Daniel Golle cc7fa7fcec ramips: fix reboot with W25Q256 with 4-address-mode enabled ... Some board vendors actually changed the loader to expect the chip to come up in 4-address-mode and flipped the ADP bit in the flash chip's configuration register which makes it come up in 4-address-mode. Hence it doesn't make sense to avoid switching to 4-address-mode on those boards but the opposite as otherwise reboot hangs eg. on the WrtNode2 boards. Fix this by checking the ADP register and only using SPI_NOR_4B_READ_OP on chips which have ADP==0 (come up in 3-byte mode). See also datasheet section 7.1.11 Power Up Address Mode (ADP) Fixes: 22d982ea0 ("ramips: add support for switching between 3-byte and 4-byte addressing on w25q256 flash") Signed-off-by: Daniel Golle <daniel@makrotopia.org> (backported from 8796680277)		2018-12-18 09:43:58 +01:00
..
base-files	ramips: fix leds on GL.iNet GL-MT300N-V2	2018-12-07 21:41:56 +01:00
dts	ramips: fix leds on GL.iNet GL-MT300N-V2	2018-12-07 21:41:56 +01:00
files-4.14/drivers	Revert "mt7620: gsw: make IntPHY and ExtPHY share mdio addr 4 possible"	2018-08-06 19:54:19 +02:00
image	ramips: fix Archer C20 sysupgrade	2018-09-26 20:36:32 +02:00
mt76x8	kernel: enable THIN_ARCHIVES by default	2018-05-24 17:24:31 +02:00
mt7620	kernel: enable THIN_ARCHIVES by default	2018-05-24 17:24:31 +02:00
mt7621	ramips: Add support for Mikrotik RouterBOARD RBM33g	2018-06-21 06:55:10 +02:00
patches-4.14	ramips: fix reboot with W25Q256 with 4-address-mode enabled	2018-12-18 09:43:58 +01:00
rt288x	kernel: enable THIN_ARCHIVES by default	2018-05-24 17:24:31 +02:00
rt305x	ramips: add dwr-512 jboot firmware configuration	2018-04-08 09:51:06 +02:00
rt3883	kernel: enable THIN_ARCHIVES by default	2018-05-24 17:24:31 +02:00
Makefile	ramips: switch to linux 4.14	2018-04-06 18:07:43 +02:00
modules.mk	ramips: rename pwm kernel module	2018-04-08 12:35:33 +02:00