Petr Štetiar 8ba6e95eed ramips: bdcom-wap2100: Enable mt7610e 5GHz radio ... The 5GHz radio of this device uses an mt7610e PCI-E chip, which has been recently started to be supported. mt76x0e 0000:01:00.0: card - bus=0x1, slot = 0x0 irq=4 mt76x0e 0000:01:00.0: ASIC revision: 76100002 mt76x0e 0000:01:00.0: Firmware Version: 0.1.00 mt76x0e 0000:01:00.0: EEPROM ver:01 fae:00 Signed-off-by: Petr Štetiar <ynezz@true.cz>		2018-11-28 23:37:29 +01:00
..
base-files	ramips: fix switch port order for HuaWei HG255D	2018-11-28 01:11:38 +01:00
dts	ramips: bdcom-wap2100: Enable mt7610e 5GHz radio	2018-11-28 23:37:29 +01:00
files-4.14/drivers	ramips: mt7620: add force use of mdio-mode	2018-11-26 12:16:52 +01:00
image	ramips: bdcom-wap2100: Enable mt7610e 5GHz radio	2018-11-28 23:37:29 +01:00
mt76x8	treewide: use wpad-basic for not small flash targets	2018-10-16 15:07:41 +01:00
mt7620	ramips: add support for Lava LR-25G001	2018-11-26 12:16:52 +01:00
mt7621	ramips: refresh mt7621 kernel config	2018-10-15 12:54:12 +02:00
patches-4.14	ralink: fix mt7620 nd_sd pinmux	2018-11-26 15:54:22 +01:00
rt288x	kernel: only optimized for size if small_flash	2018-07-12 18:15:32 +02:00
rt305x	kernel: only optimized for size if small_flash	2018-07-12 18:15:32 +02:00
rt3883	kernel: only optimized for size if small_flash	2018-07-12 18:15:32 +02:00
Makefile	ramips: switch to linux 4.14	2018-04-06 18:07:43 +02:00
modules.mk	ramips: rename pwm kernel module	2018-04-08 12:35:33 +02:00