is "Current Image num: 1". 5. If this is not the case (i.e. if the output is "Current Image num: 0"): a. Either flash a fresh version of factory firmware, or b. run "debug dual-image set boot-image image1" and then run "reboot". 6. Log in via SSH again and verify that output is "Current Image num: 1". 7. Rename "openwrt-qualcommax-ipq807x-zyxel_nwa210ax-squashfs-factory.bin" to "openwrt.bin" to avoid upload errors in the OEM web interface. 8. Reopen OEM web interface, navigate to wrench icon → File Manager → Firmware Package and upload the bin file. Once the upgrade process is finished and OpenWrt has booted, the LED will light up green. Switching between OpenWrt and OEM firmware: - OpenWrt → Zyxel via ssh command "zyxel-bootconfig-ipq807x set image1". - Zyxel → OpenWrt via ssh command "debug dual-image set boot-image image0". This commit is based on the work of Pascal Beleiu <pascal@beleiu.de>: 93ca21f3 (qualcommax: ipq807x: add support for Zyxel NWA210AX, 2025-03-17) Signed-off-by: Eric Schäfer <eric@es86.de> Link: https://github.com/openwrt/openwrt/pull/19828 Signed-off-by: Robert Marko <robimarko@gmail.com> |
||
|---|---|---|
| .. | ||
| apm821xx | ||
| ath79 | ||
| fw_defaults | ||
| fw_loadenv | ||
| fw_printsys | ||
| fw_setsys | ||
| imx_cortexa7 | ||
| imx_cortexa9 | ||
| imx_cortexa53 | ||
| ipq40xx | ||
| ipq806x | ||
| kirkwood | ||
| lantiq | ||
| layerscape | ||
| mediatek_filogic | ||
| mediatek_mt7622 | ||
| mediatek_mt7623 | ||
| mediatek_mt7629 | ||
| mpc85xx | ||
| mvebu | ||
| mxs | ||
| octeon | ||
| oxnas | ||
| pistachio | ||
| qoriq | ||
| qualcommax_ipq50xx | ||
| qualcommax_ipq60xx | ||
| qualcommax_ipq807x | ||
| qualcommbe_ipq95xx | ||
| ramips | ||
| realtek | ||
| rockchip_armv8 | ||
| uboot-envtools.sh | ||