hurricos/openwrt-mirror
1
0
Fork 0
mirror of git://git.openwrt.org/openwrt/openwrt.git synced 2025-11-04 06:54:27 -05:00
Code Issues Projects Releases Wiki Activity
c7fa38484c
openwrt-mirror/target/linux/s3c24xx/patches-2.6.30/060-spi-gpio-non-blocking.patch
Imre Kaloz 04bca7b528 update to 2.6.30-rc7 
SVN-Revision: 16048
2009-05-25 12:27:13 +00:00

419 lines
12 KiB
Diff
Raw Blame History

--- a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
@@ -21,7 +21,8 @@ struct s3c2410_spigpio_info {
int num_chipselect;
int bus_num;
- void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);
+ int non_blocking_transfer;
+ void (*chip_select)(struct s3c2410_spigpio_info *spi, int csid, int cs);
};
--- a/drivers/spi/spi_bitbang.c
+++ b/drivers/spi/spi_bitbang.c
@@ -264,6 +264,123 @@ static int spi_bitbang_bufs(struct spi_d
* Drivers can provide word-at-a-time i/o primitives, or provide
* transfer-at-a-time ones to leverage dma or fifo hardware.
*/
+
+/* Synchronous non blocking transfer */
+int
+spi_bitbang_transfer_sync(struct spi_device *spi, struct spi_message *m)
+{
+ struct spi_bitbang *bitbang = spi_master_get_devdata(spi->master);
+ struct spi_transfer *t;
+ unsigned long flags;
+ int cs_change = 1;
+ int status;
+ int nsecs;
+ int (*setup_transfer)(struct spi_device *, struct spi_transfer *);
+
+ /* FIXME this is made-up ... the correct value is known to
+ * word-at-a-time bitbang code, and presumably chipselect()
+ * should enforce these requirements too?
+ */
+ nsecs = 100;
+ cs_change = 1;
+ status = 0;
+ setup_transfer = NULL;
+
+ local_irq_save(flags);
+ list_for_each_entry (t, &m->transfers, transfer_list) {
+ /* override or restore speed and wordsize */
+ if (t->speed_hz || t->bits_per_word) {
+ setup_transfer = bitbang->setup_transfer;
+ if (!setup_transfer) {
+ status = -ENOPROTOOPT;
+ break;
+ }
+ }
+ if (setup_transfer) {
+ status = setup_transfer(spi, t);
+ if (status < 0)
+ break;
+ }
+
+ /* set up default clock polarity, and activate chip;
+ * this implicitly updates clock and spi modes as
+ * previously recorded for this device via setup().
+ * (and also deselects any other chip that might be
+ * selected ...)
+ */
+
+ if (cs_change) {
+ bitbang->chipselect(spi, BITBANG_CS_ACTIVE);
+ ndelay(nsecs);
+ }
+
+ cs_change = t->cs_change;
+ if (!t->tx_buf && !t->rx_buf && t->len) {
+ status = -EINVAL;
+ break;
+ }
+
+ /* transfer data. the lower level code handles any
+ * new dma mappings it needs. our caller always gave
+ * us dma-safe buffers.
+ */
+ if (t->len) {
+ /* REVISIT dma API still needs a designated
+ * DMA_ADDR_INVALID; ~0 might be better.
+ */
+ if (!m->is_dma_mapped)
+ t->rx_dma = t->tx_dma = 0;
+ status = bitbang->txrx_bufs(spi, t);
+ }
+
+ if (status > 0)
+ m->actual_length += status;
+ if (status != t->len) {
+ /* always report some kind of error */
+ if (status >= 0)
+ status = -EREMOTEIO;
+ break;
+ }
+ status = 0;
+ /* protocol tweaks before next transfer */
+ if (t->delay_usecs)
+ udelay(t->delay_usecs);
+ if (!cs_change)
+ continue;
+ if (t->transfer_list.next == &m->transfers)
+ break;
+ /* sometimes a short mid-message deselect of the chip
+ * may be needed to terminate a mode or command
+ */
+ ndelay(nsecs);
+ bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
+ ndelay(nsecs);
+ }
+
+ m->status = status;
+ if (m->complete)
+ m->complete(m->context);
+
+ /* restore speed and wordsize */
+ if (setup_transfer)
+ setup_transfer(spi, NULL);
+
+ /* normally deactivate chipselect ... unless no error and
+ * cs_change has hinted that the next message will probably
+ * be for this chip too.
+ */
+ if (!(status == 0 && cs_change)) {
+ ndelay(nsecs);
+ bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
+ ndelay(nsecs);
+ }
+
+ local_irq_restore(flags);
+
+ return status;
+}
+EXPORT_SYMBOL_GPL(spi_bitbang_transfer_sync);
+
static void bitbang_work(struct work_struct *work)
{
struct spi_bitbang *bitbang =
@@ -274,120 +391,13 @@ static void bitbang_work(struct work_str
bitbang->busy = 1;
while (!list_empty(&bitbang->queue)) {
struct spi_message *m;
- struct spi_device *spi;
- unsigned nsecs;
- struct spi_transfer *t = NULL;
- unsigned tmp;
- unsigned cs_change;
- int status;
- int (*setup_transfer)(struct spi_device *,
- struct spi_transfer *);
m = container_of(bitbang->queue.next, struct spi_message,
queue);
list_del_init(&m->queue);
- spin_unlock_irqrestore(&bitbang->lock, flags);
-
- /* FIXME this is made-up ... the correct value is known to
- * word-at-a-time bitbang code, and presumably chipselect()
- * should enforce these requirements too?
- */
- nsecs = 100;
-
- spi = m->spi;
- tmp = 0;
- cs_change = 1;
- status = 0;
- setup_transfer = NULL;
-
- list_for_each_entry (t, &m->transfers, transfer_list) {
-
- /* override or restore speed and wordsize */
- if (t->speed_hz || t->bits_per_word) {
- setup_transfer = bitbang->setup_transfer;
- if (!setup_transfer) {
- status = -ENOPROTOOPT;
- break;
- }
- }
- if (setup_transfer) {
- status = setup_transfer(spi, t);
- if (status < 0)
- break;
- }
-
- /* set up default clock polarity, and activate chip;
- * this implicitly updates clock and spi modes as
- * previously recorded for this device via setup().
- * (and also deselects any other chip that might be
- * selected ...)
- */
- if (cs_change) {
- bitbang->chipselect(spi, BITBANG_CS_ACTIVE);
- ndelay(nsecs);
- }
- cs_change = t->cs_change;
- if (!t->tx_buf && !t->rx_buf && t->len) {
- status = -EINVAL;
- break;
- }
-
- /* transfer data. the lower level code handles any
- * new dma mappings it needs. our caller always gave
- * us dma-safe buffers.
- */
- if (t->len) {
- /* REVISIT dma API still needs a designated
- * DMA_ADDR_INVALID; ~0 might be better.
- */
- if (!m->is_dma_mapped)
- t->rx_dma = t->tx_dma = 0;
- status = bitbang->txrx_bufs(spi, t);
- }
- if (status > 0)
- m->actual_length += status;
- if (status != t->len) {
- /* always report some kind of error */
- if (status >= 0)
- status = -EREMOTEIO;
- break;
- }
- status = 0;
-
- /* protocol tweaks before next transfer */
- if (t->delay_usecs)
- udelay(t->delay_usecs);
-
- if (!cs_change)
- continue;
- if (t->transfer_list.next == &m->transfers)
- break;
-
- /* sometimes a short mid-message deselect of the chip
- * may be needed to terminate a mode or command
- */
- ndelay(nsecs);
- bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
- ndelay(nsecs);
- }
-
- m->status = status;
- m->complete(m->context);
-
- /* restore speed and wordsize */
- if (setup_transfer)
- setup_transfer(spi, NULL);
-
- /* normally deactivate chipselect ... unless no error and
- * cs_change has hinted that the next message will probably
- * be for this chip too.
- */
- if (!(status == 0 && cs_change)) {
- ndelay(nsecs);
- bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
- ndelay(nsecs);
- }
+ spin_unlock_irqrestore(&bitbang->lock, flags);
+ spi_bitbang_transfer_sync(m->spi, m);
spin_lock_irqsave(&bitbang->lock, flags);
}
bitbang->busy = 0;
@@ -459,6 +469,9 @@ int spi_bitbang_start(struct spi_bitbang
if (!bitbang->master->transfer)
bitbang->master->transfer = spi_bitbang_transfer;
+ if (!bitbang->master->transfer_sync && bitbang->non_blocking_transfer)
+ bitbang->master->transfer_sync = spi_bitbang_transfer_sync;
+
if (!bitbang->txrx_bufs) {
bitbang->use_dma = 0;
bitbang->txrx_bufs = spi_bitbang_bufs;
--- a/drivers/spi/spi_s3c24xx_gpio.c
+++ b/drivers/spi/spi_s3c24xx_gpio.c
@@ -91,7 +91,7 @@ static void s3c2410_spigpio_chipselect(s
struct s3c2410_spigpio *sg = spidev_to_sg(dev);
if (sg->info && sg->info->chip_select)
- (sg->info->chip_select)(sg->info, value);
+ (sg->info->chip_select)(sg->info, dev->chip_select, value);
}
static int s3c2410_spigpio_probe(struct platform_device *dev)
@@ -112,14 +112,17 @@ static int s3c2410_spigpio_probe(struct
platform_set_drvdata(dev, sp);
- /* copy in the plkatform data */
+ /* copy in the platform data */
info = sp->info = dev->dev.platform_data;
+ master->num_chipselect = info->num_chipselect;
+
/* setup spi bitbang adaptor */
sp->bitbang.master = spi_master_get(master);
sp->bitbang.master->bus_num = info->bus_num;
sp->bitbang.master->num_chipselect = info->num_chipselect;
sp->bitbang.chipselect = s3c2410_spigpio_chipselect;
+ sp->bitbang.non_blocking_transfer = info->non_blocking_transfer;
sp->bitbang.txrx_word[SPI_MODE_0] = s3c2410_spigpio_txrx_mode0;
sp->bitbang.txrx_word[SPI_MODE_1] = s3c2410_spigpio_txrx_mode1;
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -129,6 +129,8 @@ struct mmc_request {
struct mmc_host;
struct mmc_card;
+extern void mmc_flush_scheduled_work(void);
+
extern void mmc_wait_for_req(struct mmc_host *, struct mmc_request *);
extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int);
extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
--- a/include/linux/mmc/sdio_ids.h
+++ b/include/linux/mmc/sdio_ids.h
@@ -25,5 +25,9 @@
#define SDIO_VENDOR_ID_MARVELL 0x02df
#define SDIO_DEVICE_ID_MARVELL_LIBERTAS 0x9103
+#define SDIO_DEVICE_ID_MARVELL_88W8688 0x9104
+#define SDIO_VENDOR_ID_ATHEROS 0x0271
+#define SDIO_DEVICE_ID_ATHEROS_AR6001 0x0100
+#define SDIO_DEVICE_ID_ATHEROS_AR6002 0x0200
#endif
--- a/include/linux/spi/spi_bitbang.h
+++ b/include/linux/spi/spi_bitbang.h
@@ -31,6 +31,9 @@ struct spi_bitbang {
u8 use_dma;
u8 flags; /* extra spi->mode support */
+ /* Support for synchronous non blocking transfers */
+ int non_blocking_transfer;
+
struct spi_master *master;
/* setup_transfer() changes clock and/or wordsize to match settings
@@ -62,6 +65,8 @@ extern void spi_bitbang_cleanup(struct s
extern int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m);
extern int spi_bitbang_setup_transfer(struct spi_device *spi,
struct spi_transfer *t);
+extern int spi_bitbang_transfer_sync(struct spi_device *spi,
+ struct spi_message *m);
/* start or stop queue processing */
extern int spi_bitbang_start(struct spi_bitbang *spi);
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -204,7 +204,6 @@ static inline void spi_unregister_driver
* SPI slaves, and are numbered from zero to num_chipselects.
* each slave has a chipselect signal, but it's common that not
* every chipselect is connected to a slave.
- * @dma_alignment: SPI controller constraint on DMA buffers alignment.
* @setup: updates the device mode and clocking records used by a
* device's SPI controller; protocol code may call this. This
* must fail if an unrecognized or unsupported mode is requested.
@@ -240,17 +239,7 @@ struct spi_master {
*/
u16 num_chipselect;
- /* some SPI controllers pose alignment requirements on DMAable
- * buffers; let protocol drivers know about these requirements.
- */
- u16 dma_alignment;
-
- /* Setup mode and clock, etc (spi driver may call many times).
- *
- * IMPORTANT: this may be called when transfers to another
- * device are active. DO NOT UPDATE SHARED REGISTERS in ways
- * which could break those transfers.
- */
+ /* setup mode and clock, etc (spi driver may call many times) */
int (*setup)(struct spi_device *spi);
/* bidirectional bulk transfers
@@ -275,6 +264,13 @@ struct spi_master {
int (*transfer)(struct spi_device *spi,
struct spi_message *mesg);
+ /*
+ * Synchronous non blocking transfer function. Should guarantee
+ * data availability when it returns
+ */
+ int (*transfer_sync)(struct spi_device *spi,
+ struct spi_message *mesg);
+
/* called on release() to free memory provided by spi_master */
void (*cleanup)(struct spi_device *spi);
};
@@ -584,6 +580,29 @@ spi_async(struct spi_device *spi, struct
return spi->master->transfer(spi, message);
}
+/**
+ * spi_non_blocking_transfer - Synchronous, non blocking transfer
+ * @spi: device with which data will be exchanged
+ * @message: describes the data transfers with optional completion handlers
+ * Context: any (irqs may be blocked, etc)
+ *
+ * Data is guaranteed to be written or read when this function returns.
+ *
+ * Note : This may not be supported by all spi masters.
+ */
+
+static inline int
+spi_non_blocking_transfer(struct spi_device *spi, struct spi_message *message)
+{
+ if (unlikely(!spi->master->transfer_sync)) {
+ dev_err(&spi->master->dev,
+ "non-blocking transfers not supported\n");
+ return -EIO;
+ }
+
+ return spi->master->transfer_sync(spi, message);
+}
+
/*---------------------------------------------------------------------------*/
/* All these synchronous SPI transfer routines are utilities layered
Reference in New Issue View Git Blame Copy Permalink