mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2025-11-03 14:34:27 -05:00
cb49e46a8a
The Aerohive HiveAP 121 has the wrong PLL value set for Gigabit speeds, leading to packet-loss. 10M and 100M work fine. This commit sets the Gigabit Ethernet PLL value to the correct value, fixing packet loss. Confirmed with iperf and floodping. Signed-off-by: David Bauer <mail@david-bauer.net>
154 lines
4.2 KiB
C
154 lines
4.2 KiB
C
/*
|
|
* Aerohive HiveAP 121 board support
|
|
*
|
|
* Copyright (C) 2017 Chris Blake <chrisrblake93@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
#include <linux/gpio.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-gpio.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/ath9k_platform.h>
|
|
#include <linux/platform/ar934x_nfc.h>
|
|
#include <asm/mach-ath79/ath79.h>
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-nfc.h"
|
|
#include "dev-usb.h"
|
|
#include "dev-wmac.h"
|
|
#include "dev-ap9x-pci.h"
|
|
#include "dev-m25p80.h"
|
|
#include "machtypes.h"
|
|
|
|
#define HIVEAP_121_GPIO_LED_ORANGE 14
|
|
#define HIVEAP_121_GPIO_LED_WHITE 21
|
|
#define HIVEAP_121_GPIO_I2C_SCL 12
|
|
#define HIVEAP_121_GPIO_I2C_SDA 13
|
|
#define HIVEAP_121_GPIO_XLNA0 20
|
|
#define HIVEAP_121_GPIO_XLNA1 19
|
|
#define HIVEAP_121_GPIO_USB_POWER 15
|
|
|
|
#define HIVEAP_121_GPIO_BTN_RESET 4
|
|
#define HIVEAP_121_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define HIVEAP_121_KEYS_DEBOUNCE_INTERVAL \
|
|
(3 * HIVEAP_121_KEYS_POLL_INTERVAL)
|
|
|
|
#define HIVEAP_121_MAC_OFFSET 0x90000
|
|
|
|
#define HIVEAP_121_LAN_PHYADDR 0
|
|
|
|
static struct gpio_led hiveap_121_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "hiveap-121:orange:power",
|
|
.gpio = HIVEAP_121_GPIO_LED_ORANGE,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "hiveap-121:white:power",
|
|
.gpio = HIVEAP_121_GPIO_LED_WHITE,
|
|
.active_low = 1,
|
|
}
|
|
};
|
|
|
|
static struct gpio_keys_button hiveap_121_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "reset",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = HIVEAP_121_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = HIVEAP_121_GPIO_BTN_RESET,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct i2c_gpio_platform_data hiveap_121_i2c_gpio_data = {
|
|
.sda_pin = HIVEAP_121_GPIO_I2C_SDA,
|
|
.scl_pin = HIVEAP_121_GPIO_I2C_SCL,
|
|
};
|
|
|
|
static struct platform_device hiveap_121_i2c_gpio_device = {
|
|
.name = "i2c-gpio",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &hiveap_121_i2c_gpio_data,
|
|
}
|
|
};
|
|
|
|
static struct i2c_board_info tpm_i2c_info[] __initdata = {
|
|
{
|
|
I2C_BOARD_INFO("tpm_i2c_atmel", 0x29),
|
|
}
|
|
};
|
|
|
|
static void __init hiveap_121_setup(void)
|
|
{
|
|
u8 *base = (u8 *) KSEG1ADDR(0x1f000000);
|
|
u8 wlan0_mac[ETH_ALEN];
|
|
u8 wlan1_mac[ETH_ALEN];
|
|
|
|
/* NAND */
|
|
ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
|
|
ath79_register_nfc();
|
|
|
|
/* SPI */
|
|
ath79_register_m25p80(NULL);
|
|
|
|
/* MDIO Interface */
|
|
ath79_register_mdio(0, 0x0);
|
|
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
|
|
AR934X_ETH_CFG_RXD_DELAY |
|
|
AR934X_ETH_CFG_RDV_DELAY);
|
|
|
|
/* GMAC0 is connected to the RGMII interface to an Atheros AR8035-A */
|
|
ath79_init_mac(ath79_eth0_data.mac_addr,
|
|
base + HIVEAP_121_MAC_OFFSET, 0);
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
|
ath79_eth0_data.phy_mask = BIT(HIVEAP_121_LAN_PHYADDR);
|
|
ath79_eth0_pll_data.pll_1000 = 0x06000000;
|
|
ath79_eth0_pll_data.pll_100 = 0x00000101;
|
|
ath79_eth0_pll_data.pll_10 = 0x00001313;
|
|
ath79_register_eth(0);
|
|
|
|
/* i2c */
|
|
ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
|
|
platform_device_register(&hiveap_121_i2c_gpio_device);
|
|
|
|
/* TPM */
|
|
i2c_register_board_info(0, tpm_i2c_info, ARRAY_SIZE(tpm_i2c_info));
|
|
|
|
/* LEDs and Buttons */
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(hiveap_121_leds_gpio),
|
|
hiveap_121_leds_gpio);
|
|
ath79_register_gpio_keys_polled(-1, HIVEAP_121_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(hiveap_121_gpio_keys),
|
|
hiveap_121_gpio_keys);
|
|
|
|
/* USB */
|
|
gpio_request_one(HIVEAP_121_GPIO_USB_POWER,
|
|
GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
|
|
"USB power");
|
|
ath79_register_usb();
|
|
|
|
/* XLNA - SoC Wireless */
|
|
ath79_wmac_set_ext_lna_gpio(0, HIVEAP_121_GPIO_XLNA0);
|
|
ath79_wmac_set_ext_lna_gpio(1, HIVEAP_121_GPIO_XLNA1);
|
|
|
|
/* SoC Wireless */
|
|
ath79_init_mac(wlan0_mac, base + HIVEAP_121_MAC_OFFSET, 1);
|
|
ath79_register_wmac(NULL, wlan0_mac); /* Caldata in OTP */
|
|
|
|
/* PCIe Wireless */
|
|
ath79_init_mac(wlan1_mac, base + HIVEAP_121_MAC_OFFSET, 2);
|
|
ap91_pci_init(NULL, wlan1_mac); /* Caldata in OTP */
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_HIVEAP_121, "HiveAP-121", "Aerohive HiveAP-121",
|
|
hiveap_121_setup);
|