mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2026-01-20 10:42:09 -05:00
65215e6d46
Hardware: - SoC: MediaTek MT7628DAN - Flash: 8 MiB XMC 25QH64CHIQ - RAM: 64 MiB (integrated on SoC) - WLAN: 2.4 GHz (MT7603E, 11n), 5 GHz (MediaTek MT7613BEN, 11ac) - Ethernet: 1x10/100 Mbps LAN - Buttons: 1 Reset button, 1 WPS button - LEDs: 5x Green - Serial Console: unpopulated header 115200 8n1 - Power: 24v Passive POE MAC addresses: +---------+-------------------+-----------+ | | MAC | Algorithm | +---------+-------------------+-----------+ | LAN | 80:af:ca:xx:xx:x0 | label | | WLAN 2g | 80:af:ca:xx:xx:x0 | label | | WLAN 5g | 80:af:ca:xx:xx:x2 | +2 | +---------+-------------------+-----------+ Installation: Please check the Wiki for this device for a more convenient solution than the one below. 1. Disassemble the device, desolder and dump the flash chip with a SPI programmer. 2. Separate the partitions with dd: dd if=spi_dump.bin of=u-boot.bin bs=1 skip=0 count=196608 status=progress dd if=spi_dump.bin of=u-boot-env.bin bs=1 skip=196608 count=65536 status=progress dd if=spi_dump.bin of=factory.bin bs=1 skip=262144 count=65536 status=progress dd if=spi_dump.bin of=firmware.bin bs=1 skip=327680 count=7995392 status=progress dd if=spi_dump.bin of=bdinfo.bin bs=1 skip=8323072 count=65536 status=progress 3. Download the sysupgrade firmware at openwrt.bin. 4. The firmware size should be 7995392 bytes. Fix the size of your firmware putting zeros to the end, with: truncate -s 7995392 firmware.bin 5. Combine all the parititions: cat u-boot.bin u-boot-env.bin factory.bin openwrt.bin bdinfo.bin > spi_new.bin 6. Erase and flash the SPI chip with the new file. Solder the chip and boot the router. Signed-off-by: Luis Mita <luis@luismita.com> Link: https://github.com/openwrt/openwrt/pull/20381 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> |
||
|---|---|---|
| .. | ||
| base-files | ||
| config-6.12 | ||
| target.mk | ||