mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2025-12-06 12:44:00 -05:00
Dual-slot NAS based on Marvell Kirkwood.
Specifications:
- Marvell 88F6702 @1GHz
- 256Mb RAM
- 128Mb NAND
- 1x GbE LAN (Marvell 88E1318R)
- 1x USB 2.0
- 2x SATA
- Weltrend WT69P3 ("supervisor" MCU chip)
- Serial on J2 (115200,8n1)
- Newer bootROM so kwboot-ing via serial is possible
Notes:
- The Weltrend MCU is controlled by the package added in utils/dns320l-mcu.
- The original MAC address is stored in the "mini firmware" image's first
17 bytes.
- Compared to the original MTD layout, the uImage+rootfs are now stored in
a common ubi partition.
Installation:
1. Serial console
- Connect your levelshifter to the serial console
on J2 (refer to the wiki page for pinout)
2. Update u-boot
- Download the u-boot.kwb image for the device
- Powercycle the NAS
- Run "kwboot -b u-boot-dns320l/u-boot.kwb /dev/ttyUSB0 -p"
- Connect to the serial console with minicom
- tftp 0x0800000 u-boot-dns320l/u-boot.kwb
(Please note that "PHY reset timed out" seems to be customary
on kirkwood devices, the egiga0 interface works regardless.)
- nand erase 0x0 100000
- nand write 0x0800000 0x0 0x100000
- reset
3. Install OpenWrt
- Boot up the initramfs image
- tftpboot 0x800000 openwrt-kirkwood-generic-dlink_dns320l-initramfs-uImage; bootm 0x800000
- Download the sysupgrade image and perform sysupgrade
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Reviewed-by: Pawel Dembicki <paweldembicki@gmail.com>
|
||
|---|---|---|
| .. | ||
| 100-ib62x0.patch | ||
| 101-iconnect.patch | ||
| 102-dockstar.patch | ||
| 103-iomega-ix2-200.patch | ||
| 105-linksys-viper-dts.patch | ||
| 106-goflexnet.patch | ||
| 107-01-zyxel-nsa3x0-common-nand-partitions.patch | ||
| 107-03-nsa325.patch | ||
| 109-pogoplug_v4.patch | ||
| 110-pogo_e02.patch | ||
| 111-l-50.patch | ||
| 112-sheevaplug.patch | ||
| 113-readynas_duo_v2.patch | ||
| 114-ctera-c-200-v1.patch | ||
| 115-nsa310s.patch | ||
| 116-4i-edge-200.patch | ||
| 117-netgear_stora.patch | ||
| 118-dns-320l.patch | ||
| 201-enable-sata-port-specific-led-triggers.patch | ||
| 202-linksys-find-active-root.patch | ||
| 203-blackarmor-nas220.patch | ||