mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2026-01-06 20:02:13 -05:00
5ab72cfc40
Specifications: - SoC: Broadcom BCM6358 dual 300MHz MIPS - Flash: 16MB NOR Spansion S29GL128P10 - RAM: 64MB DDR - Ethernet: 4x 100M - Wifi: Atheros AR9223 - 3x USB 2.0 port - 4x Button - 13x LED - RJ11 2x FXS VoIP (unsupported) - RJ11 xDSL (unsupported) Install instructions: - Assign static IP 192.168.1.100 to PC. - Unplug the power source. - Press the RESTART button at the router, don't release it yet! - Plug the power source and wait at least 15 seconds. - Release the RESTART button. - Browse to http://192.168.1.1 with your PC. - Upload the openwrt-bmips-bcm6358-huawei_hg556a-a-squashfs-cfe.bin file. - Wait some minutes until the firmware upgrade completes. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
30 lines
831 B
Makefile
30 lines
831 B
Makefile
# SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
define Device/huawei_hg556a-a
|
|
$(Device/bcm63xx-cfe-legacy)
|
|
DEVICE_VENDOR := Huawei
|
|
DEVICE_MODEL := EchoLife HG556a
|
|
DEVICE_VARIANT := A
|
|
CHIP_ID := 6358
|
|
CFE_BOARD_ID := HW556
|
|
CFE_EXTRAS += --rsa-signature "EchoLife_HG556a" --tag-version 8
|
|
IMAGE_OFFSET := 0x20000
|
|
DEVICE_PACKAGES += $(USB2_PACKAGES) $(ATH9K_PACKAGES) \
|
|
kmod-leds-gpio
|
|
endef
|
|
TARGET_DEVICES += huawei_hg556a-a
|
|
|
|
define Device/huawei_hg556a-b
|
|
$(Device/bcm63xx-cfe-legacy)
|
|
DEVICE_VENDOR := Huawei
|
|
DEVICE_MODEL := EchoLife HG556a
|
|
DEVICE_VARIANT := B
|
|
CHIP_ID := 6358
|
|
CFE_BOARD_ID := HW556
|
|
CFE_EXTRAS += --rsa-signature "EchoLife_HG556a" --tag-version 8
|
|
BLOCKSIZE := 0x20000
|
|
DEVICE_PACKAGES += $(USB2_PACKAGES) $(ATH9K_PACKAGES) \
|
|
kmod-leds-gpio
|
|
endef
|
|
TARGET_DEVICES += huawei_hg556a-b
|