mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2025-11-03 14:34:27 -05:00
deb66a555e
This patch is a follow up for my previous patch: "ramips: add support for Intenso Memory 2 Move USB 3.0". It fixes a couple of errors in the DTS (one of which broke the gpio-buttons). The kmod-leds-gpio dependency has been dropped as it is already part of the ramips target. Furthermore the ramdisk/uImage image is generated by default for the rt3050 subtarget. This image is needed to flash OpenWrt for the first time onto the device via TFTP. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> SVN-Revision: 44072
108 lines
1.7 KiB
Plaintext
108 lines
1.7 KiB
Plaintext
/dts-v1/;
|
|
|
|
/include/ "rt5350.dtsi"
|
|
|
|
/ {
|
|
compatible = "M2M", "ralink,rt5350-soc";
|
|
model = "Intenso Memory 2 Move";
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,57600n8 root=/dev/mtdblock5";
|
|
};
|
|
|
|
palmbus@10000000 {
|
|
spi@b00 {
|
|
status = "okay";
|
|
m25p80@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "mx25l6405d";
|
|
reg = <0 0>;
|
|
linux,modalias = "m25p80", "mx25l6405d";
|
|
spi-max-frequency = <10000000>;
|
|
|
|
partition@0 {
|
|
label = "Bootloader";
|
|
reg = <0x0 0x30000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@30000 {
|
|
label = "Config";
|
|
reg = <0x30000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
factory: partition@40000 {
|
|
label = "Factory";
|
|
reg = <0x40000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@50000 {
|
|
label = "firmware";
|
|
reg = <0x50000 0x7b0000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
pinctrl {
|
|
state_default: pinctrl0 {
|
|
gpio {
|
|
ralink,group = "i2c", "uartf";
|
|
ralink,function = "gpio";
|
|
};
|
|
};
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
wifi {
|
|
label = "m2m:blue:wifi";
|
|
gpios = <&gpio0 7 1>;
|
|
};
|
|
wan {
|
|
label = "m2m:green:wan";
|
|
gpios = <&gpio0 12 1>;
|
|
};
|
|
};
|
|
|
|
gpio-keys-polled {
|
|
compatible = "gpio-keys-polled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
poll-interval = <20>;
|
|
power {
|
|
label = "power";
|
|
gpios = <&gpio0 1 1>;
|
|
linux,code = <0x116>;
|
|
};
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&gpio0 10 1>;
|
|
linux,code = <0x198>;
|
|
};
|
|
};
|
|
|
|
ethernet@10100000 {
|
|
mtd-mac-address = <&factory 0x28>;
|
|
};
|
|
|
|
esw@10110000 {
|
|
ralink,portmap = <0x2f>;
|
|
};
|
|
|
|
ehci@101c0000 {
|
|
status = "okay";
|
|
};
|
|
|
|
ohci@101c1000 {
|
|
status = "okay";
|
|
};
|
|
|
|
wmac@10180000 {
|
|
ralink,mtd-eeprom = <&factory 0x0>;
|
|
};
|
|
};
|