Álvaro Fernández Rojas cfdcf4b4d9 bmips: add support for Comtrend WAP-5813n ... The Comtrend WAP-5813n is a wifi gigabit router, 2.4 GHz single band with two external antennas. Hardware: - SoC: Broadcom BCM6369 - CPU: dual core BMIPS4350 @ 400Mhz - RAM: 64 MB DDR - Flash: 8 MB parallel NOR - LAN switch: Broadcom BCM53115, 5x 1Gbit - Wifi 2.4 GHz: miniPCI Broadcom BCM4322 802.11bgn - USB: 1x 2.0 (optional) - Buttons: 3x (reset) - LEDs: yes - UART: yes Installation via CFE web UI: 1. Power off the router. 2. Press reset button near the power switch. 3. Keep it pressed while powering up during ~20+ seconds. 4. Browse to http://192.168.1.1 and upload the firmware. 5. Wait a few minutes for it to finish. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit c3b1ef2dfd)		2023-06-11 18:33:33 +02:00
..
base-files/lib/upgrade	bmips: add subtargets for each SoC	2023-04-10 10:04:08 +02:00
bcm6318	bmips: switch to generic bcma/ssb fallback SPROM	2023-04-23 12:18:35 +02:00
bcm6328	bmips: switch to generic bcma/ssb fallback SPROM	2023-04-23 12:18:35 +02:00
bcm6358	bmips: switch to generic bcma/ssb fallback SPROM	2023-04-23 12:18:35 +02:00
bcm6362	bmips: switch to generic bcma/ssb fallback SPROM	2023-04-23 12:18:35 +02:00
bcm6368	bmips: add support for Comtrend WAP-5813n	2023-06-11 18:33:33 +02:00
bcm63268	bmips: switch to generic bcma/ssb fallback SPROM	2023-04-23 12:18:35 +02:00
dts	bmips: add support for Comtrend WAP-5813n	2023-06-11 18:33:33 +02:00
files	bmips: document GPIO external interrupts	2023-04-27 15:39:09 +02:00
image	bmips: add support for Comtrend WAP-5813n	2023-06-11 18:33:33 +02:00
patches-5.15	bmips: improve kernel patches	2023-05-17 18:25:40 +02:00
profiles
Makefile	bmips: remove source-only flag	2023-04-10 10:04:08 +02:00
modules.mk	bmips: add LED kernel modules	2023-04-09 10:34:05 +02:00