Thibaut VARENE 7fb11c8ed2 ramips: add support for Netgear WN3000RPv3 ... This patch adds support for the Netgear WN3000RPv3 http://www.netgear.com/support/product/wn3000rpv3.aspx Specifications: - SoC: MediaTek MT7620A (580MHz, ramips) - RAM: 32MB DDR - Storage: 8MB NOR SPI flash - Wireless: builtin MT7620A, 2x2:2 with u.FL connectors - Ethernet: 1x100M - Serial: JP1 header, 57600-8N1 - Stock firmware based on OpenWRT Kamikaze Like the EX2700, the bootloader expects a secondary image signature, see https://forum.openwrt.org/viewtopic.php?pid=312577#p312577 This is why the same fakeroot image is used for the WN3000 Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>		2017-01-18 12:06:16 +01:00
..
base-files	ramips: add support for Netgear WN3000RPv3	2017-01-18 12:06:16 +01:00
dts	ramips: add support for Netgear WN3000RPv3	2017-01-18 12:06:16 +01:00
image	ramips: add support for Netgear WN3000RPv3	2017-01-18 12:06:16 +01:00
mt7620	switch to the new usbport LED trigger	2016-10-19 12:09:45 +02:00
mt7621	ramips: Add I2C driver to the default kernel config	2017-01-15 17:43:05 +01:00
mt7628	switch to the new usbport LED trigger	2016-10-19 12:09:45 +02:00
mt7688	switch to the new usbport LED trigger	2016-10-19 12:09:45 +02:00
patches-4.4	kernel: backport MIPS changes introducing a separate IRQ stack	2017-01-15 18:25:54 +01:00
rt288x	ramips: add support for PCI based OHCI/EHCI support for F5D8235 V1	2016-12-04 07:03:17 +01:00
rt305x	switch to the new usbport LED trigger	2016-10-19 12:09:45 +02:00
rt3883	ramips: enable 4K sector support in kernel config	2016-09-13 22:06:08 +02:00
Makefile	build: fix subtarget descriptions	2016-09-04 13:35:11 +02:00
modules.mk	ramips: add back the i2c-mt7621 module	2017-01-15 20:45:59 +01:00