openwrt-mirror/target/linux/generic/files/drivers/net/phy
Rafał Miłecki 8072223347 kernel: b53: force BCM531x5 port 5 link state if enabled
Some devices (e.g. Tenda AC9 based on BCM47189B0) have BCM53125 with
port 5 connected to the second Ethernet interface on the SoC. In such
case there is no PHY and we need to force link manually.

This assumes port 5 can be marked as enabled for such devices. It's not
implemented yet unfortunately.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-09-08 23:03:46 +02:00
..
b53 kernel: b53: force BCM531x5 port 5 link state if enabled 2016-09-08 23:03:46 +02:00
adm6996.c kernel: adm6996: set carrier status 2016-08-10 03:04:08 +02:00
adm6996.h treewide: replace nbd@openwrt.org with nbd@nbd.name 2016-06-07 08:58:42 +02:00
ar8216.c treewide: replace nbd@openwrt.org with nbd@nbd.name 2016-06-07 08:58:42 +02:00
ar8216.h treewide: replace nbd@openwrt.org with nbd@nbd.name 2016-06-07 08:58:42 +02:00
ar8327.c treewide: replace nbd@openwrt.org with nbd@nbd.name 2016-06-07 08:58:42 +02:00
ar8327.h treewide: replace nbd@openwrt.org with nbd@nbd.name 2016-06-07 08:58:42 +02:00
ip17xx.c treewide: replace nbd@openwrt.org with nbd@nbd.name 2016-06-07 08:58:42 +02:00
mvsw61xx.c treewide: replace nbd@openwrt.org with nbd@nbd.name 2016-06-07 08:58:42 +02:00
mvsw61xx.h treewide: replace nbd@openwrt.org with nbd@nbd.name 2016-06-07 08:58:42 +02:00
mvswitch.c treewide: replace nbd@openwrt.org with nbd@nbd.name 2016-06-07 08:58:42 +02:00
mvswitch.h treewide: replace nbd@openwrt.org with nbd@nbd.name 2016-06-07 08:58:42 +02:00
psb6970.c
rtl8306.c treewide: replace nbd@openwrt.org with nbd@nbd.name 2016-06-07 08:58:42 +02:00
rtl8366_smi.c strict_strtoul is obsolete, use kstrtoul instead 2013-07-27 09:23:18 +00:00
rtl8366_smi.h linux: generic: rtl836*: fix compilation with !CONFIG_OF 2012-12-15 13:32:02 +00:00
rtl8366rb.c generic: add port mirroring/monitoring capability to rtl8366rb switch 2013-06-04 13:25:52 +00:00
rtl8366s.c fix rtl8366s OF binding 2013-04-12 18:56:05 +00:00
rtl8367.c rtl8367: add support for configuring the VLAN FID 2013-08-12 17:25:25 +00:00
rtl8367b.c generic: rtl8367: add compatible string with vendor prefix 2013-04-06 17:19:31 +00:00
swconfig_leds.c switch: allow Ethernet port LEDs to show specific port speeds only 2016-02-25 13:31:26 +00:00
swconfig.c swconfig: revert the portmapping patches, they seem to cause a segfault 2016-08-16 10:20:01 +02:00