Felix Fietkau 5dc134c542 Fix VLYNQ device enable for DG834Gv1 ... This patch allows VLYNQ devices on the DG834Gv1 to be successfully enabled. Currently the "__vlynq_enable_device" function attempts to set the VLYNQ device clock divisor to values from 1 through 8 until a link is successfully established. On the DG834Gv1 (but not the DG834Gv2), setting the VLYNQ device clock divisor to 1 (full rate) results in all further VLYNQ operations failing (including software reset), so the device is never enabled. This patches changes the function to only attempt divisors 2 through 8, and hence the device is successfully enabled. Signed-off-by: Nick Forbes <nick.forbes@huntsworth.com> --------- SVN-Revision: 9656		2007-12-04 12:49:54 +00:00
..
base-files/etc	we are using leds-gpio now	2007-10-11 01:39:24 +00:00
files	Fix VLYNQ device enable for DG834Gv1	2007-12-04 12:49:54 +00:00
image	make the image filenames a bit shorter	2007-11-10 23:08:11 +00:00
patches-2.6.23	switch ar7 to 2.6.23	2007-10-10 06:23:39 +00:00
profiles	use acx-mac80211 in profile	2007-10-11 02:38:23 +00:00
src	strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.	2007-09-06 16:27:37 +00:00
base-files.mk	strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.	2007-09-06 16:27:37 +00:00
config-2.6.23	enable NETDEVICES_MULTIQUEUE	2007-10-13 02:27:46 +00:00
Makefile	We are now at .23.1	2007-10-23 08:13:12 +00:00