mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2025-12-16 01:22:10 -05:00
71ebc54d2a
This commit adds support for TP-LINK BE450.
Device specification
--------------------
SoC Type: MediaTek MT7988D, Cortex-A73, 64-bit
RAM: 512MB
Flash: SPI NAND GigaDevice (128 MiB)
Ethernet: MediaTek MT7531AE (3 Ports) + 2.5GbE (internal MT7988 phy) + 10GbE (RTL8261N)
WLAN: MT7992
WLAN 2g: MediaTek MT7975N, b/g/n/ax/be, MIMO 4x4
WLAN 5g: MediaTek MT7979N, a/n/ac/ax/be, MIMO 4x4
LEDs: 8 LEDs, 1 status blue, 2x WIFI blue, 2x Internet
blue/orange, 1 LAN blue, 1 usb blue, 1 wps blue, gpio-controlled
Button: 2 (Reset, WPS)
USB port: Yes
Power: 12 VDC, 2 A
Connector: Barrel
Bootloader: Main U-Boot - U-Boot 2023.10-rc4. Additionally, ubi0
partition contain "seconduboot" (also U-Boot 2023.10-rc4)
Serial console (UART), unpopulated, located near the power connector
---------------------
heatsink
| |
| |
| | +----+-----+------+-------+ +-----------------+
| | | TX | RX | GND | +3.3V | | power connector |
+---+ +----+-----+------+-------+ +-----------------+
|
Don't connect ----+
Disassemble: rm the 2 screws at the bottom and the one at the backside.
un-clip the case starting at the edge above the LEDs.
Installation (UART)
-------------------
1. Place OpenWrt initramfs image on tftp server with IP 192.168.1.2
2. Attach UART, switch on the router and interrupt the boot process by
pressing 'Ctrl-C'
3. Load and run OpenWrt initramfs image:
tftpboot 0x50000000 openwrt-mediatek-filogic-tplink_be450-initramfs-kernel.bin && bootm 0x50000000
4. Run 'sysupgrade -n' with the sysupgrade OpenWrt image
Note: the 10GbE (RTL8261N) is only working if reverting this Realtek target specific commit:
b77fa45d12
The second ubi partition (ubi1) is empty and there is no known
dual-partition mechanism, neither in u-boot nor in the stock firmware.
NMBM is not used.
Not Working: WED, if activated, MT7992 isn't recognized any more.
Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de>
Link: https://github.com/openwrt/openwrt/pull/20398
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
158 lines
3.6 KiB
Plaintext
158 lines
3.6 KiB
Plaintext
#
|
|
# Copyright (C) 2021 OpenWrt.org
|
|
#
|
|
|
|
[ -e /etc/config/ubootenv ] && exit 0
|
|
|
|
touch /etc/config/ubootenv
|
|
|
|
. /lib/uboot-envtools.sh
|
|
. /lib/functions.sh
|
|
|
|
board=$(board_name)
|
|
|
|
ubootenv_add_mmc_default() {
|
|
ubootenv_add_mmc "ubootenv" "${1:-mmcblk0}" "0x0" "0x40000" "0x40000" "1"
|
|
ubootenv_add_mmc "ubootenv" "${1:-mmcblk0}" "0x40000" "0x40000" "0x40000" "1"
|
|
}
|
|
|
|
ubootenv_add_nor_default() {
|
|
ubootenv_add_mtd "u-boot-env" "0x0" "0x20000" "0x20000" "1"
|
|
ubootenv_add_mtd "u-boot-env" "0x20000" "0x20000" "0x20000" "1"
|
|
}
|
|
|
|
case "$board" in
|
|
abt,asr3000|\
|
|
acer,predator-w6x-ubootmod|\
|
|
asus,zenwifi-bt8-ubootmod|\
|
|
cmcc,a10-ubootmod|\
|
|
cudy,tr3000-v1-ubootmod|\
|
|
h3c,magic-nx30-pro|\
|
|
jcg,q30-pro|\
|
|
konka,komi-a31|\
|
|
mercusys,mr90x-v1-ubi|\
|
|
netcore,n60|\
|
|
netcore,n60-pro|\
|
|
netis,nx31|\
|
|
nokia,ea0326gmp|\
|
|
qihoo,360t7|\
|
|
routerich,ax3000-ubootmod|\
|
|
snr,snr-cpe-ax2|\
|
|
tplink,tl-xdr4288|\
|
|
tplink,tl-xdr6086|\
|
|
tplink,tl-xdr6088|\
|
|
tplink,tl-xtr8488|\
|
|
xiaomi,mi-router-ax3000t-ubootmod|\
|
|
xiaomi,mi-router-wr30u-ubootmod|\
|
|
xiaomi,redmi-router-ax6000-ubootmod|\
|
|
zyxel,ex5601-t0-ubootmod)
|
|
ubootenv_add_ubi_default
|
|
;;
|
|
acer,predator-w6|\
|
|
acer,predator-w6d|\
|
|
acer,vero-w6m|\
|
|
glinet,gl-mt2500|\
|
|
glinet,gl-mt6000|\
|
|
glinet,gl-x3000|\
|
|
glinet,gl-xe3000|\
|
|
huasifei,wh3000|\
|
|
nradio,c8-668gl)
|
|
ubootenv_add_mmc "u-boot-env" "" "0x0" "0x80000"
|
|
;;
|
|
asus,rt-ax59u)
|
|
ubootenv_add_uci_config "/dev/mtd0" "0x100000" "0x20000" "0x20000"
|
|
;;
|
|
bananapi,bpi-r3|\
|
|
bananapi,bpi-r3-mini|\
|
|
bananapi,bpi-r4|\
|
|
bananapi,bpi-r4-lite|\
|
|
bananapi,bpi-r4-poe|\
|
|
cmcc,rax3000m|\
|
|
jdcloud,re-cp-03)
|
|
. /lib/upgrade/fit.sh
|
|
export_fitblk_bootdev
|
|
case "$CI_METHOD" in
|
|
ubi)
|
|
ubootenv_add_ubi_default
|
|
;;
|
|
emmc)
|
|
bootdev=${EMMC_KERN_DEV%%p[0-9]*}
|
|
ubootenv_add_mmc_default "${bootdev#/dev/}"
|
|
;;
|
|
default)
|
|
ubootenv_add_nor_default
|
|
;;
|
|
esac
|
|
;;
|
|
buffalo,wsr-6000ax8|\
|
|
mercusys,mr80x-v3|\
|
|
mercusys,mr90x-v1|\
|
|
routerich,ax3000|\
|
|
routerich,ax3000-v1|\
|
|
tenbay,wr3000k|\
|
|
tplink,re6000xd)
|
|
ubootenv_add_mtd "u-boot-env" "0x0" "0x20000" "0x20000" "1"
|
|
;;
|
|
comfast,cf-e393ax|\
|
|
iptime,ax3000m)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x80000"
|
|
;;
|
|
asiarf,ap7986-003|\
|
|
cetron,ct3003|\
|
|
edgecore,eap111|\
|
|
netgear,wax220|\
|
|
zbtlink,zbt-z8102ax|\
|
|
zbtlink,zbt-z8103ax)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
|
|
;;
|
|
dlink,aquila-pro-ai-m30-a1|\
|
|
dlink,aquila-pro-ai-m60-a1)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x40000"
|
|
;;
|
|
gatonetworks,gdsp)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000"
|
|
;;
|
|
glinet,gl-mt3000)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x20000"
|
|
;;
|
|
openembed,som7981)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x80000"
|
|
ubootenv_add_uci_sys_config "/dev/mtd3" "0x0" "0x100000" "0x100000"
|
|
;;
|
|
openwrt,one)
|
|
ubootenv_add_ubi_default
|
|
;;
|
|
smartrg,sdg-8733|\
|
|
smartrg,sdg-8733a|\
|
|
smartrg,sdg-8734)
|
|
ubootenv_add_mmc "u-boot-env" "mmcblk0" "0x0" "0x8000" "0x8000"
|
|
;;
|
|
tplink,archer-ax80-v1|\
|
|
tplink,be450)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000" "8"
|
|
;;
|
|
ubnt,unifi-6-plus)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x10000"
|
|
;;
|
|
teltonika,rutc50)
|
|
ubootenv_add_mtd "u-boot-env" "0x0" "0x10000" "0x10000"
|
|
;;
|
|
xiaomi,mi-router-ax3000t|\
|
|
xiaomi,mi-router-wr30u-stock|\
|
|
xiaomi,redmi-router-ax6000-stock)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x20000"
|
|
ubootenv_add_uci_sys_config "/dev/mtd2" "0x0" "0x10000" "0x20000"
|
|
;;
|
|
zyxel,ex5601-t0)
|
|
ubootenv_add_mtd "u-boot-env" "0x0" "0x20000" "0x40000" "2"
|
|
;;
|
|
zyxel,ex5700-telenor)
|
|
ubootenv_add_uci_config "/dev/ubootenv" "0x0" "0x4000" "0x4000" "1"
|
|
;;
|
|
esac
|
|
|
|
config_load ubootenv
|
|
config_foreach ubootenv_add_app_config
|
|
|
|
exit 0
|