Rafał Miłecki a6a0b252ba bcm4908: add sysupgrade support ... It supports flashing OpenWrt images (bootfs & UBI upgrade) as well as vendor images (whole MTD partition write). Upgrading cferom is unsupported. It requires copying device specific data (like MAC) to target image before flashing. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>		2021-04-07 14:44:20 +02:00
..
base-files	bcm4908: add sysupgrade support	2021-04-07 14:44:20 +02:00
files-5.4/drivers/net/ethernet/broadcom	bcm4908: add Ethernet driver	2021-02-08 11:49:21 +01:00
generic	bcm4908: initial work on the Broadcom BCM4908 target	2021-01-12 21:10:51 +01:00
image	bcm4908: pad firmware image bootfs JFFS2 partition to 8 MiB	2021-04-07 09:36:47 +02:00
patches-5.4	kernel: bump 5.4 to 5.4.109	2021-04-02 16:45:28 +02:00
config-5.4	bcm4908: enable JFFS2 support	2021-04-05 10:44:46 +02:00
Makefile	bcm4908: add USB packages to the DEFAULT_PACKAGES	2021-02-15 16:54:28 +01:00