mirror of
				git://git.openwrt.org/openwrt/openwrt.git
				synced 2025-10-31 14:04:26 -04:00 
			
		
		
		
	Targets were build tested and patches are refreshed. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 42463
		
			
				
	
	
		
			345 lines
		
	
	
		
			9.0 KiB
		
	
	
	
		
			Diff
		
	
	
	
	
	
			
		
		
	
	
			345 lines
		
	
	
		
			9.0 KiB
		
	
	
	
		
			Diff
		
	
	
	
	
	
| From 49ff47db168655cac5213cf5dd1844b08fb9823c Mon Sep 17 00:00:00 2001
 | |
| From: Hans de Goede <hdegoede@redhat.com>
 | |
| Date: Sun, 5 Jan 2014 14:42:39 +0100
 | |
| Subject: [PATCH] ohci-platform: Add support for devicetree instantiation
 | |
| 
 | |
| Add support for ohci-platform instantiation from devicetree, including
 | |
| optionally getting clks and a phy from devicetree, and enabling / disabling
 | |
| those on power_on / off.
 | |
| 
 | |
| This should allow using ohci-platform from devicetree in various cases.
 | |
| Specifically after this commit it can be used for the ohci controller found
 | |
| on Allwinner sunxi SoCs.
 | |
| 
 | |
| Signed-off-by: Hans de Goede <hdegoede@redhat.com>
 | |
| Acked-by: Alan Stern <stern@rowland.harvard.edu>
 | |
| ---
 | |
|  Documentation/devicetree/bindings/usb/usb-ohci.txt |  22 +++
 | |
|  drivers/usb/host/ohci-platform.c                   | 162 ++++++++++++++++++---
 | |
|  2 files changed, 162 insertions(+), 22 deletions(-)
 | |
|  create mode 100644 Documentation/devicetree/bindings/usb/usb-ohci.txt
 | |
| 
 | |
| --- /dev/null
 | |
| +++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt
 | |
| @@ -0,0 +1,25 @@
 | |
| +USB OHCI controllers
 | |
| +
 | |
| +Required properties:
 | |
| +- compatible : "generic-ohci"
 | |
| +- reg : ohci controller register range (address and length)
 | |
| +- interrupts : ohci controller interrupt
 | |
| +
 | |
| +Optional properties:
 | |
| +- big-endian-regs : boolean, set this for hcds with big-endian registers
 | |
| +- big-endian-desc : boolean, set this for hcds with big-endian descriptors
 | |
| +- big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
 | |
| +- clocks : a list of phandle + clock specifier pairs
 | |
| +- phys : phandle + phy specifier pair
 | |
| +- phy-names : "usb"
 | |
| +
 | |
| +Example:
 | |
| +
 | |
| +	ohci0: usb@01c14400 {
 | |
| +		compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
 | |
| +		reg = <0x01c14400 0x100>;
 | |
| +		interrupts = <64>;
 | |
| +		clocks = <&usb_clk 6>, <&ahb_gates 2>;
 | |
| +		phys = <&usbphy 1>;
 | |
| +		phy-names = "usb";
 | |
| +	};
 | |
| --- a/drivers/usb/host/ohci-platform.c
 | |
| +++ b/drivers/usb/host/ohci-platform.c
 | |
| @@ -3,6 +3,7 @@
 | |
|   *
 | |
|   * Copyright 2007 Michael Buesch <m@bues.ch>
 | |
|   * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de>
 | |
| + * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
 | |
|   *
 | |
|   * Derived from the OCHI-SSB driver
 | |
|   * Derived from the OHCI-PCI driver
 | |
| @@ -14,11 +15,14 @@
 | |
|   * Licensed under the GNU/GPL. See COPYING for details.
 | |
|   */
 | |
|  
 | |
| +#include <linux/clk.h>
 | |
| +#include <linux/dma-mapping.h>
 | |
|  #include <linux/hrtimer.h>
 | |
|  #include <linux/io.h>
 | |
|  #include <linux/kernel.h>
 | |
|  #include <linux/module.h>
 | |
|  #include <linux/err.h>
 | |
| +#include <linux/phy/phy.h>
 | |
|  #include <linux/platform_device.h>
 | |
|  #include <linux/usb/ohci_pdriver.h>
 | |
|  #include <linux/usb.h>
 | |
| @@ -27,6 +31,13 @@
 | |
|  #include "ohci.h"
 | |
|  
 | |
|  #define DRIVER_DESC "OHCI generic platform driver"
 | |
| +#define OHCI_MAX_CLKS 3
 | |
| +#define hcd_to_ohci_priv(h) ((struct ohci_platform_priv *)hcd_to_ohci(h)->priv)
 | |
| +
 | |
| +struct ohci_platform_priv {
 | |
| +	struct clk *clks[OHCI_MAX_CLKS];
 | |
| +	struct phy *phy;
 | |
| +};
 | |
|  
 | |
|  static const char hcd_name[] = "ohci-platform";
 | |
|  
 | |
| @@ -48,11 +59,67 @@ static int ohci_platform_reset(struct us
 | |
|  	return ohci_setup(hcd);
 | |
|  }
 | |
|  
 | |
| +static int ohci_platform_power_on(struct platform_device *dev)
 | |
| +{
 | |
| +	struct usb_hcd *hcd = platform_get_drvdata(dev);
 | |
| +	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
 | |
| +	int clk, ret;
 | |
| +
 | |
| +	for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++) {
 | |
| +		ret = clk_prepare_enable(priv->clks[clk]);
 | |
| +		if (ret)
 | |
| +			goto err_disable_clks;
 | |
| +	}
 | |
| +
 | |
| +	if (priv->phy) {
 | |
| +		ret = phy_init(priv->phy);
 | |
| +		if (ret)
 | |
| +			goto err_disable_clks;
 | |
| +
 | |
| +		ret = phy_power_on(priv->phy);
 | |
| +		if (ret)
 | |
| +			goto err_exit_phy;
 | |
| +	}
 | |
| +
 | |
| +	return 0;
 | |
| +
 | |
| +err_exit_phy:
 | |
| +	phy_exit(priv->phy);
 | |
| +err_disable_clks:
 | |
| +	while (--clk >= 0)
 | |
| +		clk_disable_unprepare(priv->clks[clk]);
 | |
| +
 | |
| +	return ret;
 | |
| +}
 | |
| +
 | |
| +static void ohci_platform_power_off(struct platform_device *dev)
 | |
| +{
 | |
| +	struct usb_hcd *hcd = platform_get_drvdata(dev);
 | |
| +	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
 | |
| +	int clk;
 | |
| +
 | |
| +	if (priv->phy) {
 | |
| +		phy_power_off(priv->phy);
 | |
| +		phy_exit(priv->phy);
 | |
| +	}
 | |
| +
 | |
| +	for (clk = OHCI_MAX_CLKS - 1; clk >= 0; clk--)
 | |
| +		if (priv->clks[clk])
 | |
| +			clk_disable_unprepare(priv->clks[clk]);
 | |
| +}
 | |
| +
 | |
|  static struct hc_driver __read_mostly ohci_platform_hc_driver;
 | |
|  
 | |
|  static const struct ohci_driver_overrides platform_overrides __initconst = {
 | |
| -	.product_desc =	"Generic Platform OHCI controller",
 | |
| -	.reset =	ohci_platform_reset,
 | |
| +	.product_desc =		"Generic Platform OHCI controller",
 | |
| +	.reset =		ohci_platform_reset,
 | |
| +	.extra_priv_size =	sizeof(struct ohci_platform_priv),
 | |
| +};
 | |
| +
 | |
| +static struct usb_ohci_pdata ohci_platform_defaults = {
 | |
| +	.power_on =		ohci_platform_power_on,
 | |
| +	.power_suspend =	ohci_platform_power_off,
 | |
| +	.power_off =		ohci_platform_power_off,
 | |
|  };
 | |
|  
 | |
|  static int ohci_platform_probe(struct platform_device *dev)
 | |
| @@ -60,17 +127,24 @@ static int ohci_platform_probe(struct pl
 | |
|  	struct usb_hcd *hcd;
 | |
|  	struct resource *res_mem;
 | |
|  	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
 | |
| -	int irq;
 | |
| -	int err = -ENOMEM;
 | |
| -
 | |
| -	if (!pdata) {
 | |
| -		WARN_ON(1);
 | |
| -		return -ENODEV;
 | |
| -	}
 | |
| +	struct ohci_platform_priv *priv;
 | |
| +	struct ohci_hcd *ohci;
 | |
| +	int err, irq, clk = 0;
 | |
|  
 | |
|  	if (usb_disabled())
 | |
|  		return -ENODEV;
 | |
|  
 | |
| +	/*
 | |
| +	 * Use reasonable defaults so platforms don't have to provide these
 | |
| +	 * with DT probing on ARM.
 | |
| +	 */
 | |
| +	if (!pdata)
 | |
| +		pdata = &ohci_platform_defaults;
 | |
| +
 | |
| +	err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
 | |
| +	if (err)
 | |
| +		return err;
 | |
| +
 | |
|  	irq = platform_get_irq(dev, 0);
 | |
|  	if (irq < 0) {
 | |
|  		dev_err(&dev->dev, "no irq provided");
 | |
| @@ -83,17 +157,66 @@ static int ohci_platform_probe(struct pl
 | |
|  		return -ENXIO;
 | |
|  	}
 | |
|  
 | |
| +	hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev,
 | |
| +			dev_name(&dev->dev));
 | |
| +	if (!hcd)
 | |
| +		return -ENOMEM;
 | |
| +
 | |
| +	platform_set_drvdata(dev, hcd);
 | |
| +	dev->dev.platform_data = pdata;
 | |
| +	priv = hcd_to_ohci_priv(hcd);
 | |
| +	ohci = hcd_to_ohci(hcd);
 | |
| +
 | |
| +	if (pdata == &ohci_platform_defaults && dev->dev.of_node) {
 | |
| +		if (of_property_read_bool(dev->dev.of_node, "big-endian-regs"))
 | |
| +			ohci->flags |= OHCI_QUIRK_BE_MMIO;
 | |
| +
 | |
| +		if (of_property_read_bool(dev->dev.of_node, "big-endian-desc"))
 | |
| +			ohci->flags |= OHCI_QUIRK_BE_DESC;
 | |
| +
 | |
| +		if (of_property_read_bool(dev->dev.of_node, "big-endian"))
 | |
| +			ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC;
 | |
| +
 | |
| +#ifndef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
 | |
| +		if (ohci->flags & OHCI_QUIRK_BE_MMIO) {
 | |
| +			dev_err(&dev->dev,
 | |
| +				"Error big-endian-regs not compiled in\n");
 | |
| +			err = -EINVAL;
 | |
| +			goto err_put_hcd;
 | |
| +		}
 | |
| +#endif
 | |
| +#ifndef CONFIG_USB_OHCI_BIG_ENDIAN_DESC
 | |
| +		if (ohci->flags & OHCI_QUIRK_BE_DESC) {
 | |
| +			dev_err(&dev->dev,
 | |
| +				"Error big-endian-desc not compiled in\n");
 | |
| +			err = -EINVAL;
 | |
| +			goto err_put_hcd;
 | |
| +		}
 | |
| +#endif
 | |
| +		priv->phy = devm_phy_get(&dev->dev, "usb");
 | |
| +		if (IS_ERR(priv->phy)) {
 | |
| +			err = PTR_ERR(priv->phy);
 | |
| +			if (err == -EPROBE_DEFER)
 | |
| +				goto err_put_hcd;
 | |
| +			priv->phy = NULL;
 | |
| +		}
 | |
| +
 | |
| +		for (clk = 0; clk < OHCI_MAX_CLKS; clk++) {
 | |
| +			priv->clks[clk] = of_clk_get(dev->dev.of_node, clk);
 | |
| +			if (IS_ERR(priv->clks[clk])) {
 | |
| +				err = PTR_ERR(priv->clks[clk]);
 | |
| +				if (err == -EPROBE_DEFER)
 | |
| +					goto err_put_clks;
 | |
| +				priv->clks[clk] = NULL;
 | |
| +				break;
 | |
| +			}
 | |
| +		}
 | |
| +	}
 | |
| +
 | |
|  	if (pdata->power_on) {
 | |
|  		err = pdata->power_on(dev);
 | |
|  		if (err < 0)
 | |
| -			return err;
 | |
| -	}
 | |
| -
 | |
| -	hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev,
 | |
| -			dev_name(&dev->dev));
 | |
| -	if (!hcd) {
 | |
| -		err = -ENOMEM;
 | |
| -		goto err_power;
 | |
| +			goto err_put_clks;
 | |
|  	}
 | |
|  
 | |
|  	hcd->rsrc_start = res_mem->start;
 | |
| @@ -102,11 +225,11 @@ static int ohci_platform_probe(struct pl
 | |
|  	hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
 | |
|  	if (IS_ERR(hcd->regs)) {
 | |
|  		err = PTR_ERR(hcd->regs);
 | |
| -		goto err_put_hcd;
 | |
| +		goto err_power;
 | |
|  	}
 | |
|  	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
 | |
|  	if (err)
 | |
| -		goto err_put_hcd;
 | |
| +		goto err_power;
 | |
|  
 | |
|  	device_wakeup_enable(hcd->self.controller);
 | |
|  
 | |
| @@ -114,11 +237,17 @@ static int ohci_platform_probe(struct pl
 | |
|  
 | |
|  	return err;
 | |
|  
 | |
| -err_put_hcd:
 | |
| -	usb_put_hcd(hcd);
 | |
|  err_power:
 | |
|  	if (pdata->power_off)
 | |
|  		pdata->power_off(dev);
 | |
| +err_put_clks:
 | |
| +	while (--clk >= 0)
 | |
| +		clk_put(priv->clks[clk]);
 | |
| +err_put_hcd:
 | |
| +	if (pdata == &ohci_platform_defaults)
 | |
| +		dev->dev.platform_data = NULL;
 | |
| +
 | |
| +	usb_put_hcd(hcd);
 | |
|  
 | |
|  	return err;
 | |
|  }
 | |
| @@ -127,13 +256,22 @@ static int ohci_platform_remove(struct p
 | |
|  {
 | |
|  	struct usb_hcd *hcd = platform_get_drvdata(dev);
 | |
|  	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
 | |
| +	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
 | |
| +	int clk;
 | |
|  
 | |
|  	usb_remove_hcd(hcd);
 | |
| -	usb_put_hcd(hcd);
 | |
|  
 | |
|  	if (pdata->power_off)
 | |
|  		pdata->power_off(dev);
 | |
|  
 | |
| +	for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++)
 | |
| +		clk_put(priv->clks[clk]);
 | |
| +
 | |
| +	usb_put_hcd(hcd);
 | |
| +
 | |
| +	if (pdata == &ohci_platform_defaults)
 | |
| +		dev->dev.platform_data = NULL;
 | |
| +
 | |
|  	return 0;
 | |
|  }
 | |
|  
 | |
| @@ -180,6 +318,12 @@ static int ohci_platform_resume(struct d
 | |
|  #define ohci_platform_resume	NULL
 | |
|  #endif /* CONFIG_PM */
 | |
|  
 | |
| +static const struct of_device_id ohci_platform_ids[] = {
 | |
| +	{ .compatible = "generic-ohci", },
 | |
| +	{ }
 | |
| +};
 | |
| +MODULE_DEVICE_TABLE(of, ohci_platform_ids);
 | |
| +
 | |
|  static const struct platform_device_id ohci_platform_table[] = {
 | |
|  	{ "ohci-platform", 0 },
 | |
|  	{ }
 | |
| @@ -200,6 +344,7 @@ static struct platform_driver ohci_platf
 | |
|  		.owner	= THIS_MODULE,
 | |
|  		.name	= "ohci-platform",
 | |
|  		.pm	= &ohci_platform_pm_ops,
 | |
| +		.of_match_table = ohci_platform_ids,
 | |
|  	}
 | |
|  };
 | |
|  
 |