mirror of
				git://git.openwrt.org/openwrt/openwrt.git
				synced 2025-10-30 05:24:26 -04:00 
			
		
		
		
	This contains the following new bigger changes: * new partition parser which still could lake some features or have bugs * new nand flash driver * using physmap-flash flash driver for parallel flash * some changes to the serial flash driver With these changes OpenWrt starts using more of the mainline flash drivers. SVN-Revision: 35632
		
			
				
	
	
		
			366 lines
		
	
	
		
			10 KiB
		
	
	
	
		
			Diff
		
	
	
	
	
	
			
		
		
	
	
			366 lines
		
	
	
		
			10 KiB
		
	
	
	
		
			Diff
		
	
	
	
	
	
| --- a/drivers/ssb/Kconfig
 | |
| +++ b/drivers/ssb/Kconfig
 | |
| @@ -136,6 +136,11 @@ config SSB_DRIVER_MIPS
 | |
|  
 | |
|  	  If unsure, say N
 | |
|  
 | |
| +config SSB_SFLASH
 | |
| +	bool "SSB serial flash support"
 | |
| +	depends on SSB_DRIVER_MIPS && BROKEN
 | |
| +	default y
 | |
| +
 | |
|  # Assumption: We are on embedded, if we compile the MIPS core.
 | |
|  config SSB_EMBEDDED
 | |
|  	bool
 | |
| --- a/drivers/ssb/Makefile
 | |
| +++ b/drivers/ssb/Makefile
 | |
| @@ -11,6 +11,7 @@ ssb-$(CONFIG_SSB_SDIOHOST)		+= sdio.o
 | |
|  # built-in drivers
 | |
|  ssb-y					+= driver_chipcommon.o
 | |
|  ssb-y					+= driver_chipcommon_pmu.o
 | |
| +ssb-$(CONFIG_SSB_SFLASH)		+= driver_chipcommon_sflash.o
 | |
|  ssb-$(CONFIG_SSB_DRIVER_MIPS)		+= driver_mipscore.o
 | |
|  ssb-$(CONFIG_SSB_DRIVER_EXTIF)		+= driver_extif.o
 | |
|  ssb-$(CONFIG_SSB_DRIVER_PCICORE)	+= driver_pcicore.o
 | |
| --- /dev/null
 | |
| +++ b/drivers/ssb/driver_chipcommon_sflash.c
 | |
| @@ -0,0 +1,140 @@
 | |
| +/*
 | |
| + * Sonics Silicon Backplane
 | |
| + * ChipCommon serial flash interface
 | |
| + *
 | |
| + * Licensed under the GNU/GPL. See COPYING for details.
 | |
| + */
 | |
| +
 | |
| +#include <linux/ssb/ssb.h>
 | |
| +
 | |
| +#include "ssb_private.h"
 | |
| +
 | |
| +struct ssb_sflash_tbl_e {
 | |
| +	char *name;
 | |
| +	u32 id;
 | |
| +	u32 blocksize;
 | |
| +	u16 numblocks;
 | |
| +};
 | |
| +
 | |
| +static struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
 | |
| +	{ "M25P20", 0x11, 0x10000, 4, },
 | |
| +	{ "M25P40", 0x12, 0x10000, 8, },
 | |
| +
 | |
| +	{ "M25P16", 0x14, 0x10000, 32, },
 | |
| +	{ "M25P32", 0x15, 0x10000, 64, },
 | |
| +	{ "M25P64", 0x16, 0x10000, 128, },
 | |
| +	{ "M25FL128", 0x17, 0x10000, 256, },
 | |
| +	{ 0 },
 | |
| +};
 | |
| +
 | |
| +static struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
 | |
| +	{ "SST25WF512", 1, 0x1000, 16, },
 | |
| +	{ "SST25VF512", 0x48, 0x1000, 16, },
 | |
| +	{ "SST25WF010", 2, 0x1000, 32, },
 | |
| +	{ "SST25VF010", 0x49, 0x1000, 32, },
 | |
| +	{ "SST25WF020", 3, 0x1000, 64, },
 | |
| +	{ "SST25VF020", 0x43, 0x1000, 64, },
 | |
| +	{ "SST25WF040", 4, 0x1000, 128, },
 | |
| +	{ "SST25VF040", 0x44, 0x1000, 128, },
 | |
| +	{ "SST25VF040B", 0x8d, 0x1000, 128, },
 | |
| +	{ "SST25WF080", 5, 0x1000, 256, },
 | |
| +	{ "SST25VF080B", 0x8e, 0x1000, 256, },
 | |
| +	{ "SST25VF016", 0x41, 0x1000, 512, },
 | |
| +	{ "SST25VF032", 0x4a, 0x1000, 1024, },
 | |
| +	{ "SST25VF064", 0x4b, 0x1000, 2048, },
 | |
| +	{ 0 },
 | |
| +};
 | |
| +
 | |
| +static struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
 | |
| +	{ "AT45DB011", 0xc, 256, 512, },
 | |
| +	{ "AT45DB021", 0x14, 256, 1024, },
 | |
| +	{ "AT45DB041", 0x1c, 256, 2048, },
 | |
| +	{ "AT45DB081", 0x24, 256, 4096, },
 | |
| +	{ "AT45DB161", 0x2c, 512, 4096, },
 | |
| +	{ "AT45DB321", 0x34, 512, 8192, },
 | |
| +	{ "AT45DB642", 0x3c, 1024, 8192, },
 | |
| +	{ 0 },
 | |
| +};
 | |
| +
 | |
| +static void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode)
 | |
| +{
 | |
| +	int i;
 | |
| +	chipco_write32(cc, SSB_CHIPCO_FLASHCTL,
 | |
| +		       SSB_CHIPCO_FLASHCTL_START | opcode);
 | |
| +	for (i = 0; i < 1000; i++) {
 | |
| +		if (!(chipco_read32(cc, SSB_CHIPCO_FLASHCTL) &
 | |
| +		      SSB_CHIPCO_FLASHCTL_BUSY))
 | |
| +			return;
 | |
| +		cpu_relax();
 | |
| +	}
 | |
| +	pr_err("SFLASH control command failed (timeout)!\n");
 | |
| +}
 | |
| +
 | |
| +/* Initialize serial flash access */
 | |
| +int ssb_sflash_init(struct ssb_chipcommon *cc)
 | |
| +{
 | |
| +	struct ssb_sflash_tbl_e *e;
 | |
| +	u32 id, id2;
 | |
| +
 | |
| +	switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
 | |
| +	case SSB_CHIPCO_FLASHT_STSER:
 | |
| +		ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_DP);
 | |
| +
 | |
| +		chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 0);
 | |
| +		ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
 | |
| +		id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
 | |
| +
 | |
| +		chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 1);
 | |
| +		ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
 | |
| +		id2 = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
 | |
| +
 | |
| +		switch (id) {
 | |
| +		case 0xbf:
 | |
| +			for (e = ssb_sflash_sst_tbl; e->name; e++) {
 | |
| +				if (e->id == id2)
 | |
| +					break;
 | |
| +			}
 | |
| +			break;
 | |
| +		case 0x13:
 | |
| +			return -ENOTSUPP;
 | |
| +		default:
 | |
| +			for (e = ssb_sflash_st_tbl; e->name; e++) {
 | |
| +				if (e->id == id)
 | |
| +					break;
 | |
| +			}
 | |
| +			break;
 | |
| +		}
 | |
| +		if (!e->name) {
 | |
| +			pr_err("Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n",
 | |
| +			       id, id2);
 | |
| +			return -ENOTSUPP;
 | |
| +		}
 | |
| +
 | |
| +		break;
 | |
| +	case SSB_CHIPCO_FLASHT_ATSER:
 | |
| +		ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS);
 | |
| +		id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA) & 0x3c;
 | |
| +
 | |
| +		for (e = ssb_sflash_at_tbl; e->name; e++) {
 | |
| +			if (e->id == id)
 | |
| +				break;
 | |
| +		}
 | |
| +		if (!e->name) {
 | |
| +			pr_err("Unsupported Atmel serial flash (id: 0x%X)\n",
 | |
| +			       id);
 | |
| +			return -ENOTSUPP;
 | |
| +		}
 | |
| +
 | |
| +		break;
 | |
| +	default:
 | |
| +		pr_err("Unsupported flash type\n");
 | |
| +		return -ENOTSUPP;
 | |
| +	}
 | |
| +
 | |
| +	pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n",
 | |
| +		e->name, e->blocksize, e->numblocks);
 | |
| +
 | |
| +	pr_err("Serial flash support is not implemented yet!\n");
 | |
| +
 | |
| +	return -ENOTSUPP;
 | |
| +}
 | |
| --- a/drivers/ssb/driver_gpio.c
 | |
| +++ b/drivers/ssb/driver_gpio.c
 | |
| @@ -74,6 +74,16 @@ static void ssb_gpio_chipco_free(struct
 | |
|  	ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 0);
 | |
|  }
 | |
|  
 | |
| +static int ssb_gpio_chipco_to_irq(struct gpio_chip *chip, unsigned gpio)
 | |
| +{
 | |
| +	struct ssb_bus *bus = ssb_gpio_get_bus(chip);
 | |
| +
 | |
| +	if (bus->bustype == SSB_BUSTYPE_SSB)
 | |
| +		return ssb_mips_irq(bus->chipco.dev) + 2;
 | |
| +	else
 | |
| +		return -EINVAL;
 | |
| +}
 | |
| +
 | |
|  static int ssb_gpio_chipco_init(struct ssb_bus *bus)
 | |
|  {
 | |
|  	struct gpio_chip *chip = &bus->gpio;
 | |
| @@ -86,6 +96,7 @@ static int ssb_gpio_chipco_init(struct s
 | |
|  	chip->set		= ssb_gpio_chipco_set_value;
 | |
|  	chip->direction_input	= ssb_gpio_chipco_direction_input;
 | |
|  	chip->direction_output	= ssb_gpio_chipco_direction_output;
 | |
| +	chip->to_irq		= ssb_gpio_chipco_to_irq;
 | |
|  	chip->ngpio		= 16;
 | |
|  	/* There is just one SoC in one device and its GPIO addresses should be
 | |
|  	 * deterministic to address them more easily. The other buses could get
 | |
| @@ -134,6 +145,16 @@ static int ssb_gpio_extif_direction_outp
 | |
|  	return 0;
 | |
|  }
 | |
|  
 | |
| +static int ssb_gpio_extif_to_irq(struct gpio_chip *chip, unsigned gpio)
 | |
| +{
 | |
| +	struct ssb_bus *bus = ssb_gpio_get_bus(chip);
 | |
| +
 | |
| +	if (bus->bustype == SSB_BUSTYPE_SSB)
 | |
| +		return ssb_mips_irq(bus->extif.dev) + 2;
 | |
| +	else
 | |
| +		return -EINVAL;
 | |
| +}
 | |
| +
 | |
|  static int ssb_gpio_extif_init(struct ssb_bus *bus)
 | |
|  {
 | |
|  	struct gpio_chip *chip = &bus->gpio;
 | |
| @@ -144,6 +165,7 @@ static int ssb_gpio_extif_init(struct ss
 | |
|  	chip->set		= ssb_gpio_extif_set_value;
 | |
|  	chip->direction_input	= ssb_gpio_extif_direction_input;
 | |
|  	chip->direction_output	= ssb_gpio_extif_direction_output;
 | |
| +	chip->to_irq		= ssb_gpio_extif_to_irq;
 | |
|  	chip->ngpio		= 5;
 | |
|  	/* There is just one SoC in one device and its GPIO addresses should be
 | |
|  	 * deterministic to address them more easily. The other buses could get
 | |
| --- a/drivers/ssb/driver_mipscore.c
 | |
| +++ b/drivers/ssb/driver_mipscore.c
 | |
| @@ -10,6 +10,7 @@
 | |
|  
 | |
|  #include <linux/ssb/ssb.h>
 | |
|  
 | |
| +#include <linux/mtd/physmap.h>
 | |
|  #include <linux/serial.h>
 | |
|  #include <linux/serial_core.h>
 | |
|  #include <linux/serial_reg.h>
 | |
| @@ -17,6 +18,25 @@
 | |
|  
 | |
|  #include "ssb_private.h"
 | |
|  
 | |
| +static const char *part_probes[] = { "bcm47xxpart", NULL };
 | |
| +
 | |
| +static struct physmap_flash_data ssb_pflash_data = {
 | |
| +	.part_probe_types	= part_probes,
 | |
| +};
 | |
| +
 | |
| +static struct resource ssb_pflash_resource = {
 | |
| +	.name	= "ssb_pflash",
 | |
| +	.flags  = IORESOURCE_MEM,
 | |
| +};
 | |
| +
 | |
| +struct platform_device ssb_pflash_dev = {
 | |
| +	.name		= "physmap-flash",
 | |
| +	.dev		= {
 | |
| +		.platform_data  = &ssb_pflash_data,
 | |
| +	},
 | |
| +	.resource	= &ssb_pflash_resource,
 | |
| +	.num_resources	= 1,
 | |
| +};
 | |
|  
 | |
|  static inline u32 mips_read32(struct ssb_mipscore *mcore,
 | |
|  			      u16 offset)
 | |
| @@ -189,34 +209,43 @@ static void ssb_mips_serial_init(struct
 | |
|  static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
 | |
|  {
 | |
|  	struct ssb_bus *bus = mcore->dev->bus;
 | |
| +	struct ssb_pflash *pflash = &mcore->pflash;
 | |
|  
 | |
|  	/* When there is no chipcommon on the bus there is 4MB flash */
 | |
|  	if (!ssb_chipco_available(&bus->chipco)) {
 | |
| -		mcore->pflash.present = true;
 | |
| -		mcore->pflash.buswidth = 2;
 | |
| -		mcore->pflash.window = SSB_FLASH1;
 | |
| -		mcore->pflash.window_size = SSB_FLASH1_SZ;
 | |
| -		return;
 | |
| +		pflash->present = true;
 | |
| +		pflash->buswidth = 2;
 | |
| +		pflash->window = SSB_FLASH1;
 | |
| +		pflash->window_size = SSB_FLASH1_SZ;
 | |
| +		goto ssb_pflash;
 | |
|  	}
 | |
|  
 | |
|  	/* There is ChipCommon, so use it to read info about flash */
 | |
|  	switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) {
 | |
|  	case SSB_CHIPCO_FLASHT_STSER:
 | |
|  	case SSB_CHIPCO_FLASHT_ATSER:
 | |
| -		pr_err("Serial flash not supported\n");
 | |
| +		pr_debug("Found serial flash\n");
 | |
| +		ssb_sflash_init(&bus->chipco);
 | |
|  		break;
 | |
|  	case SSB_CHIPCO_FLASHT_PARA:
 | |
|  		pr_debug("Found parallel flash\n");
 | |
| -		mcore->pflash.present = true;
 | |
| -		mcore->pflash.window = SSB_FLASH2;
 | |
| -		mcore->pflash.window_size = SSB_FLASH2_SZ;
 | |
| +		pflash->present = true;
 | |
| +		pflash->window = SSB_FLASH2;
 | |
| +		pflash->window_size = SSB_FLASH2_SZ;
 | |
|  		if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG)
 | |
|  		               & SSB_CHIPCO_CFG_DS16) == 0)
 | |
| -			mcore->pflash.buswidth = 1;
 | |
| +			pflash->buswidth = 1;
 | |
|  		else
 | |
| -			mcore->pflash.buswidth = 2;
 | |
| +			pflash->buswidth = 2;
 | |
|  		break;
 | |
|  	}
 | |
| +
 | |
| +ssb_pflash:
 | |
| +	if (pflash->present) {
 | |
| +		ssb_pflash_data.width = pflash->buswidth;
 | |
| +		ssb_pflash_resource.start = pflash->window;
 | |
| +		ssb_pflash_resource.end = pflash->window + pflash->window_size;
 | |
| +	}
 | |
|  }
 | |
|  
 | |
|  u32 ssb_cpu_clock(struct ssb_mipscore *mcore)
 | |
| --- a/drivers/ssb/main.c
 | |
| +++ b/drivers/ssb/main.c
 | |
| @@ -549,6 +549,14 @@ static int ssb_devices_register(struct s
 | |
|  		dev_idx++;
 | |
|  	}
 | |
|  
 | |
| +#ifdef CONFIG_SSB_DRIVER_MIPS
 | |
| +	if (bus->mipscore.pflash.present) {
 | |
| +		err = platform_device_register(&ssb_pflash_dev);
 | |
| +		if (err)
 | |
| +			pr_err("Error registering parallel flash\n");
 | |
| +	}
 | |
| +#endif
 | |
| +
 | |
|  	return 0;
 | |
|  error:
 | |
|  	/* Unwind the already registered devices. */
 | |
| --- a/drivers/ssb/ssb_private.h
 | |
| +++ b/drivers/ssb/ssb_private.h
 | |
| @@ -217,6 +217,21 @@ extern u32 ssb_chipco_watchdog_timer_set
 | |
|  					     u32 ticks);
 | |
|  extern u32 ssb_chipco_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
 | |
|  
 | |
| +/* driver_chipcommon_sflash.c */
 | |
| +#ifdef CONFIG_SSB_SFLASH
 | |
| +int ssb_sflash_init(struct ssb_chipcommon *cc);
 | |
| +#else
 | |
| +static inline int ssb_sflash_init(struct ssb_chipcommon *cc)
 | |
| +{
 | |
| +	pr_err("Serial flash not supported\n");
 | |
| +	return 0;
 | |
| +}
 | |
| +#endif /* CONFIG_SSB_SFLASH */
 | |
| +
 | |
| +#ifdef CONFIG_SSB_DRIVER_MIPS
 | |
| +extern struct platform_device ssb_pflash_dev;
 | |
| +#endif
 | |
| +
 | |
|  #ifdef CONFIG_SSB_DRIVER_EXTIF
 | |
|  extern u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks);
 | |
|  extern u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
 | |
| --- a/include/linux/ssb/ssb_driver_mips.h
 | |
| +++ b/include/linux/ssb/ssb_driver_mips.h
 | |
| @@ -45,6 +45,11 @@ void ssb_mipscore_init(struct ssb_mipsco
 | |
|  {
 | |
|  }
 | |
|  
 | |
| +static inline unsigned int ssb_mips_irq(struct ssb_device *dev)
 | |
| +{
 | |
| +	return 0;
 | |
| +}
 | |
| +
 | |
|  #endif /* CONFIG_SSB_DRIVER_MIPS */
 | |
|  
 | |
|  #endif /* LINUX_SSB_MIPSCORE_H_ */
 |